Resources
A physics student pushes a heavy storage trunk across a concrete floor by applying a downward-angled pushing force of magnitude directed at an angle below the horizontal. The mass of the trunk is , and the coefficient of kinetic friction between the trunk and the floor is . Taking : (a) Identify all forces acting on the trunk. (b) Explain conceptually why the normal force is not equal to the gravitational weight . (c) Calculate the exact magnitude of the normal force and the kinetic frictional force . (d) Determine whether the applied horizontal force component is sufficient to keep the trunk accelerating, moving at constant velocity, or decelerating.
Answer and steps
Final answer
(a) Applied pushing force (directed forward and downward at below horizontal); Gravitational force (vertically downward); Normal force (vertically upward); Kinetic frictional force (horizontal, opposing the direction of motion). (b) The downward vertical component of the pushing force () presses the trunk further into the floor, requiring the normal force to balance both gravity and this downward push: . (c) and . (d) Since the forward horizontal applied force exceeds , the net horizontal force is , meaning the trunk accelerates forward.
Steps
Part (a): Identification of Forces
To analyze the motion of the trunk, consider all interactions between the trunk and its surroundings:
- Applied Pushing Force (): Directed forward and downward at an angle of below the horizontal.
- Gravitational Force ( or ): Acts vertically downward toward the center of the Earth, with magnitude .
- Normal Force (): The perpendicular contact force exerted upward by the floor on the trunk.
- Kinetic Frictional Force (): The parallel contact force exerted by the floor, directed horizontally backward opposite to the direction of motion.
Part (b): Conceptual Explanation of the Normal Force
A common pitfall is to assume that the normal force always equals the object's weight ().
Since the trunk does not accelerate vertically, the net force along the vertical axis must be zero:
Choosing the upward direction as positive, the forces in the vertical direction are:
- Upward: Normal force
- Downward: Gravitational force
- Downward: Vertical component of the pushing force,
Writing Newton's second law for the vertical axis:
Because the applied force pushes downward into the floor, the floor must exert an additional upward contact force to support both the weight of the trunk and the downward push. Consequently, .
Part (c): Calculating and
- Calculate the Gravitational Force ():
- Calculate the Downward Component of the Push ():
- Determine the Normal Force ():
- Determine the Kinetic Friction Force ():
Part (d): Horizontal Dynamics and Motion State
To determine whether the trunk accelerates, moves at constant velocity, or decelerates, evaluate the net force along the horizontal axis ():
- Horizontal Applied Component ():
- Net Horizontal Force (): (or )
Because the forward horizontal force () exceeds the opposing kinetic friction force (), the net horizontal force is positive in the direction of motion. According to Newton's second law (), the trunk will accelerate forward.
Typical errors
01 The student assumes the normal force is simply equal to the trunk's weight, neglecting the vertical component of the applied pushing force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Forces acting on the trunk: weight (gravity), normal force, applied push force, kinetic friction force.
- Step 2
The floor only supports the object's mass against gravity, so normal force equals .
CorrectBecause the pushing force is directed downward at below horizontal, its vertical component presses the trunk into the floor. The floor must support both the gravitational weight and this downward push, making .
- Step 3Correct
You omitted the downward component from the vertical force balance, which caused both the calculated normal force and the resulting kinetic friction force to be too low.
- Step 4Correct
Your final qualitative conclusion that the trunk accelerates is correct, but your comparison used your underestimated friction force ( instead of ). With the correct values, still exceeds by roughly .
WHAT YOU DID WELL
Compliments from Your TeacherYou identified all four distinct forces acting on the trunk.
You resolved the horizontal component of the pushing force using .
You correctly applied the friction relation .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the normal force as inherently equal to the object's weight (), missing that any force with a vertical component also contributes to vertical equilibrium.
REASONING PATH
Your ACEpath teacher’s suggested approach- Resolve All Angled Vectors
Before summing vertical forces, split every diagonal force into its horizontal () and vertical () components.
Always draw a quick free-body diagram showing acting vertically downward.
- Set Up Vertical Equilibrium
When there is no vertical acceleration, Newton's second law requires .
Write the complete equation to solve for rather than assuming .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the vertical component of the push: directed downward.
