Resources

Consider the diffraction pattern produced by light of wavelength λ=633 nm\lambda = 633\text{ nm} passing through an aperture of characteristic width ww viewed on a screen at distance L=1.00 mL = 1.00\text{ m}. The transition between Fresnel (near-field) and Fraunhofer (far-field) diffraction is governed by the Fresnel number NF=w2λLN_F = \frac{w^2}{\lambda L}. (a) Calculate the limiting slit width wcw_c in millimeters where NF=1.00N_F = 1.00. (b) In the extreme asymptotic limit where the slit width becomes very large (w→∞w \to \infty, or equivalently λ→0\lambda \to 0), explain what happens to the central diffraction peak angular width Δθ=2λw\Delta \theta = \frac{2\lambda}{w} and describe how wave optics asymptotically converges to geometric ray optics. (c) In the opposite extreme limit where w≤λw \le \lambda, describe the spatial distribution of the diffracted wavefront emerging from the slit into the forward half-space.

Answer and steps

Final answer

(a) wc=0.796 mmw_c = 0.796\text{ mm}; (b) Δθ→0\Delta \theta \to 0, wave diffraction effects vanish and light forms a crisp geometric shadow, reproducing ray optics; (c) The slit acts essentially as an omnidirectional cylindrical wave source, spreading out continuously across the entire forward half-space (±90∘\pm 90^\circ) without diffraction zeroes.

Steps

Part (a): Calculating the Critical Slit Width wcw_c

The Fresnel number NFN_F characterizes the diffraction regime: NF=w2λLN_F = \frac{w^2}{\lambda L}

Setting NF=1.00N_F = 1.00 defines the transition boundary between Fresnel diffraction (NF≳1N_F \gtrsim 1) and Fraunhofer diffraction (NF≪1N_F \ll 1): wc=NFλLw_c = \sqrt{N_F \lambda L}

Substitute the given values into SI units:

  • λ=633 nm=633×10−9 m\lambda = 633\text{ nm} = 633 \times 10^{-9}\text{ m}
  • L=1.00 mL = 1.00\text{ m}
  • NF=1.00N_F = 1.00

wc=1.00⋅(633×10−9 m)⋅(1.00 m)=6.33×10−7 m2≈7.956×10−4 mw_c = \sqrt{1.00 \cdot (633 \times 10^{-9}\text{ m}) \cdot (1.00\text{ m})} = \sqrt{6.33 \times 10^{-7}\text{ m}^2} \approx 7.956 \times 10^{-4}\text{ m}

Converting to millimeters: wc≈0.796 mmw_c \approx 0.796\text{ mm}


Part (b): Asymptotic Limit as w→∞w \to \infty (Ray Optics Limit)

The angular spread of the central diffraction maximum in the far field is given by: Δθ=2λw\Delta \theta = \frac{2\lambda}{w}

As the aperture width becomes macroscopic (w→∞w \to \infty), or equivalently as the wavelength becomes negligible compared to the aperture (λ→0\lambda \to 0): lim⁡w→∞Δθ=lim⁡w→∞2λw=0\lim_{w \to \infty} \Delta \theta = \lim_{w \to \infty} \frac{2\lambda}{w} = 0

  • Physical Interpretation: The angular spread collapses to zero, meaning the light waves undergo negligible angular divergence past the edges of the slit.
  • Convergence to Geometric Optics: The wave interference and fringing effects contract tightly around the geometrical boundaries of the slit. The illuminated region on the screen replicates the exact cross-section of the aperture, creating sharp, well-defined shadows outside the slit projection. Hence, wave optics smoothly recovers classical ray (geometric) optics in the short-wavelength / large-aperture limit.

