Resources

A chemical process tank in a pharmaceutical lab contains a solvent mixture with a specific gravity of SG=0.880\text{SG} = 0.880. A pressure sensor installed at a depth of d=275 cmd = 275\text{ cm} reads the pressure. The barometric pressure in the laboratory is recorded as 752 mmHg752\text{ mmHg}, and standard gravity is g=9.807 m/s2g = 9.807\text{ m/s}^2. Given that the density of pure water at reference temperature is ρwater=1.000×103 kg/m3\rho_{\text{water}} = 1.000 \times 10^3\text{ kg/m}^3 and 1.00 mmHg=133.32 Pa1.00\text{ mmHg} = 133.32\text{ Pa}, calculate the total absolute pressure at the sensor in kilopascals (kPa\text{kPa}).

Answer and steps

Final answer

124 kPa124\text{ kPa}

Steps

01

Convert all given quantities to SI units

To find the total absolute pressure at the sensor, we calculate the sum of the atmospheric pressure acting on the open surface of the liquid and the hydrostatic gauge pressure exerted by the column of solvent above the sensor: P=Patm+Pgauge=Patm+ρgdP = P_{\text{atm}} + P_{\text{gauge}} = P_{\text{atm}} + \rho g d

  1. Density of the solvent (ρ\rho): Using the definition of specific gravity (SG\text{SG}): ρ=SG⋅ρwater=0.880⋅1.000×103 kg/m3=880 kg/m3\rho = \text{SG} \cdot \rho_{\text{water}} = 0.880 \cdot 1.000 \times 10^3\text{ kg/m}^3 = 880\text{ kg/m}^3
  2. Depth (dd): d=275 cm=2.75 md = 275\text{ cm} = 2.75\text{ m}
  3. Atmospheric pressure (PatmP_{\text{atm}}): Using the given conversion factor 1.00 mmHg=133.32 Pa1.00\text{ mmHg} = 133.32\text{ Pa}: Patm=752 mmHg⋅133.32 Pa/mmHg=100 256.64 PaP_{\text{atm}} = 752\text{ mmHg} \cdot 133.32\text{ Pa/mmHg} = 100\,256.64\text{ Pa}
02

Calculate the hydrostatic gauge pressure (PgaugeP_{\text{gauge}})

The pressure exerted by the liquid column of depth dd is: Pgauge=ρ⋅g⋅dP_{\text{gauge}} = \rho \cdot g \cdot d Pgauge=(880 kg/m3)(9.807 m/s2)(2.75 m)=23 732.94 PaP_{\text{gauge}} = (880\text{ kg/m}^3)(9.807\text{ m/s}^2)(2.75\text{ m}) = 23\,732.94\text{ Pa}

03

Calculate the total absolute pressure (PP)

Add the atmospheric pressure to the hydrostatic pressure: P=Patm+PgaugeP = P_{\text{atm}} + P_{\text{gauge}} P=100 256.64 Pa+23 732.94 Pa=123 989.58 PaP = 100\,256.64\text{ Pa} + 23\,732.94\text{ Pa} = 123\,989.58\text{ Pa}

Convert the result into kilopascals (kPa\text{kPa}) and round to three significant figures: P=123 989.58 Pa1000 Pa/kPa≈124 kPaP = \frac{123\,989.58\text{ Pa}}{1000\text{ Pa/kPa}} \approx 124\text{ kPa}

Common Pitfall: Do not forget to include the atmospheric pressure at the surface. Finding only ρgd\rho g d yields the gauge pressure rather than the absolute pressure.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates only the gauge pressure, forgetting to add atmospheric pressure to obtain the total absolute pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ρ=0.880×1000 kg/m3=880 kg/m3  ⟹  d=275 cm=2.75 m\rho = 0.880 \times 1000\text{ kg/m}^3 = 880\text{ kg/m}^3 \implies d = 275\text{ cm} = 2.75\text{ m}

  2. Step 2

    P=ρ⋅g⋅d=880×9.807×2.75P = \rho \cdot g \cdot d = 880 \times 9.807 \times 2.75

    Correct

    P=Patm+ρgd=(752×133.32 Pa)+(880 kg/m3)(9.807 m/s2)(2.75 m)P = P_{\text{atm}} + \rho g d = (752 \times 133.32\text{ Pa}) + (880\text{ kg/m}^3)(9.807\text{ m/s}^2)(2.75\text{ m})

    You used the formula for hydrostatic gauge pressure instead of total absolute pressure, omitting the atmospheric pressure (PatmP_{\text{atm}}) acting on the open surface of the fluid.

