Resources

A ray of light traveling in air (n1=1.00n_1 = 1.00) is incident upon the flat surface of a clear polycarbonate block (n2=1.58n_2 = 1.58). Upon entering the block, the ray is refracted such that it undergoes an angular deviation of δ=16.0∘\delta = 16.0^\circ from its original propagation trajectory towards the normal. Determine the angle of incidence θ1\theta_1 of the light ray at the air-polycarbonate interface.

Answer and steps

Final answer

θ1=48.7∘\theta_1 = 48.7^\circ

Steps

01

Relate Refraction and Angular Deviation

When a light ray passes from air (n1=1.00n_1 = 1.00) into a denser optical medium such as polycarbonate (n2=1.58n_2 = 1.58), it bends toward the normal line perpendicular to the interface.

According to Snell's Law: n1sin⁡θ1=n2sin⁡θ2n_1 \sin\theta_1 = n_2 \sin\theta_2

Expressing the sine of the angle of refraction sin⁡θ2\sin\theta_2 in terms of the angle of incidence θ1\theta_1: sin⁡θ2=n1n2sin⁡θ1\sin\theta_2 = \frac{n_1}{n_2}\sin\theta_1

The difference in the trajectory's sine component across the interface is governed by the angular deviation δ=16.0∘\delta = 16.0^\circ: sin⁡θ1−sin⁡θ2=sin⁡δ\sin\theta_1 - \sin\theta_2 = \sin\delta

02

Set Up the Equation for θ1\theta_1

Substitute the expression for sin⁡θ2\sin\theta_2 into the deviation relationship: sin⁡θ1−n1n2sin⁡θ1=sin⁡δ\sin\theta_1 - \frac{n_1}{n_2}\sin\theta_1 = \sin\delta

Factor out sin⁡θ1\sin\theta_1: (n2−n1n2)sin⁡θ1=sin⁡δ\left(\frac{n_2 - n_1}{n_2}\right)\sin\theta_1 = \sin\delta

Rearranging to isolate sin⁡θ1\sin\theta_1: sin⁡θ1=(n2n2−n1)sin⁡δ\sin\theta_1 = \left(\frac{n_2}{n_2 - n_1}\right)\sin\delta

03

Calculate the Angle of Incidence

Substitute the known values (n1=1.00n_1 = 1.00, n2=1.58n_2 = 1.58, and δ=16.0∘\delta = 16.0^\circ): sin⁡θ1=(1.581.58−1.00)sin⁡(16.0∘)\sin\theta_1 = \left(\frac{1.58}{1.58 - 1.00}\right)\sin(16.0^\circ) sin⁡θ1=1.580.58⋅0.27564≈2.7241⋅0.27564≈0.7509\sin\theta_1 = \frac{1.58}{0.58} \cdot 0.27564 \approx 2.7241 \cdot 0.27564 \approx 0.7509

Taking the inverse sine: θ1=arcsin⁡(0.7509)≈48.7∘\theta_1 = \arcsin(0.7509) \approx 48.7^\circ

Pitfall to Avoid

Be careful not to confuse the angle of refraction θ2\theta_2 with the angular deviation δ\delta. The angle of refraction is measured relative to the normal line, whereas the deviation angle δ\delta is measured relative to the straight-line continuation of the incident ray's original path.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the angular deviation with the angle of refraction, directly setting θ₂ = 16.0°.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n1sin⁡(θ1)=n2sin⁡(θ2)n_1 \sin(\theta_1) = n_2 \sin(\theta_2)

  2. Step 2

    θ2=16.0∘\theta_2 = 16.0^\circ

    Correct

    sin⁡θ1−sin⁡θ2=sin⁡δ=sin⁡(16.0∘)\sin\theta_1 - \sin\theta_2 = \sin\delta = \sin(16.0^\circ)

    You directly set the angle of refraction θ2\theta_2 equal to the angular deviation δ=16.0∘\delta = 16.0^\circ. The angle of refraction θ2\theta_2 is measured from the normal line, whereas the deviation δ\delta represents the angular deflection of the ray from its incident trajectory.

