Resources

A particle moves at a constant speed of v=10.0 m/sv = 10.0\text{ m/s} in a counterclockwise circle in the xyxy-plane centered at the origin. At time t1t_1, the particle is at (R,0)(R, 0) moving due north with velocity v⃗1=10.0ȷ^ m/s\vec{v}_1 = 10.0\hat{\jmath}\text{ m/s}. At time t2t_2, after completing one quarter of a revolution, the particle is at (0,R)(0, R) moving due west with velocity v⃗2=−10.0ı^ m/s\vec{v}_2 = -10.0\hat{\imath}\text{ m/s}. (a) Calculate the velocity change vector Δv⃗=v⃗2−v⃗1\Delta\vec{v} = \vec{v}_2 - \vec{v}_1, its magnitude ∣Δv⃗∣|\Delta\vec{v}|, and its direction angle. (b) Explain the counter-intuitive result: why is ∣Δv⃗∣≠0|\Delta\vec{v}| \neq 0 even though the speed of the particle did not change at all (∣v⃗2∣=∣v⃗1∣=10.0 m/s|\vec{v}_2| = |\vec{v}_1| = 10.0\text{ m/s})? (c) Contrast the direction of Δv⃗\Delta\vec{v} with the instantaneous acceleration vector at the midpoint of the quarter-turn.

Answer and steps

Final answer

(a) Δv⃗=−10.0ı^−10.0ȷ^ m/s\Delta\vec{v} = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s}, ∣Δv⃗∣=14.1 m/s|\Delta\vec{v}| = 14.1\text{ m/s}, directed at 225∘225^\circ counterclockwise from +x+x (southwest); (b) Velocity is a vector quantity possessing both magnitude and direction; a change in the direction of the vector produces a non-zero vector difference Δv⃗\Delta\vec{v} despite constant scalar speed, proving that acceleration measures the rate of change of vector velocity; (c) At the quarter-turn midpoint (45∘45^\circ), the instantaneous centripetal acceleration points directly inward toward the origin (angle 225∘225^\circ), perfectly collinear with the average velocity change vector Δv⃗\Delta\vec{v}.

Steps

Part (a): Calculating the Velocity Change Vector

The change in velocity over the time interval is defined as the vector difference between the final velocity and the initial velocity: Δv⃗=v⃗2−v⃗1\Delta\vec{v} = \vec{v}_2 - \vec{v}_1

Given:

  • Initial velocity: v⃗1=10.0ȷ^ m/s\vec{v}_1 = 10.0\hat{\jmath}\text{ m/s}
  • Final velocity: v⃗2=−10.0ı^ m/s\vec{v}_2 = -10.0\hat{\imath}\text{ m/s}

Substitute these vectors into the equation: Δv⃗=−10.0ı^−10.0ȷ^ m/s\Delta\vec{v} = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s}

  1. Magnitude: Using the Pythagorean theorem for vector components: ∣Δv⃗∣=(−10.0)2+(−10.0)2=100+100=200≈14.1 m/s|\Delta\vec{v}| = \sqrt{(-10.0)^2 + (-10.0)^2} = \sqrt{100 + 100} = \sqrt{200} \approx 14.1\text{ m/s}
  2. Direction: Since both the xx-component and yy-component are negative, the vector lies in the third quadrant (pointing southwest). θ=180∘+arctan⁡(−10.0−10.0)=180∘+45∘=225∘\theta = 180^\circ + \arctan\left(\frac{-10.0}{-10.0}\right) = 180^\circ + 45^\circ = 225^\circ measured counterclockwise from the positive xx-axis.

Part (b): Why ∣Δv⃗∣≠0|\Delta\vec{v}| \neq 0 When Speed Is Constant

A common pitfall is confusing the magnitude of the change in velocity (∣Δv⃗∣|\Delta\vec{v}|) with the change in speed (Δv=∣v⃗2∣−∣v⃗1∣\Delta v = |\vec{v}_2| - |\vec{v}_1|):

  • Speed is a scalar quantity indicating how fast an object moves. Here, the speed is constant: Δv=∣v⃗2∣−∣v⃗1∣=10.0 m/s−10.0 m/s=0 m/s\Delta v = |\vec{v}_2| - |\vec{v}_1| = 10.0\text{ m/s} - 10.0\text{ m/s} = 0\text{ m/s}
  • Velocity is a vector quantity that specifies both speed and direction. Even though the length of the velocity arrow remains 10.0 m/s10.0\text{ m/s}, the arrow rotated by 90∘90^\circ (from north to west).

