Resources

An express courier departs City P traveling in a straight line toward City Q at a uniform velocity of v=108 km/hv = 108\text{ km/h}. Express this velocity in standard SI units (m/s\text{m/s}). If the distance between the two regional centers is d=43.2 milesd = 43.2\text{ miles} (where 1 mile=1.609 km1\text{ mile} = 1.609\text{ km}), compute the total travel time in minutes, and determine the position of the courier in meters after traveling for 22.5 minutes22.5\text{ minutes}.

Answer and steps

Final answer

v=30.0 m/sv = 30.0\text{ m/s}; total travel time =38.6 min= 38.6\text{ min}; position after 22.5 min22.5\text{ min} is x=4.05×104 mx = 4.05 \times 10^4\text{ m} (or 40.5 km40.5\text{ km}).

Steps

01

Convert the Velocity to SI Units (m/s\text{m/s})

In the International System of Units (SI), distance is measured in meters (m\text{m}) and time in seconds (s\text{s}).

Using the conversion factors 1 km=1000 m1\text{ km} = 1000\text{ m} and 1 h=3600 s1\text{ h} = 3600\text{ s}: v=108 km/h=108⋅1000 m3600 s=1083.6 m/s=30.0 m/sv = 108\text{ km/h} = 108 \cdot \frac{1000\text{ m}}{3600\text{ s}} = \frac{108}{3.6}\text{ m/s} = 30.0\text{ m/s}


02

Convert Total Distance to Kilometers

The total distance between City P and City Q is given as 43.2 miles43.2\text{ miles}. Using the conversion 1 mile=1.609 km1\text{ mile} = 1.609\text{ km}: d=43.2 miles⋅1.609 km/mile=69.5088 kmd = 43.2\text{ miles} \cdot 1.609\text{ km/mile} = 69.5088\text{ km}


03

Compute the Total Travel Time in Minutes

Since the courier travels at a uniform velocity, the relationship between distance dd, speed vv, and travel time ttotalt_{\text{total}} is: ttotal=dvt_{\text{total}} = \frac{d}{v}

Substituting the distance and velocity in consistent units (km\text{km} and km/h\text{km/h}): ttotal=69.5088 km108 km/h≈0.6436 ht_{\text{total}} = \frac{69.5088\text{ km}}{108\text{ km/h}} \approx 0.6436\text{ h}

Convert hours to minutes: ttotal=0.6436 h⋅60 min/h≈38.6 mint_{\text{total}} = 0.6436\text{ h} \cdot 60\text{ min/h} \approx 38.6\text{ min}

Common Pitfall: Be careful not to divide distance in miles by speed in kilometers per hour. Always convert quantities to compatible units before calculating.


04

Determine the Position at t=22.5 minutest = 22.5\text{ minutes}

Assuming City P is at the origin (x0=0 mx_0 = 0\text{ m}):

  1. Convert the elapsed time into seconds: t=22.5 min⋅60 s/min=1350 st = 22.5\text{ min} \cdot 60\text{ s/min} = 1350\text{ s}
  2. Calculate the position using x=v⋅tx = v \cdot t: x=30.0 m/s⋅1350 s=40500 m=4.05×104 m(or 40.5 km)x = 30.0\text{ m/s} \cdot 1350\text{ s} = 40500\text{ m} = 4.05 \times 10^4\text{ m} \quad (\text{or } 40.5\text{ km})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies by 3.6 instead of dividing by 3.6 when converting km/h to m/s, yielding an incorrect velocity of 388.8 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=108×3.6=388.8 m/sv = 108 \times 3.6 = 388.8\text{ m/s}

    Correct

    v=1083.6 m/s=30.0 m/sv = \frac{108}{3.6}\text{ m/s} = 30.0\text{ m/s}

    To convert from kilometers per hour to meters per second, you must divide by 3.63.6 because 1 km=1000 m1\text{ km} = 1000\text{ m} and 1 h=3600 s1\text{ h} = 3600\text{ s}, giving 10003600=13.6\frac{1000}{3600} = \frac{1}{3.6}.

