Resources

A student sets up a one-dimensional vertical coordinate axis where the origin y=0y = 0 is fixed at the base of a vertical cliff of height h=80.0 mh = 80.0\text{ m}, with the positive direction defined strictly upward (+y+y upward). A rock is thrown vertically downward from the edge of the cliff (y0=+80.0 my_0 = +80.0\text{ m}) with an initial speed of 12.0 m/s12.0\text{ m/s}. Using standard vector component notation with g=9.80 m/s2g = 9.80\text{ m/s}^2, write the initial velocity component v0yv_{0y} and acceleration component aya_y, and calculate the signed position coordinate yy and velocity component vyv_y of the rock at t=2.00 st = 2.00\text{ s}.

Answer and steps

Final answer

v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2, y(2.00 s)=+36.4 my(2.00\text{ s}) = +36.4\text{ m}, and vy(2.00 s)=−31.6 m/sv_y(2.00\text{ s}) = -31.6\text{ m/s}

Steps

01

Establish the Coordinate System and Sign Conventions

In one-dimensional kinematics, vector components are signed quantities indicating both magnitude and direction along the chosen axis:

  • The vertical axis is oriented with upward as positive (+y+y).
  • The origin y=0 my = 0\text{ m} is at the base of the cliff.
  • The initial position at the cliff's top is y0=+80.0 my_0 = +80.0\text{ m}.

Since the rock is thrown downward, its initial velocity points in the negative yy-direction: v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s}

The acceleration due to gravity always acts downward toward the center of the Earth, which corresponds to the negative direction: ay=−g=−9.80 m/s2a_y = -g = -9.80\text{ m/s}^2

Common Pitfall: A frequent mistake is using ay=+9.80 m/s2a_y = +9.80\text{ m/s}^2 simply because the object is moving downward. The sign of acceleration depends strictly on the physical direction of the net force relative to your chosen positive coordinate axis, not on the direction of travel.


02

Determine the Velocity Component at t=2.00 st = 2.00\text{ s}

Using the kinematic equation for velocity under constant acceleration: vy(t)=v0y+aytv_y(t) = v_{0y} + a_y t

Substitute the known values at t=2.00 st = 2.00\text{ s}: vy(2.00 s)=−12.0 m/s+(−9.80 m/s2)(2.00 s)v_y(2.00\text{ s}) = -12.0\text{ m/s} + (-9.80\text{ m/s}^2)(2.00\text{ s}) vy(2.00 s)=−12.0 m/s−19.60 m/s=−31.6 m/sv_y(2.00\text{ s}) = -12.0\text{ m/s} - 19.60\text{ m/s} = -31.6\text{ m/s}

The negative sign confirms that the rock is still traveling downward with a speed of 31.6 m/s31.6\text{ m/s}.


03

Determine the Position Coordinate at t=2.00 st = 2.00\text{ s}

Using the kinematic equation for position as a function of time: y(t)=y0+v0yt+12ayt2y(t) = y_0 + v_{0y} t + \frac{1}{2}a_y t^2

Substitute the initial conditions and time t=2.00 st = 2.00\text{ s}: y(2.00 s)=80.0 m+(−12.0 m/s)(2.00 s)+12(−9.80 m/s2)(2.00 s)2y(2.00\text{ s}) = 80.0\text{ m} + (-12.0\text{ m/s})(2.00\text{ s}) + \frac{1}{2}(-9.80\text{ m/s}^2)(2.00\text{ s})^2 y(2.00 s)=80.0 m−24.0 m−12(9.80)(4.00) my(2.00\text{ s}) = 80.0\text{ m} - 24.0\text{ m} - \frac{1}{2}(9.80)(4.00)\text{ m} y(2.00 s)=80.0 m−24.0 m−19.60 my(2.00\text{ s}) = 80.0\text{ m} - 24.0\text{ m} - 19.60\text{ m} y(2.00 s)=+36.4 my(2.00\text{ s}) = +36.4\text{ m}

The rock is located 36.4 m36.4\text{ m} above the base of the cliff at t=2.00 st = 2.00\text{ s}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats downward motion as positive by omitting the negative sign for initial downward velocity while keeping acceleration negative.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0y=12.0 m/sv_{0y} = 12.0\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2

    Correct

    v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2

    Because the coordinate system defines +y+y strictly upward and the rock is thrown downward, the initial velocity vector points in the negative direction, requiring v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s}.

