Resources

A freight train of total mass m=1.20×106 kgm = 1.20 \times 10^6\text{ kg} travels along a straight, horizontal section of track at a constant velocity of v=22.0 m/sv = 22.0\text{ m/s}. The locomotive engine supplies a constant forward tractive force of Fengine=8.50×104 NF_{\text{engine}} = 8.50 \times 10^4\text{ N} to balance opposing mechanical resistance and aerodynamic drag forces. Calculate the total net work WnetW_{\text{net}} done on the train over a displacement of Δx=1.50 km\Delta x = 1.50\text{ km}, and determine the mechanical power PP delivered by the locomotive to sustain this uniform motion.

Answer and steps

Final answer

Wnet=0 JW_{\text{net}} = 0\text{ J}; P=1.87×106 WP = 1.87 \times 10^6\text{ W} (or 1.87 MW1.87\text{ MW}).

Steps

01

Identify the Motion Characteristics and Net Force

The train moves along a straight, horizontal track at a constant velocity of v=22.0 m/sv = 22.0\text{ m/s}.

Because the velocity is constant, the acceleration of the train is zero: a=0 m/s2a = 0\text{ m/s}^2

According to Newton's second law: Fnet=m⋅a=(1.20×106 kg)⋅(0 m/s2)=0 NF_{\text{net}} = m \cdot a = (1.20 \times 10^6\text{ kg}) \cdot (0\text{ m/s}^2) = 0\text{ N}

The forward tractive force supplied by the engine exactly balances the opposing resistive forces: Fresistive=−Fengine=−8.50×104 NF_{\text{resistive}} = -F_{\text{engine}} = -8.50 \times 10^4\text{ N}


02

Calculate the Total Net Work (WnetW_{\text{net}})

The net work done on an object can be determined from the net force acting over displacement Δx=1.50 km=1500 m\Delta x = 1.50\text{ km} = 1500\text{ m}: Wnet=Fnet⋅Δx=(0 N)⋅(1500 m)=0 JW_{\text{net}} = F_{\text{net}} \cdot \Delta x = (0\text{ N}) \cdot (1500\text{ m}) = 0\text{ J}

Alternatively, by the Work-Energy Theorem, the net work equals the change in kinetic energy (ΔK\Delta K): Wnet=ΔK=12mvf2−12mvi2W_{\text{net}} = \Delta K = \frac{1}{2}m v_f^2 - \frac{1}{2}m v_i^2

Since the speed is constant (vi=vf=22.0 m/sv_i = v_f = 22.0\text{ m/s}), ΔK=0\Delta K = 0, confirming: Wnet=0 JW_{\text{net}} = 0\text{ J}

Common Pitfall: Do not confuse the net work with the work done by the engine. The engine does positive work (Wengine=Fengine⋅Δx=1.275×108 JW_{\text{engine}} = F_{\text{engine}} \cdot \Delta x = 1.275 \times 10^8\text{ J}), but opposing resistive forces perform an equal amount of negative work (−1.275×108 J-1.275 \times 10^8\text{ J}), making the net work zero.


03

Calculate the Mechanical Power Delivered by the Locomotive (PP)

Power is the rate at which work is done. For a constant force acting in the direction of motion at a constant speed, mechanical power is given by: P=Fengine⋅vP = F_{\text{engine}} \cdot v

Substitute the given values: P=(8.50×104 N)⋅(22.0 m/s)=1.87×106 W=1.87 MWP = (8.50 \times 10^4\text{ N}) \cdot (22.0\text{ m/s}) = 1.87 \times 10^6\text{ W} = 1.87\text{ MW}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the net work done on the train with the positive work done specifically by the locomotive engine.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δx=1.50 km=1500 m  ⟹  Wnet=Fengine⋅Δx=(8.50×104 N)⋅(1500 m)=1.28×108 J\Delta x = 1.50\text{ km} = 1500\text{ m} \implies W_{\text{net}} = F_{\text{engine}} \cdot \Delta x = (8.50 \times 10^4\text{ N}) \cdot (1500\text{ m}) = 1.28 \times 10^8\text{ J}

    Correct

    Wnet=Fnet⋅Δx=0 N⋅1500 m=0 JW_{\text{net}} = F_{\text{net}} \cdot \Delta x = 0\text{ N} \cdot 1500\text{ m} = 0\text{ J} (or Wnet=ΔK=0 JW_{\text{net}} = \Delta K = 0\text{ J})

    You calculated the positive work performed specifically by the engine (WengineW_{\text{engine}}). Because the train moves at constant velocity, the acceleration is zero and the net force is zero (Fnet=0 NF_{\text{net}} = 0\text{ N}), which means the total net work is Wnet=0 JW_{\text{net}} = 0\text{ J}.