  2. Step 2

    d=43.2×1.609=69.5088 km  ⟹  t=69.5088108=0.6436 h  ⟹  t=0.6436×60=38.62 mind = 43.2 \times 1.609 = 69.5088\text{ km} \implies t = \frac{69.5088}{108} = 0.6436\text{ h} \implies t = 0.6436 \times 60 = 38.62\text{ min}

  3. Step 3

    t=22.5×60=1350 s  ⟹  x=388.8×1350=524880 mt = 22.5 \times 60 = 1350\text{ s} \implies x = 388.8 \times 1350 = 524880\text{ m}

    Correct

    t=22.5×60=1350 s  ⟹  x=30.0 m/s×1350 s=40500 m=4.05×104 mt = 22.5 \times 60 = 1350\text{ s} \implies x = 30.0\text{ m/s} \times 1350\text{ s} = 40500\text{ m} = 4.05 \times 10^4\text{ m}

    Your method of converting the elapsed time into seconds and computing x=v⋅tx = v \cdot t is completely sound, but your numerical answer is affected by the incorrect velocity value from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the distance from miles to kilometers using the given factor.

You used consistent units to find the total travel time in hours and converted it accurately into minutes.

You correctly converted 22.5 minutes22.5\text{ minutes} into seconds before multiplying by velocity to find position.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Conversion Factor

Multiplying by 3.6 instead of dividing by 3.6 during unit conversion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the conversion ratio between km/h\text{km/h} and m/s\text{m/s}. Because 1 km/h=1000 m3600 s=13.6 m/s1\text{ km/h} = \frac{1000\text{ m}}{3600\text{ s}} = \frac{1}{3.6}\text{ m/s}, moving from km/h\text{km/h} to m/s\text{m/s} requires dividing by 3.63.6, whereas multiplying by 3.63.6 converts from m/s\text{m/s} to km/h\text{km/h}. A speed value in m/s\text{m/s} should always be numerically smaller than its value in km/h\text{km/h}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reasonableness check on speed units
  • Traveling a given speed means covering fewer meters each second than kilometers each hour (1 m/s=3.6 km/h1\text{ m/s} = 3.6\text{ km/h}).

  • Ensure that your numerical value decreases when converting from km/h\text{km/h} to m/s\text{m/s}.

Dimensional analysis setup
  • v [m/s]=v [km/h]⋅1000 m1 km⋅1 h3600 sv\text{ [m/s]} = v\text{ [km/h]} \cdot \frac{1000\text{ m}}{1\text{ km}} \cdot \frac{1\text{ h}}{3600\text{ s}}.

  • Write out unit fractions explicitly so identical units cancel out on opposite sides of fraction bars.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide 108 km/h108\text{ km/h} by 3.63.6: v=1083.6=30.0 m/sv = \frac{108}{3.6} = 30.0\text{ m/s}.

  2. Substitute v=30.0 m/sv = 30.0\text{ m/s} into the position formula: x=30.0 m/s×1350 s=40500 m=4.05×104 mx = 30.0\text{ m/s} \times 1350\text{ s} = 40500\text{ m} = 4.05 \times 10^4\text{ m}.

Final answer

v=30.0 m/sv = 30.0\text{ m/s}; total travel time ≈38.6 min\approx 38.6\text{ min}; position x=4.05×104 mx = 4.05 \times 10^4\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting speeds using explicit dimensional factor labels before using the shorthand 3.63.6 shortcut.

  • Perform a sanity check on unit conversions: 388.8 m/s388.8\text{ m/s} exceeds the speed of sound, which is unrealistic for a ground courier traveling at 108 km/h108\text{ km/h}.

OverviewACEpath Teacher's Diagnosis

02 The student divides by the conversion factor 1.609 instead of multiplying when converting miles to kilometers, resulting in an incorrect distance and travel time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=1083.6=30 m/sv = \frac{108}{3.6} = 30\text{ m/s}

  2. Step 2

    d=43.21.609=26.85 kmd = \frac{43.2}{1.609} = 26.85\text{ km}

    Correct

    d=43.2 miles×1.609 km/mile≈69.51 kmd = 43.2\text{ miles} \times 1.609\text{ km/mile} \approx 69.51\text{ km}

    Because 1 mile=1.609 km1\text{ mile} = 1.609\text{ km}, a mile is longer than a kilometer, so the numerical value in kilometers must be greater than in miles. You should multiply 43.243.2 by 1.6091.609 instead of dividing.