  3. Step 3

    P=23732.9 Pa=23.73 kPaP = 23732.9\text{ Pa} = 23.73\text{ kPa}

    Correct

    P=100 256.64 Pa+23 732.94 Pa≈124 kPaP = 100\,256.64\text{ Pa} + 23\,732.94\text{ Pa} \approx 124\text{ kPa}

    Your numerical evaluation of ρgd\rho g d was accurate, but the final value reflects only the gauge pressure because the atmospheric term was missing from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the specific gravity to find the fluid density in kg/m3\text{kg/m}^3.

You converted the liquid depth from centimeters to meters properly.

You accurately calculated the hydrostatic pressure contribution ρgd\rho g d.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of atmospheric pressure in absolute pressure calculation

You solved for the gauge pressure (Pgauge=ρgdP_{\text{gauge}} = \rho g d) instead of the requested total absolute pressure (Pabs=Patm+PgaugeP_{\text{abs}} = P_{\text{atm}} + P_{\text{gauge}}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing gauge pressure with absolute pressure in open fluid systems where atmospheric pressure acts on the surface.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish absolute vs. gauge pressure
  • Pabs=Patm+PgaugeP_{\text{abs}} = P_{\text{atm}} + P_{\text{gauge}}

  • Check whether the problem asks for gauge pressure (pressure relative to the atmosphere) or absolute/total pressure (which must include PatmP_{\text{atm}}).

Convert barometric pressure to standard units
  • Patm=hHg×(133.32 Pa/mmHg)P_{\text{atm}} = h_{\text{Hg}} \times (133.32\text{ Pa/mmHg})

  • Convert the barometric reading to pascals before adding it to ρgd\rho g d.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the barometric pressure to pascals: Patm=752 mmHg×133.32 Pa/mmHg=100 256.64 PaP_{\text{atm}} = 752\text{ mmHg} \times 133.32\text{ Pa/mmHg} = 100\,256.64\text{ Pa}.

  2. Add the surface atmospheric pressure to the hydrostatic gauge pressure: Ptotal=Patm+Pgauge=100 256.64 Pa+23 732.94 Pa=123 989.58 PaP_{\text{total}} = P_{\text{atm}} + P_{\text{gauge}} = 100\,256.64\text{ Pa} + 23\,732.94\text{ Pa} = 123\,989.58\text{ Pa}.

  3. Convert the total absolute pressure to kilopascals and round to three significant figures: P=123 989.58 Pa1000 Pa/kPa≈124 kPaP = \frac{123\,989.58\text{ Pa}}{1000\text{ Pa/kPa}} \approx 124\text{ kPa}.

Final answer

124 kPa124\text{ kPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always identify whether the question specifies 'gauge pressure' or 'total / absolute pressure'.

  • When finding absolute pressure in an open container, write the full expression P=P0+ρghP = P_0 + \rho g h before plugging in numerical values.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert the depth from centimeters to meters, resulting in a hydrostatic pressure that is 100 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ρ=0.880×1000 kg/m3=880 kg/m3\rho = 0.880 \times 1000\text{ kg/m}^3 = 880\text{ kg/m}^3

  2. Step 2

    Patm=752×133.32 Pa=100256.64 Pa=100.26 kPaP_{\text{atm}} = 752 \times 133.32\text{ Pa} = 100256.64\text{ Pa} = 100.26\text{ kPa}

