Resources

A 2.50 kg2.50\text{ kg} package is released from rest at the top of a rough inclined plane that is 4.00 m4.00\text{ m} long and tilted at an angle of θ=30.0∘\theta = 30.0^\circ above the horizontal. The coefficient of kinetic friction between the package and the incline is μk=0.220\mu_k = 0.220. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) the magnitude of thermal energy generated due to friction as the package slides down the entire length of the ramp, and (b) the speed of the package when it reaches the bottom of the ramp.

Answer and steps

Final answer

(a) Eth=18.7 JE_{\text{th}} = 18.7\text{ J}, (b) v=4.92 m/sv = 4.92\text{ m/s}

Steps

Part (a): Thermal Energy Generated by Friction

  1. Identify the forces perpendicular to the incline:
    Choosing a coordinate system where the xx-axis is parallel to the inclined plane (directed downwards) and the yy-axis is perpendicular to the plane:

    • The component of gravity perpendicular to the incline is Fg,y=mgcos⁡θF_{g,y} = m g \cos\theta.
    • Because there is no motion perpendicular to the ramp, the normal force balances this component: N=mgcos⁡θN = m g \cos\theta
  2. Calculate the magnitude of the normal force: N=(2.50 kg)(9.80 m/s2)(cos⁡30.0∘)≈(24.5 N)(0.8660)≈21.22 NN = (2.50\text{ kg})(9.80\text{ m/s}^2)(\cos 30.0^\circ) \approx (24.5\text{ N})(0.8660) \approx 21.22\text{ N}
  3. Determine the force of kinetic friction:
    The kinetic friction force opposing the motion along the surface is: fk=μkN=0.220×21.218 N≈4.668 Nf_k = \mu_k N = 0.220 \times 21.218\text{ N} \approx 4.668\text{ N}
  4. Calculate the thermal energy produced:
    The thermal energy EthE_{\text{th}} dissipated into the block and surface corresponds to the work done against friction over the distance d=4.00 md = 4.00\text{ m}: Eth=fkd=(4.668 N)(4.00 m)≈18.67 J≈18.7 JE_{\text{th}} = f_k d = (4.668\text{ N})(4.00\text{ m}) \approx 18.67\text{ J} \approx 18.7\text{ J}

Part (b): Speed at the Bottom of the Ramp

  1. Apply the Work-Energy Theorem:
    The total mechanical energy initially is purely gravitational potential energy relative to the bottom of the incline (h=0h = 0): Ei=mgh=mg(dsin⁡θ)E_i = m g h = m g (d \sin\theta)

    Substituting the values: Ei=(2.50 kg)(9.80 m/s2)(4.00 m⋅sin⁡30.0∘)=(24.5 N)(2.00 m)=49.0 JE_i = (2.50\text{ kg})(9.80\text{ m/s}^2)(4.00\text{ m} \cdot \sin 30.0^\circ) = (24.5\text{ N})(2.00\text{ m}) = 49.0\text{ J}

  2. Relate initial energy, thermal energy, and final kinetic energy:
    By conservation of energy, the mechanical energy lost appears as thermal energy: Ei−Eth=Ef=12mv2E_i - E_{\text{th}} = E_f = \frac{1}{2} m v^2
  3. Compute the final kinetic energy and solve for speed vv:
    Using the intermediate value for thermal energy: Ef=49.0 J−18.7 J=30.3 JE_f = 49.0\text{ J} - 18.7\text{ J} = 30.3\text{ J}

    12(2.50 kg)v2=30.3 J\frac{1}{2} (2.50\text{ kg}) v^2 = 30.3\text{ J} v2=2×30.3 J2.50 kg=24.24 m2/s2v^2 = \frac{2 \times 30.3\text{ J}}{2.50\text{ kg}} = 24.24\text{ m}^2/\text{s}^2 v=24.24 m2/s2≈4.92 m/sv = \sqrt{24.24\text{ m}^2/\text{s}^2} \approx 4.92\text{ m/s}

Pitfall note: Be careful not to use mgdm g d directly for the initial potential energy; only the vertical height h=dsin⁡θh = d \sin\theta changes gravitational potential energy.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the normal force as m * g without the cosine component for an inclined plane, overestimating the normal force and thermal energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N=m∗g=2.50∗9.80=24.5 NN = m * g = 2.50 * 9.80 = 24.5\text{ N}

    Correct

    N=mgcos⁡θ=(2.50 kg)(9.80 m/s2)(cos⁡30.0∘)≈21.2 NN = m g \cos\theta = (2.50\text{ kg})(9.80\text{ m/s}^2)(\cos 30.0^\circ) \approx 21.2\text{ N}

    On an inclined plane tilted at angle θ\theta, gravity has components parallel and perpendicular to the surface. The normal force balances only the perpendicular component, giving N=mgcos⁡θN = mg\cos\theta, not the full weight mgmg.