Because vectors subtract component by component, changing the direction of motion always requires a non-zero vector difference: ∣Δv⃗∣=∣v⃗2−v⃗1∣≠∣v⃗2∣−∣v⃗1∣|\Delta\vec{v}| = |\vec{v}_2 - \vec{v}_1| \neq |\vec{v}_2| - |\vec{v}_1|

Acceleration is defined as the rate of change of vector velocity (a⃗avg=Δv⃗Δt\vec{a}_{\text{avg}} = \frac{\Delta\vec{v}}{\Delta t}), so any change in direction requires an acceleration, even when speed is constant.


Part (c): Direction of Δv⃗\Delta\vec{v} vs. Instantaneous Acceleration at the Midpoint

  1. Average acceleration / velocity change: The average acceleration a⃗avg=Δv⃗Δt\vec{a}_{\text{avg}} = \frac{\Delta\vec{v}}{\Delta t} points in the exact same direction as Δv⃗\Delta\vec{v}, which is at an angle of 225∘225^\circ (southwest, toward the center).
  2. Instantaneous acceleration at the midpoint: The midpoint of the quarter-turn occurs at an angular position of θ=45∘\theta = 45^\circ along the circular path: r⃗mid=Rcos⁡(45∘)ı^+Rsin⁡(45∘)ȷ^\vec{r}_{\text{mid}} = R\cos(45^\circ)\hat{\imath} + R\sin(45^\circ)\hat{\jmath} In uniform circular motion, the instantaneous acceleration is strictly centripetal—it points directly toward the center of curvature (the origin): a^inst=−r^=−cos⁡(45∘)ı^−sin⁡(45∘)ȷ^\hat{a}_{\text{inst}} = -\hat{r} = -\cos(45^\circ)\hat{\imath} - \sin(45^\circ)\hat{\jmath} This vector points in the direction of 180∘+45∘=225∘180^\circ + 45^\circ = 225^\circ.

Therefore, the direction of the finite velocity change Δv⃗\Delta\vec{v} over the entire quarter-turn is identical and collinear to the direction of the instantaneous acceleration vector at the symmetric midpoint of the interval.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student subtracts the speeds as scalars rather than subtracting the velocity vectors, incorrectly concluding that the change in velocity is zero.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δv=v2−v1  ⟹  ∣Δv∣=10.0−10.0=0 m/s  ⟹  There is no direction since the magnitude is 0.\Delta v = v_2 - v_1 \implies |\Delta v| = 10.0 - 10.0 = 0\text{ m/s} \implies \text{There is no direction since the magnitude is } 0.

    Correct

    Δv⃗=v⃗2−v⃗1=−10.0ı^−10.0ȷ^ m/s  ⟹  ∣Δv⃗∣=(−10.0)2+(−10.0)2≈14.1 m/s,θ=225∘\Delta\vec{v} = \vec{v}_2 - \vec{v}_1 = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s} \implies |\Delta\vec{v}| = \sqrt{(-10.0)^2 + (-10.0)^2} \approx 14.1\text{ m/s}, \quad \theta = 225^\circ

    Velocity is a vector quantity with both magnitude and direction, so you must subtract the vector components rather than subtracting scalar speeds: Δv⃗=v⃗2−v⃗1=(−10.0ı^)−(10.0ȷ^) m/s\Delta\vec{v} = \vec{v}_2 - \vec{v}_1 = (-10.0\hat{\imath}) - (10.0\hat{\jmath})\text{ m/s}.