  3. Step 3

    Pgauge=ρ⋅g⋅d=880×9.807×275=2373294 Pa=2373.29 kPaP_{\text{gauge}} = \rho \cdot g \cdot d = 880 \times 9.807 \times 275 = 2373294\text{ Pa} = 2373.29\text{ kPa}

    Correct

    Pgauge=ρgd=(880 kg/m3)(9.807 m/s2)(2.75 m)≈23 732.94 Pa≈23.73 kPaP_{\text{gauge}} = \rho g d = (880\text{ kg/m}^3)(9.807\text{ m/s}^2)(2.75\text{ m}) \approx 23\,732.94\text{ Pa} \approx 23.73\text{ kPa}

    You plugged in the depth as 275275 instead of converting 275 cm275\text{ cm} into SI units (2.75 m2.75\text{ m}). Because the other quantities use meters, grams/kilograms, and seconds, the depth must be expressed in meters to yield pascals.

  4. Step 4

    Ptotal=Patm+Pgauge=100.26+2373.29=2473.55 kPaP_{\text{total}} = P_{\text{atm}} + P_{\text{gauge}} = 100.26 + 2373.29 = 2473.55\text{ kPa}

    Correct

    Ptotal=Patm+Pgauge=100.26 kPa+23.73 kPa≈124 kPaP_{\text{total}} = P_{\text{atm}} + P_{\text{gauge}} = 100.26\text{ kPa} + 23.73\text{ kPa} \approx 124\text{ kPa}

    Your addition method was conceptually correct, but the numerical answer inherits the scale error from the unconverted depth.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the specific gravity to determine the fluid density in kg/m3\text{kg/m}^3.

You accurately converted the atmospheric pressure from mmHg\text{mmHg} into pascals and kilopascals.

You correctly recognized that total absolute pressure is the sum of atmospheric pressure and hydrostatic gauge pressure.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
unit conversion omission

You entered 275275 directly for depth without dividing by 100100 to convert centimeters to meters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Failing to enforce consistent base SI units across all factors before evaluating the hydrostatic formula ρgd\rho g d.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency Check
  • In the hydrostatic pressure equation P=ρgdP = \rho g d, pressure is obtained in Pa\text{Pa} (N/m2\text{N/m}^2) only when ρ\rho is in kg/m3\text{kg/m}^3, gg is in m/s2\text{m/s}^2, and dd is in m\text{m}.

  • Always list and convert linear dimensions to meters (m\text{m}) before substituting them into SI formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the depth to meters: d=275 cm=2.75 md = 275\text{ cm} = 2.75\text{ m}.

  2. Calculate the hydrostatic gauge pressure: Pgauge=(880 kg/m3)(9.807 m/s2)(2.75 m)=23 732.94 Pa≈23.733 kPaP_{\text{gauge}} = (880\text{ kg/m}^3)(9.807\text{ m/s}^2)(2.75\text{ m}) = 23\,732.94\text{ Pa} \approx 23.733\text{ kPa}.

  3. Add the atmospheric pressure: Ptotal=100.257 kPa+23.733 kPa=123.99 kPaP_{\text{total}} = 100.257\text{ kPa} + 23.733\text{ kPa} = 123.99\text{ kPa}.

  4. Round to three significant figures: 124 kPa124\text{ kPa}.

Final answer

124 kPa124\text{ kPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before multiplying numbers in physical equations, write out their explicit units to confirm dimensional consistency.

  • Practice spotting centimeter-to-meter conversions when calculating pressure, work, and energy quantities.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to multiply by specific gravity, mistakenly using the density of pure water for the hydrostatic pressure calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    d=275 cm=2.75 m  ⟹  Patm=752×133.32=100256.64 Pa=100.26 kPad = 275\text{ cm} = 2.75\text{ m} \implies P_{\text{atm}} = 752 \times 133.32 = 100256.64\text{ Pa} = 100.26\text{ kPa}

  2. Step 2

    Pgauge=1000×9.807×2.75=26969.25 Pa=26.97 kPaP_{\text{gauge}} = 1000 \times 9.807 \times 2.75 = 26969.25\text{ Pa} = 26.97\text{ kPa}