  2. Step 2

    P=Fengine⋅v=(8.50×104 N)⋅(22.0 m/s)=1.87×106 WP = F_{\text{engine}} \cdot v = (8.50 \times 10^4\text{ N}) \cdot (22.0\text{ m/s}) = 1.87 \times 10^6\text{ W}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the displacement from kilometers to meters.

You correctly identified and applied the formula P=F⋅vP = F \cdot v to compute the mechanical power supplied by the engine.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Net Work with Individual Force Work

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the net work done on a system (Wnet=FnetΔx=ΔKW_{\text{net}} = F_{\text{net}} \Delta x = \Delta K) with the work done by a single forward applied force (Wengine=FengineΔxW_{\text{engine}} = F_{\text{engine}} \Delta x). When an object moves at a constant speed, opposing forces perform an equal amount of negative work, causing the total net work to be zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Individual Work from Net Work
  • The work of an individual force is Wi=Fi⋅ΔxW_i = F_i \cdot \Delta x, whereas net work is Wnet=Fnet⋅Δx=∑WiW_{\text{net}} = F_{\text{net}} \cdot \Delta x = \sum W_i.

  • Check whether the question asks for the work done by a specific force or the total net work done on the object.

Apply the Work-Energy Theorem for Constant Velocity
  • Wnet=ΔK=12mvf2−12mvi2W_{\text{net}} = \Delta K = \frac{1}{2}m v_f^2 - \frac{1}{2}m v_i^2.

  • Whenever speed is constant, immediately recognize that ΔK=0\Delta K = 0, so WnetW_{\text{net}} must equal 0 J0\text{ J}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that constant velocity implies a=0 m/s2a = 0\text{ m/s}^2 and Fnet=0 NF_{\text{net}} = 0\text{ N}.

  2. Compute net work: Wnet=Fnet⋅Δx=(0 N)(1500 m)=0 JW_{\text{net}} = F_{\text{net}} \cdot \Delta x = (0\text{ N})(1500\text{ m}) = 0\text{ J} (or via ΔK=0 J\Delta K = 0\text{ J}).

Final answer

Wnet=0 JW_{\text{net}} = 0\text{ J}; P=1.87×106 WP = 1.87 \times 10^6\text{ W} (or 1.87 MW1.87\text{ MW})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying when individual forces do non-zero work while the net work on the object is zero.

  • Use the Work-Energy Theorem (Wnet=ΔKW_{\text{net}} = \Delta K) as a double-check whenever an object moves at constant speed.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies the definition of power by dividing the force by velocity rather than multiplying them.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=constantv = \text{constant}, so a=0 m/s2a = 0\text{ m/s}^2 and Fnet=0 N  ⟹  Wnet=Fnet∗Δx=0 JF_{\text{net}} = 0\text{ N} \implies W_{\text{net}} = F_{\text{net}} * \Delta x = 0\text{ J}

  2. Step 2

    P=Fenginev  ⟹  P=8.50∗104 N22.0 m/sP = \frac{F_{\text{engine}}}{v} \implies P = \frac{8.50 * 10^4\text{ N}}{22.0\text{ m/s}}

    Correct

    P=Fengine⋅v=(8.50×104 N)(22.0 m/s)P = F_{\text{engine}} \cdot v = (8.50 \times 10^4\text{ N})(22.0\text{ m/s})

    Mechanical power is the rate of doing work, P=WΔt=F⋅ΔxΔt=F⋅vP = \frac{W}{\Delta t} = \frac{F \cdot \Delta x}{\Delta t} = F \cdot v. You wrote the ratio Fv\frac{F}{v} instead of the product F⋅vF \cdot v.

  3. Step 3

    P=3.86∗103 WP = 3.86 * 10^3\text{ W}

    Correct

    P=1.87×106 WP = 1.87 \times 10^6\text{ W}

    Your arithmetic matches your written formula, but the value is incorrect due to the inverted formula in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly deduced that zero acceleration implies zero net force and zero net work on the train.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion

Dividing tractive force by velocity rather than multiplying them to compute power.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misremembering the kinematic definition of mechanical power and not checking the base units of the resulting quantity (N/(m/s)≠W\text{N}/(\text{m/s}) \neq \text{W}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Derive from Definitions
  • P=dWdt=F⃗⋅dx⃗dt=F⃗⋅v⃗P = \frac{dW}{dt} = \vec{F} \cdot \frac{d\vec{x}}{dt} = \vec{F} \cdot \vec{v}

  • When computing power from force and velocity, express work as F⋅ΔxF \cdot \Delta x and divide by Δt\Delta t to recall that vv appears in the numerator as a product.