  2. Step 2

    Speed is constant, so ∣Δv∣ must be zero because the particle never sped up or slowed down.\text{Speed is constant, so } |\Delta v| \text{ must be zero because the particle never sped up or slowed down.}

    Correct

    Even though speed ∣v⃗∣ is constant, the direction of v⃗ rotates by 90∘, producing a non-zero vector change ∣Δv⃗∣≠0.\text{Even though speed } |\vec{v}| \text{ is constant, the direction of } \vec{v} \text{ rotates by } 90^\circ\text{, producing a non-zero vector change } |\Delta\vec{v}| \neq 0.

    You treated the change in vector velocity ∣Δv⃗∣|\Delta\vec{v}| as if it were the change in scalar speed Δ∣v⃗∣\Delta |\vec{v}|. A turn at constant speed still requires acceleration because the direction changes.

  3. Step 3

    At the midpoint, the centripetal acceleration points toward the center, but Δv is zero so it has no direction to compare.\text{At the midpoint, the centripetal acceleration points toward the center, but } \Delta v \text{ is zero so it has no direction to compare.}

    Correct

    At the midpoint (θ=45∘), a⃗inst points at 225∘ (toward the center), which is collinear and identical in direction to Δv⃗.\text{At the midpoint (}\theta = 45^\circ\text{), } \vec{a}_{\text{inst}} \text{ points at } 225^\circ\text{ (toward the center), which is collinear and identical in direction to } \Delta\vec{v}.

    You correctly observed that centripetal acceleration points toward the center of the circle, but your comparison was affected by your earlier conclusion that Δv⃗=0\Delta\vec{v} = 0.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that the scalar speed of the particle remains constant throughout the motion.

You correctly identified that the instantaneous centripetal acceleration points toward the center of the circular path.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scalar vs. Vector Velocity Subtraction

You wrote Δv=v2−v1=10.0−10.0=0 m/s\Delta v = v_2 - v_1 = 10.0 - 10.0 = 0\text{ m/s} as scalar subtraction rather than computing the vector difference Δv⃗=v⃗2−v⃗1\Delta\vec{v} = \vec{v}_2 - \vec{v}_1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the change in speed Δv=∣v⃗2∣−∣v⃗1∣\Delta v = |\vec{v}_2| - |\vec{v}_1| with the magnitude of the change in velocity ∣Δv⃗∣=∣v⃗2−v⃗1∣|\Delta\vec{v}| = |\vec{v}_2 - \vec{v}_1|, overlooking that changing direction produces acceleration even when speed is constant.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Subtraction vs. Scalar Difference
  • ∣v⃗2−v⃗1∣≠∣v⃗2∣−∣v⃗1∣|\vec{v}_2 - \vec{v}_1| \neq |\vec{v}_2| - |\vec{v}_1| when the vectors point in different directions.

  • Always write vectors in unit-vector component form before subtracting: Δv⃗=(v2x−v1x)ı^+(v2y−v1y)ȷ^\Delta\vec{v} = (v_{2x} - v_{1x})\hat{\imath} + (v_{2y} - v_{1y})\hat{\jmath}.

Acceleration in Circular Motion
  • Acceleration is defined as a⃗=dv⃗dt\vec{a} = \frac{d\vec{v}}{dt}. Changing vector direction requires acceleration even at constant speed.

  • Remember that uniform circular motion is accelerated motion because velocity continuously changes its direction toward the center.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. v⃗1=0ı^+10.0ȷ^ m/s\vec{v}_1 = 0\hat{\imath} + 10.0\hat{\jmath}\text{ m/s} and v⃗2=−10.0ı^+0ȷ^ m/s\vec{v}_2 = -10.0\hat{\imath} + 0\hat{\jmath}\text{ m/s}.

  2. Δv⃗=v⃗2−v⃗1=(−10.0−0)ı^+(0−10.0)ȷ^=−10.0ı^−10.0ȷ^ m/s\Delta\vec{v} = \vec{v}_2 - \vec{v}_1 = (-10.0 - 0)\hat{\imath} + (0 - 10.0)\hat{\jmath} = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s}.

  3. ∣Δv⃗∣=(−10.0)2+(−10.0)2=200≈14.1 m/s|\Delta\vec{v}| = \sqrt{(-10.0)^2 + (-10.0)^2} = \sqrt{200} \approx 14.1\text{ m/s}.