  2. Step 2

    y=y0+v0yt+12ayt2  ⟹  y=80.0+(12.0)(2.00)+0.5(−9.80)(2.00)2  ⟹  y=80.0+24.0−19.60=+84.4 my = y_0 + v_{0y} t + \frac{1}{2}a_y t^2 \implies y = 80.0 + (12.0)(2.00) + 0.5(-9.80)(2.00)^2 \implies y = 80.0 + 24.0 - 19.60 = +84.4\text{ m}

    Correct

    y=y0+v0yt+12ayt2=80.0+(−12.0)(2.00)+12(−9.80)(2.00)2=+36.4 my = y_0 + v_{0y} t + \frac{1}{2}a_y t^2 = 80.0 + (-12.0)(2.00) + \frac{1}{2}(-9.80)(2.00)^2 = +36.4\text{ m}

    Your kinematic formula and arithmetic were executed properly, but substituting +12.0 m/s+12.0\text{ m/s} instead of −12.0 m/s-12.0\text{ m/s} propagated to an incorrect position above the cliff top (+84.4 m+84.4\text{ m}).

  3. Step 3

    vy=v0y+ayt  ⟹  vy=12.0+(−9.80)(2.00)  ⟹  vy=12.0−19.60=−7.6 m/sv_y = v_{0y} + a_y t \implies v_y = 12.0 + (-9.80)(2.00) \implies v_y = 12.0 - 19.60 = -7.6\text{ m/s}

    Correct

    vy=v0y+ayt=−12.0+(−9.80)(2.00)=−31.6 m/sv_y = v_{0y} + a_y t = -12.0 + (-9.80)(2.00) = -31.6\text{ m/s}

    Your velocity equation and algebraic evaluation were correct, but carrying forward +12.0 m/s+12.0\text{ m/s} produced an incorrect velocity component.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly assigned a negative sign to the downward gravitational acceleration component ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2.

You selected the correct kinematic equations for constant-acceleration position and velocity.

You performed all algebraic substitutions and arithmetic operations accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error on Velocity Component

You substituted the initial speed 12.0 m/s12.0\text{ m/s} as a positive scalar rather than assigning it a negative vector component for downward motion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused scalar speed with signed vector components along a fixed axis, treating the downward direction as negative for acceleration while leaving initial velocity positive.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Component Sign Rule
  • In 1D kinematics, any vector quantity pointing opposite to the chosen positive axis must carry a negative sign, regardless of whether it is velocity, displacement, or acceleration.

  • Before writing kinematic formulas, draw an arrow for each vector and compare its orientation directly to the +y+y axis arrow.

Physical Sanity Check
  • An object thrown downward from a height of 80.0 m80.0\text{ m} cannot be higher than 80.0 m80.0\text{ m} at a later time.

  • Check whether your calculated position (84.4 m84.4\text{ m}) makes physical sense for a rock thrown downward.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s} and ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2 to reflect that both vectors point downward along an upward +y+y axis.

  2. Substitute v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s} into the position equation: y(2.00 s)=80.0+(−12.0)(2.00)+12(−9.80)(2.00)2=80.0−24.0−19.60=+36.4 my(2.00\text{ s}) = 80.0 + (-12.0)(2.00) + \frac{1}{2}(-9.80)(2.00)^2 = 80.0 - 24.0 - 19.60 = +36.4\text{ m}.

  3. Substitute v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s} into the velocity equation: vy(2.00 s)=−12.0+(−9.80)(2.00)=−12.0−19.60=−31.6 m/sv_y(2.00\text{ s}) = -12.0 + (-9.80)(2.00) = -12.0 - 19.60 = -31.6\text{ m/s}.

Final answer

v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2, y(2.00 s)=+36.4 my(2.00\text{ s}) = +36.4\text{ m}, and vy(2.00 s)=−31.6 m/sv_y(2.00\text{ s}) = -31.6\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice explicitly sketching an axis with arrows for each initial vector quantity before writing equations.

  • Perform a quick physical sanity check on position values to confirm that downward motion decreases vertical height.

