Resources

A direct-current power supply with fixed open-circuit voltage E=60.0 V\mathcal{E} = 60.0\ \text{V} and constant internal resistance r=15.0 Ωr = 15.0\ \Omega is connected across a variable load resistor RLR_L. (a) Express the electrical power PLP_L dissipated in the load resistor as an explicit function of RLR_L, and determine the limiting value of PLP_L as RL→0 ΩR_L \to 0\ \Omega and as RL→∞R_L \to \infty. (b) By calculus or the maximum power transfer theorem, determine the value of RLR_L that maximizes PLP_L, and compute this maximum power PL,max⁡P_{L,\max}.

Answer and steps

Final answer

(a) PL(RL)=E2RL(RL+r)2P_L(R_L) = \frac{\mathcal{E}^2 R_L}{(R_L + r)^2}; as RL→0R_L \to 0, PL→0 WP_L \to 0\ \text{W}, and as RL→∞R_L \to \infty, PL→0 WP_L \to 0\ \text{W}; (b) RL=15.0 ΩR_L = 15.0\ \Omega, PL,max⁡=60.0 WP_{L,\max} = 60.0\ \text{W}

Steps

Part (a): Expressing Load Power as a Function of Load Resistance

  1. Find the total circuit current:
    The real DC source consists of an ideal electromotive force E\mathcal{E} in series with its internal resistance rr. When connected to a load resistor RLR_L, the total equivalent resistance of the single-loop series circuit is: Rtotal=RL+rR_{\text{total}} = R_L + r By Ohm's law, the current II flowing through the circuit is: I=ERL+rI = \frac{\mathcal{E}}{R_L + r}
  2. Formulate the power dissipated in the load resistor:
    The electrical power PLP_L dissipated in the load resistor is given by Joule's law, PL=I2RLP_L = I^2 R_L: PL(RL)=(ERL+r)2RL=E2RL(RL+r)2P_L(R_L) = \left(\frac{\mathcal{E}}{R_L + r}\right)^2 R_L = \frac{\mathcal{E}^2 R_L}{(R_L + r)^2}
  3. Evaluate the limiting cases:

    • Short-circuit limit (RL→0 ΩR_L \to 0\ \Omega):
      As RL→0R_L \to 0, the numerator approaches 00 while the denominator approaches r2≠0r^2 \neq 0: lim⁡RL→0PL=E2⋅0(0+r)2=0 W\lim_{R_L \to 0} P_L = \frac{\mathcal{E}^2 \cdot 0}{(0 + r)^2} = 0\ \text{W} Physical interpretation: Although the current reaches its maximum value (Isc=E/rI_{\text{sc}} = \mathcal{E}/r), no voltage drop develops across a zero-resistance load, so no power is dissipated in it.
    • Open-circuit limit (RL→∞R_L \to \infty):
      Dividing both numerator and denominator by RLR_L: PL=E2RL+2r+r2RLP_L = \frac{\mathcal{E}^2}{R_L + 2r + \frac{r^2}{R_L}} As RL→∞R_L \to \infty, the denominator grows without bound, leading to: lim⁡RL→∞PL=0 W\lim_{R_L \to \infty} P_L = 0\ \text{W} Physical interpretation: Although the terminal voltage approaches the open-circuit voltage E\mathcal{E}, the current drops to zero, resulting in zero power.