  4. Direction: θ=180∘+arctan⁡(−10.0−10.0)=225∘\theta = 180^\circ + \arctan\left(\frac{-10.0}{-10.0}\right) = 225^\circ (southwest, toward the origin).

  5. At the midpoint (45∘45^\circ), the inward centripetal acceleration vector also points at 225∘225^\circ, matching the direction of Δv⃗\Delta\vec{v} exactly.

Final answer

(a) Δv⃗=−10.0ı^−10.0ȷ^ m/s\Delta\vec{v} = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s}, ∣Δv⃗∣=14.1 m/s|\Delta\vec{v}| = 14.1\text{ m/s}, at 225∘225^\circ; (b) Velocity is a vector; direction change yields ∣Δv⃗∣≠0|\Delta\vec{v}| \neq 0 even with constant speed; (c) Both point southwest (225∘225^\circ) toward the center.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing vector subtraction diagrams using the tip-to-tail or initial-to-final rule: Δv⃗=v⃗2−v⃗1=v⃗2+(−v⃗1)\Delta\vec{v} = \vec{v}_2 - \vec{v}_1 = \vec{v}_2 + (-\vec{v}_1).

  • Whenever a question asks for a change in velocity, write the vector arrows or unit vectors explicitly to prevent accidental scalar arithmetic.

OverviewACEpath Teacher's Diagnosis

02 The student computes Δv as v₁ - v₂ instead of v₂ - v₁, reversing the signs and resulting in a direction 180° opposite to the true change in velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δv=v1−v2  ⟹  Δv=10.0ȷ^−(−10.0ı^)=10.0ı^+10.0ȷ^ m/s\Delta v = v_1 - v_2 \implies \Delta v = 10.0\hat{\jmath} - (-10.0\hat{\imath}) = 10.0\hat{\imath} + 10.0\hat{\jmath}\text{ m/s}

    Correct

    Δv⃗=v⃗2−v⃗1=−10.0ı^−10.0ȷ^ m/s\Delta\vec{v} = \vec{v}_2 - \vec{v}_1 = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s}

    Change in any physical quantity is defined as final minus initial: Δv⃗=v⃗2−v⃗1\Delta\vec{v} = \vec{v}_2 - \vec{v}_1. You subtracted in reverse order, which inverted the signs of both vector components.

  2. Step 2

    ∣Δv∣=10.02+10.02=14.1 m/s  ⟹  θ=45∘ in the first quadrant|\Delta v| = \sqrt{10.0^2 + 10.0^2} = 14.1\text{ m/s} \implies \theta = 45^\circ\text{ in the first quadrant}

    Correct

    ∣Δv⃗∣=(−10.0)2+(−10.0)2=14.1 m/s|\Delta\vec{v}| = \sqrt{(-10.0)^2 + (-10.0)^2} = 14.1\text{ m/s}, directed at θ=225∘\theta = 225^\circ (southwest, third quadrant)

    Your magnitude calculation of 14.1 m/s14.1\text{ m/s} is correct, but your direction angle of 45∘45^\circ was shifted by 180∘180^\circ due to the reversed vector difference in step 1.

  3. Step 3

    Velocity is a vector with direction as well as magnitude, so turning changes the velocity vector even at constant speed.

  4. Step 4

    At the midpoint, the acceleration points toward the origin into the third quadrant (225°), which is opposite to the calculated Δv\Delta v pointing into the first quadrant (45°).

    Correct

    At the midpoint (45∘45^\circ), the instantaneous acceleration points toward the center (225∘225^\circ), which is collinear and in the exact same direction as Δv⃗\Delta\vec{v}.

    You correctly recognized that the centripetal acceleration at the midpoint points toward the origin (225∘225^\circ). Because of the sign error in part (a), you concluded it was opposite to Δv⃗\Delta\vec{v} rather than collinear and in the same direction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the magnitude of the velocity change vector as 14.1 m/s14.1\text{ m/s}.

You accurately explained why a constant-speed turn still requires a non-zero velocity change vector.