Dimensional Analysis Verification
  • 1 W=1 J/s=1 N⋅m/s1\text{ W} = 1\text{ J/s} = 1\text{ N}\cdot\text{m/s}

  • Check that force times velocity yields N⋅(m/s)=(N⋅m)/s=J/s=W\text{N} \cdot (\text{m/s}) = (\text{N}\cdot\text{m})/\text{s} = \text{J/s} = \text{W}, whereas N/(m/s)=N⋅s/m\text{N}/(\text{m/s}) = \text{N}\cdot\text{s/m}, which is not a watt.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the relationship between constant force, speed, and power: P=Fengine⋅vP = F_{\text{engine}} \cdot v.

  2. Substitute the given values: P=(8.50×104 N)⋅(22.0 m/s)P = (8.50 \times 10^4\text{ N}) \cdot (22.0\text{ m/s}).

  3. Multiply to obtain the delivered power: P=1.87×106 W=1.87 MWP = 1.87 \times 10^6\text{ W} = 1.87\text{ MW}.

Final answer

Wnet=0 JW_{\text{net}} = 0\text{ J}; P=1.87×106 WP = 1.87 \times 10^6\text{ W} (or 1.87 MW1.87\text{ MW})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of P=F⋅vP = F \cdot v from P=ΔWΔtP = \frac{\Delta W}{\Delta t}.

  • Practice verifying mechanical formulas using dimensional analysis before calculating final values.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly substitutes the total mass of the train in place of the engine force when calculating power.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v is constant, so ΔK=0 J  ⟹  Wnet=ΔK=0 Jv\text{ is constant, so }\Delta K = 0\text{ J} \implies W_{\text{net}} = \Delta K = 0\text{ J}

  2. Step 2

    P=m∗v  ⟹  P=(1.20∗106 kg)∗(22.0 m/s)  ⟹  P=2.64∗107 WP = m * v \implies P = (1.20 * 10^6\text{ kg}) * (22.0\text{ m/s}) \implies P = 2.64 * 10^7\text{ W}

    Correct

    P=Fengine⋅v=(8.50×104 N)(22.0 m/s)=1.87×106 WP = F_{\text{engine}} \cdot v = (8.50 \times 10^4\text{ N})(22.0\text{ m/s}) = 1.87 \times 10^6\text{ W}

    You wrote P=m⋅vP = m \cdot v, which defines linear momentum pp rather than power PP. Mechanical power delivered by a force moving at constant velocity is given by P=F⋅vP = F \cdot v, so you should multiply the forward engine force FengineF_{\text{engine}} by the velocity vv.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the work-energy theorem to deduce that zero change in speed means zero net work.

You carried out the arithmetic and scientific notation multiplication accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion (Power vs. Momentum)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused mechanical power (P=F⋅vP = F \cdot v) with linear momentum (p=m⋅vp = m \cdot v), mistakenly substituting mass in place of force into the velocity rate equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check physical dimensions and units
  • Power has units of watts (W=N⋅m/s=kg⋅m2/s3\text{W} = \text{N}\cdot\text{m}/\text{s} = \text{kg}\cdot\text{m}^2/\text{s}^3), whereas m⋅vm \cdot v has units of kg⋅m/s\text{kg}\cdot\text{m}/\text{s} (momentum).

  • Verify that your formula combines a force with velocity (F⋅vF \cdot v), not a mass with velocity.

Distinguish net work from component power
  • While net force and net work are zero in uniform motion, an individual applied force still does work and delivers power at the rate P=Fapplied⋅vP = F_{\text{applied}} \cdot v.

  • Use the specific forward tractive force (FengineF_{\text{engine}}) when computing the power supplied by the engine.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the power equation for constant velocity: P=Fengine⋅vP = F_{\text{engine}} \cdot v.

  2. Substitute the engine force Fengine=8.50×104 NF_{\text{engine}} = 8.50 \times 10^4\text{ N} and speed v=22.0 m/sv = 22.0\text{ m/s}: P=(8.50×104 N)(22.0 m/s)P = (8.50 \times 10^4\text{ N})(22.0\text{ m/s}).