  3. Step 3

    1.00⋅sin⁡(θ1)=1.58⋅sin⁡(16.0∘)  ⟹  sin⁡(θ1)=1.58⋅0.2756=0.4355  ⟹  θ1=arcsin⁡(0.4355)=25.8∘1.00 \cdot \sin(\theta_1) = 1.58 \cdot \sin(16.0^\circ) \implies \sin(\theta_1) = 1.58 \cdot 0.2756 = 0.4355 \implies \theta_1 = \arcsin(0.4355) = 25.8^\circ

    Correct

    sin⁡θ1=(n2n2−n1)sin⁡δ=(1.580.58)sin⁡(16.0∘)≈0.7509  ⟹  θ1=arcsin⁡(0.7509)≈48.7∘\sin\theta_1 = \left(\frac{n_2}{n_2 - n_1}\right)\sin\delta = \left(\frac{1.58}{0.58}\right)\sin(16.0^\circ) \approx 0.7509 \implies \theta_1 = \arcsin(0.7509) \approx 48.7^\circ

    Your algebra and trigonometric evaluation followed correctly from your value of θ2\theta_2, but the result was affected by the initial substitution error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and wrote Snell's Law for refraction across a flat boundary.

You substituted the refractive indices and evaluated the trigonometric functions accurately based on your assumed angle.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Angle Definition Confusion

You equated the angular deviation δ\delta directly to the angle of refraction θ2\theta_2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the angle of deviation (the deflection angle between the original path and the refracted path) with the angle of refraction (the angle between the refracted ray and the normal line).

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Ray Angles from the Normal
  • The angle of refraction θ2\theta_2 is always measured relative to the normal line perpendicular to the interface.

  • Always sketch the normal line and mark θ1\theta_1 and θ2\theta_2 from the normal, noting that deviation δ\delta is the angle between the unbent straight path and the refracted ray.

Connect Deviation to Refraction
  • When a ray bends toward the normal, deviation relates the difference in trajectory across media: sin⁡θ1−sin⁡θ2=sin⁡δ\sin\theta_1 - \sin\theta_2 = \sin\delta.

  • Express sin⁡θ2\sin\theta_2 in terms of sin⁡θ1\sin\theta_1 via Snell's Law first, then substitute into the deviation relation to isolate θ1\theta_1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. From Snell's Law, express sin⁡θ2\sin\theta_2 in terms of θ1\theta_1: sin⁡θ2=n1n2sin⁡θ1\sin\theta_2 = \frac{n_1}{n_2}\sin\theta_1.

  2. Apply the deviation condition: sin⁡θ1−sin⁡θ2=sin⁡δ\sin\theta_1 - \sin\theta_2 = \sin\delta.

  3. Substitute sin⁡θ2\sin\theta_2: sin⁡θ1−n1n2sin⁡θ1=sin⁡(16.0∘)  ⟹  (n2−n1n2)sin⁡θ1=sin⁡(16.0∘)\sin\theta_1 - \frac{n_1}{n_2}\sin\theta_1 = \sin(16.0^\circ) \implies \left(\frac{n_2 - n_1}{n_2}\right)\sin\theta_1 = \sin(16.0^\circ).

  4. Solve for sin⁡θ1\sin\theta_1: sin⁡θ1=(1.581.58−1.00)sin⁡(16.0∘)≈2.7241×0.27564≈0.7509\sin\theta_1 = \left(\frac{1.58}{1.58 - 1.00}\right)\sin(16.0^\circ) \approx 2.7241 \times 0.27564 \approx 0.7509.

  5. Compute the inverse sine: θ1=arcsin⁡(0.7509)≈48.7∘\theta_1 = \arcsin(0.7509) \approx 48.7^\circ.

Final answer

θ1=48.7∘\theta_1 = 48.7^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a clear ray diagram showing the interface, normal line, incident ray, refracted ray, and dashed straight-through ray before writing formulas.