OverviewACEpath Teacher's Diagnosis

02 The student assumes acceleration due to gravity is always positive (+9.80 m/s²), conflicting with the upward coordinate definition.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s}, ay=9.80 m/s2a_y = 9.80\text{ m/s}^2

    Correct

    v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2

    With the coordinate axis oriented vertically upward (+y+y), any vector pointing downward must have a negative component. Since gravity always pulls downward toward Earth, the acceleration component along this axis must be ay=−g=−9.80 m/s2a_y = -g = -9.80\text{ m/s}^2.

  2. Step 2

    y=y0+v0yt+12ayt2  ⟹  y=80.0+(−12.0)(2.00)+0.5(9.80)(2.00)2  ⟹  y=80.0−24.0+19.60=+75.6 my = y_0 + v_{0y}t + \frac{1}{2}a_y t^2 \implies y = 80.0 + (-12.0)(2.00) + 0.5(9.80)(2.00)^2 \implies y = 80.0 - 24.0 + 19.60 = +75.6\text{ m}

    Correct

    y(2.00 s)=80.0 m+(−12.0 m/s)(2.00 s)+12(−9.80 m/s2)(2.00 s)2=+36.4 my(2.00\text{ s}) = 80.0\text{ m} + (-12.0\text{ m/s})(2.00\text{ s}) + \frac{1}{2}(-9.80\text{ m/s}^2)(2.00\text{ s})^2 = +36.4\text{ m}

    You chose the correct kinematic relation and correctly evaluated the arithmetic, but using ay=+9.80 m/s2a_y = +9.80\text{ m/s}^2 caused the displacement due to gravity to add height instead of decreasing it.

  3. Step 3

    vy=v0y+ayt  ⟹  vy=−12.0+(9.80)(2.00)  ⟹  vy=−12.0+19.60=+7.6 m/sv_y = v_{0y} + a_y t \implies v_y = -12.0 + (9.80)(2.00) \implies v_y = -12.0 + 19.60 = +7.6\text{ m/s}

    Correct

    vy(2.00 s)=−12.0 m/s+(−9.80 m/s2)(2.00 s)=−31.6 m/sv_y(2.00\text{ s}) = -12.0\text{ m/s} + (-9.80\text{ m/s}^2)(2.00\text{ s}) = -31.6\text{ m/s}

    You selected the correct formula for velocity under constant acceleration, but substituting positive acceleration resulted in a rock thrown downward speeding up in the upward direction, rather than accelerating downward to −31.6 m/s-31.6\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected the standard constant-acceleration kinematic equations for vertical position and velocity.

You correctly identified the cliff top as y0=+80.0 my_0 = +80.0\text{ m} and gave the downward initial velocity a negative sign (v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s}).

You performed all intermediate algebraic substitutions and arithmetic operations accurately based on your chosen values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Coordinate Sign Convention Error

You treated acceleration due to gravity as a positive scalar magnitude (+9.80 m/s2+9.80\text{ m/s}^2) instead of a signed vector component oriented along the chosen +y+y axis.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the physical direction of acceleration with the sign of motion or treating gg as an unsigned number in vector equations. When the vertical axis points upward, every vector directed downward—whether displacement, velocity, or acceleration—must take a negative component, regardless of whether the object is moving up or down.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish Vector Components Along the Axis
  • If the positive coordinate direction is upward (+y+y), then any downward-pointing vector has a negative component: a⃗=−gȷ^  ⟹  ay=−9.80 m/s2\vec{a} = -g\hat{\jmath} \implies a_y = -9.80\text{ m/s}^2.

  • Before writing equations, draw an axis arrow pointing in the positive direction and explicitly write signs for every vector: y0y_0, v0yv_{0y}, and aya_y.

Physical Reality Check
  • An object thrown downward in free fall must speed up in the downward direction (∣vy∣|v_y| increases, vyv_y becomes more negative).

  • Verify that your calculated velocity at a later time is directed downward and has a magnitude greater than the initial speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2 to match the downward direction of gravity on an upward-positive coordinate system.

  2. Recalculate position: y(2.00)=80.0+(−12.0)(2.00)+12(−9.80)(2.00)2=80.0−24.0−19.60=+36.4 my(2.00) = 80.0 + (-12.0)(2.00) + \frac{1}{2}(-9.80)(2.00)^2 = 80.0 - 24.0 - 19.60 = +36.4\text{ m}.