  2. Step 2

    fk=μk∗N=0.220∗24.5=5.39 N  ⟹  Eth=fk∗d=5.39∗4.00=21.56 Jf_k = \mu_k * N = 0.220 * 24.5 = 5.39\text{ N} \implies E_{\text{th}} = f_k * d = 5.39 * 4.00 = 21.56\text{ J}

    Correct

    fk=μkN=0.220×21.22 N≈4.67 N  ⟹  Eth=fkd=(4.67 N)(4.00 m)≈18.7 Jf_k = \mu_k N = 0.220 \times 21.22\text{ N} \approx 4.67\text{ N} \implies E_{\text{th}} = f_k d = (4.67\text{ N})(4.00\text{ m}) \approx 18.7\text{ J}

    Your formulas for friction force and dissipated thermal energy were applied correctly, but substituting the incorrect normal force propagated into an inflated value for EthE_{\text{th}}.

  3. Step 3

    (12)∗m∗v2=m∗g∗d∗sin⁡(30∘)−Eth  ⟹  1.25∗v2=49.0−21.56=27.44  ⟹  v=4.69 m/s\left(\frac{1}{2}\right) * m * v^2 = m * g * d * \sin(30^\circ) - E_{\text{th}} \implies 1.25 * v^2 = 49.0 - 21.56 = 27.44 \implies v = 4.69\text{ m/s}

    Correct

    12mv2=mgdsin⁡(30.0∘)−18.67 J=49.0 J−18.67 J=30.33 J  ⟹  v=2×30.33 J2.50 kg≈4.92 m/s\frac{1}{2} m v^2 = m g d \sin(30.0^\circ) - 18.67\text{ J} = 49.0\text{ J} - 18.67\text{ J} = 30.33\text{ J} \implies v = \sqrt{\frac{2 \times 30.33\text{ J}}{2.50\text{ kg}}} \approx 4.92\text{ m/s}

    Your energy conservation setup and vertical height conversion (h=dsin⁡θh = d\sin\theta) were completely correct, but using Eth=21.56 JE_{\text{th}} = 21.56\text{ J} instead of 18.67 J18.67\text{ J} led to an underestimate of the final speed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that thermal energy equals the work done against friction, Eth=fkdE_{\text{th}} = f_k d.

You correctly related the vertical height to the ramp distance using h=dsin⁡θh = d\sin\theta.

You set up and solved the work-energy balance equation with excellent algebraic precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Normal force on an inclined plane

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the flat-ground formula N=mgN = mg rather than resolving gravitational force along the tilted axis perpendicular to the ramp (N=mgcos⁡θN = mg\cos\theta).

REASONING PATH
Your ACEpath teacher’s suggested approach
Perpendicular Equilibrium
  • On a ramp tilted at angle θ\theta with no perpendicular acceleration, the normal force is N=mgcos⁡θN = mg\cos\theta.

  • Always draw a free-body diagram rotated to match the incline coordinate axes before calculating normal force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate normal force: N=mgcos⁡(30.0∘)=(2.50)(9.80)(0.8660)≈21.22 NN = mg\cos(30.0^\circ) = (2.50)(9.80)(0.8660) \approx 21.22\text{ N}.

  2. Recalculate friction and thermal energy: fk=0.220×21.22 N≈4.668 Nf_k = 0.220 \times 21.22\text{ N} \approx 4.668\text{ N}, so Eth=(4.668 N)(4.00 m)≈18.7 JE_{\text{th}} = (4.668\text{ N})(4.00\text{ m}) \approx 18.7\text{ J}.

  3. Substitute into energy conservation: 12(2.50)v2=49.0−18.67=30.33 J  ⟹  v≈4.92 m/s\frac{1}{2}(2.50)v^2 = 49.0 - 18.67 = 30.33\text{ J} \implies v \approx 4.92\text{ m/s}.

Final answer

(a) Eth=18.7 JE_{\text{th}} = 18.7\text{ J}, (b) v=4.92 m/sv = 4.92\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice resolving gravity vectors into parallel (mgsin⁡θmg\sin\theta) and perpendicular (mgcos⁡θmg\cos\theta) components on inclines.