Part (c): Deep Sub-Wavelength Limit (w≤λw \le \lambda)

The first diffraction minima (zeros of intensity) for a single slit occur at angles defined by: sin⁡θ=±λw\sin\theta = \pm \frac{\lambda}{w}

  • When w≤λw \le \lambda, the condition for the first minimum requires: ∣sin⁡θ∣=λw≥1|\sin\theta| = \frac{\lambda}{w} \ge 1
  • Because ∣sin⁡θ∣≤1|\sin\theta| \le 1 for all physical propagation angles in real space, no real angle θ\theta can satisfy this condition. Consequently, there are no diffraction zeroes anywhere in the observation domain.
  • Spatial Distribution: According to the Huygens-Fresnel principle, an aperture comparable to or narrower than the wavelength acts as a single coherent line source. The transmitted light forms semicircular (cylindrical) wavefronts that propagate uniformly into the entire forward half-space (−π2≤θ≤π2-\frac{\pi}{2} \le \theta \le \frac{\pi}{2}), yielding a smooth, omnidirectional intensity profile that gradually falls off solely due to the geometric obliquity factor.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to take the square root when solving for wc from the Fresnel number formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NF=wc2λL=1.00  ⟹  wc=λL=6.33×10−7 m×1.00 m  ⟹  wc=6.33×10−7 m=0.000633 mmN_F = \frac{w_c^2}{\lambda L} = 1.00 \implies w_c = \lambda L = 6.33 \times 10^{-7}\text{ m} \times 1.00\text{ m} \implies w_c = 6.33 \times 10^{-7}\text{ m} = 0.000633\text{ mm}

    Correct

    wc=NFλL=1.00⋅(6.33×10−7 m)⋅(1.00 m)≈7.96×10−4 m=0.796 mmw_c = \sqrt{N_F \lambda L} = \sqrt{1.00 \cdot (6.33 \times 10^{-7}\text{ m}) \cdot (1.00\text{ m})} \approx 7.96 \times 10^{-4}\text{ m} = 0.796\text{ mm}

    You set up the Fresnel number formula correctly, but when isolating wcw_c, you forgot to take the square root of wc2w_c^2. Multiplying λ\lambda by LL gives an area in m2\text{m}^2, which requires a square root to yield the slit width in meters.

  2. Step 2

    Δθ=2λw→0 as w→∞  ⟹  Diffraction spreading vanishes and light travels in straight lines matching geometric ray optics.\Delta \theta = \frac{2\lambda}{w} \to 0\text{ as }w \to \infty \implies \text{Diffraction spreading vanishes and light travels in straight lines matching geometric ray optics.}

  3. Step 3

    The diffraction pattern spreads across all forward angles up to 90 degrees. The slit acts like a line source emitting a cylindrical wave into the forward half-space.\text{The diffraction pattern spreads across all forward angles up to 90 degrees. The slit acts like a line source emitting a cylindrical wave into the forward half-space.}

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct definition for the Fresnel number NF=w2λLN_F = \frac{w^2}{\lambda L}.

You correctly took the limit of Δθ\Delta \theta as w→∞w \to \infty and connected it to ray optics.

You clearly explained the physical behavior of sub-wavelength apertures emitting cylindrical wavefronts.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic Isolation Error

You dropped the exponent of 22 on wcw_c when rearranging the equation 1.00=wc2λL1.00 = \frac{w_c^2}{\lambda L}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete algebraic inversion of a quadratic power, compounded by missing a dimensional check: λL\lambda L carries units of m2\text{m}^2, whereas a slit width requires units of m\text{m}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverting Squared Quantities
  • If x2A=B\frac{x^2}{A} = B, then x2=ABx^2 = AB and x=ABx = \sqrt{AB}.

  • Always apply a square root to both sides when isolating a squared variable.

Dimensional Consistency Check
  • The product of wavelength (length) and distance (length) produces an area ([L]2[\text{L}]^2).

  • Check the units of your isolated expression before plugging in numbers: [wc]=[L]⋅[L]=[L][w_c] = \sqrt{[\text{L}] \cdot [\text{L}]} = [\text{L}].

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange for wc2w_c^2: wc2=NFλL=1.00⋅(6.33×10−7 m)⋅(1.00 m)=6.33×10−7 m2w_c^2 = N_F \lambda L = 1.00 \cdot (6.33 \times 10^{-7}\text{ m}) \cdot (1.00\text{ m}) = 6.33 \times 10^{-7}\text{ m}^2.

