Resources

Consider a spacecraft ascending vertically from the surface of Mars (MM=6.417×1023 kgM_M = 6.417 \times 10^{23}\text{ kg}, radius RM=3.390×106 mR_M = 3.390 \times 10^6\text{ m}). Determine the critical altitude hh above the Martian surface at which the gravitational attraction exerted by Mars on the craft drops to exactly 25.0%25.0\% of its surface value.

Answer and steps

Final answer

h=3.39×106 mh = 3.39 \times 10^6\text{ m}

Steps

01

State Newton's Law of Universal Gravitation

According to Newton's law of universal gravitation, the gravitational force FF exerted by a spherical body of mass MM on an object of mass mm at a distance rr from its center is:

F=GMmr2F = \frac{G M m}{r^2}

At the surface of Mars, the spacecraft is at a distance equal to the planet's radius, r0=RMr_0 = R_M. The surface gravitational force is:

F0=GMMmRM2F_0 = \frac{G M_M m}{R_M^2}


02

Relate the Force at Altitude to the Surface Value

At an altitude hh above the Martian surface, the spacecraft's total distance from the center of Mars is:

r=RM+hr = R_M + h

The gravitational force at this position is:

F=GMMm(RM+h)2F = \frac{G M_M m}{(R_M + h)^2}

We are given that the gravitational attraction drops to 25.0%25.0\% of its surface value, meaning F=0.250F0=14F0F = 0.250 F_0 = \frac{1}{4} F_0:

GMMm(RM+h)2=14⋅GMMmRM2\frac{G M_M m}{(R_M + h)^2} = \frac{1}{4} \cdot \frac{G M_M m}{R_M^2}


03

Solve for the Altitude hh

Canceling the common factor GMMmG M_M m from both sides gives:

1(RM+h)2=14RM2\frac{1}{(R_M + h)^2} = \frac{1}{4 R_M^2}

Inverting both sides:

(RM+h)2=4RM2(R_M + h)^2 = 4 R_M^2

Taking the positive square root of both sides:

RM+h=2RMR_M + h = 2 R_M

h=2RM−RM=RMh = 2 R_M - R_M = R_M

Common Pitfall: The distance in Newton's gravitational formula is measured from the center of the planet (rr), not from its surface. Solving for the radial distance yields r=2RMr = 2 R_M, but the question asks for the altitude hh above the surface, which requires subtracting the planet's radius: h=r−RMh = r - R_M.

Substituting the given radius of Mars, RM=3.390×106 mR_M = 3.390 \times 10^6\text{ m}:

h=3.39×106 mh = 3.39 \times 10^6\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student might forget that the gravitational force depends on the distance from the center of Mars and treat the altitude h directly as the total radial distance from the center.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F=G⋅M⋅mr2  ⟹  F(h)=0.25⋅FsurfaceF = \frac{G \cdot M \cdot m}{r^2} \implies F(h) = 0.25 \cdot F_{\text{surface}}

  2. Step 2

    1h2=0.25RM2\frac{1}{h^2} = \frac{0.25}{R_M^2}

    Correct

    1(RM+h)2=0.25RM2\frac{1}{(R_M + h)^2} = \frac{0.25}{R_M^2}

    In Newton's law of gravitation, the distance rr is measured from the center of the celestial body. At an altitude hh above the surface, the total distance from Mars's center is r=RM+hr = R_M + h, not simply hh.

  3. Step 3

    h2=4.00⋅RM2  ⟹  h=2.00⋅RMh^2 = 4.00 \cdot R_M^2 \implies h = 2.00 \cdot R_M

    Correct

    (RM+h)2=4.00RM2  ⟹  RM+h=2.00RM  ⟹  h=RM(R_M + h)^2 = 4.00 R_M^2 \implies R_M + h = 2.00 R_M \implies h = R_M

    Your algebraic simplification and square root operations were executed accurately based on your equation, but the result represents the total radial distance from the center rather than the altitude.