    Correct

    ρ=SG⋅ρwater=0.880×1000 kg/m3=880 kg/m3  ⟹  Pgauge=880×9.807×2.75≈23 732.94 Pa≈23.73 kPa\rho = \text{SG} \cdot \rho_{\text{water}} = 0.880 \times 1000\text{ kg/m}^3 = 880\text{ kg/m}^3 \implies P_{\text{gauge}} = 880 \times 9.807 \times 2.75 \approx 23\,732.94\text{ Pa} \approx 23.73\text{ kPa}

    You substituted the density of pure water (1000 kg/m31000\text{ kg/m}^3) into ρgd\rho g d rather than adjusting for the specific gravity of the solvent (ρ=0.880×1000 kg/m3=880 kg/m3\rho = 0.880 \times 1000\text{ kg/m}^3 = 880\text{ kg/m}^3).

  3. Step 3

    Ptotal=100.26+26.97=127.23 kPaP_{\text{total}} = 100.26 + 26.97 = 127.23\text{ kPa}

    Correct

    Ptotal=Patm+Pgauge=100.26 kPa+23.73 kPa≈124 kPaP_{\text{total}} = P_{\text{atm}} + P_{\text{gauge}} = 100.26\text{ kPa} + 23.73\text{ kPa} \approx 124\text{ kPa}

    You correctly applied the formula for absolute pressure by adding PatmP_{\text{atm}} and PgaugeP_{\text{gauge}}, but the result was affected by the incorrect density in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted depth to meters and barometric reading to pascals.

You correctly recognized that total absolute pressure is the sum of atmospheric pressure and hydrostatic gauge pressure.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of specific gravity conversion

You used ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3 directly instead of multiplying by SG=0.880\text{SG} = 0.880.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating fluid density with the reference density of water when given a dimensionless specific gravity. Specific gravity is a ratio: SG=ρfluid/ρwater\text{SG} = \rho_{\text{fluid}} / \rho_{\text{water}}, meaning the actual fluid density must be calculated as ρfluid=SG×ρwater\rho_{\text{fluid}} = \text{SG} \times \rho_{\text{water}} before finding hydrostatic pressure.

REASONING PATH
Your ACEpath teacher’s suggested approach
Specific Gravity to Density
  • ρfluid=SG⋅ρwater\rho_{\text{fluid}} = \text{SG} \cdot \rho_{\text{water}}

  • Always verify whether the problem gives absolute fluid density or specific gravity before substituting into P=ρgdP = \rho g d.

Total vs. Gauge Pressure
  • Pabs=Patm+ρgdP_{\text{abs}} = P_{\text{atm}} + \rho g d

  • Add surface atmospheric pressure whenever finding absolute pressure in an open or vented container.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ρsolvent=SG⋅ρwater=0.880×1000 kg/m3=880 kg/m3\rho_{\text{solvent}} = \text{SG} \cdot \rho_{\text{water}} = 0.880 \times 1000\text{ kg/m}^3 = 880\text{ kg/m}^3

  2. Pgauge=ρsolventgd=(880 kg/m3)(9.807 m/s2)(2.75 m)=23 732.94 Pa≈23.73 kPaP_{\text{gauge}} = \rho_{\text{solvent}} g d = (880\text{ kg/m}^3)(9.807\text{ m/s}^2)(2.75\text{ m}) = 23\,732.94\text{ Pa} \approx 23.73\text{ kPa}

  3. Ptotal=Patm+Pgauge=100.26 kPa+23.73 kPa=123.99 kPa≈124 kPaP_{\text{total}} = P_{\text{atm}} + P_{\text{gauge}} = 100.26\text{ kPa} + 23.73\text{ kPa} = 123.99\text{ kPa} \approx 124\text{ kPa}

Final answer

124 kPa124\text{ kPa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before calculating hydrostatic pressure, highlight the fluid's identity and write out its density explicitly as ρ=SG⋅ρwater\rho = \text{SG} \cdot \rho_{\text{water}}.