  • Verify limiting cases: when θ=0∘\theta = 0^\circ, cos⁡0∘=1\cos 0^\circ = 1 gives N=mgN = mg; when θ=90∘\theta = 90^\circ, cos⁡90∘=0\cos 90^\circ = 0 gives N=0N = 0.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the sine and cosine components on the inclined plane, using sin(θ) for the normal force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N=m⋅g⋅sin⁡(30∘)=2.50⋅9.80⋅0.5=12.25 NN = m \cdot g \cdot \sin(30^\circ) = 2.50 \cdot 9.80 \cdot 0.5 = 12.25\text{ N}

    Correct

    N=mgcos⁡(30.0∘)=(2.50)(9.80)(cos⁡30.0∘)≈21.22 NN = m g \cos(30.0^\circ) = (2.50)(9.80)(\cos 30.0^\circ) \approx 21.22\text{ N}

    When an incline is tilted at angle θ\theta above the horizontal, the component of gravity perpendicular to the surface is mgcos⁡θmg\cos\theta, so the balancing normal force is N=mgcos⁡θN = mg\cos\theta rather than mgsin⁡θmg\sin\theta.

  2. Step 2

    fk=0.220⋅12.25=2.695 N  ⟹  Eth=fk⋅d=2.695⋅4.00=10.78 Jf_k = 0.220 \cdot 12.25 = 2.695\text{ N} \implies E_{\text{th}} = f_k \cdot d = 2.695 \cdot 4.00 = 10.78\text{ J}

    Correct

    fk=μkN=0.220×21.22 N≈4.668 N  ⟹  Eth=fkd≈18.7 Jf_k = \mu_k N = 0.220 \times 21.22\text{ N} \approx 4.668\text{ N} \implies E_{\text{th}} = f_k d \approx 18.7\text{ J}

    Your formulas fk=μkNf_k = \mu_k N and Eth=fkdE_{\text{th}} = f_k d are completely correct, but the result is affected by the incorrect normal force from Step 1.

  3. Step 3

    12mv2=mgdsin⁡(30∘)−Eth  ⟹  1.25v2=49.0−10.78=38.22  ⟹  v2=30.576  ⟹  v=5.53 m/s\frac{1}{2} m v^2 = m g d \sin(30^\circ) - E_{\text{th}} \implies 1.25 v^2 = 49.0 - 10.78 = 38.22 \implies v^2 = 30.576 \implies v = 5.53\text{ m/s}

    Correct

    12mv2=mgdsin⁡(30.0∘)−Eth=49.0 J−18.67 J=30.33 J  ⟹  v=2×30.33 J2.50 kg≈4.92 m/s\frac{1}{2} m v^2 = m g d \sin(30.0^\circ) - E_{\text{th}} = 49.0\text{ J} - 18.67\text{ J} = 30.33\text{ J} \implies v = \sqrt{\frac{2 \times 30.33\text{ J}}{2.50\text{ kg}}} \approx 4.92\text{ m/s}

    You correctly applied the conservation of energy principle relating initial potential energy, thermal dissipation, and final kinetic energy, but using the incorrect value of EthE_{\text{th}} produced 5.53 m/s5.53\text{ m/s} instead of 4.92 m/s4.92\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related kinetic friction to the normal force using fk=μkNf_k = \mu_k N.

You correctly recognized that thermal energy generated equals the work done against friction, Eth=fkdE_{\text{th}} = f_k d.

You accurately identified the vertical height as h=dsin⁡θh = d\sin\theta to find the initial gravitational potential energy.

You correctly set up the energy conservation relation Ei−Eth=12mv2E_i - E_{\text{th}} = \frac{1}{2}mv^2 to solve for final speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric component confusion on inclined plane

You swapped the trigonometric functions for gravity components on an incline, using sin⁡θ\sin\theta instead of cos⁡θ\cos\theta for the perpendicular axis.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing which trigonometric ratio corresponds to the perpendicular versus parallel components of weight when the angle of inclination is measured relative to the horizontal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Incline Coordinate Decomposition
  • For a ramp inclined at angle θ\theta to the horizontal, weight points vertically downward: the component parallel to the ramp is mgsin⁡θmg\sin\theta, and the component perpendicular into the ramp is mgcos⁡θmg\cos\theta.

  • Draw the right triangle formed by the gravity vector. Notice that the angle between the true vertical gravity vector and the perpendicular to the ramp is θ\theta, making the perpendicular leg adjacent to θ\theta (mgcos⁡θmg\cos\theta).

Extreme-Angle Sanity Check
  • As the incline angle approaches zero (a flat surface), the normal force must equal the full weight mgmg.

