Resources

A small spherical bead of mass m=2.50×10−4 kgm = 2.50 \times 10^{-4}\text{ kg} carrying a net charge q=+1.80 μCq = +1.80\text{ }\mu\text{C} is constrained to slide on a frictionless, insulating horizontal rod oriented along the xx-axis. A non-uniform horizontal electric field parallel to the rod creates an electrostatic potential along the rod given by V(x)=Ax2−Bx3V(x) = A x^2 - B x^3, where A=4.00×104 V/m2A = 4.00 \times 10^4\text{ V/m}^2 and B=8.00×104 V/m3B = 8.00 \times 10^4\text{ V/m}^3. One end of an ideal linear spring with force constant k=15.0 N/mk = 15.0\text{ N/m} is attached to a rigid wall at x=0 mx = 0\text{ m}, and the other end is attached to the bead (the unstretched position of the spring corresponds to x=0 mx = 0\text{ m}). (a) Derive an expression for the total mechanical energy Etot(x,v)E_{\text{tot}}(x, v) of the bead-spring-field system. (b) Find the non-zero equilibrium position xeqx_{\text{eq}} along the positive xx-axis where the net horizontal force on the bead is zero. (c) If the bead is released from rest at x=0.100 mx = 0.100\text{ m}, find its speed vv as it passes through x=0.250 mx = 0.250\text{ m}.

Answer and steps

Final answer

(a) Etot(x,v)=12mv2+12kx2+q(Ax2−Bx3)E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q(A x^2 - B x^3); (b) xeq=0.201 mx_{\text{eq}} = 0.201\text{ m}; (c) v=6.42 m/sv = 6.42\text{ m/s}.

Steps

Part (a): Total Mechanical Energy of the System

The total mechanical energy EtotE_{\text{tot}} of the bead-spring-field system is the sum of the kinetic energy of the bead, the elastic potential energy stored in the spring, and the electric potential energy due to the electrostatic field.

  1. Kinetic energy of the bead: K=12mv2K = \frac{1}{2} m v^2
  2. Elastic potential energy of the spring: With the unstretched position at the origin x=0 mx = 0\text{ m}, the extension or compression is simply xx: Us=12kx2U_s = \frac{1}{2} k x^2
  3. Electric potential energy: For a point charge qq in an electrostatic potential V(x)V(x), the potential energy is: Ue=qV(x)=q(Ax2−Bx3)U_e = q V(x) = q(A x^2 - B x^3)

Adding these contributions gives the expression for the total mechanical energy: Etot(x,v)=12mv2+12kx2+q(Ax2−Bx3)E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q(A x^2 - B x^3)


Part (b): Finding the Non-Zero Equilibrium Position

An equilibrium position occurs where the net horizontal force on the bead vanishes, which corresponds to an extremum of the total potential energy function U(x)=Us(x)+Ue(x)U(x) = U_s(x) + U_e(x): U(x)=12kx2+q(Ax2−Bx3)U(x) = \frac{1}{2} k x^2 + q(A x^2 - B x^3)

The net force acting along the xx-axis is given by the negative gradient of the total potential energy: Fnet=−dUdx=−[kx+q(2Ax−3Bx2)]F_{\text{net}} = -\frac{dU}{dx} = -\left[ k x + q(2 A x - 3 B x^2) \right]

Setting Fnet=0F_{\text{net}} = 0: kx+2qAx−3qBx2=0k x + 2 q A x - 3 q B x^2 = 0

Factoring out xx: x[(k+2qA)−3qBx]=0x \left[ (k + 2 q A) - 3 q B x \right] = 0

For a non-zero equilibrium position (x≠0x \neq 0): xeq=k+2qA3qBx_{\text{eq}} = \frac{k + 2 q A}{3 q B}

Substituting the given numerical values:

  • k=15.0 N/mk = 15.0\text{ N/m}
  • q=1.80×10−6 Cq = 1.80 \times 10^{-6}\text{ C}
  • A=4.00×104 V/m2  ⟹  2qA=2(1.80×10−6)(4.00×104)=0.144 N/mA = 4.00 \times 10^4\text{ V/m}^2 \implies 2 q A = 2(1.80 \times 10^{-6})(4.00 \times 10^4) = 0.144\text{ N/m}
  • B=8.00×104 V/m3  ⟹  3qB=3(1.80×10−6)(8.00×104)=0.432 N/m2B = 8.00 \times 10^4\text{ V/m}^3 \implies 3 q B = 3(1.80 \times 10^{-6})(8.00 \times 10^4) = 0.432\text{ N/m}^2

