Resources
A hydraulic jack is actuated by a rigid horizontal lever of total length pivoted at a hinge on its left end. The vertical input piston (diameter ) is connected to the lever at a distance from the hinge. The input piston transfers pressure through hydraulic fluid to an output lift cylinder (diameter ) located at the same height. If a technician pushes vertically downward on the rightmost free end of the lever with an effort force of , determine the maximum mass of a machine that the output lift cylinder can elevate at constant speed (take ).
Answer and steps
Final answer
Steps
Find the downward force applied to the input piston
The horizontal lever acts as a class-2 lever pivoted at its left end. For the lever to be in rotational equilibrium about the hinge:
Taking torques about the pivot:
- The downward effort force acts at a lever arm of .
- The input piston exerts an upward reaction force on the lever at a distance . By Newton's third law, the lever exerts an equal downward force on the input piston.
Setting clockwise and counterclockwise torques equal:
Use Pascal's principle to calculate the output force
According to Pascal's principle, pressure applied to an enclosed, incompressible fluid is transmitted undiminished to every portion of the fluid and the walls of the vessel. Because both pistons are at the same vertical height:
where the cross-sectional area of a cylindrical piston of diameter is . Substituting the areas gives:
Calculate the ratio of the diameters:
Now compute the upward force provided by the output cylinder:
Determine the maximum mass elevated
At constant speed, the net vertical force on the machine is zero, so the upward hydraulic force balances the gravitational weight:
Solving for the maximum mass :
Key Pitfall: The mechanical advantage of a hydraulic system scales with the square of the diameter ratio, , not the ratio of the diameters itself. Furthermore, ensure the mechanical advantage of the lever () is multiplied by the hydraulic mechanical advantage () to find the total mechanical advantage ().
Typical errors
01 The student scales the hydraulic force linearly with the diameter ratio rather than squaring it for cross-sectional area.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Pascal's principle equates hydrostatic pressure, . Because the cross-sectional area of a cylinder is proportional to the square of its diameter (), the output force scales with , not .
- Step 3Correct
Your relationship between mass, weight, and force was set up correctly, but the numerical answer inherits the error from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou set up the torque equilibrium equation for the lever accurately.
You calculated the downward force on the input piston correctly as .
You correctly identified the equilibrium condition balancing the hydraulic lift force with the object's gravitational weight.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou forgot to square the diameter ratio when converting the pressure equivalence into a force ratio.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing linear dimensions with cross-sectional area in fluid pressure problems. Pascal's principle transmits pressure uniformly (), meaning force is proportional to area (), which introduces a quadratic dependence on diameter.
REASONING PATH
Your ACEpath teacher’s suggested approach- Pressure Equivalence
Pascal's principle states that , which means .
Always write the relationship in terms of cross-sectional area before substituting radii or diameters.
- Area-to-Diameter Scaling
For circular pistons, , so .
Square the diameter or radius ratio whenever calculating hydraulic mechanical advantage.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the hydraulic mechanical advantage using the ratio of areas: .
Compute the correct output lift force: .
Recalculate the maximum elevated mass: .
02 The student misidentifies the effort lever arm as the remaining distance from the piston to the free end (L - x) instead of the total length from the pivot.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The lever is pivoted at its left hinge. The lever arm for any applied force is measured from the pivot to the point of application, so the effort applied at the rightmost free end has a lever arm of , not .
- Step 2Correct
You correctly set up Pascal's principle using the ratio of cross-sectional areas, but the numerical result is affected by your earlier value of .
- Step 3Correct
You correctly divided the output force by to find the mass, but the final value reflects the propagated error from Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used Pascal's principle by scaling the hydraulic force with the square of the piston diameter ratio .
You correctly applied Newton's second law for constant velocity by balancing the upward hydraulic lift force with the weight .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual misunderstanding of measuring torque lever arms in a class-2 lever.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou measured the effort lever arm relative to the input piston location rather than relative to the actual hinge pivot at the left end .
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Fixed Pivot
Every torque term must measure distance from the chosen axis of rotation (the hinge).
Before writing torque equilibrium, mark the pivot clearly and draw lever-arm dimension arrows originating strictly at that pivot point.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up rotational equilibrium about the hinge:
Substitute the total lever length:
Apply Pascal's principle:
Calculate the elevated mass:
03 The student confuses the mechanical advantage of the lever by dividing by the total length instead of the input arm, treating the input piston as having the longer arm.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Taking torques about the hinge gives . Because the effort is applied at the outer end () and the piston is closer to the hinge (), the lever multiplies force by , rather than reducing it.
- Step 2Correct
Your application of Pascal's principle with the squared diameter ratio is completely correct, but the calculation inherits the incorrect value of from Step 1.
- Step 3Correct
Your division of output force by gravitational acceleration is methodologically sound, but uses the value carried forward from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used Pascal's principle showing that force scales with the square of the cylinder diameter ratio.
You correctly related the output force to the maximum liftable mass using .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou inverted the ratio of lever arms, dividing the short arm by the total length instead of dividing the total length by the short arm.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing input and output lever arms when balancing torques about a pivot, causing a force-multiplying lever to be treated as a force-reducing mechanism.
REASONING PATH
Your ACEpath teacher’s suggested approach- Torque Equilibrium Check
For a lever pivoted at one end: .
Solve explicitly for the unknown force before plugging in numbers: .
- Physical Reality Check
Applying effort at a longer distance from the hinge produces a mechanical advantage greater than .
Verify that the force exerted on the piston closer to the hinge is larger than the applied effort force ().
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the torque balance about the left hinge: .
Apply Pascal's principle using the hydraulic area ratio: .
Solve for the elevated mass: .
Lock it in
How does hydraulic output force relate to input force for circular pistons of diameters and at the same fluid level?
. Force scales with cross-sectional area, which depends on the square of diameter.
Similar question
A hydraulic lift has an input piston of radius and an output piston of radius . What force must be exerted on the input piston to support a load of on the output piston?
Answer
. Pascal's principle gives .
A hydraulic press combines a lever and two cylindrical pistons. The lever provides a mechanical advantage of . The small piston has a diameter of and the large piston has a diameter of . If an effort force of is applied to the end of the lever, find the total compressive force exerted by the large piston.
Answer
. Force on small piston is . Hydraulic advantage is . Total output force is .
A hydraulic lift system is used to elevate a platform holding a vehicle at constant speed. The input cylinder has a diameter of , while the output cylinder has a diameter of . The input cylinder is driven by a hand lever where the input handle is from the hinge, and the piston attaches from the hinge. Taking , determine the effort force required at the handle.
Answer
. Required output force . Hydraulic force ratio is , so force on input piston is . Lever mechanical advantage is . Thus, .