  • Test θ=0∘\theta = 0^\circ: cos⁡(0∘)=1\cos(0^\circ) = 1 gives N=mgN = mg, whereas sin⁡(0∘)=0\sin(0^\circ) = 0 would give zero normal force. Always choose the function that yields full weight at zero tilt.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct normal force: N=mgcos⁡(30.0∘)=(2.50 kg)(9.80 m/s2)(0.8660)≈21.22 NN = m g \cos(30.0^\circ) = (2.50\text{ kg})(9.80\text{ m/s}^2)(0.8660) \approx 21.22\text{ N}.

  2. Compute the kinetic friction force: fk=μkN=0.220×21.218 N≈4.668 Nf_k = \mu_k N = 0.220 \times 21.218\text{ N} \approx 4.668\text{ N}.

  3. Calculate the thermal energy generated: Eth=fkd=(4.668 N)(4.00 m)≈18.67 J≈18.7 JE_{\text{th}} = f_k d = (4.668\text{ N})(4.00\text{ m}) \approx 18.67\text{ J} \approx 18.7\text{ J}.

  4. Subtract thermal energy from initial potential energy: Ek=49.0 J−18.67 J=30.33 JE_k = 49.0\text{ J} - 18.67\text{ J} = 30.33\text{ J}.

  5. Solve for the final speed: v=2×30.33 J2.50 kg≈4.92 m/sv = \sqrt{\frac{2 \times 30.33\text{ J}}{2.50\text{ kg}}} \approx 4.92\text{ m/s}.

Final answer

(a) Eth=18.7 JE_{\text{th}} = 18.7\text{ J}, (b) v=4.92 m/sv = 4.92\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams on inclined planes and explicitly decomposing the weight vector into parallel (mgsin⁡θmg\sin\theta) and perpendicular (mgcos⁡θmg\cos\theta) components.

  • Perform the boundary check at θ=0∘\theta = 0^\circ on any inclined plane force component before calculating numerical values.

OverviewACEpath Teacher's Diagnosis

03 The student ignores the thermal energy lost to friction when calculating the final velocity, incorrectly assuming mechanical energy is conserved.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=m⋅g⋅cos⁡(30∘)=2.50⋅9.80⋅0.866=21.22 N  ⟹  fk=0.220⋅21.22=4.67 N  ⟹  Eth=4.67⋅4.00=18.68 JN = m \cdot g \cdot \cos(30^\circ) = 2.50 \cdot 9.80 \cdot 0.866 = 21.22\text{ N} \implies f_k = 0.220 \cdot 21.22 = 4.67\text{ N} \implies E_{\text{th}} = 4.67 \cdot 4.00 = 18.68\text{ J}

  2. Step 2

    (12)mv2=mgh=mgdsin⁡(30∘)\left(\frac{1}{2}\right) m v^2 = m g h = m g d \sin(30^\circ)

    Correct

    Ei−Eth=Ef  ⟹  mgdsin⁡(30.0∘)−Eth=12mv2E_i - E_{\text{th}} = E_f \implies m g d \sin(30.0^\circ) - E_{\text{th}} = \frac{1}{2} m v^2

    Because friction is present, mechanical energy is not conserved. You must subtract the dissipated thermal energy EthE_{\text{th}} from the initial potential energy.

  3. Step 3

    (12)v2=gdsin⁡(30∘)  ⟹  v2=2⋅9.80⋅4.00⋅0.5=39.2  ⟹  v=6.26 m/s\left(\frac{1}{2}\right) v^2 = g d \sin(30^\circ) \implies v^2 = 2 \cdot 9.80 \cdot 4.00 \cdot 0.5 = 39.2 \implies v = 6.26\text{ m/s}

    Correct

    12(2.50)v2=49.0−18.68=30.32 J  ⟹  v=2×30.322.50≈4.92 m/s\frac{1}{2}(2.50) v^2 = 49.0 - 18.68 = 30.32\text{ J} \implies v = \sqrt{\frac{2 \times 30.32}{2.50}} \approx 4.92\text{ m/s}

    Your algebra is correct, but the calculated speed is too large because it follows from the frictionless energy equation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the component of gravity perpendicular to the incline to find the normal force.

You accurately calculated the kinetic friction force and the work converted to thermal energy.

You correctly related vertical height to ramp distance using h=dsin⁡(30∘)h = d \sin(30^\circ).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Non-Conservative Work

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed total mechanical energy was conserved (Ei=EfE_i = E_f) when setting up part (b), forgetting that non-conservative work done by friction converts part of the mechanical energy into thermal energy (Ei−Eth=EfE_i - E_{\text{th}} = E_f).

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Accounting Check
  • When friction or other non-conservative forces act, mechanical energy changes: Ei+Wnc=EfE_i + W_{\text{nc}} = E_f, or Ei−Eth=EfE_i - E_{\text{th}} = E_f.