You correctly determined that the instantaneous acceleration at the midpoint points toward the origin at 225∘225^\circ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed vector subtraction order

You wrote Δv⃗=v⃗1−v⃗2\Delta\vec{v} = \vec{v}_1 - \vec{v}_2 instead of Δv⃗=v⃗2−v⃗1\Delta\vec{v} = \vec{v}_2 - \vec{v}_1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the definition of a change vector (final minus initial) with initial minus final, resulting in an overall negative factor that flips the vector by 180∘180^\circ.

REASONING PATH
Your ACEpath teacher’s suggested approach
Change Definition Rule
  • Any change ΔQ\Delta Q is always Qfinal−QinitialQ_{\text{final}} - Q_{\text{initial}}, never initial minus final.

  • Write down Δv⃗=v⃗2−v⃗1\Delta\vec{v} = \vec{v}_2 - \vec{v}_1 and label v⃗2\vec{v}_2 as final before substituting components.

Average Acceleration Alignment
  • Average acceleration a⃗avg=Δv⃗Δt\vec{a}_{\text{avg}} = \frac{\Delta\vec{v}}{\Delta t} must point inward toward the concave side of a curved trajectory.

  • Check that your resulting Δv⃗\Delta\vec{v} arrow points inward toward the center of the turn, not outward.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Δv⃗=v⃗2−v⃗1=−10.0ı^−10.0ȷ^ m/s\Delta\vec{v} = \vec{v}_2 - \vec{v}_1 = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s}

  2. ∣Δv⃗∣=(−10.0)2+(−10.0)2=200≈14.1 m/s|\Delta\vec{v}| = \sqrt{(-10.0)^2 + (-10.0)^2} = \sqrt{200} \approx 14.1\text{ m/s}

  3. Because both components are negative, θ=180∘+arctan⁡(−10.0−10.0)=225∘\theta = 180^\circ + \arctan\left(\frac{-10.0}{-10.0}\right) = 225^\circ (third quadrant, southwest).

  4. At the midpoint of the quarter-turn, centripetal acceleration points directly toward the origin at 225∘225^\circ, which is identical in direction to Δv⃗\Delta\vec{v}.

Final answer

(a) Δv⃗=−10.0ı^−10.0ȷ^ m/s\Delta\vec{v} = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s}, ∣Δv⃗∣=14.1 m/s|\Delta\vec{v}| = 14.1\text{ m/s}, θ=225∘\theta = 225^\circ; (b) Velocity is a vector with direction, so rotating the vector creates Δv⃗≠0⃗\Delta\vec{v} \neq \vec{0}; (c) Δv⃗\Delta\vec{v} and the midpoint instantaneous acceleration both point toward the origin at 225∘225^\circ.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out Δ=final−initial\Delta = \text{final} - \text{initial} as your first line to protect against reversing subtraction order.

  • Sketch v⃗1\vec{v}_1, v⃗2\vec{v}_2, and −v⃗1-\vec{v}_1 tip-to-tail to visually verify the quadrant of Δv⃗\Delta\vec{v} before doing component arithmetic.

  • Remember that Δv⃗\Delta\vec{v} must point toward the interior of any turn, matching the inward direction of acceleration.

OverviewACEpath Teacher's Diagnosis

03 The student adds the initial and final velocity vectors instead of subtracting them to find the change in velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δv⃗=v⃗2+v⃗1  ⟹  Δv⃗=−10.0ı^+10.0ȷ^ m/s\Delta\vec{v} = \vec{v}_2 + \vec{v}_1 \implies \Delta\vec{v} = -10.0\hat{\imath} + 10.0\hat{\jmath}\text{ m/s}

    Correct

    Δv⃗=v⃗2−v⃗1=−10.0ı^−10.0ȷ^ m/s\Delta\vec{v} = \vec{v}_2 - \vec{v}_1 = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s}

    Change in any physical quantity is defined as the final value minus the initial value: Δv⃗=v⃗2−v⃗1\Delta\vec{v} = \vec{v}_2 - \vec{v}_1. You wrote vector addition v⃗2+v⃗1\vec{v}_2 + \vec{v}_1 rather than vector subtraction.