Part (b): Finding the Condition for Maximum Power Transfer

  1. Differentiate PLP_L with respect to RLR_L:
    Applying the quotient rule to PL(RL)=E2RL(RL+r)2P_L(R_L) = \mathcal{E}^2 \frac{R_L}{(R_L + r)^2}: dPLdRL=E2⋅(RL+r)2⋅1−RL⋅2(RL+r)(RL+r)4\frac{dP_L}{dR_L} = \mathcal{E}^2 \cdot \frac{(R_L + r)^2 \cdot 1 - R_L \cdot 2(R_L + r)}{(R_L + r)^4} Factor out (RL+r)(R_L + r) from the numerator: dPLdRL=E2⋅(RL+r)−2RL(RL+r)3=E2⋅r−RL(RL+r)3\frac{dP_L}{dR_L} = \mathcal{E}^2 \cdot \frac{(R_L + r) - 2R_L}{(R_L + r)^3} = \mathcal{E}^2 \cdot \frac{r - R_L}{(R_L + r)^3}
  2. Set the derivative to zero to find the critical point: E2⋅r−RL(RL+r)3=0  ⟹  r−RL=0  ⟹  RL=r\mathcal{E}^2 \cdot \frac{r - R_L}{(R_L + r)^3} = 0 \implies r - R_L = 0 \implies R_L = r Because dPLdRL>0\frac{dP_L}{dR_L} > 0 for RL<rR_L < r and dPLdRL<0\frac{dP_L}{dR_L} < 0 for RL>rR_L > r, this critical point is a global maximum. This confirms the Maximum Power Transfer Theorem, which states that maximum power is transferred from a source to a resistive load when the load resistance equals the internal resistance of the source: RL=r=15.0 ΩR_L = r = 15.0\ \Omega
  3. Compute the maximum power PL,max⁡P_{L,\max}:
    Substitute RL=rR_L = r into the power expression: PL,max⁡=E2r(r+r)2=E2r4r2=E24rP_{L,\max} = \frac{\mathcal{E}^2 r}{(r + r)^2} = \frac{\mathcal{E}^2 r}{4r^2} = \frac{\mathcal{E}^2}{4r} Substituting the given values E=60.0 V\mathcal{E} = 60.0\ \text{V} and r=15.0 Ωr = 15.0\ \Omega: PL,max⁡=(60.0 V)24⋅15.0 Ω=360060.0=60.0 WP_{L,\max} = \frac{(60.0\ \text{V})^2}{4 \cdot 15.0\ \Omega} = \frac{3600}{60.0} = 60.0\ \text{W}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the denominator when substituting current into the power formula, deriving an incorrect linear power function.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    I=Er+RLI = \frac{\mathcal{E}}{r + R_L}

  2. Step 2

    PL=I2RL=E2RLr+RL  ⟹  PL=3600RL15.0+RLP_L = I^2 R_L = \frac{\mathcal{E}^2 R_L}{r + R_L} \implies P_L = \frac{3600 R_L}{15.0 + R_L}

    Correct

    PL=I2RL=(Er+RL)2RL=E2RL(r+RL)2P_L = I^2 R_L = \left(\frac{\mathcal{E}}{r + R_L}\right)^2 R_L = \frac{\mathcal{E}^2 R_L}{(r + R_L)^2}

    When computing I2=(Er+RL)2I^2 = \left(\frac{\mathcal{E}}{r + R_L}\right)^2, you squared the numerator E\mathcal{E} to get E2\mathcal{E}^2, but you did not square the denominator (r+RL)(r + R_L).

  3. Step 3

    As RL→0 Ω, PL→0 W  ⟹  As RL→∞, PL→3600 W\text{As } R_L \to 0\ \Omega,\ P_L \to 0\ \text{W} \implies \text{As } R_L \to \infty,\ P_L \to 3600\ \text{W}

    Correct

    lim⁡RL→0PL=0 W  ⟹  lim⁡RL→∞PL=0 W\lim_{R_L \to 0} P_L = 0\ \text{W} \implies \lim_{R_L \to \infty} P_L = 0\ \text{W}

    Because your denominator was linear in RLR_L instead of quadratic, the limit as RL→∞R_L \to \infty evaluated to 3600 W3600\ \text{W} rather than dropping to 0 W0\ \text{W} as the circuit current vanishes.

  4. Step 4

    dPLdRL=3600(15.0)(15.0+RL)2>0  ⟹  PL,max⁡=3600 W as RL→∞\frac{d P_L}{d R_L} = \frac{3600(15.0)}{(15.0 + R_L)^2} > 0 \implies P_{L,\max} = 3600\ \text{W}\text{ as } R_L \to \infty

    Correct

    dPLdRL=E2r−RL(r+RL)3=0  ⟹  RL=r=15.0 Ω, PL,max⁡=60.0 W\frac{d P_L}{d R_L} = \mathcal{E}^2 \frac{r - R_L}{(r + R_L)^3} = 0 \implies R_L = r = 15.0\ \Omega,\ P_{L,\max} = 60.0\ \text{W}

    Your derivative and conclusion were affected by the missing exponent in the load power formula, making the function appear strictly increasing instead of reaching a peak at RL=rR_L = r.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the source and load resistors form a series circuit.