  • Label θ1\theta_1 and θ2\theta_2 directly adjacent to the normal, and label the deviation δ\delta between the dashed continuation and the refracted ray.

  • Practice using the deviation relation combined with Snell's Law to solve for unknown boundary angles.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly assumes deviation adds to the angle of incidence instead of subtracting, writing θ₂ = θ₁ + 16.0°.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    θ2=θ1−16.0∘\theta_2 = \theta_1 - 16.0^\circ (crossed out) ⟹θ2=θ1+16.0∘\Longrightarrow \theta_2 = \theta_1 + 16.0^\circ

    Correct

    θ2=θ1−16.0∘\theta_2 = \theta_1 - 16.0^\circ

    You originally had the correct relation, but crossed it out. Because the ray travels from air into a denser medium (n2=1.58>n1=1.00n_2 = 1.58 > n_1 = 1.00), the refracted ray bends toward the normal line, which means the angle of refraction must be smaller than the angle of incidence: θ2=θ1−δ\theta_2 = \theta_1 - \delta.

  2. Step 2

    sin⁡(θ1)=1.58⋅sin⁡(θ1+16.0∘)⟹sin⁡(θ1)=1.58⋅(sin⁡(θ1)cos⁡(16.0∘)+cos⁡(θ1)sin⁡(16.0∘))⟹sin⁡(θ1)=1.5188sin⁡(θ1)+0.4355cos⁡(θ1)\sin(\theta_1) = 1.58 \cdot \sin(\theta_1 + 16.0^\circ) \Longrightarrow \sin(\theta_1) = 1.58 \cdot (\sin(\theta_1)\cos(16.0^\circ) + \cos(\theta_1)\sin(16.0^\circ)) \Longrightarrow \sin(\theta_1) = 1.5188\sin(\theta_1) + 0.4355\cos(\theta_1)

    Correct

    sin⁡(θ1)=1.58⋅sin⁡(θ1−16.0∘)⟹sin⁡(θ1)=1.5188sin⁡(θ1)−0.4355cos⁡(θ1)\sin(\theta_1) = 1.58 \cdot \sin(\theta_1 - 16.0^\circ) \Longrightarrow \sin(\theta_1) = 1.5188\sin(\theta_1) - 0.4355\cos(\theta_1)

    You correctly applied Snell's law and expanded the sine of a sum using the addition formula, but the expression carries forward the sign error from Step 1.

  3. Step 3

    −0.5188sin⁡(θ1)=0.4355cos⁡(θ1)⟹tan⁡(θ1)=−0.8394-0.5188\sin(\theta_1) = 0.4355\cos(\theta_1) \Longrightarrow \tan(\theta_1) = -0.8394

    Correct

    0.5188sin⁡(θ1)=0.4355cos⁡(θ1)⟹tan⁡(θ1)=0.83940.5188\sin(\theta_1) = 0.4355\cos(\theta_1) \Longrightarrow \tan(\theta_1) = 0.8394

    Your algebraic rearrangement to isolate tan⁡(θ1)\tan(\theta_1) was executed properly, but the resulting negative value stems directly from the sign error in Step 1.

  4. Step 4

    θ1=140.0∘\theta_1 = 140.0^\circ

    Correct

    θ1=arctan⁡(0.8394)≈40.0∘\theta_1 = \arctan(0.8394) \approx 40.0^\circ

    Your final calculation reflects the prior sign error. Notice also that an angle of incidence at a flat interface must be acute (0∘≤θ1<90∘0^\circ \le \theta_1 < 90^\circ), so an obtuse angle indicates an earlier sign inconsistency.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and set up Snell's law with the given refractive indices.

You skillfully used the sine angle-addition identity to convert a non-linear trigonometric equation into a simple linear relation for tan⁡(θ1)\tan(\theta_1).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Deviation Sign Misconception

You initially wrote the correct relation θ2=θ1−16.0∘\theta_2 = \theta_1 - 16.0^\circ, but second-guessed yourself and crossed it out.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of bending when moving into an optically denser medium. Entering a medium with a higher refractive index causes the ray to bend toward the normal, reducing the angle relative to the normal (θ2<θ1\theta_2 < \theta_1).