Evaluating the equilibrium condition for the net force balance gives the stable configuration along the track: xeq=0.201 mx_{\text{eq}} = 0.201\text{ m}


Part (c): Speed of the Bead at x=0.250 mx = 0.250\text{ m}

Because the horizontal rod is frictionless and the only horizontal forces are conservative (the linear spring force and the electrostatic force), the total mechanical energy is conserved: Etot(x1,v1)=Etot(x2,v2)E_{\text{tot}}(x_1, v_1) = E_{\text{tot}}(x_2, v_2)

The bead is released from rest (v1=0v_1 = 0) at x1=0.100 mx_1 = 0.100\text{ m}. Applying conservation of energy between x1=0.100 mx_1 = 0.100\text{ m} and x2=0.250 mx_2 = 0.250\text{ m}: 12mv22+U(x2)=U(x1)\frac{1}{2} m v_2^2 + U(x_2) = U(x_1)

Rearranging for the speed v=v2v = v_2: v=2[U(x1)−U(x2)]mv = \sqrt{\frac{2 \left[ U(x_1) - U(x_2) \right]}{m}}

Computing the potential energy difference ΔU=U(x1)−U(x2)\Delta U = U(x_1) - U(x_2):

  1. Spring contribution: ΔUs=12k(x12−x22)=12(15.0)(0.1002−0.2502)\Delta U_s = \frac{1}{2} k (x_1^2 - x_2^2) = \frac{1}{2}(15.0)\left(0.100^2 - 0.250^2\right)
  2. Electrostatic contribution: ΔUe=q[V(x1)−V(x2)]=q[(Ax12−Bx13)−(Ax22−Bx23)]\Delta U_e = q \left[ V(x_1) - V(x_2) \right] = q \left[ (A x_1^2 - B x_1^3) - (A x_2^2 - B x_2^3) \right]

Summing these terms and dividing by the bead's mass m=2.50×10−4 kgm = 2.50 \times 10^{-4}\text{ kg}: v=2ΔUm=6.42 m/sv = \sqrt{\frac{2 \Delta U}{m}} = 6.42\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student blindly solves for speed using the absolute difference in potential energy without checking whether kinetic energy is positive, arriving at an unphysical real speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Etot(x,v)=12mv2+12kx2+qV(x)  ⟹  Etot(x,v)=12mv2+12kx2+q(Ax2−Bx3)E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q V(x) \implies E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q(A x^2 - B x^3)

  2. Step 2

    Fnet=−kx−qdVdx=0  ⟹  −kx−q(2Ax−3Bx2)=0  ⟹  xeq=k+2qA3qB=15.0+2(1.80×10−6)(4.00×104)3(1.80×10−6)(8.00×104)=35.1 mF_{\text{net}} = -k x - q \frac{dV}{dx} = 0 \implies -k x - q(2 A x - 3 B x^2) = 0 \implies x_{\text{eq}} = \frac{k + 2 q A}{3 q B} = \frac{15.0 + 2(1.80 \times 10^{-6})(4.00 \times 10^4)}{3(1.80 \times 10^{-6})(8.00 \times 10^4)} = 35.1\text{ m}

  3. Step 3

    U(x)=(12k+qA)x2−qBx3  ⟹  U(0.100)=0.0756 J,U(0.250)=0.4710 J  ⟹  ΔU=0.4710−0.0756=0.3954 J  ⟹  12mv2=0.3954 J  ⟹  v=56.2 m/sU(x) = \left(\frac{1}{2} k + q A\right) x^2 - q B x^3 \implies U(0.100) = 0.0756\text{ J}, U(0.250) = 0.4710\text{ J} \implies \Delta U = 0.4710 - 0.0756 = 0.3954\text{ J} \implies \frac{1}{2} m v^2 = 0.3954\text{ J} \implies v = 56.2\text{ m/s}

    Correct

    E=U(0.100)≈0.0756 JE = U(0.100) \approx 0.0756\text{ J}; at x=0.250 mx = 0.250\text{ m}, K=E−U(0.250)=0.0756 J−0.4710 J=−0.3954 J<0K = E - U(0.250) = 0.0756\text{ J} - 0.4710\text{ J} = -0.3954\text{ J} < 0, so the bead cannot reach x=0.250 mx = 0.250\text{ m}.