  2. Step 2

    ∣Δv⃗∣=(−10.0)2+10.02=14.1 m/s  ⟹  θ=135∘ in the second quadrant|\Delta\vec{v}| = \sqrt{(-10.0)^2 + 10.0^2} = 14.1\text{ m/s} \implies \theta = 135^\circ\text{ in the second quadrant}

    Correct

    ∣Δv⃗∣=(−10.0)2+(−10.0)2≈14.1 m/s,θ=225∘ (third quadrant / southwest)|\Delta\vec{v}| = \sqrt{(-10.0)^2 + (-10.0)^2} \approx 14.1\text{ m/s}, \theta = 225^\circ\text{ (third quadrant / southwest)}

    Your magnitude computation correctly applied the Pythagorean theorem to your components, but because the yy-component had the wrong sign from Step 1, your angle pointed into the second quadrant (135∘135^\circ) instead of the third quadrant (225∘225^\circ).

  3. Step 3

    Because velocity is a vector, changing direction alters the vector components even when speed is constant.

  4. Step 4

    At the midpoint, the acceleration points toward the origin (225∘225^\circ), which is perpendicular to Δv⃗\Delta\vec{v} at 135∘135^\circ.

    Correct

    At the midpoint (45∘45^\circ), the instantaneous acceleration points toward the center (225∘225^\circ), which is exactly collinear and identical in direction to Δv⃗\Delta\vec{v}.

    You correctly identified that the centripetal acceleration at the midpoint points toward the origin at 225∘225^\circ. Your conclusion that it is perpendicular to Δv⃗\Delta\vec{v} was solely due to using your 135∘135^\circ vector from part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that velocity is a vector whose directional change requires acceleration.

You accurately calculated vector magnitude using the Pythagorean theorem.

You correctly determined that centripetal acceleration at the 45∘45^\circ midpoint points inward toward the origin at 225∘225^\circ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Vector Subtraction vs. Vector Addition

Writing Δv⃗=v⃗2+v⃗1\Delta\vec{v} = \vec{v}_2 + \vec{v}_1 instead of Δv⃗=v⃗2−v⃗1\Delta\vec{v} = \vec{v}_2 - \vec{v}_1.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating vector change ΔA⃗=A⃗final−A⃗initial\Delta\vec{A} = \vec{A}_\text{final} - \vec{A}_\text{initial} with vector combination/resultant A⃗1+A⃗2\vec{A}_1 + \vec{A}_2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Change (Delta)
  • For any vector u⃗\vec{u}, the change over an interval is always Δu⃗=u⃗final−u⃗initial=u⃗final+(−u⃗initial)\Delta\vec{u} = \vec{u}_\text{final} - \vec{u}_\text{initial} = \vec{u}_\text{final} + (-\vec{u}_\text{initial}).

  • Always write the definition Δv⃗=v⃗2−v⃗1\Delta\vec{v} = \vec{v}_2 - \vec{v}_1 first and negate the components of v⃗1\vec{v}_1 before adding.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Δv⃗=v⃗2−v⃗1=(−10.0ı^)−(10.0ȷ^)=−10.0ı^−10.0ȷ^ m/s\Delta\vec{v} = \vec{v}_2 - \vec{v}_1 = (-10.0\hat{\imath}) - (10.0\hat{\jmath}) = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s}

  2. ∣Δv⃗∣=(−10.0)2+(−10.0)2=200≈14.1 m/s|\Delta\vec{v}| = \sqrt{(-10.0)^2 + (-10.0)^2} = \sqrt{200} \approx 14.1\text{ m/s}

  3. θ=180∘+arctan⁡(−10.0−10.0)=225∘\theta = 180^\circ + \arctan\left(\frac{-10.0}{-10.0}\right) = 225^\circ (southwest)

  4. At the midpoint, a⃗inst\vec{a}_\text{inst} points at 225∘225^\circ, which is collinear and points in the exact same direction as Δv⃗\Delta\vec{v}.