  3. Compute the product: P=1.87×106 W=1.87 MWP = 1.87 \times 10^6\text{ W} = 1.87\text{ MW}.

Final answer

Wnet=0 JW_{\text{net}} = 0\text{ J}; P=1.87×106 WP = 1.87 \times 10^6\text{ W} (or 1.87 MW1.87\text{ MW})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between power (P=F⋅vP = F \cdot v, measured in watts) and linear momentum (p=m⋅vp = m \cdot v, measured in kg⋅m/s\text{kg}\cdot\text{m}/\text{s}).

  • Perform dimensional analysis on your formulas before calculating numerical answers to ensure consistent units.

Lock it in

Similar question

01

A 1500 kg1500\text{ kg} automobile travels at a constant speed of 25.0 m/s25.0\text{ m/s} along a flat highway over a distance of 800 m800\text{ m}. The engine provides a tractive force of 1200 N1200\text{ N} to overcome resistive forces. (a) Find the net work WnetW_{\text{net}} done on the car. (b) Find the work done by the engine WengineW_{\text{engine}}. (c) Find the power output of the engine.

Answer

(a) Since speed is constant, a=0 m/s2  ⟹  Fnet=0 Na = 0\text{ m/s}^2 \implies F_{\text{net}} = 0\text{ N}, so Wnet=0 JW_{\text{net}} = 0\text{ J}. (b) Wengine=F⋅d=(1200 N)(800 m)=9.60×105 JW_{\text{engine}} = F \cdot d = (1200\text{ N})(800\text{ m}) = 9.60 \times 10^5\text{ J}. (c) P=F⋅v=(1200 N)(25.0 m/s)=3.00×104 W=30.0 kWP = F \cdot v = (1200\text{ N})(25.0\text{ m/s}) = 3.00 \times 10^4\text{ W} = 30.0\text{ kW}.

02

A crate of mass 50.0 kg50.0\text{ kg} is pulled along a rough horizontal floor at a constant speed of 1.50 m/s1.50\text{ m/s} by a horizontal pulling force Fpull=147 NF_{\text{pull}} = 147\text{ N} for 6.00 s6.00\text{ s}. Determine the work done by the pulling force, the work done by friction, and the total net work done on the crate.

Answer

Displacement Δx=v⋅t=(1.50 m/s)(6.00 s)=9.00 m\Delta x = v \cdot t = (1.50\text{ m/s})(6.00\text{ s}) = 9.00\text{ m}. Pulling work: Wpull=Fpull⋅Δx=(147 N)(9.00 m)=+1323 JW_{\text{pull}} = F_{\text{pull}} \cdot \Delta x = (147\text{ N})(9.00\text{ m}) = +1323\text{ J}. Since velocity is constant, fk=Fpull=147 Nf_k = F_{\text{pull}} = 147\text{ N} directed backwards, so Wfriction=−fk⋅Δx=−1323 JW_{\text{friction}} = -f_k \cdot \Delta x = -1323\text{ J}. Total net work: Wnet=Wpull+Wfriction=0 JW_{\text{net}} = W_{\text{pull}} + W_{\text{friction}} = 0\text{ J} (consistent with ΔK=0\Delta K = 0).

03

A 2.00×104 kg2.00 \times 10^4\text{ kg} cargo truck climbs a straight 5.00∘5.00^\circ incline at a steady speed of 18.0 m/s18.0\text{ m/s}. Air and rolling resistance total 3500 N3500\text{ N}. (a) Calculate the driving force required from the engine. (b) Over a distance of 500 m500\text{ m} along the incline, calculate the work done by the engine and the net work done on the truck.

Answer

(a) Opposing forces along the incline: Fopp=mgsin⁡(5.00∘)+Fresist=(2.00×104)(9.80)sin⁡(5.00∘)+3500≈17080+3500=2.06×104 NF_{\text{opp}} = mg\sin(5.00^\circ) + F_{\text{resist}} = (2.00 \times 10^4)(9.80)\sin(5.00^\circ) + 3500 \approx 17080 + 3500 = 2.06 \times 10^4\text{ N}. At constant speed, Fengine=2.06×104 NF_{\text{engine}} = 2.06 \times 10^4\text{ N}. (b) Engine work: Wengine=Fengine⋅d=(2.06×104 N)(500 m)=1.03×107 JW_{\text{engine}} = F_{\text{engine}} \cdot d = (2.06 \times 10^4\text{ N})(500\text{ m}) = 1.03 \times 10^7\text{ J}. Net work: since speed is steady, ΔK=0\Delta K = 0, so Wnet=0 JW_{\text{net}} = 0\text{ J}.

Loading workspace…