  2. Take the square root of both sides: wc=6.33×10−7 m2≈7.956×10−4 mw_c = \sqrt{6.33 \times 10^{-7}\text{ m}^2} \approx 7.956 \times 10^{-4}\text{ m}.

  3. Convert to millimeters: wc=7.956×10−4×103 mm≈0.796 mmw_c = 7.956 \times 10^{-4} \times 10^3\text{ mm} \approx 0.796\text{ mm}.

Final answer

(a) wc≈0.796 mmw_c \approx 0.796\text{ mm}; (b) Δθ→0\Delta \theta \to 0, wave diffraction vanishes and forms geometric ray shadows; (c) The slit acts as an omnidirectional cylindrical source radiating across the entire forward half-space.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review isolating variables with powers to ensure inverse operations are fully applied.

  • Use dimensional analysis as a quick sanity check whenever solving for geometric parameters.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the inverse dependence in Δθ = 2λ/w as direct proportionality, concluding the diffraction peak broadens infinitely rather than narrowing.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    wc=1.00×6.33×10−7×1.00 m  ⟹  wc=7.96×10−4 m=0.796 mmw_c = \sqrt{1.00 \times 6.33 \times 10^{-7} \times 1.00\text{ m}} \implies w_c = 7.96 \times 10^{-4}\text{ m} = 0.796\text{ mm}

  2. Step 2

    As w→∞w \to \infty, the central peak width Δθ\Delta \theta increases toward infinity. The beam spreads over all space so ray optics is reached when the beam becomes completely diffuse.

    Correct

    As w→∞w \to \infty, Δθ=2λw→0\Delta \theta = \frac{2\lambda}{w} \to 0. The angular spread collapses to zero, diffraction divergence vanishes, and light forms crisp geometric shadows reproducing ray optics.

    Because ww appears in the denominator of Δθ=2λw\Delta \theta = \frac{2\lambda}{w}, taking the limit w→∞w \to \infty yields Δθ→0\Delta \theta \to 0, not infinity. Geometric ray optics is characterized by light traveling along straight lines without diffractive spreading, casting sharp shadows rather than diffusing across space.

  3. Step 3

    When w≤λw \le \lambda, diffraction spreads the wavefront widely over the entire forward hemisphere. The emerging wave is essentially a cylindrical wavefront.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the wavelength and screen distance into the Fresnel number formula to solve for the limiting slit width wcw_c.

You properly recognized that a sub-wavelength slit acts as a coherent line source emitting cylindrical waves into the forward hemisphere.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse proportionality misinterpretation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You misinterpreted the reciprocal relationship in Δθ=2λw\Delta \theta = \frac{2\lambda}{w}, concluding that increasing the denominator causes the fraction to grow toward infinity rather than vanish toward zero.

REASONING PATH
Your ACEpath teacher’s suggested approach
Asymptotic limit of reciprocal expressions
  • For a constant numerator c>0c > 0, lim⁡x→∞cx=0\lim_{x \to \infty} \frac{c}{x} = 0.

  • Check whether the variable lies in the numerator or denominator before determining whether a limit grows or decays.

Physical nature of the ray optics limit
  • Geometric optics is the short-wavelength / large-aperture limit (λw→0\frac{\lambda}{w} \to 0), where diffraction fringes vanish and light travels in straight rays producing sharp shadow boundaries.

  • Verify that your wave optics limit recovers straight-line ray paths rather than diffuse, omnidirectional spreading.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the limit: lim⁡w→∞Δθ=lim⁡w→∞2λw=0\lim_{w \to \infty} \Delta \theta = \lim_{w \to \infty} \frac{2\lambda}{w} = 0.

  2. Recognize that as Δθ→0\Delta \theta \to 0, the diffractive angular spread outside the aperture edges becomes zero.

  3. Conclude that light passes straight through the aperture without bending into the geometric shadow, reproducing classical ray optics.