Apply vertical equilibrium : .
Compute the corrected kinetic friction: .
Compare horizontal components: .
, , and the trunk accelerates forward.
02 The student subtracts the vertical component of the applied force instead of adding it, confusing a downward push with an upward pull.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Forces acting on the trunk: gravity (downward), normal force (upward), applied force (downward and forward), friction (backward).
- Step 2
The applied force has a vertical component that alters the contact force with the floor, so does not equal .
- Step 3Correct
Because the applied force pushes downward at below the horizontal, its vertical component acts downward alongside gravity. Setting yields , so you need to add rather than subtract it.
- Step 4Correct
You applied the friction formula correctly, but the result is inaccurate because it inherited the incorrect normal force from the previous step.
- Step 5Correct
Your conclusion that the trunk accelerates is qualitatively correct because , but your numerical comparison used the underestimated friction value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly listed all individual forces acting on the trunk.
You recognized that the vertical component of the applied force prevents the normal force from being simply equal to .
You calculated the horizontal force component accurately using the cosine function.
You understood the dynamical criterion that comparing horizontal force with kinetic friction determines acceleration.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou subtracted the vertical component of the applied force instead of adding it.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the downward push as if it were lifting the trunk (an upward pull). A downward angled force presses an object harder against the supporting surface, increasing the normal force: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Direction of Applied Force Components
A force applied below the horizontal pushes downward ( direction), whereas a force applied above the horizontal pulls upward ( direction).
Always draw an arrow for the force component along the vertical axis before setting up .
- Vertical Equilibrium
For an object resting on a horizontal floor, .
Use when pushing downward, and when pulling upward.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the vertical force equilibrium: .
Solve for the normal force: .
Calculate kinetic friction using the corrected normal force: .
Compare forward force to friction: .
, , and the trunk accelerates forward because the forward force exceeds friction by .
03 The student compares the full magnitude of the pushing force directly to friction instead of using its horizontal component.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Gravitational force, normal force, applied pushing force, and kinetic friction force.
- Step 2
The push acts partly downward, adding an extra downward force , so the floor must push up with .
- Step 3
- Step 4Correct
Because the pushing force is angled at below the horizontal, only its horizontal component acts along the direction of motion. You used the full vector magnitude as the horizontal force.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly listed all interactions acting on the object.
You set up the vertical equilibrium condition and accounted for the downward component of the push.
You accurately evaluated the normal force and the resulting kinetic friction force.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the total vector magnitude of the pushing force as purely horizontal when comparing it to friction.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisForgetting that any force directed at an angle relative to an axis must be decomposed into orthogonal components along both coordinate axes before applying Newton's second law along that axis.
REASONING PATH
Your ACEpath teacher’s suggested approach- Decompose Angled Vectors First
For a force at angle to the horizontal, the horizontal component is and the vertical component is .
Always draw a right triangle for angled forces and resolve both components before setting up .
- Compare Parallel Components Only
Friction acts strictly parallel to the surface, so it can only be directly compared to or summed with forces along that same parallel axis.
Ensure every term in your horizontal net force equation carries the factor or is already aligned with the horizontal axis.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompare the forward horizontal force to the opposing kinetic friction force :
Because exceeds (giving a net forward force of ), the trunk is accelerating.
Lock it in
Does the normal force on a horizontal surface always equal the gravitational force ()?
No. The normal force adjusts to satisfy vertical equilibrium . Any extra vertical force (such as an angled push or pull) changes .
Similar question
A crate rests on a horizontal floor. A worker pulls a rope attached to the crate with a force of directed at above the horizontal. Taking , find the magnitude of the normal force exerted by the floor on the crate.
Answer
. Vertical equilibrium requires , so .
A lawnmower is pushed across a lawn with a handle force of directed at below the horizontal. If the coefficient of kinetic friction between the lawn and mower is , calculate the kinetic friction force acting on the mower ().
Answer
. First find . Then .
A block is pushed along a horizontal surface with a force directed at below the horizontal. The coefficient of kinetic friction is , and . What minimum pushing force is required to move the block at a constant velocity?
Answer
. For constant velocity, . Since , substitute: . Rearranging yields .