  • Always verify whether friction is present before setting mgh=12mv2mgh = \frac{1}{2}mv^2; if friction does work, deduct EthE_{\text{th}} from the initial mechanical energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the full energy conservation balance including thermal loss: mgdsin⁡(30.0∘)−Eth=12mv2m g d \sin(30.0^\circ) - E_{\text{th}} = \frac{1}{2} m v^2.

  2. Substitute the values: (2.50 kg)(9.80 m/s2)(4.00 m)(sin⁡30.0∘)−18.68 J=49.00 J−18.68 J=30.32 J(2.50\text{ kg})(9.80\text{ m/s}^2)(4.00\text{ m})(\sin 30.0^\circ) - 18.68\text{ J} = 49.00\text{ J} - 18.68\text{ J} = 30.32\text{ J}.

  3. Solve for vv: 12(2.50 kg)v2=30.32 J  ⟹  v=2×30.322.50≈4.92 m/s\frac{1}{2}(2.50\text{ kg}) v^2 = 30.32\text{ J} \implies v = \sqrt{\frac{2 \times 30.32}{2.50}} \approx 4.92\text{ m/s}.

Final answer

(a) Eth=18.7 JE_{\text{th}} = 18.7\text{ J}, (b) v=4.92 m/sv = 4.92\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • When solving multi-part work-energy problems, check if your answer from part (a) (such as thermal energy or work by friction) must be incorporated into the energy balance of part (b).

  • Practice writing the general work-energy theorem Ki+Ui+Wother=Kf+UfK_i + U_i + W_{\text{other}} = K_f + U_f before cancelling terms.

Lock it in

Similar question

01

A 5.0 kg5.0\text{ kg} box slides along a flat horizontal floor for 3.0 m3.0\text{ m} under kinetic friction with μk=0.30\mu_k = 0.30. Using g=9.8 m/s2g = 9.8\text{ m/s}^2, how much thermal energy is produced?

Answer

Eth=44.1 JE_{\text{th}} = 44.1\text{ J}. Key steps: On flat ground, N=mg=(5.0)(9.8)=49 NN = mg = (5.0)(9.8) = 49\text{ N}. Friction is fk=μkN=0.30×49=14.7 Nf_k = \mu_k N = 0.30 \times 49 = 14.7\text{ N}. Thermal energy is Eth=fkd=(14.7)(3.0)=44.1 JE_{\text{th}} = f_k d = (14.7)(3.0) = 44.1\text{ J}.

02

A 3.00 kg3.00\text{ kg} sled slides 5.00 m5.00\text{ m} down a slope tilted at 37.0∘37.0^\circ above the horizontal. If μk=0.250\mu_k = 0.250 and g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the thermal energy generated by friction.

Answer

Eth=29.3 JE_{\text{th}} = 29.3\text{ J}. Key steps: N=mgcos⁡(37.0∘)=(3.00)(9.80)(0.7986)≈23.48 NN = mg\cos(37.0^\circ) = (3.00)(9.80)(0.7986) \approx 23.48\text{ N}. Friction force is fk=0.250×23.48 N≈5.87 Nf_k = 0.250 \times 23.48\text{ N} \approx 5.87\text{ N}. Thermal energy is Eth=fkd=(5.87 N)(5.00 m)≈29.3 JE_{\text{th}} = f_k d = (5.87\text{ N})(5.00\text{ m}) \approx 29.3\text{ J}.

03

A 2.00 kg2.00\text{ kg} block is pushed up a ramp angled at 45.0∘45.0^\circ by an applied force parallel to the incline. If μk=0.150\mu_k = 0.150 and the block travels 2.50 m2.50\text{ m}, find the thermal energy generated and compare the normal force on this incline to the block's weight.

Answer

Eth=5.20 JE_{\text{th}} = 5.20\text{ J}; N≈13.9 NN \approx 13.9\text{ N} while weight is W=19.6 NW = 19.6\text{ N} (N=Wcos⁡45∘≈0.707WN = W\cos 45^\circ \approx 0.707 W). Key steps: N=(2.00)(9.80)(cos⁡45.0∘)≈13.86 NN = (2.00)(9.80)(\cos 45.0^\circ) \approx 13.86\text{ N}. Friction is fk=0.150×13.86≈2.079 Nf_k = 0.150 \times 13.86 \approx 2.079\text{ N}. Thermal energy is Eth=(2.079)(2.50)≈5.20 JE_{\text{th}} = (2.079)(2.50) \approx 5.20\text{ J}.

Loading workspace…