  3. Recalculate velocity: vy(2.00)=−12.0+(−9.80)(2.00)=−12.0−19.60=−31.6 m/sv_y(2.00) = -12.0 + (-9.80)(2.00) = -12.0 - 19.60 = -31.6\text{ m/s}.

Final answer

v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2, y(2.00 s)=+36.4 my(2.00\text{ s}) = +36.4\text{ m}, vy(2.00 s)=−31.6 m/sv_y(2.00\text{ s}) = -31.6\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how vector signs are defined by comparing vector arrows to your coordinate axis arrow.

  • Practice drawing free-body diagrams alongside coordinate axes to assign the sign of acceleration before doing any algebra.

  • Perform a qualitative sanity check on final answers: check if position decreased and whether speed increased downward.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to include the initial cliff elevation y0 = +80.0 m when calculating position, effectively taking the launch point as the origin.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v0y=−12.0 m/s  ⟹  ay=−9.80 m/s2v_{0y} = -12.0\text{ m/s} \implies a_y = -9.80\text{ m/s}^2

  2. Step 2

    y=v0yt+12ayt2  ⟹  y=(−12.0)(2.00)+0.5(−9.80)(2.00)2  ⟹  y=−24.0−19.60=−43.6 my = v_{0y}t + \frac{1}{2}a_y t^2 \implies y = (-12.0)(2.00) + 0.5(-9.80)(2.00)^2 \implies y = -24.0 - 19.60 = -43.6\text{ m}

    Correct

    y(t)=y0+v0yt+12ayt2=80.0 m+(−12.0 m/s)(2.00 s)+12(−9.80 m/s2)(2.00 s)2=+36.4 my(t) = y_0 + v_{0y}t + \frac{1}{2}a_y t^2 = 80.0\text{ m} + (-12.0\text{ m/s})(2.00\text{ s}) + \frac{1}{2}(-9.80\text{ m/s}^2)(2.00\text{ s})^2 = +36.4\text{ m}

    You calculated the displacement Δy=−43.6 m\Delta y = -43.6\text{ m} relative to the launch point rather than the coordinate position yy relative to the origin at the base of the cliff. Since the rock starts at y0=+80.0 my_0 = +80.0\text{ m}, you need to add y0y_0 to find the position: y=80.0 m−43.6 m=+36.4 my = 80.0\text{ m} - 43.6\text{ m} = +36.4\text{ m}.

  3. Step 3

    vy=v0y+ayt  ⟹  vy=−12.0+(−9.80)(2.00)  ⟹  vy=−12.0−19.60=−31.6 m/sv_y = v_{0y} + a_y t \implies v_y = -12.0 + (-9.80)(2.00) \implies v_y = -12.0 - 19.60 = -31.6\text{ m/s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the negative signs for both downward velocity and gravitational acceleration.

You accurately substituted values and evaluated the vertical velocity at t=2.00 st = 2.00\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Initial Coordinate Position

You solved for the vertical displacement Δy\Delta y instead of the position coordinate yy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the launch point as the origin y=0y = 0 by using y=v0yt+12ayt2y = v_{0y}t + \frac{1}{2}a_y t^2 instead of the full position formula y(t)=y0+v0yt+12ayt2y(t) = y_0 + v_{0y}t + \frac{1}{2}a_y t^2, overlooking that the origin was specified at the base of the cliff.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Position from Displacement
  • Displacement is Δy=y−y0\Delta y = y - y_0. When the origin is not at the launch point, y0≠0y_0 \neq 0, so y(t)=y0+Δyy(t) = y_0 + \Delta y.

  • Always mark the origin on a sketch and write the full kinematic equation with y0y_0 explicitly included.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start with the full kinematic position equation: y(t)=y0+v0yt+12ayt2y(t) = y_0 + v_{0y}t + \frac{1}{2}a_y t^2.

  2. Substitute the given initial position y0=+80.0 my_0 = +80.0\text{ m} alongside the displacement terms: y(2.00 s)=80.0 m+(−43.6 m)y(2.00\text{ s}) = 80.0\text{ m} + (-43.6\text{ m}).