Final answer

(a) wc=0.796 mmw_c = 0.796\text{ mm}; (b) Δθ→0\Delta \theta \to 0, wave diffraction vanishes and light forms crisp geometric shadows reproducing ray optics; (c) the slit radiates an omnidirectional cylindrical wavefront across the forward half-space without diffraction zeroes.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check limit evaluations where variables sit in denominators to ensure you do not reverse growth and decay.

  • Practice visualizing how wave optics smoothly transitions into geometric optics by having diffraction angles shrink to zero.

OverviewACEpath Teacher's Diagnosis

03 The student assumes that when the slit width is smaller than the wavelength, light cannot pass through at all due to cutoff, confusing diffraction with waveguide cutoff.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NF=wc2λL=1.00  ⟹  wc=λL=6.33×10−7×1.00 m=7.96×10−4 m=0.796 mmN_F = \frac{w_c^2}{\lambda L} = 1.00 \implies w_c = \sqrt{\lambda L} = \sqrt{6.33 \times 10^{-7} \times 1.00\text{ m}} = 7.96 \times 10^{-4}\text{ m} = 0.796\text{ mm}

  2. Step 2

    As w→∞,  Δθ=2λw→0\text{As } w \to \infty,\; \Delta \theta = \frac{2\lambda}{w} \to 0. Light rays propagate rectilinearly without diffraction, reproducing geometric shadows.

  3. Step 3

    Because w≤λw \le \lambda, the slit is below the wavelength cutoff. No propagating wave passes through the slit and the transmitted intensity into the forward half-space is zero.

    Correct

    For w≤λw \le \lambda, the first minimum condition sin⁡θ=±λw\sin\theta = \pm\frac{\lambda}{w} requires ∣sin⁡θ∣≥1|\sin\theta| \ge 1, which has no real angle solution. No diffraction zeros exist, and the slit acts as a coherent line source radiating cylindrical wavefronts across the entire forward half-space (−π2≤θ≤π2-\frac{\pi}{2} \le \theta \le \frac{\pi}{2}).

    You treated a thin-screen aperture as an extended hollow waveguide with a cutoff frequency. In thin-screen aperture diffraction, light still transmits through a slit when w≤λw \le \lambda; instead of being blocked, the diffraction pattern broadens until the first minimum disappears into unphysical angles (∣sin⁡θ∣>1|\sin\theta| > 1), creating an omnidirectional forward wave.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the Fresnel number definition to compute the transition slit width.

You accurately evaluated the short-wavelength / large-aperture asymptotic limit and explained convergence to geometric optics.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Waveguide Cutoff Confused with Single-Slit Diffraction

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused waveguide cutoff—which prevents propagation through long, conducting hollow tubes narrower than half a wavelength—with diffraction through an aperture in a thin screen, where waves continue to pass through and spread widely into the forward half-space.

REASONING PATH
Your ACEpath teacher’s suggested approach
Aperture Diffraction vs. Waveguide Cutoff
  • Waveguide cutoff occurs when electromagnetic waves travel down an extended conduit of length d≫λd \gg \lambda. An aperture in a thin screen (d≪λd \ll \lambda) does not cut off propagating waves; it diffracts them into the forward hemisphere.

  • Check whether the barrier is an extended pipe/waveguide or a thin aperture before invoking cutoff or evanescent modes.

Locating Diffraction Minima
  • The first single-slit diffraction minimum occurs at sin⁡θ=±λw\sin\theta = \pm\frac{\lambda}{w}. If w≤λw \le \lambda, then λw≥1\frac{\lambda}{w} \ge 1, meaning no real angle θ\theta satisfies the minimum condition.

  • When λw≥1\frac{\lambda}{w} \ge 1, conclude that the diffraction envelope has no zeros and spreads across all physical angles up to ±90∘\pm 90^\circ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the single-slit diffraction minimum condition: sin⁡θ=±λw\sin\theta = \pm \frac{\lambda}{w}.