  3. Step 3

    t=26.85108=0.2486 h  ⟹  t=0.2486×60=14.92 mint = \frac{26.85}{108} = 0.2486\text{ h} \implies t = 0.2486 \times 60 = 14.92\text{ min}

    Correct

    t=69.51 km108 km/h≈0.6436 h  ⟹  t=0.6436×60 min/h≈38.6 mint = \frac{69.51\text{ km}}{108\text{ km/h}} \approx 0.6436\text{ h} \implies t = 0.6436 \times 60\text{ min/h} \approx 38.6\text{ min}

    Your formula t=dvt = \frac{d}{v} and your conversion from hours to minutes were correct, but the result was affected by the incorrect distance value from Step 2.

  4. Step 4

    t=22.5×60=1350 s  ⟹  x=30×1350=40500 mt = 22.5 \times 60 = 1350\text{ s} \implies x = 30 \times 1350 = 40500\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You converted velocity from kilometers per hour to meters per second accurately.

You used the correct kinematic relation t=dvt = \frac{d}{v} and correctly transformed hours into minutes.

You correctly calculated the position at 22.5 minutes22.5\text{ minutes} using consistent SI units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion inversion

You inverted the conversion factor when converting miles to kilometers by dividing by 1.6091.609 instead of multiplying.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of unit cancellation when applying a conversion ratio 1 mile=1.609 km1\text{ mile} = 1.609\text{ km}. To cancel 'miles' from the numerator, the conversion factor must be arranged as 1.609 km1 mile\frac{1.609\text{ km}}{1\text{ mile}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Check
  • Write conversion factors as explicit fractions where the original unit is placed in the denominator to cancel out.

  • Set up 43.2 miles×1.609 km1 mile43.2\text{ miles} \times \frac{1.609\text{ km}}{1\text{ mile}} so the unit 'miles' cancels out algebraically.

Magnitude Reality Check
  • Converting to a smaller unit of measure must yield a larger numerical value.

  • Since 1 km1\text{ km} is shorter than 1 mile1\text{ mile}, the distance in kilometers must be numerically larger than 43.243.2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. d=43.2 miles×1.609 km/mile=69.5088 kmd = 43.2\text{ miles} \times 1.609\text{ km/mile} = 69.5088\text{ km}

  2. ttotal=69.5088 km108 km/h≈0.6436 ht_{\text{total}} = \frac{69.5088\text{ km}}{108\text{ km/h}} \approx 0.6436\text{ h}

  3. ttotal=0.6436 h×60 min/h≈38.6 mint_{\text{total}} = 0.6436\text{ h} \times 60\text{ min/h} \approx 38.6\text{ min}

Final answer

v=30.0 m/sv = 30.0\text{ m/s}, total travel time =38.6 min= 38.6\text{ min}, and position x=4.05×104 mx = 4.05 \times 10^4\text{ m} (or 40.5 km40.5\text{ km})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write units explicitly inside intermediate calculations so you can cross out canceling units.

  • Perform a quick mental scale check: ask whether the resulting number should be larger or smaller after changing units.

  • Review unit chain-linking (factor-label method) before carrying forward values into motion equations.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the time from minutes to seconds when multiplying by velocity in m/s, calculating distance as velocity times minutes directly.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=1083.6=30 m/sv = \frac{108}{3.6} = 30\text{ m/s}

  2. Step 2

    d=43.2×1.609=69.5088 km  ⟹  t=69.5088108=0.6436 h  ⟹  t=0.6436×60=38.62 mind = 43.2 \times 1.609 = 69.5088\text{ km} \implies t = \frac{69.5088}{108} = 0.6436\text{ h} \implies t = 0.6436 \times 60 = 38.62\text{ min}

  3. Step 3

    x=v×t  ⟹  x=30×22.5=675 mx = v \times t \implies x = 30 \times 22.5 = 675\text{ m}

    Correct

    t=22.5 min×60 s/min=1350 s  ⟹  x=30.0 m/s×1350 s=40500 m=4.05×104 mt = 22.5\text{ min} \times 60\text{ s/min} = 1350\text{ s} \implies x = 30.0\text{ m/s} \times 1350\text{ s} = 40500\text{ m} = 4.05 \times 10^4\text{ m}

    You multiplied a velocity in meters per second (m/s\text{m/s}) directly by a time in minutes (min\text{min}). Because the units of time did not match, the result was off by a factor of 6060.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the conversion factor of 3.63.6 to switch from km/h\text{km/h} to m/s\text{m/s}.