  3. Evaluate the final sum: y(2.00 s)=+36.4 my(2.00\text{ s}) = +36.4\text{ m}.

Final answer

v0y=−12.0 m/sv_{0y} = -12.0\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2, y(2.00 s)=+36.4 my(2.00\text{ s}) = +36.4\text{ m}, and vy(2.00 s)=−31.6 m/sv_y(2.00\text{ s}) = -31.6\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up formulas, sketch the vertical axis with both the origin (y=0y = 0) and the initial object location (y0y_0) clearly labeled.

  • Write y(t)=y0+v0yt+12ayt2y(t) = y_0 + v_{0y}t + \frac{1}{2}a_y t^2 as your default template to avoid forgetting non-zero initial positions.

Lock it in

Similar question

01

A ball is dropped from rest from a balcony at y0=+45.0 my_0 = +45.0\text{ m} with +y+y directed upward and the ground at y=0y = 0. Determine the ball's position coordinate yy and velocity component vyv_y at t=1.50 st = 1.50\text{ s} using g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

y(1.50 s)=+34.0 my(1.50\text{ s}) = +34.0\text{ m} and vy(1.50 s)=−14.7 m/sv_y(1.50\text{ s}) = -14.7\text{ m/s}. Key steps: v0y=0v_{0y} = 0, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2; y=45.0+0−12(9.80)(1.50)2=45.0−11.025=33.975 m≈+34.0 my = 45.0 + 0 - \frac{1}{2}(9.80)(1.50)^2 = 45.0 - 11.025 = 33.975\text{ m} \approx +34.0\text{ m}; vy=0−9.80(1.50)=−14.7 m/sv_y = 0 - 9.80(1.50) = -14.7\text{ m/s}.

02

With +y+y defined strictly upward, an arrow is shot vertically downward from a cliff at y0=+100 my_0 = +100\text{ m} with an initial speed of 20.0 m/s20.0\text{ m/s}. Calculate its velocity component vyv_y and position coordinate yy at t=3.00 st = 3.00\text{ s} (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

vy(3.00 s)=−49.4 m/sv_y(3.00\text{ s}) = -49.4\text{ m/s} and y(3.00 s)=−4.1 my(3.00\text{ s}) = -4.1\text{ m} (the arrow has passed the base of the cliff). Key steps: v0y=−20.0 m/sv_{0y} = -20.0\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2; vy=−20.0+(−9.80)(3.00)=−49.4 m/sv_y = -20.0 + (-9.80)(3.00) = -49.4\text{ m/s}; y=100+(−20.0)(3.00)+12(−9.80)(3.00)2=100−60.0−44.1=−4.1 my = 100 + (-20.0)(3.00) + \frac{1}{2}(-9.80)(3.00)^2 = 100 - 60.0 - 44.1 = -4.1\text{ m}.

03

A rocket launched vertically upward shuts off its engines at y1=+150 my_1 = +150\text{ m} while traveling downward at 25.0 m/s25.0\text{ m/s}. Taking +y+y upward and g=9.80 m/s2g = 9.80\text{ m/s}^2, how long after engine shutoff does it take for the rocket to reach y=+50.0 my = +50.0\text{ m}?

Answer

t≈2.76 st \approx 2.76\text{ s}. Key steps: y0=+150 my_0 = +150\text{ m}, y=+50.0 my = +50.0\text{ m}, v0y=−25.0 m/sv_{0y} = -25.0\text{ m/s}, ay=−9.80 m/s2a_y = -9.80\text{ m/s}^2. Set 50.0=150−25.0t−4.90t2  ⟹  4.90t2+25.0t−100=050.0 = 150 - 25.0t - 4.90t^2 \implies 4.90t^2 + 25.0t - 100 = 0. Using the quadratic formula, the positive root is t=−25.0+25.02−4(4.90)(−100)2(4.90)=−25.0+625+19609.80=−25.0+50.849.80≈2.76 st = \frac{-25.0 + \sqrt{25.0^2 - 4(4.90)(-100)}}{2(4.90)} = \frac{-25.0 + \sqrt{625 + 1960}}{9.80} = \frac{-25.0 + 50.84}{9.80} \approx 2.76\text{ s}.

Loading workspace…