You correctly formulated the loop current as I=Er+RLI = \frac{\mathcal{E}}{r + R_L}.

You used the correct relationship PL=I2RLP_L = I^2 R_L to connect current, load resistance, and power.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic Exponent Distribution

You squared the numerator when substituting I=Er+RLI = \frac{\mathcal{E}}{r + R_L} into I2I^2, but left the denominator as (r+RL)(r + R_L) instead of (r+RL)2(r + R_L)^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete distribution of powers over a quotient: when squaring a rational expression (AB)2\left(\frac{A}{B}\right)^2, both numerator and denominator must be raised to the power, yielding A2B2\frac{A^2}{B^2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Squaring a fraction
  • For any non-zero fraction, (AB)n=AnBn\left(\frac{A}{B}\right)^n = \frac{A^n}{B^n}.

  • Always write explicit parentheses around the substituted current before expanding: (Er+RL)2RL=E2(r+RL)2RL\left(\frac{\mathcal{E}}{r + R_L}\right)^2 R_L = \frac{\mathcal{E}^2}{(r + R_L)^2} R_L.

Physical limiting behavior check
  • As RL→∞R_L \to \infty, the total resistance grows infinite and circuit current I→0I \to 0, so load power PL=I2RLP_L = I^2 R_L must approach 0 W0\ \text{W}.

  • Check your algebraic power function against physical extremes: if RL→∞R_L \to \infty yields a non-zero power when I→0I \to 0, re-verify the powers in your formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute I=Er+RLI = \frac{\mathcal{E}}{r + R_L} into PL=I2RLP_L = I^2 R_L with full parentheses: PL(RL)=(60.015.0+RL)2RL=3600RL(15.0+RL)2P_L(R_L) = \left(\frac{60.0}{15.0 + R_L}\right)^2 R_L = \frac{3600 R_L}{(15.0 + R_L)^2}.

  2. Evaluate limits: as RL→0R_L \to 0, PL→0(15.0)2=0 WP_L \to \frac{0}{(15.0)^2} = 0\ \text{W}; as RL→∞R_L \to \infty, PL=3600RL+30.0+225RL→0 WP_L = \frac{3600}{R_L + 30.0 + \frac{225}{R_L}} \to 0\ \text{W}.

  3. Differentiate with respect to RLR_L: dPLdRL=3600⋅(15.0+RL)2−2RL(15.0+RL)(15.0+RL)4=3600⋅15.0−RL(15.0+RL)3\frac{dP_L}{dR_L} = 3600 \cdot \frac{(15.0 + R_L)^2 - 2 R_L (15.0 + R_L)}{(15.0 + R_L)^4} = 3600 \cdot \frac{15.0 - R_L}{(15.0 + R_L)^3}.

  4. Set dPLdRL=0\frac{dP_L}{dR_L} = 0, giving 15.0−RL=0  ⟹  RL=15.0 Ω15.0 - R_L = 0 \implies R_L = 15.0\ \Omega.

  5. Compute the maximum power: PL,max⁡=3600(15.0)(15.0+15.0)2=54000900=60.0 WP_{L,\max} = \frac{3600(15.0)}{(15.0 + 15.0)^2} = \frac{54000}{900} = 60.0\ \text{W}.

Final answer

(a) PL(RL)=E2RL(RL+r)2P_L(R_L) = \frac{\mathcal{E}^2 R_L}{(R_L + r)^2}; as RL→0R_L \to 0, PL→0 WP_L \to 0\ \text{W}; as RL→∞R_L \to \infty, PL→0 WP_L \to 0\ \text{W}; (b) RL=15.0 ΩR_L = 15.0\ \Omega, PL,max⁡=60.0 WP_{L,\max} = 60.0\ \text{W}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice squaring algebraic quotients with grouped denominators by writing parentheses first.