You accurately converted miles to kilometers using the given equivalence.

You used the kinematic formula x=vtx = vt properly for uniform motion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit mismatch in time

You substituted the elapsed time in minutes directly into x=vtx = vt while using velocity in m/s\text{m/s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking dimensional consistency during substitution: when velocity is expressed in meters per second (m/s\text{m/s}), time must be expressed in seconds (s\text{s}) so that the second units cancel out, leaving meters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Check
  • Every kinematic equation must be dimensionally consistent: [m]=[m/s]×[s][\text{m}] = [\text{m/s}] \times [\text{s}].

  • Always write down explicit units alongside numbers during intermediate steps to verify that non-base units cancel.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the given time to seconds: t=22.5 min×60 s/min=1350 st = 22.5\text{ min} \times 60\text{ s/min} = 1350\text{ s}.

  2. Apply the uniform motion formula: x=v×t=30.0 m/s×1350 s=40500 mx = v \times t = 30.0\text{ m/s} \times 1350\text{ s} = 40500\text{ m}.

Final answer

x=4.05×104 mx = 4.05 \times 10^4\text{ m} (or 40.5 km40.5\text{ km})

NEXT STEPS
Final Takeaways from Your Teacher
  • Include unit symbols inside each calculation line to catch mismatched time units immediately.

  • Practice converting mixed units of time (minutes or hours) to base SI units (seconds) before entering them into kinematic formulas.

Lock it in

Similar question

01

A high-speed train travels at a constant velocity of 144 km/h144\text{ km/h}. Express this velocity in m/s\text{m/s}, and find the distance in meters it covers in 45 seconds45\text{ seconds}.

Answer

v=40.0 m/sv = 40.0\text{ m/s}; distance d=1800 md = 1800\text{ m}. Key steps: v=1443.6=40.0 m/sv = \frac{144}{3.6} = 40.0\text{ m/s}; d=v⋅t=40.0 m/s×45 s=1800 md = v \cdot t = 40.0\text{ m/s} \times 45\text{ s} = 1800\text{ m}.

02

A delivery van travels 25.0 miles25.0\text{ miles} along a straight highway at a steady speed of 90.0 km/h90.0\text{ km/h}. Given that 1 mile=1.609 km1\text{ mile} = 1.609\text{ km}, determine the time required for this trip in minutes, and the van's speed in SI units (extm/s ext{m/s}).

Answer

v=25.0 m/sv = 25.0\text{ m/s}; travel time t≈26.8 mint \approx 26.8\text{ min}. Key steps: v=90.03.6=25.0 m/sv = \frac{90.0}{3.6} = 25.0\text{ m/s}; total distance d=25.0×1.609=40.225 kmd = 25.0 \times 1.609 = 40.225\text{ km}; t=40.225 km90.0 km/h≈0.4469 h=0.4469×60 min≈26.8 mint = \frac{40.225\text{ km}}{90.0\text{ km/h}} \approx 0.4469\text{ h} = 0.4469 \times 60\text{ min} \approx 26.8\text{ min}.

03

Two stations are separated by 12.0 miles12.0\text{ miles} (1 mile=1.609 km1\text{ mile} = 1.609\text{ km}). A drone flies from the first station toward the second at a uniform velocity of 54.0 km/h54.0\text{ km/h}. After flying for 15.0 minutes15.0\text{ minutes}, how far is the drone from the second station, expressed in meters?

Answer

Remaining distance ≈5808 m\approx 5808\text{ m} (or 5.81 km5.81\text{ km}). Key steps: Total distance dtotal=12.0×1.609 km=19.308 km=19308 md_{\text{total}} = 12.0 \times 1.609\text{ km} = 19.308\text{ km} = 19308\text{ m}. Drone speed v=54.03.6=15.0 m/sv = \frac{54.0}{3.6} = 15.0\text{ m/s}. Flight time t=15.0×60=900 st = 15.0 \times 60 = 900\text{ s}. Distance covered d1=15.0 m/s×900 s=13500 md_1 = 15.0\text{ m/s} \times 900\text{ s} = 13500\text{ m}. Remaining distance =19308 m−13500 m=5808 m= 19308\text{ m} - 13500\text{ m} = 5808\text{ m}.

Loading workspace…