  • Round your final answer to three significant figures to match the given data.

Lock it in

Similar question

01

An open storage pool contains fresh water (ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3). If atmospheric pressure is 101.3 kPa101.3\text{ kPa} and g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the total absolute pressure at a depth of 4.50 m4.50\text{ m} in kPa\text{kPa}.

Answer

145 kPa145\text{ kPa}. Hydrostatic pressure is Pgauge=ρgh=(1000)(9.80)(4.50)=44 100 Pa=44.1 kPaP_{\text{gauge}} = \rho g h = (1000)(9.80)(4.50) = 44\,100\text{ Pa} = 44.1\text{ kPa}. Total absolute pressure is P=Patm+Pgauge=101.3 kPa+44.1 kPa=145.4 kPa≈145 kPaP = P_{\text{atm}} + P_{\text{gauge}} = 101.3\text{ kPa} + 44.1\text{ kPa} = 145.4\text{ kPa} \approx 145\text{ kPa}.

02

A cylindrical tank open to the atmosphere contains an oil with specific gravity SG=0.850\text{SG} = 0.850. A diver measures the total absolute pressure at the bottom to be 135.0 kPa135.0\text{ kPa}. The ambient barometric pressure is 740 mmHg740\text{ mmHg} (1.00 mmHg=133.32 Pa1.00\text{ mmHg} = 133.32\text{ Pa}). Taking g=9.81 m/s2g = 9.81\text{ m/s}^2 and ρwater=1000 kg/m3\rho_{\text{water}} = 1000\text{ kg/m}^3, determine the depth of the oil in meters.

Answer

4.36 m4.36\text{ m}. Atmospheric pressure: Patm=740×133.32=98 657 Pa=98.66 kPaP_{\text{atm}} = 740 \times 133.32 = 98\,657\text{ Pa} = 98.66\text{ kPa}. Gauge pressure: Pgauge=Pabs−Patm=135.0−98.66=36.34 kPa=36 343 PaP_{\text{gauge}} = P_{\text{abs}} - P_{\text{atm}} = 135.0 - 98.66 = 36.34\text{ kPa} = 36\,343\text{ Pa}. Density: ρ=850 kg/m3\rho = 850\text{ kg/m}^3. Depth: h=Pgaugeρg=36 343(850)(9.81)≈4.36 mh = \frac{P_{\text{gauge}}}{\rho g} = \frac{36\,343}{(850)(9.81)} \approx 4.36\text{ m}.

03

A U-tube manometer open to atmosphere (Patm=100.0 kPaP_{\text{atm}} = 100.0\text{ kPa}) is connected to a pressurized gas cylinder. The manometer fluid is mercury (ρ=13 600 kg/m3\rho = 13\,600\text{ kg/m}^3). If the open arm's liquid level is 18.5 cm18.5\text{ cm} higher than the arm connected to the gas cylinder, find both the gauge pressure and absolute pressure of the gas inside the cylinder in kPa\text{kPa} (g=9.81 m/s2g = 9.81\text{ m/s}^2).

Answer

Pgauge=24.7 kPaP_{\text{gauge}} = 24.7\text{ kPa}, Pabs=124.7 kPaP_{\text{abs}} = 124.7\text{ kPa}. The height difference gives gauge pressure: Pgauge=ρgh=(13 600 kg/m3)(9.81 m/s2)(0.185 m)=24 682 Pa≈24.7 kPaP_{\text{gauge}} = \rho g h = (13\,600\text{ kg/m}^3)(9.81\text{ m/s}^2)(0.185\text{ m}) = 24\,682\text{ Pa} \approx 24.7\text{ kPa}. Absolute pressure is Pabs=Patm+Pgauge=100.0 kPa+24.7 kPa=124.7 kPaP_{\text{abs}} = P_{\text{atm}} + P_{\text{gauge}} = 100.0\text{ kPa} + 24.7\text{ kPa} = 124.7\text{ kPa}.

Loading workspace…