Resources
A miniature lab test cart has a mass of . It is pulled along a level test track by a calibrated linear actuator applying an angled pulling force of oriented at an angle above the track. The dynamic rolling resistance exerts a opposing drag force of . By converting all parameters into standard SI units and setting up the coordinate equilibrium and dynamical equations from the free-body diagram, calculate the normal force on the cart and its horizontal acceleration . Use .
Answer and steps
Final answer
,
Steps
Convert Given Values to Standard SI Units
Convert the mass from grams to kilograms and the pulling force from dynes to newtons:
- Mass:
- Pulling force ():
- Dynamic resistance:
- Angle of pull:
- Acceleration due to gravity:
Resolve the Applied Force into Orthogonal Components
Break down the pulling force into horizontal () and vertical () components:
- Horizontal component:
- Vertical component:
Apply Vertical Equilibrium to Find the Normal Force ()
Calculate the gravitational force (weight) acting downward on the cart:
Because the cart remains on the horizontal track without lifting off or sinking, the vertical acceleration is zero (). From Newton's second law in the vertical direction:
Solve for :
Common Pitfall: Forgetting to subtract the upward component of the applied force () from the weight often leads to the incorrect assumption that . An upward angled pull partially relieves the normal contact force.
Apply Newton's Second Law to Find Horizontal Acceleration ()
In the horizontal direction, the forward component accelerates the cart while dynamic resistance opposes it:
Substitute the known values into the equation:
Typical errors
01 The student adds the vertical component of the pulling force to gravity instead of subtracting it when solving for normal force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the pulling force is directed above the horizontal, its vertical component pulls upward along with the normal force . In vertical equilibrium, , which means you must subtract from the weight to find .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted all non-standard units into standard SI units.
You resolved the pulling force into its trigonometric components accurately.
You applied Newton's second law along the horizontal axis to obtain the correct acceleration.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou added the upward vertical component of the tension force to the gravitational force instead of setting up .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the normal force as the sum of gravity and the applied vertical component rather than balancing upward forces () against downward forces ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Establish the Coordinate System & Equilibrium Condition
For an object resting on a flat surface with no vertical motion, , meaning upward forces must balance downward forces: .
Always write down before rearranging for the normal force.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up vertical force equilibrium:
Isolate :
Substitute numerical values:
,
02 The student interchanges the sine and cosine trigonometric projections for the pulling force components.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the angle is measured relative to the horizontal track, the vertical component is opposite to the angle and requires , not .
- Step 3Correct
The horizontal pulling component is adjacent to the track angle , so it requires the cosine projection rather than .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted all given units into standard SI units ( and ).
You recognized that an upward angled pull reduces the normal force and subtracted the vertical pull component from the weight.
You correctly applied Newton's second law along the horizontal direction by subtracting friction from the forward force component.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou interchanged the sine and cosine functions when projecting the pulling force into horizontal and vertical components.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing adjacent and opposite sides of the right triangle formed by the force vector and the reference axis. When an angle is given with respect to the horizontal, the horizontal leg is adjacent () and the vertical leg is opposite ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Axis Alignment
For an angle measured relative to the horizontal, the adjacent side lies along the horizontal () and the opposite side lies along the vertical ().
Sketch a right triangle with the force vector as the hypotenuse, identify which side is adjacent to the given angle, and assign cosine to that axis.
- Extreme Angle Check
As , pulling should become entirely horizontal () and have zero vertical lift ().
Mentally test : since and , verify that your chosen functions match this limit.
CORRECTED PATH
ACEpath Teacher's DemonstrationResolve the vertical force: .
Find the normal force from vertical equilibrium: .
Resolve the horizontal force: .
Compute horizontal acceleration: .
03 The student misremembers the dyne-to-newton conversion factor as 10³ instead of 10⁵ dynes per newton.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You converted grams to kilograms correctly, but you divided the force in dynes by instead of . Since , equals .
- Step 2Correct
Your symbolic equation correctly balances vertical forces (). Your negative result was caused entirely by substituting the inflated force .
- Step 3Correct
Your horizontal equation of motion is completely correct. Substituting the correct value of yields .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the cart mass from grams to kilograms.
You correctly resolved the angled force into its horizontal and vertical components.
You set up the vertical equilibrium condition without missing the upward relief component.
You formulated Newton's second law for the horizontal direction accurately as .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual recall gap regarding CGS versus SI units of force ().
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the prefix multiplier for mass () with the compound force conversion factor between newtons and dynes (). A negative normal force on a level track was a direct physical clue that the upward force had been overestimated.
REASONING PATH
Your ACEpath teacher’s suggested approach- Derive Compound Units from Base SI and CGS Definitions
.
Whenever converting non-standard CGS units, reconstruct the conversion factor from base dimensions: mass length.
- Sanity Check on Normal Force Sign
A track supports an object by pushing upward, so . If , the upward pull exceeds gravity and lifts the cart off the track.
If a flat-track calculation yields , re-check your applied vertical force magnitude or re-evaluate whether contact is broken.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the pulling force using : .
Compute the vertical and horizontal force components: and .
Evaluate the normal force: .
Evaluate horizontal acceleration: .
,
Lock it in
When a pulling force is directed at an angle above the horizontal on a flat floor, what is the vertical equilibrium equation?
, which gives . The upward pull relieves some of the normal contact force.
Similar question
A sled is pulled along level ground by a rope exerting a force of at an angle of above the horizontal (, ). If , calculate the normal force acting on the sled.
Answer
. Key steps: . Vertical pull is . In equilibrium, .
A person pushes a lawnmower of mass along a horizontal lawn with a force of directed along the handle at an angle of below the horizontal. Taking , find the normal force exerted by the ground on the lawnmower.
Answer
. Key steps: Downward push component is . Weight is . Since the push is downward, .
A block is pulled across a rough horizontal floor by a force directed at above the horizontal. The coefficient of kinetic friction is . Using , determine the normal force , the kinetic friction force , and the horizontal acceleration .
Answer
, , . Key steps: ; . . Friction is . Net horizontal force . Acceleration .