  4. Step 4

    h=2.00⋅(3.390×106 m)=6.780×106 mh = 2.00 \cdot (3.390 \times 10^6\text{ m}) = 6.780 \times 10^6\text{ m}

    Correct

    h=1.00⋅(3.390×106 m)=3.39×106 mh = 1.00 \cdot (3.390 \times 10^6\text{ m}) = 3.39 \times 10^6\text{ m}

    Your numerical calculation was carried out correctly from your algebraic result, but it overestimates the altitude by one planetary radius.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Newton's law of universal gravitation with an inverse-square distance dependence.

You correctly translated 25.0%25.0\% of surface force into the factor 0.250.25.

You solved the resulting quadratic-form equation cleanly by taking square roots on both sides.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Altitude with Center-to-Center Radial Distance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted altitude hh directly into the denominator of Newton's gravitational formula instead of using the total distance from the center of mass, r=R+hr = R + h.

REASONING PATH
Your ACEpath teacher’s suggested approach
Radial Distance Definition
  • In F=GMmr2F = \frac{G M m}{r^2}, the variable rr always represents the distance from the center of the spherical mass, never the distance from its surface.

  • Before writing down Newton's law of gravitation, draw a radial line and write r=R+hr = R + h explicitly.

Converting Center Distance to Altitude
  • Altitude hh is defined relative to the planetary surface: h=r−Rh = r - R.

  • If you find the total radial distance r=2RMr = 2 R_M, remember to subtract the planetary radius RMR_M to find the altitude above the surface: h=2RM−RM=RMh = 2 R_M - R_M = R_M.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the total distance from the center of Mars at altitude hh: r=RM+hr = R_M + h.

  2. Substitute rr into the force ratio equation: 1(RM+h)2=0.25RM2=14RM2\frac{1}{(R_M + h)^2} = \frac{0.25}{R_M^2} = \frac{1}{4 R_M^2}.

  3. Invert and take the square root of both sides: RM+h=2RMR_M + h = 2 R_M.

  4. Solve for the altitude: h=2RM−RM=RMh = 2 R_M - R_M = R_M.

  5. Substitute RM=3.390×106 mR_M = 3.390 \times 10^6\text{ m} to get h=3.39×106 mh = 3.39 \times 10^6\text{ m}.

Final answer

h=3.39×106 mh = 3.39 \times 10^6\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out r=R+hr = R + h before substituting distances into gravitational or orbital equations.

  • Double-check whether a problem asks for the radial distance from the center (rr) or the altitude above the surface (hh).

OverviewACEpath Teacher's Diagnosis

02 A student might assume gravitational force is inversely proportional to distance rather than distance squared.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F=G⋅M⋅mrF = \frac{G \cdot M \cdot m}{r}

    Correct

    F=GMmr2F = \frac{G M m}{r^2}

    Newton's law of universal gravitation is an inverse-square law, meaning gravitational force decreases with the square of the distance from the center of mass (r2r^2), not distance (rr).

  2. Step 2

    F(h)=0.250⋅Fsurface  ⟹  RMRM+h=0.250F(h) = 0.250 \cdot F_{\text{surface}} \implies \frac{R_M}{R_M + h} = 0.250

    Correct

    F(h)Fsurface=RM2(RM+h)2=0.250\frac{F(h)}{F_{\text{surface}}} = \frac{R_M^2}{(R_M + h)^2} = 0.250

    Because of the missing exponent in your gravitational formula, you equated the force ratio directly to RMRM+h\frac{R_M}{R_M + h} instead of the squared ratio RM2(RM+h)2\frac{R_M^2}{(R_M + h)^2}.

  3. Step 3

    RM+h=4.00⋅RM  ⟹  h=3.00⋅RMR_M + h = 4.00 \cdot R_M \implies h = 3.00 \cdot R_M

    Correct

    (RM+h)2=4.00RM2  ⟹  RM+h=2.00RM  ⟹  h=1.00RM(R_M + h)^2 = 4.00 R_M^2 \implies R_M + h = 2.00 R_M \implies h = 1.00 R_M

    Your algebraic manipulation was executed cleanly, but it operated on the incorrect linear ratio.