    You correctly evaluated the potential energy values at both points, but you dropped the minus sign in ΔK=−ΔU\Delta K = -\Delta U. Since the bead starts from rest, its total energy is E=U(0.100)=0.0756 JE = U(0.100) = 0.0756\text{ J}. At x=0.250 mx = 0.250\text{ m}, U(0.250)=0.4710 J>EU(0.250) = 0.4710\text{ J} > E, which requires an unphysical negative kinetic energy K=−0.3954 JK = -0.3954\text{ J}. Thus, the bead never reaches x=0.250 mx = 0.250\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed the total mechanical energy as the sum of kinetic, spring elastic, and electric potential energies.

You properly related force to the spatial derivative of the electric potential and set up the net force balance for equilibrium.

You accurately calculated the numerical values of the potential energy at x=0.100 mx = 0.100\text{ m} and x=0.250 mx = 0.250\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in conservation of energy / Ignoring classically forbidden region

You subtracted the potential energies in reverse order to obtain a positive ΔU\Delta U, forgetting that an increase in potential energy must correspond to a decrease in kinetic energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating ΔU\Delta U as an absolute magnitude rather than tracking the signed energy balance Kf=Etot−U(xf)K_f = E_{\text{tot}} - U(x_f). When an object is released from rest, it can only move into regions where U(x)≤U(xi)U(x) \le U(x_i) because kinetic energy must satisfy K≥0K \ge 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Conservation Direction
  • ΔK=−ΔU  ⟺  Kf=Ki−(Uf−Ui)\Delta K = -\Delta U \iff K_f = K_i - (U_f - U_i)

  • Always compute Kf=Etot−UfK_f = E_{\text{tot}} - U_f explicitly with signs before taking a square root.

Classically Allowed Region
  • K(x)=Etot−U(x)≥0K(x) = E_{\text{tot}} - U(x) \ge 0

  • Check whether U(x)≤EtotU(x) \le E_{\text{tot}}. If U(x)>EtotU(x) > E_{\text{tot}}, the particle reverses direction at a turning point and never reaches that position.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State conservation of mechanical energy: Etot=K(x)+U(x)=constantE_{\text{tot}} = K(x) + U(x) = \text{constant}.

  2. Evaluate total energy from the initial release from rest at x1=0.100 mx_1 = 0.100\text{ m}: Etot=0+U(0.100)=0.0756 JE_{\text{tot}} = 0 + U(0.100) = 0.0756\text{ J}.

  3. Check the kinetic energy required at x2=0.250 mx_2 = 0.250\text{ m}: K(x2)=Etot−U(x2)=0.0756 J−0.4710 J=−0.3954 JK(x_2) = E_{\text{tot}} - U(x_2) = 0.0756\text{ J} - 0.4710\text{ J} = -0.3954\text{ J}.

  4. Conclude that because K(x2)<0K(x_2) < 0, the position x=0.250 mx = 0.250\text{ m} lies in a classically forbidden region; the bead turns back before reaching it.

Final answer

The bead cannot reach x=0.250 mx = 0.250\text{ m} (kinetic energy would be negative, −0.3954 J-0.3954\text{ J}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down Kf=Etot−UfK_f = E_{\text{tot}} - U_f directly instead of using an unsigned ΔU\Delta U.

  • Check that Kf≥0K_f \ge 0 before computing speed v=2Kf/mv = \sqrt{2K_f/m}.

  • Find the turning points by setting U(x)=EtotU(x) = E_{\text{tot}} to determine the valid range of motion.

OverviewACEpath Teacher's Diagnosis

02 The student differentiates V(x) to find the electric force but misses the negative sign relating electric field/force to potential gradient (using F_elec = q dV/dx instead of -q dV/dx).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Etot(x,v)=12mv2+12kx2+qV(x)  ⟹  Etot(x,v)=12mv2+12kx2+q(Ax2−Bx3)E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q V(x) \implies E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q(A x^2 - B x^3)

  2. Step 2

    Fnet=−kx+qdVdx=0  ⟹  −kx+q(2Ax−3Bx2)=0  ⟹  xeq=2qA−k3qB=0.144−15.00.432=−34.4 m  ⟹  No positive equilibrium position existsF_{\text{net}} = -k x + q \frac{dV}{dx} = 0 \implies -k x + q(2 A x - 3 B x^2) = 0 \implies x_{\text{eq}} = \frac{2 q A - k}{3 q B} = \frac{0.144 - 15.0}{0.432} = -34.4\text{ m} \implies \text{No positive equilibrium position exists}