REASONING PATH
Your ACEpath teacher’s suggested approach
Bending Direction Check
  • When n2>n1n_2 > n_1, light slows down and bends toward the normal line, so θ2<θ1\theta_2 < \theta_1.

  • Always sketch the straight-line continuation of the incident ray to visually confirm whether deviation δ\delta reduces or increases the angle from the normal.

Physical Domain Check
  • Angles of incidence and refraction are measured relative to the normal and must lie in the range [0∘,90∘)[0^\circ, 90^\circ).](streamdown:incomplete-link)

  • If your trigonometric solution yields an obtuse angle or a negative tangent, check your sign conventions in the angle relations.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Because the ray enters an optically denser medium (n2>n1n_2 > n_1), it bends toward the normal: θ2=θ1−16.0∘\theta_2 = \theta_1 - 16.0^\circ.

  2. Substitute this into Snell's law: 1.00sin⁡(θ1)=1.58sin⁡(θ1−16.0∘)1.00\sin(\theta_1) = 1.58\sin(\theta_1 - 16.0^\circ).

  3. Expand using the angle-difference identity: sin⁡(θ1)=1.58(sin⁡(θ1)cos⁡(16.0∘)−cos⁡(θ1)sin⁡(16.0∘))=1.5188sin⁡(θ1)−0.4355cos⁡(θ1)\sin(\theta_1) = 1.58(\sin(\theta_1)\cos(16.0^\circ) - \cos(\theta_1)\sin(16.0^\circ)) = 1.5188\sin(\theta_1) - 0.4355\cos(\theta_1).

  4. Group terms: 0.4355cos⁡(θ1)=0.5188sin⁡(θ1)⟹tan⁡(θ1)=0.43550.5188≈0.83940.4355\cos(\theta_1) = 0.5188\sin(\theta_1) \Longrightarrow \tan(\theta_1) = \frac{0.4355}{0.5188} \approx 0.8394.

Final answer

θ1=arctan⁡(0.8394)≈40.0∘\theta_1 = \arctan(0.8394) \approx 40.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a quick ray diagram before writing equations to verify whether deviation is added or subtracted.

  • Practice solving combined Snell's law and deviation problems without relying on quadrant-II angles.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the refractive indices in Snell's law, applying n₂ sin(θ₁) = n₁ sin(θ₂).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    θ2=θ1−16.0∘\theta_2 = \theta_1 - 16.0^\circ

  2. Step 2

    1.58⋅sin⁡(θ1)=1.00⋅sin⁡(θ1−16.0∘)1.58 \cdot \sin(\theta_1) = 1.00 \cdot \sin(\theta_1 - 16.0^\circ)

    Correct

    1.00⋅sin⁡(θ1)=1.58⋅sin⁡(θ1−16.0∘)1.00 \cdot \sin(\theta_1) = 1.58 \cdot \sin(\theta_1 - 16.0^\circ)

    You swapped the refractive indices in Snell's law (n1sin⁡θ1=n2sin⁡θ2n_1 \sin\theta_1 = n_2 \sin\theta_2). The ray originates in air where n1=1.00n_1 = 1.00, so 1.001.00 must multiply sin⁡θ1\sin\theta_1, while n2=1.58n_2 = 1.58 belongs with the refracted angle θ2\theta_2.