  • Use physical boundary conditions (I→0I \to 0 when RL→∞R_L \to \infty) to sanity-check your power expressions.

  • Review the Maximum Power Transfer Theorem condition (RL=RthR_L = R_{\text{th}}) as a quick reference check for resistive DC circuits.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the internal resistance when expressing the voltage across the load resistor, assuming terminal voltage equals the open-circuit voltage.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    VL=E=60.0 V  ⟹  PL=VL2RL=3600RLV_L = \mathcal{E} = 60.0\text{ V} \implies P_L = \frac{V_L^2}{R_L} = \frac{3600}{R_L}

    Correct

    I=ERL+r  ⟹  PL(RL)=I2RL=E2RL(RL+r)2=3600RL(RL+15.0)2I = \frac{\mathcal{E}}{R_L + r} \implies P_L(R_L) = I^2 R_L = \frac{\mathcal{E}^2 R_L}{(R_L + r)^2} = \frac{3600 R_L}{(R_L + 15.0)^2}

    You omitted the internal resistance r=15.0 Ωr = 15.0\ \Omega when writing the load voltage. In a real power supply, the current must flow through both rr and RLR_L in series, so terminal voltage is VL=E−Ir=ERLRL+rV_L = \mathcal{E} - I r = \frac{\mathcal{E} R_L}{R_L + r}, not a constant E\mathcal{E}.

  2. Step 2

    As RL→0 Ω, PL→∞ W;As RL→∞, PL→0 W\text{As } R_L \to 0\ \Omega,\ P_L \to \infty\text{ W};\quad \text{As } R_L \to \infty,\ P_L \to 0\text{ W}

    Correct

    lim⁡RL→0PL(RL)=0 W;lim⁡RL→∞PL(RL)=0 W\lim_{R_L \to 0} P_L(R_L) = 0\text{ W};\quad \lim_{R_L \to \infty} P_L(R_L) = 0\text{ W}

    Evaluating your expression 3600RL\frac{3600}{R_L} correctly yielded ∞ W\infty\text{ W} and 0 W0\text{ W}, but the short-circuit limit is physically incorrect because the true power expression has RLR_L in the numerator, giving lim⁡RL→0PL=0 W\lim_{R_L \to 0} P_L = 0\text{ W}.

  3. Step 3

    dPLdRL=−3600RL2<0  ⟹  PL is maximized as RL→0 Ω\frac{dP_L}{dR_L} = -\frac{3600}{R_L^2} < 0 \implies P_L\text{ is maximized as } R_L \to 0\ \Omega

    Correct

    dPLdRL=E2r−RL(RL+r)3=0  ⟹  RL=r=15.0 Ω\frac{dP_L}{dR_L} = \mathcal{E}^2 \frac{r - R_L}{(R_L + r)^3} = 0 \implies R_L = r = 15.0\ \Omega

    Your derivative calculation followed correctly from your formula 3600RL\frac{3600}{R_L}, but differentiating the correct quotient E2RL(RL+r)2\frac{\mathcal{E}^2 R_L}{(R_L + r)^2} reveals a stationary point where RL=rR_L = r.

  4. Step 4

    RL=0 Ω, PL,max⁡=∞ WR_L = 0\ \Omega,\ P_{L,\max} = \infty\text{ W}

    Correct

    RL=15.0 Ω, PL,max⁡=60.0 WR_L = 15.0\ \Omega,\ P_{L,\max} = 60.0\text{ W}

    This result stems from the initial omission of internal resistance. When matched to RL=15.0 ΩR_L = 15.0\ \Omega, the maximum achievable power is PL,max⁡=E24r=60.0 WP_{L,\max} = \frac{\mathcal{E}^2}{4r} = 60.0\text{ W}.

WHAT YOU DID WELL
Compliments from Your Teacher

You remembered the relationship P=V2RP = \frac{V^2}{R} connecting power, potential difference, and resistance.

You used calculus to differentiate your derived power function with respect to RLR_L to search for an extremum.

You analyzed both asymptotic limits as RLR_L approaches zero and infinity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignored internal resistance of power source

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated a non-ideal power source as an ideal voltage source, setting terminal voltage equal to open-circuit electromotive force (VL=EV_L = \mathcal{E}) regardless of load current.