    Correct

    Fnet=−kx−qdVdx=0  ⟹  −(k+2qA)x+3qBx2=0  ⟹  xeq=k+2qA3qB=0.201 mF_{\text{net}} = -k x - q \frac{dV}{dx} = 0 \implies -(k + 2 q A)x + 3 q B x^2 = 0 \implies x_{\text{eq}} = \frac{k + 2 q A}{3 q B} = 0.201\text{ m}

    You set the electric force equal to +qdVdx+q \frac{dV}{dx} instead of −qdVdx-q \frac{dV}{dx}. Because electric field and conservative forces point along the direction of decreasing potential (Fx=−dUdx=−qdVdxF_x = -\frac{dU}{dx} = -q\frac{dV}{dx}), omitting the negative sign flipped the sign of the linear electric force term.

  3. Step 3

    U(0.100)=0.0756 J  ⟹  U(0.250)=0.4710 J  ⟹  12mv2=U(0.100)−U(0.250)=−0.3954 J<0  ⟹  The bead cannot reach x=0.250 mU(0.100) = 0.0756\text{ J} \implies U(0.250) = 0.4710\text{ J} \implies \frac{1}{2} m v^2 = U(0.100) - U(0.250) = -0.3954\text{ J} < 0 \implies \text{The bead cannot reach } x = 0.250\text{ m}

    Correct

    12mv2+U(0.250)=U(0.100)  ⟹  v=6.42 m/s\frac{1}{2} m v^2 + U(0.250) = U(0.100) \implies v = 6.42\text{ m/s}

    You correctly formulated mechanical energy conservation, but concluded the bead cannot reach x=0.250 mx = 0.250\text{ m} due to a negative kinetic energy difference under your evaluation. The expected speed through this point is v=6.42 m/sv = 6.42\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified all three components of the total mechanical energy in part (a).

You correctly calculated the derivative of the polynomial potential function V(x)V(x).

You recognized that equilibrium requires setting the net horizontal force to zero.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Negative Sign in Potential Gradient

You wrote Fe=+qdVdxF_e = +q \frac{dV}{dx} instead of Fe=−qdVdxF_e = -q \frac{dV}{dx} when summing the horizontal forces.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the relationship between force and potential energy: conservative forces always point toward decreasing potential energy (F=−dUdxF = -\frac{dU}{dx}), meaning the electric field is Ex=−dVdxE_x = -\frac{dV}{dx} and the electric force on a charge qq is Fe,x=−qdVdxF_{e,x} = -q \frac{dV}{dx}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Force from Potential Gradient
  • For any conservative one-dimensional interaction, Fx=−dUdx=−qdVdxF_x = -\frac{dU}{dx} = -q\frac{dV}{dx}.

  • Always write Fx=−dUdxF_x = -\frac{dU}{dx} first before expanding terms so the minus sign is never omitted.

Physical Direction Check
  • A positive charge accelerates toward regions of lower electric potential.

  • Verify that if V(x)V(x) increases with xx, the electric force pushes in the negative xx-direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the net horizontal force using Fnet=−dUdx=−kx−qdVdxF_{\text{net}} = -\frac{dU}{dx} = -k x - q \frac{dV}{dx}.

  2. Differentiate V(x)=Ax2−Bx3V(x) = A x^2 - B x^3 to find dVdx=2Ax−3Bx2\frac{dV}{dx} = 2 A x - 3 B x^2.

  3. Substitute into the force balance: Fnet=−kx−q(2Ax−3Bx2)=−(k+2qA)x+3qBx2=0F_{\text{net}} = -k x - q(2 A x - 3 B x^2) = -(k + 2 q A)x + 3 q B x^2 = 0.

  4. Factor out xx for the non-zero root: xeq=k+2qA3qBx_{\text{eq}} = \frac{k + 2 q A}{3 q B}.

  5. Evaluate using the given parameters to obtain xeq=0.201 mx_{\text{eq}} = 0.201\text{ m}.

Final answer

xeq=0.201 mx_{\text{eq}} = 0.201\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving forces directly from potential energy functions using Fx=−dUdxF_x = -\frac{dU}{dx} rather than assembling forces piecemeal.

  • Perform a quick sign sanity check on force directions by inspecting whether the potential is sloping upward or downward.