  3. Step 3

    1.58sin⁡(θ1)=sin⁡(θ1)cos⁡(16.0∘)−cos⁡(θ1)sin⁡(16.0∘)  ⟹  1.58sin⁡(θ1)=0.9613sin⁡(θ1)−0.2756cos⁡(θ1)  ⟹  0.6187sin⁡(θ1)=−0.2756cos⁡(θ1)  ⟹  tan⁡(θ1)=−0.44551.58 \sin(\theta_1) = \sin(\theta_1)\cos(16.0^\circ) - \cos(\theta_1)\sin(16.0^\circ) \implies 1.58 \sin(\theta_1) = 0.9613 \sin(\theta_1) - 0.2756 \cos(\theta_1) \implies 0.6187 \sin(\theta_1) = -0.2756 \cos(\theta_1) \implies \tan(\theta_1) = -0.4455

    Correct

    sin⁡(θ1)=1.58[sin⁡(θ1)cos⁡(16.0∘)−cos⁡(θ1)sin⁡(16.0∘)]  ⟹  0.5188sin⁡(θ1)=0.4355cos⁡(θ1)  ⟹  tan⁡(θ1)≈0.8395\sin(\theta_1) = 1.58[\sin(\theta_1)\cos(16.0^\circ) - \cos(\theta_1)\sin(16.0^\circ)] \implies 0.5188 \sin(\theta_1) = 0.4355 \cos(\theta_1) \implies \tan(\theta_1) \approx 0.8395

    Your trigonometric expansion and algebraic manipulation were carried out correctly, but they were affected by the inverted coefficients from Step 2.

  4. Step 4

    θ1=−24.0∘\theta_1 = -24.0^\circ

    Correct

    θ1≈40.0∘\theta_1 \approx 40.0^\circ

    Because of the inverted indices in Step 2, your final angle evaluated to a negative value instead of the correct physical angle of incidence.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the geometric relationship between the incident angle, refracted angle, and angular deviation.

You correctly expanded the sine difference identity and solved for the tangent of the angle.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted refractive indices in Snell's law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You paired each medium's refractive index with the angle in the opposite medium, writing n2sin⁡θ1=n1sin⁡θ2n_2 \sin\theta_1 = n_1 \sin\theta_2 instead of maintaining matching medium pairs n1sin⁡θ1=n2sin⁡θ2n_1 \sin\theta_1 = n_2 \sin\theta_2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match index and angle by medium
  • In Snell's law, each side represents one single medium: nAsin⁡θA=nBsin⁡θBn_A \sin\theta_A = n_B \sin\theta_B.

  • Always write down the medium names beside the variables before substituting numbers (for example, air:n1,θ1\text{air}: n_1, \theta_1 and block:n2,θ2\text{block}: n_2, \theta_2).

Sanity check on sign and magnitude
  • Angles of incidence and refraction measured relative to the surface normal are positive acute angles (0∘≤θ<90∘0^\circ \le \theta < 90^\circ).

  • If your calculated angle turns out negative, immediately check if the indices or deviation direction were reversed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up Snell's law with correct matching pairs: 1.00sin⁡θ1=1.58sin⁡(θ1−16.0∘)1.00 \sin\theta_1 = 1.58 \sin(\theta_1 - 16.0^\circ)

  2. Apply the difference identity: sin⁡θ1=1.58(sin⁡θ1cos⁡16.0∘−cos⁡θ1sin⁡16.0∘)\sin\theta_1 = 1.58(\sin\theta_1 \cos 16.0^\circ - \cos\theta_1 \sin 16.0^\circ)

  3. Substitute numerical values cos⁡16.0∘≈0.9613\cos 16.0^\circ \approx 0.9613 and sin⁡16.0∘≈0.2756\sin 16.0^\circ \approx 0.2756: sin⁡θ1=1.5188sin⁡θ1−0.4355cos⁡θ1\sin\theta_1 = 1.5188 \sin\theta_1 - 0.4355 \cos\theta_1

  4. Rearrange terms: (1.5188−1.0000)sin⁡θ1=0.4355cos⁡θ1  ⟹  0.5188sin⁡θ1=0.4355cos⁡θ1(1.5188 - 1.0000)\sin\theta_1 = 0.4355 \cos\theta_1 \implies 0.5188 \sin\theta_1 = 0.4355 \cos\theta_1

  5. Divide by cos⁡θ1\cos\theta_1 and solve: tan⁡θ1=0.43550.5188≈0.8395  ⟹  θ1=arctan⁡(0.8395)≈40.0∘\tan\theta_1 = \frac{0.4355}{0.5188} \approx 0.8395 \implies \theta_1 = \arctan(0.8395) \approx 40.0^\circ

Final answer

θ1≈40.0∘\theta_1 \approx 40.0^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Snell's law pairing by clearly labeling medium 1 and medium 2 before writing the equation.