REASONING PATH
Your ACEpath teacher’s suggested approach
Model Real Sources as Series Elements
  • A real DC source with open-circuit EMF E\mathcal{E} and internal resistance rr supplies current I=ERL+rI = \frac{\mathcal{E}}{R_L + r} to an external load.

  • Always draw or write rr in series with the load RLR_L before finding voltages or currents.

Terminal Voltage Depends on Current
  • The terminal voltage across the load is VL=E−Ir=IRL=ERLRL+rV_L = \mathcal{E} - I r = I R_L = \mathcal{E} \frac{R_L}{R_L + r}.

  • Never set load voltage equal to E\mathcal{E} unless the problem explicitly states the internal resistance is zero or negligible.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find total circuit current using both resistors: I=ERL+r=60.0RL+15.0I = \frac{\mathcal{E}}{R_L + r} = \frac{60.0}{R_L + 15.0}.

  2. Write load power using Joule's law: PL=I2RL=60.02RL(RL+15.0)2=3600RL(RL+15.0)2P_L = I^2 R_L = \frac{60.0^2 R_L}{(R_L + 15.0)^2} = \frac{3600 R_L}{(R_L + 15.0)^2}.

  3. Evaluate limits: as RL→0R_L \to 0, PL→015.02=0 WP_L \to \frac{0}{15.0^2} = 0\text{ W}; as RL→∞R_L \to \infty, divide by RLR_L to see PL→0 WP_L \to 0\text{ W}.

  4. Differentiate with respect to RLR_L: dPLdRL=3600⋅(RL+15.0)−2RL(RL+15.0)3=3600⋅15.0−RL(RL+15.0)3\frac{dP_L}{dR_L} = 3600 \cdot \frac{(R_L + 15.0) - 2R_L}{(R_L + 15.0)^3} = 3600 \cdot \frac{15.0 - R_L}{(R_L + 15.0)^3}.

  5. Set derivative to zero: 15.0−RL=0  ⟹  RL=15.0 Ω15.0 - R_L = 0 \implies R_L = 15.0\ \Omega.

  6. Calculate peak power: PL,max⁡=3600(15.0)(15.0+15.0)2=54000900=60.0 WP_{L,\max} = \frac{3600(15.0)}{(15.0 + 15.0)^2} = \frac{54000}{900} = 60.0\text{ W}.

Final answer

(a) PL(RL)=E2RL(RL+r)2P_L(R_L) = \frac{\mathcal{E}^2 R_L}{(R_L + r)^2}; as RL→0R_L \to 0, PL→0 WP_L \to 0\text{ W}; as RL→∞R_L \to \infty, PL→0 WP_L \to 0\text{ W}; (b) RL=15.0 ΩR_L = 15.0\ \Omega, PL,max⁡=60.0 WP_{L,\max} = 60.0\text{ W}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing an equivalent single-loop circuit showing internal resistance rr explicitly in series with the load resistor RLR_L.

  • Review the Maximum Power Transfer Theorem: a resistive load absorbs maximum power from a source when its resistance equals the source internal resistance (RL=rR_L = r).

  • Verify limiting physical conditions: when RL=0 ΩR_L = 0\ \Omega (short circuit), VL=0 VV_L = 0\text{ V}, so power dissipated in the external load must be zero.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the maximum power transfer condition as R_L = 2r or confuses the total resistance with the load resistance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    I=60.015.0+RL  ⟹  PL=I2RL=3600RL(15.0+RL)2I = \frac{60.0}{15.0 + R_L} \implies P_L = I^2 R_L = \frac{3600 R_L}{(15.0 + R_L)^2}

  2. Step 2

    As RL→0 Ω, PL→0 W  ⟹  As RL→∞, PL→0 W\text{As } R_L \to 0\ \Omega,\ P_L \to 0\ \text{W} \implies \text{As } R_L \to \infty,\ P_L \to 0\ \text{W}

  3. Step 3

    For maximum power transfer, RL=2r  ⟹  RL=2×15.0=30.0 Ω\text{For maximum power transfer, } R_L = 2r \implies R_L = 2 \times 15.0 = 30.0\ \Omega

    Correct

    For maximum power transfer, RL=r  ⟹  RL=15.0 Ω\text{For maximum power transfer, } R_L = r \implies R_L = 15.0\ \Omega

    According to the maximum power transfer theorem (or by setting dPLdRL=0\frac{dP_L}{dR_L} = 0), maximum power transfer occurs when the load resistance equals the internal resistance (RL=rR_L = r), not double the internal resistance.