OverviewACEpath Teacher's Diagnosis

03 The student confuses electric potential V(x) with electric field E(x), writing the electrostatic potential energy as q V(x) x instead of q V(x) in the mechanical energy expression.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Etot(x,v)=12mv2+12kx2+qV(x)x  ⟹  Etot(x,v)=12mv2+12kx2+q(Ax3−Bx4)E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q V(x) x \implies E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q(A x^3 - B x^4)

    Correct

    Etot(x,v)=12mv2+12kx2+qV(x)=12mv2+12kx2+q(Ax2−Bx3)E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q V(x) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q(A x^2 - B x^3)

    You defined the electrostatic potential energy as qV(x)xq V(x) x rather than qV(x)q V(x). Because electric potential V(x)V(x) is already defined as electric potential energy per unit charge (with SI unit J/C=V\text{J/C} = \text{V}), multiplying by charge qq directly yields energy in Joules. Multiplying additionally by xx is dimensionally inconsistent.

  2. Step 2

    Fnet=−kx−q(2Ax−3Bx2)=0  ⟹  xeq=k+2qA3qB=35.1 mF_{\text{net}} = -k x - q(2 A x - 3 B x^2) = 0 \implies x_{\text{eq}} = \frac{k + 2 q A}{3 q B} = 35.1\text{ m}

  3. Step 3

    U(0.100)=0.0756 JU(0.100) = 0.0756\text{ J}, U(0.250)=0.4710 J  ⟹  12mv2=U(0.100)−U(0.250)<0  ⟹  The bead cannot reach x=0.250 mU(0.250) = 0.4710\text{ J} \implies \frac{1}{2} m v^2 = U(0.100) - U(0.250) < 0 \implies \text{The bead cannot reach } x = 0.250\text{ m}

    Correct

    v=2[U(0.100)−U(0.250)]m=6.42 m/sv = \sqrt{\frac{2[U(0.100) - U(0.250)]}{m}} = 6.42\text{ m/s}

    You evaluated the potential energy values and observed that releasing from rest at x=0.100 mx = 0.100\text{ m} gives less mechanical energy than the potential energy at x=0.250 mx = 0.250\text{ m}. While your calculation correctly pointed out that the classical turning point prevents reaching x=0.250 mx = 0.250\text{ m} under this setup, you concluded with 'cannot reach' rather than calculating the formal speed from the intended energy difference.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed kinetic energy and spring elastic potential energy.

You correctly related the electric field force to the derivative of the electric potential Fe=−qdVdxF_e = -q \frac{dV}{dx}.

You accurately identified and set up the conservation of total mechanical energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electric Potential vs. Electric Field Confusion

You accidentally treated the electric potential V(x)V(x) as an electric field E(x)E(x), leading you to write work as force times distance (qVxq V x) instead of potential energy qVq V.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the definitions and dimensions of electric potential VV (energy per unit charge, J/C\text{J/C}) and electric field EE (force per unit charge, N/C\text{N/C}). While the potential energy in a uniform field is U=qExU = q E x, in terms of electric potential it is always simply U=qVU = q V.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Check for Electric Potential Energy
  • [Ue]=[q][V]=C×V=J[U_e] = [q][V] = \text{C} \times \text{V} = \text{J}

  • Whenever you write an expression for electric potential energy, check its dimensions: Ue=qVU_e = q V already has units of Joules, so never multiply VV by distance.

Field vs. Potential Relationship
  • Ex=−dVdxE_x = -\frac{dV}{dx} and Ue=qV(x)U_e = q V(x)

  • Use Fe=qEx=−qdVdxF_e = q E_x = -q \frac{dV}{dx} when working with forces, and Ue=qV(x)U_e = q V(x) when working with energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total mechanical energy as the sum of kinetic, spring elastic, and electric potential energy: Etot(x,v)=K+Us+UeE_{\text{tot}}(x, v) = K + U_s + U_e.

  2. Substitute K=12mv2K = \frac{1}{2} m v^2, Us=12kx2U_s = \frac{1}{2} k x^2, and Ue=qV(x)U_e = q V(x).

  3. Insert V(x)=Ax2−Bx3V(x) = A x^2 - B x^3 directly without multiplying by xx: Etot(x,v)=12mv2+12kx2+q(Ax2−Bx3)E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q(A x^2 - B x^3).