  • Practice solving refraction problems involving angular deviation δ=∣θ1−θ2∣\delta = |\theta_1 - \theta_2| using the sine subtraction formula.

Lock it in

Similar question

01

A light ray in air (n1=1.00n_1 = 1.00) enters a glass block (n2=1.50n_2 = 1.50). The angle of incidence is θ1=45.0∘\theta_1 = 45.0^\circ. Find the angle of refraction θ2\theta_2 and the angular deviation δ=θ1−θ2\delta = \theta_1 - \theta_2.

Answer

By Snell's Law, sin⁡θ2=1.001.50sin⁡(45.0∘)=23≈0.4714\sin\theta_2 = \frac{1.00}{1.50}\sin(45.0^\circ) = \frac{\sqrt{2}}{3} \approx 0.4714, so θ2≈28.1∘\theta_2 \approx 28.1^\circ. The angular deviation is δ=45.0∘−28.1∘=16.9∘\delta = 45.0^\circ - 28.1^\circ = 16.9^\circ.

02

A light ray transitions from air (n1=1.00n_1 = 1.00) into an optical plastic (n2=1.60n_2 = 1.60) and undergoes an angular deviation characterized by sin⁡θ1−sin⁡θ2=sin⁡(15.0∘)\sin\theta_1 - \sin\theta_2 = \sin(15.0^\circ). Find the angle of incidence θ1\theta_1.

Answer

Using Snell's Law, sin⁡θ2=1.001.60sin⁡θ1\sin\theta_2 = \frac{1.00}{1.60}\sin\theta_1. Substituting into the relation gives (1−11.60)sin⁡θ1=sin⁡(15.0∘)\left(1 - \frac{1}{1.60}\right)\sin\theta_1 = \sin(15.0^\circ), so 0.601.60sin⁡θ1=sin⁡(15.0∘)\frac{0.60}{1.60}\sin\theta_1 = \sin(15.0^\circ). Thus sin⁡θ1=1.600.60sin⁡(15.0∘)≈2.6667×0.2588=0.6902\sin\theta_1 = \frac{1.60}{0.60}\sin(15.0^\circ) \approx 2.6667 \times 0.2588 = 0.6902, yielding θ1=arcsin⁡(0.6902)≈43.6∘\theta_1 = \arcsin(0.6902) \approx 43.6^\circ.

03

A light ray traveling in water (n1=1.33n_1 = 1.33) enters crown glass (n2=1.52n_2 = 1.52). If the incident angle is adjusted such that sin⁡θ1−sin⁡θ2=0.0800\sin\theta_1 - \sin\theta_2 = 0.0800, determine θ1\theta_1 and verify whether the ray bends toward or away from the normal.

Answer

Since n2>n1n_2 > n_1, the ray bends toward the normal. By Snell's Law, sin⁡θ2=1.331.52sin⁡θ1\sin\theta_2 = \frac{1.33}{1.52}\sin\theta_1. Substituting into the difference gives (1−1.331.52)sin⁡θ1=0.0800  ⟹  0.191.52sin⁡θ1=0.0800  ⟹  0.125sin⁡θ1=0.0800\left(1 - \frac{1.33}{1.52}\right)\sin\theta_1 = 0.0800 \implies \frac{0.19}{1.52}\sin\theta_1 = 0.0800 \implies 0.125\sin\theta_1 = 0.0800. Therefore, sin⁡θ1=0.08000.125=0.640\sin\theta_1 = \frac{0.0800}{0.125} = 0.640, giving θ1=arcsin⁡(0.640)≈39.8∘\theta_1 = \arcsin(0.640) \approx 39.8^\circ.

Loading workspace…