Final answer

(a) Δv⃗=−10.0ı^−10.0ȷ^ m/s\Delta\vec{v} = -10.0\hat{\imath} - 10.0\hat{\jmath}\text{ m/s}, ∣Δv⃗∣=14.1 m/s|\Delta\vec{v}| = 14.1\text{ m/s}, θ=225∘\theta = 225^\circ; (b) Velocity is a vector, so a direction change produces Δv⃗≠0⃗\Delta\vec{v} \neq \vec{0}; (c) The direction of Δv⃗\Delta\vec{v} is identical and collinear to a⃗inst\vec{a}_\text{inst} at the midpoint (225∘225^\circ).

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating any Δ\Delta, write out the subtraction sign explicitly before substituting components.

  • Sketch the vectors tip-to-tail as v⃗2+(−v⃗1)\vec{v}_2 + (-\vec{v}_1) to visually verify the quadrant of Δv⃗\Delta\vec{v}.

Lock it in

Similar question

01

A runner travels east at a constant speed of 6.0 m/s6.0\text{ m/s} and then makes a smooth 180∘180^\circ U-turn to travel west at 6.0 m/s6.0\text{ m/s}. Find: (a) the change in speed Δv=vf−vi\Delta v = v_f - v_i, and (b) the change in velocity vector Δv⃗=v⃗f−v⃗i\Delta\vec{v} = \vec{v}_f - \vec{v}_i assuming east is +x+x.

Answer

(a) Δv=6.0−6.0=0 m/s\Delta v = 6.0 - 6.0 = 0\text{ m/s}; (b) v⃗i=6.0ı^ m/s\vec{v}_i = 6.0\hat{\imath}\text{ m/s} and v⃗f=−6.0ı^ m/s\vec{v}_f = -6.0\hat{\imath}\text{ m/s}, so Δv⃗=(−6.0ı^)−(6.0ı^)=−12.0ı^ m/s\Delta\vec{v} = (-6.0\hat{\imath}) - (6.0\hat{\imath}) = -12.0\hat{\imath}\text{ m/s} (magnitude 12.0 m/s12.0\text{ m/s}, pointing west).

02

An aircraft flies horizontally at a constant speed of 200 m/s200\text{ m/s} heading due north. Over 20 seconds20\text{ seconds}, it executes a steady turn until it heads due east at the same speed. (a) Determine the magnitude and direction of the average acceleration vector a⃗avg\vec{a}_{\text{avg}}.

Answer

v⃗1=200ȷ^ m/s\vec{v}_1 = 200\hat{\jmath}\text{ m/s}, v⃗2=200ı^ m/s\vec{v}_2 = 200\hat{\imath}\text{ m/s}. Δv⃗=200ı^−200ȷ^ m/s\Delta\vec{v} = 200\hat{\imath} - 200\hat{\jmath}\text{ m/s}, with magnitude ∣Δv⃗∣=2002+(−200)2=2002≈283 m/s|\Delta\vec{v}| = \sqrt{200^2 + (-200)^2} = 200\sqrt{2} \approx 283\text{ m/s} directed southeast (−45∘-45^\circ). Therefore, a⃗avg=Δv⃗Δt=200220≈14.1 m/s2\vec{a}_{\text{avg}} = \frac{\Delta\vec{v}}{\Delta t} = \frac{200\sqrt{2}}{20} \approx 14.1\text{ m/s}^2 directed southeast.

03

A satellite moves in a circular orbit with constant orbital speed v0v_0. Between two points on the orbit separated by an angular displacement of Δθ=60∘\Delta\theta = 60^\circ, calculate the magnitude of the velocity change ∣Δv⃗∣|\Delta\vec{v}| in terms of v0v_0.

Answer

Using the vector subtraction formula ∣Δv⃗∣=v12+v22−2v1v2cos⁡(Δθ)|\Delta\vec{v}| = \sqrt{v_1^2 + v_2^2 - 2v_1 v_2\cos(\Delta\theta)} with v1=v2=v0v_1 = v_2 = v_0: ∣Δv⃗∣=v02+v02−2v02cos⁡(60∘)=2v02−2v02(0.5)=v02=v0|\Delta\vec{v}| = \sqrt{v_0^2 + v_0^2 - 2v_0^2\cos(60^\circ)} = \sqrt{2v_0^2 - 2v_0^2(0.5)} = \sqrt{v_0^2} = v_0.

Loading workspace…