  4. Step 4

    PL,max⁡=3600(30.0)(15.0+30.0)2=1080002025=53.3 WP_{L,\max} = \frac{3600 (30.0)}{(15.0 + 30.0)^2} = \frac{108000}{2025} = 53.3\ \text{W}

    Correct

    PL,max⁡=3600(15.0)(15.0+15.0)2=E24r=60.0 WP_{L,\max} = \frac{3600 (15.0)}{(15.0 + 15.0)^2} = \frac{\mathcal{E}^2}{4r} = 60.0\ \text{W}

    You evaluated your formula correctly for your value of RLR_L, but the resulting power is incorrect because it relied on the erroneous condition RL=30.0 ΩR_L = 30.0\ \Omega.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Ohm's law to express the single-loop current II.

You accurately substituted current into Joule's power formula PL=I2RLP_L = I^2 R_L.

You correctly identified that load power approaches zero at both extreme limits of load resistance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misremembered Maximum Power Transfer Condition

You set RL=2rR_L = 2r rather than matching the load resistance directly to the internal resistance RL=rR_L = r.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You may have conflated the total series resistance of the circuit at peak power (Rtotal=RL+r=2rR_{\text{total}} = R_L + r = 2r) with the value of the load resistor itself (RL=rR_L = r).

REASONING PATH
Your ACEpath teacher’s suggested approach
Maximum Power Transfer Theorem
  • For a real DC voltage source with fixed internal resistance rr, the power delivered to a variable resistive load RLR_L is maximized when RL=rR_L = r.

  • Always set the variable load resistance equal to the source's internal resistance: RL=rR_L = r. Notice that the total circuit resistance becomes Rtotal=2rR_{\text{total}} = 2r, but the load resistance itself is rr.

Maximum Power Formula
  • Substituting RL=rR_L = r into PL=E2RL(RL+r)2P_L = \frac{\mathcal{E}^2 R_L}{(R_L + r)^2} yields PL,max⁡=E24rP_{L,\max} = \frac{\mathcal{E}^2}{4r}.

  • Use PL,max⁡=E24rP_{L,\max} = \frac{\mathcal{E}^2}{4r} directly as a quick check for the peak power delivered to a matched load.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the maximum power transfer theorem: RL=r=15.0 ΩR_L = r = 15.0\ \Omega.

  2. Substitute RL=15.0 ΩR_L = 15.0\ \Omega into the power expression: PL,max⁡=E24r=(60.0 V)24(15.0 Ω)P_{L,\max} = \frac{\mathcal{E}^2}{4r} = \frac{(60.0\ \text{V})^2}{4(15.0\ \Omega)}.

  3. Simplify the fraction: PL,max⁡=360060.0=60.0 WP_{L,\max} = \frac{3600}{60.0} = 60.0\ \text{W}.

Final answer

RL=15.0 ΩR_L = 15.0\ \Omega, PL,max⁡=60.0 WP_{L,\max} = 60.0\ \text{W}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the calculus derivation of dPLdRL=E2r−RL(RL+r)3=0\frac{dP_L}{dR_L} = \mathcal{E}^2 \frac{r - R_L}{(R_L + r)^3} = 0 to anchor why the peak occurs strictly at RL=rR_L = r.

  • Distinguish between load resistance RL=rR_L = r and total loop resistance Rtotal=2rR_{\text{total}} = 2r when working with matched circuits.

Lock it in

Similar question

01

A DC source has an open-circuit voltage E=24.0 V\mathcal{E} = 24.0\ \text{V} and internal resistance r=6.0 Ωr = 6.0\ \Omega. Find the power delivered to a load resistor of RL=6.0 ΩR_L = 6.0\ \Omega and verify whether this represents the maximum possible load power.