  4. Step 4

    h=3.00⋅(3.390×106 m)=1.017×107 mh = 3.00 \cdot (3.390 \times 10^6\text{ m}) = 1.017 \times 10^7\text{ m}

    Correct

    h=1.00⋅(3.390×106 m)=3.39×106 mh = 1.00 \cdot (3.390 \times 10^6\text{ m}) = 3.39 \times 10^6\text{ m}

    Evaluating h=3RMh = 3 R_M gives an incorrect final numerical altitude due to the earlier formula error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the distance from the planet's center is the sum of the radius and altitude (r=RM+hr = R_M + h).

You correctly set up the condition that gravitational force at altitude is 25.0%25.0\% of the surface value.

You carried out the algebraic solving and unit arithmetic accurately based on your working equations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse-Square Law Omission

No, this was a conceptual error in stating Newton's law of universal gravitation rather than a simple calculation slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the gravitational force formula with distance in the denominator (1/r1/r) rather than distance squared (1/r21/r^2), treating gravitational force as inversely proportional to distance instead of following the inverse-square law.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverse-Square Law for Gravity
  • Newton's gravitational force obeys F=GMmr2F = \frac{G M m}{r^2}, so force scales as 1r2\frac{1}{r^2}.

  • Always verify the square on radial distance in the denominator before forming force ratios.

Scaling with Ratio Method
  • If FF drops to 14\frac{1}{4} of its original value, then (rsurfacer)2=14\left(\frac{r_{\text{surface}}}{r}\right)^2 = \frac{1}{4}, which implies rrsurface=4=2\frac{r}{r_{\text{surface}}} = \sqrt{4} = 2.

  • Take the square root of the force ratio factor to find the radial distance multiplier.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the inverse-square ratio: F(h)Fsurface=RM2(RM+h)2=0.250=14\frac{F(h)}{F_{\text{surface}}} = \frac{R_M^2}{(R_M + h)^2} = 0.250 = \frac{1}{4}.

  2. Take the reciprocal and then the square root: RM+hRM=4=2\frac{R_M + h}{R_M} = \sqrt{4} = 2.

  3. Solve for hh: RM+h=2RM  ⟹  h=RMR_M + h = 2 R_M \implies h = R_M.

  4. Substitute RM=3.390×106 mR_M = 3.390 \times 10^6\text{ m} to find the altitude.

Final answer

h=3.39×106 mh = 3.39 \times 10^6\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the inverse-square law for gravity and contrast its 1/r21/r^2 dependence with potential energy's 1/r1/r dependence.

  • Practice finding orbital and gravitational critical points by setting up dimensionless ratios before plugging in numerical constants.

OverviewACEpath Teacher's Diagnosis

03 A student might solve for the total orbital radius from the center of Mars and report r instead of the altitude h above the surface.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F(r)Fsurface=(RMr)2=0.250  ⟹  rRM=2.00  ⟹  r=2.00⋅RM\frac{F(r)}{F_{\text{surface}}} = \left(\frac{R_M}{r}\right)^2 = 0.250 \implies \frac{r}{R_M} = 2.00 \implies r = 2.00 \cdot R_M

  2. Step 2

    h=2.00⋅(3.390×106 m)=6.780×106 mh = 2.00 \cdot (3.390 \times 10^6\text{ m}) = 6.780 \times 10^6\text{ m}

    Correct

    h=r−RM=2.00RM−RM=1.00RM=3.39×106 mh = r - R_M = 2.00 R_M - R_M = 1.00 R_M = 3.39 \times 10^6\text{ m}

    You substituted the radius of Mars into 2.00RM2.00 R_M and labeled it as the altitude hh. In gravitational problems, rr represents the total distance from the center of the planet, whereas altitude hh is measured from the surface: h=r−RMh = r - R_M.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that gravitational force follows an inverse-square law with distance from the center.