  2. Evaluate the ratio λw\frac{\lambda}{w} when w≤λw \le \lambda: here λw≥1\frac{\lambda}{w} \ge 1.

  3. Notice that ∣sin⁡θ∣≤1|\sin\theta| \le 1 for all physical propagation angles in real space, so no diffraction zeros exist anywhere on the viewing screen.

  4. By the Huygens-Fresnel principle, the slit acts as an effective coherent line source, emitting cylindrical wavefronts uniformly into the entire forward half-space (−π2≤θ≤π2-\frac{\pi}{2} \le \theta \le \frac{\pi}{2}).

Final answer

(a) wc=0.796 mmw_c = 0.796\text{ mm}; (b) Δθ→0\Delta \theta \to 0, producing sharp geometric shadows corresponding to ray optics; (c) The slit acts as an omnidirectional line source radiating cylindrical wavefronts across the entire forward half-space (−π2≤θ≤π2-\frac{\pi}{2} \le \theta \le \frac{\pi}{2}) without diffraction minima.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the Huygens-Fresnel principle for sub-wavelength apertures to visualize how individual wavelets combine when aperture dimensions are smaller than λ\lambda.

  • Practice identifying the physical conditions required for true waveguide mode cutoff versus open-boundary Kirchhoff diffraction.

Lock it in

Similar question

01

A laser with λ=532 nm\lambda = 532\text{ nm} illuminates an aperture at a screen distance L=2.00 mL = 2.00\text{ m}. Calculate the critical aperture width wcw_c in millimeters corresponding to a Fresnel number NF=1.00N_F = 1.00.

Answer

wc≈1.03 mmw_c \approx 1.03\text{ mm}. Key steps: wc=NFλL=1.00⋅(5.32×10−7 m)⋅(2.00 m)=1.064×10−6 m2≈1.031×10−3 m=1.03 mmw_c = \sqrt{N_F \lambda L} = \sqrt{1.00 \cdot (5.32 \times 10^{-7}\text{ m}) \cdot (2.00\text{ m})} = \sqrt{1.064 \times 10^{-6}\text{ m}^2} \approx 1.031 \times 10^{-3}\text{ m} = 1.03\text{ mm}.

02

In a diffraction setup where w=0.50 mmw = 0.50\text{ mm} and λ=500 nm\lambda = 500\text{ nm}, find the transition distance LcL_c (in meters) where the Fresnel number equals 1.001.00. Does placing the screen at L=5.0 mL = 5.0\text{ m} place the system in the Fresnel or Fraunhofer regime?

Answer

Lc=0.50 mL_c = 0.50\text{ m}; Fraunhofer regime. Key steps: NF=w2λL=1.00  ⟹  Lc=w2λ=(5.0×10−4 m)25.0×10−7 m=0.50 mN_F = \frac{w^2}{\lambda L} = 1.00 \implies L_c = \frac{w^2}{\lambda} = \frac{(5.0 \times 10^{-4}\text{ m})^2}{5.0 \times 10^{-7}\text{ m}} = 0.50\text{ m}. At L=5.0 m>LcL = 5.0\text{ m} > L_c, NF=0.10≪1N_F = 0.10 \ll 1, placing it firmly in the Fraunhofer (far-field) regime.

03

A single slit of width w=400 nmw = 400\text{ nm} is illuminated by light of wavelength λ=600 nm\lambda = 600\text{ nm}. Show mathematically why no diffraction minima (zero-intensity points) appear on a distant screen.

Answer

No real angle satisfies the minimum condition. Key steps: Single-slit minima require sin⁡θ=mλw\sin\theta = \frac{m\lambda}{w}. For the first minimum (m=1m = 1), sin⁡θ=600 nm400 nm=1.5\sin\theta = \frac{600\text{ nm}}{400\text{ nm}} = 1.5. Since ∣sin⁡θ∣≤1|\sin\theta| \le 1 for all physical real angles, no angle θ\theta can produce zero intensity, resulting in light spreading continuously throughout the forward hemisphere.

Loading workspace…