Answer

PL=24.0 WP_L = 24.0\ \text{W}. Current is I=24.06.0+6.0=2.0 AI = \frac{24.0}{6.0 + 6.0} = 2.0\ \text{A}. Power is PL=I2RL=(2.0)2(6.0)=24.0 WP_L = I^2 R_L = (2.0)^2(6.0) = 24.0\ \text{W}. Since RL=r=6.0 ΩR_L = r = 6.0\ \Omega, by the Maximum Power Transfer Theorem this is indeed PL,max⁡=E24r=57624=24.0 WP_{L,\max} = \frac{\mathcal{E}^2}{4r} = \frac{576}{24} = 24.0\ \text{W}.

02

A real voltage source with E=40.0 V\mathcal{E} = 40.0\ \text{V} and internal resistance r=10.0 Ωr = 10.0\ \Omega is connected to a variable resistor RLR_L. Calculate the load power when (i) RL=2.5 ΩR_L = 2.5\ \Omega, (ii) RL=10.0 ΩR_L = 10.0\ \Omega, and (iii) RL=40.0 ΩR_L = 40.0\ \Omega. Compare the values to show the peak behavior.

Answer

(i) For RL=2.5 ΩR_L = 2.5\ \Omega: I=4012.5=3.2 A  ⟹  PL=(3.2)2(2.5)=25.6 WI = \frac{40}{12.5} = 3.2\ \text{A} \implies P_L = (3.2)^2(2.5) = 25.6\ \text{W}.\n(ii) For RL=10.0 ΩR_L = 10.0\ \Omega: I=4020=2.0 A  ⟹  PL=(2.0)2(10.0)=40.0 WI = \frac{40}{20} = 2.0\ \text{A} \implies P_L = (2.0)^2(10.0) = 40.0\ \text{W}.\n(iii) For RL=40.0 ΩR_L = 40.0\ \Omega: I=4050=0.8 A  ⟹  PL=(0.8)2(40.0)=25.6 WI = \frac{40}{50} = 0.8\ \text{A} \implies P_L = (0.8)^2(40.0) = 25.6\ \text{W}.\nThe power starts low, reaches a maximum of 40.0 W40.0\ \text{W} at RL=r=10.0 ΩR_L = r = 10.0\ \Omega, and symmetrically drops as RLR_L continues to increase.

03

A solar panel model is represented by a Thévenin equivalent circuit with Vth=30.0 VV_{\text{th}} = 30.0\ \text{V} and Rth=5.0 ΩR_{\text{th}} = 5.0\ \Omega. If the load requires at least 40.0 W40.0\ \text{W} of power, find the allowable continuous range of load resistance RLR_L.

Answer

1.46 Ω≤RL≤17.1 Ω1.46\ \Omega \le R_L \le 17.1\ \Omega. Set PL(RL)=Vth2RL(RL+Rth)2≥40.0 W  ⟹  900RL(RL+5)2≥40  ⟹  900RL≥40(RL2+10RL+25)  ⟹  40RL2−500RL+1000≤0  ⟹  2RL2−25RL+50≤0P_L(R_L) = \frac{V_{\text{th}}^2 R_L}{(R_L + R_{\text{th}})^2} \ge 40.0\ \text{W} \implies \frac{900 R_L}{(R_L + 5)^2} \ge 40 \implies 900 R_L \ge 40(R_L^2 + 10 R_L + 25) \implies 40 R_L^2 - 500 R_L + 1000 \le 0 \implies 2 R_L^2 - 25 R_L + 50 \le 0. Solving the quadratic equation 2RL2−25RL+50=02 R_L^2 - 25 R_L + 50 = 0 yields RL=25±625−4004=25±154R_L = \frac{25 \pm \sqrt{625 - 400}}{4} = \frac{25 \pm 15}{4}, giving roots RL=2.5 ΩR_L = 2.5\ \Omega and RL=10.0 ΩR_L = 10.0\ \Omega. Thus, the allowable range is 2.5 Ω≤RL≤10.0 Ω2.5\ \Omega \le R_L \le 10.0\ \Omega.

Loading workspace…