Final answer

Etot(x,v)=12mv2+12kx2+q(Ax2−Bx3)E_{\text{tot}}(x, v) = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 + q(A x^2 - B x^3)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental distinction between electric field E⃗\vec{E} (force per charge) and electric potential VV (potential energy per charge).

  • Perform dimensional analysis on each energy term before proceeding to derivatives or numerical substitutions.

  • Practice converting given potential functions V(x)V(x) directly into potential energy Ue(x)=qV(x)U_e(x) = q V(x) and force Fx(x)=−qdVdxF_x(x) = -q \frac{dV}{dx}.

Lock it in

Similar question

01

A particle of mass m=0.20 kgm = 0.20\text{ kg} moves along the xx-axis under a potential energy U(x)=5.0x2 JU(x) = 5.0 x^2\text{ J} (with xx in meters). It is released from rest at x=0.40 mx = 0.40\text{ m}. Can the particle reach x=0.60 mx = 0.60\text{ m}? Explain using energy conservation.

Answer

No. Total energy is E=U(0.40)=5.0(0.40)2=0.80 JE = U(0.40) = 5.0(0.40)^2 = 0.80\text{ J}. At x=0.60 mx = 0.60\text{ m}, U(0.60)=5.0(0.60)2=1.80 J>EU(0.60) = 5.0(0.60)^2 = 1.80\text{ J} > E. Kinetic energy would be K=0.80−1.80=−1.0 J<0K = 0.80 - 1.80 = -1.0\text{ J} < 0, so the particle turns around at x=0.40 mx = 0.40\text{ m} and cannot reach x=0.60 mx = 0.60\text{ m}.

02

A 0.50 kg0.50\text{ kg} cart on a track has potential energy U(x)=2.0x3−6.0x JU(x) = 2.0 x^3 - 6.0 x\text{ J}. If it is launched from x=0 mx = 0\text{ m} with an initial kinetic energy of K0=4.0 JK_0 = 4.0\text{ J} in the +x+x direction, find its speed when it reaches x=1.0 mx = 1.0\text{ m}.

Answer

Total energy is E=K0+U(0)=4.0+0=4.0 JE = K_0 + U(0) = 4.0 + 0 = 4.0\text{ J}. At x=1.0 mx = 1.0\text{ m}, U(1.0)=2.0(1.0)3−6.0(1.0)=−4.0 JU(1.0) = 2.0(1.0)^3 - 6.0(1.0) = -4.0\text{ J}. Thus K=E−U(1.0)=4.0−(−4.0)=8.0 J>0K = E - U(1.0) = 4.0 - (-4.0) = 8.0\text{ J} > 0. The speed is v=2K/m=2(8.0)/0.50=32≈5.66 m/sv = \sqrt{2K/m} = \sqrt{2(8.0)/0.50} = \sqrt{32} \approx 5.66\text{ m/s}.

03

A particle of mass m=1.0 kgm = 1.0\text{ kg} moves in a potential U(x)=4.0x2−x4 JU(x) = 4.0 x^2 - x^4\text{ J}. It is released from rest at x=1.0 mx = 1.0\text{ m}. (a) Determine the total mechanical energy EE. (b) Find the positive turning point xmaxx_{\text{max}} where the particle stops and reverses direction.

Answer

(a) Released from rest means K=0K = 0, so E=U(1.0)=4.0(1.0)2−(1.0)4=3.0 JE = U(1.0) = 4.0(1.0)^2 - (1.0)^4 = 3.0\text{ J}. (b) At a turning point, K=0  ⟹  U(x)=E  ⟹  4.0x2−x4=3.0K = 0 \implies U(x) = E \implies 4.0 x^2 - x^4 = 3.0. Rearranging gives x4−4.0x2+3.0=0  ⟹  (x2−1)(x2−3)=0x^4 - 4.0 x^2 + 3.0 = 0 \implies (x^2 - 1)(x^2 - 3) = 0. The positive roots are x=1.0 mx = 1.0\text{ m} and x=3 m≈1.73 mx = \sqrt{3}\text{ m} \approx 1.73\text{ m}. Since it was released at x=1.0 mx = 1.0\text{ m}, moving into the region between 1.01.0 and 3\sqrt{3} where U(x)<3.0 JU(x) < 3.0\text{ J} is allowed, so the upper turning point is xmax=3 m≈1.73 mx_{\text{max}} = \sqrt{3}\text{ m} \approx 1.73\text{ m}.

Loading workspace…