You correctly calculated that the radial distance must double (r=2.00RMr = 2.00 R_M) for the force to drop to 25.0%25.0\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating radial distance to altitude

You solved for the distance from the planet's center but forgot to subtract the planet's radius to get the height above the surface.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing radial coordinate rr (measured from the celestial body's center) with altitude hh (measured from the celestial body's surface).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Point in Gravity Formulas
  • Newton's law of gravitation F=GMmr2F = \frac{G M m}{r^2} uses the center-to-center separation distance rr.

  • Always sketch the sphere and write the geometric relation r=R+hr = R + h before calculating numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Relate the total radial distance rr to the surface radius RMR_M and altitude hh: r=RM+hr = R_M + h.

  2. Substitute r=2.00RMr = 2.00 R_M: RM+h=2.00RMR_M + h = 2.00 R_M.

  3. Solve for the altitude: h=2.00RM−RM=1.00RMh = 2.00 R_M - R_M = 1.00 R_M.

  4. Substitute RM=3.390×106 mR_M = 3.390 \times 10^6\text{ m} to get h=3.39×106 mh = 3.39 \times 10^6\text{ m}.

Final answer

h=3.39×106 mh = 3.39 \times 10^6\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a quick diagram marking the center of the body, its surface, and the object's position to label RR, hh, and rr.

  • Check whether the problem asks for 'orbital radius / distance from center' (rr) or 'altitude / height above surface' (hh).

Lock it in

Similar question

01

At what altitude hh above Earth's surface (radius RER_E) does the acceleration due to gravity drop to 14\frac{1}{4} of its surface value gg? Express hh in terms of RER_E.

Answer

Since g∝1r2g \propto \frac{1}{r^2}, dropping to 14\frac{1}{4} means r=2REr = 2 R_E. Since r=RE+hr = R_E + h, the altitude is h=2RE−RE=REh = 2 R_E - R_E = R_E.

02

A weather satellite of mass mm is placed in a circular orbit where Earth's gravitational pull on it is exactly 50.0%50.0\% of its value on Earth's surface. Given Earth's radius RE=6.37×106 mR_E = 6.37 \times 10^6\text{ m}, calculate the satellite's altitude hh.

Answer

Setting GMm(RE+h)2=0.500GMmRE2\frac{G M m}{(R_E + h)^2} = 0.500 \frac{G M m}{R_E^2} gives (RE+h)2=2RE2(R_E + h)^2 = 2 R_E^2, so RE+h=2RE≈1.414RER_E + h = \sqrt{2} R_E \approx 1.414 R_E. Thus h=(2−1)RE≈0.414×(6.37×106 m)≈2.64×106 mh = (\sqrt{2} - 1) R_E \approx 0.414 \times (6.37 \times 10^6\text{ m}) \approx 2.64 \times 10^6\text{ m}.

03

A probe ascends from the surface of the Moon (RM=1.737×106 mR_M = 1.737 \times 10^6\text{ m}). It reaches an altitude hh where the gravitational field strength is 1.00 m/s21.00\text{ m/s}^2. If the surface gravity of the Moon is g0=1.62 m/s2g_0 = 1.62\text{ m/s}^2, determine the altitude hh.

Answer

The ratio of gravitational fields is gg0=RM2(RM+h)2=1.001.62\frac{g}{g_0} = \frac{R_M^2}{(R_M + h)^2} = \frac{1.00}{1.62}. Inverting and taking the square root gives RM+hRM=1.62≈1.273\frac{R_M + h}{R_M} = \sqrt{1.62} \approx 1.273. Therefore, h=(1.273−1)RM=0.273×(1.737×106 m)≈4.74×105 mh = (1.273 - 1) R_M = 0.273 \times (1.737 \times 10^6\text{ m}) \approx 4.74 \times 10^5\text{ m}.

Loading workspace…