Resources
A sealed rigid cylinder contains an ideal gas at an initial gauge pressure of and a temperature of . The ambient atmospheric pressure is . (a) Convert the initial gas temperature from degrees Fahrenheit to kelvins (). (b) If the gas is heated isochorically until its absolute pressure reaches , calculate the final absolute temperature in kelvins. (c) Convert this final temperature to degrees Celsius (). Round all answers to three significant figures.
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Part (a): Convert Initial Temperature from Fahrenheit to Kelvin
To convert a temperature from degrees Fahrenheit () to kelvins (), first convert to degrees Celsius (), then convert to kelvins:
- Convert to Celsius: Substituting :
- Convert to Kelvin:
Part (b): Calculate Final Absolute Temperature
An isochoric process occurs at constant volume (). In any gas law equation, absolute pressures and absolute temperatures must be used.
- Determine the initial absolute pressure (): Absolute pressure is the sum of gauge pressure and atmospheric pressure:
- Apply Gay-Lussac's Law for an isochoric process: Rearranging for the final temperature : Using and :
Common Pitfall: Never substitute gauge pressures into the ideal gas relations. The gas law holds strictly for absolute pressure and absolute temperature in kelvins.
Part (c): Convert Final Temperature to Degrees Celsius
To convert from kelvins back to degrees Celsius:
Typical errors
01 The student uses the gauge pressure directly as the absolute pressure in Gay-Lussac's law instead of adding atmospheric pressure, resulting in an overestimated final temperature.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You substituted the gauge pressure directly as . Ideal gas relationships require absolute pressure, so you must first add atmospheric pressure: .
- Step 3Correct
Your conversion formula from kelvins to Celsius was set up correctly, but the resulting value was thrown off by the incorrect value from part (b).
WHAT YOU DID WELL
Compliments from Your TeacherYou accurately converted temperature between Fahrenheit, Celsius, and Kelvin.
You identified the correct ideal gas relation (Gay-Lussac's Law) for an isochoric heating process.
You rearranged the pressure-temperature formula algebraically to isolate correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the given gauge pressure as the absolute pressure .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking that gas laws (such as and ) describe absolute thermodynamic states, requiring absolute pressure () rather than gauge pressure.
REASONING PATH
Your ACEpath teacher’s suggested approach- Absolute vs. Gauge Pressure
Whenever a problem specifies 'gauge pressure', immediately add ambient atmospheric pressure before substituting into any ideal gas law.
- Thermodynamic State Variables
Ideal gas laws strictly require absolute pressure in pascals and absolute temperature in kelvins.
Check every thermodynamic variable ( and ) to verify that neither is a relative or gauge quantity.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate initial absolute pressure: .
Apply Gay-Lussac's Law: .
Convert to Celsius: .
(a) ; (b) ; (c)
02 The student inverts the pressure ratio when applying the isochoric gas law, multiplying by P₁/P₂ instead of P₂/P₁.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
When solving for , cross-multiplying yields , so . You inverted the fraction to .
- Step 4Correct
You substituted your values consistently into the inverted formula, but the result is incorrect because of the algebraic error in the previous step.
- Step 5Correct
Your conversion method from kelvins to degrees Celsius is correct, but the numerical answer is affected by the earlier calculation of .
WHAT YOU DID WELL
Compliments from Your TeacherYou converted to kelvins accurately through Celsius.
You remembered to add atmospheric pressure to gauge pressure to obtain absolute pressure.
You identified Gay-Lussac's Law as the correct relation for an isochoric process.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally inverted the pressure ratio when isolating , writing instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou solved for an unknown denominator in a proportion by moving the adjacent term without inverting both sides or cross-multiplying first. Because pressure increased while heating, temperature had to increase above , not decrease.
REASONING PATH
Your ACEpath teacher’s suggested approach- Cross-multiplication check
For any proportion , cross-multiply to get before isolating an unknown denominator.
Write , then divide by to find .
- Physical trend sanity check
In an isochoric process with an ideal gas, pressure and absolute temperature are directly proportional ().
Since , the gas was heated, meaning must be greater than .
CORRECTED PATH
ACEpath Teacher's DemonstrationStart with and take reciprocals or cross-multiply: .
Isolate : .
Convert to degrees Celsius: .
(a) ; (b) ; (c)
03 The student uses the temperature in Celsius instead of absolute temperature in kelvins when applying the ideal gas relation, causing an incorrect final temperature.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You substituted the Celsius value instead of the absolute temperature . Ideal gas relations require temperature to be expressed strictly in kelvins.
- Step 4Correct
Your conversion procedure from kelvins to Celsius was set up correctly, but the result was thrown off by the incorrect value of from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the conversion formula to change to and .
You recognized that absolute pressure equals gauge pressure plus atmospheric pressure.
You correctly identified the proportional relationship between pressure and temperature for a constant-volume process.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou solved for in kelvins in Part (a), but accidentally reached for the intermediate Celsius value () when setting up Gay-Lussac's law in Part (b). Gas laws are based on kinetic energy and absolute zero, so the ratio is constant only when is in kelvins.
REASONING PATH
Your ACEpath teacher’s suggested approach- Absolute Temperature in Gas Laws
Every gas law equation (, , etc.) requires thermodynamic temperature in kelvins (), never degrees Celsius or Fahrenheit.
Before multiplying or dividing by temperature in any ideal gas formula, verify that the units are explicitly written in kelvins ().
- Sanity Check for Gas Heating
When a rigid container of gas is heated and its pressure increases, its final temperature must be greater than its initial temperature.
Compare your final temperature to the starting temperature: because pressure rose from to , had to exceed ().
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute the absolute temperature into Gay-Lussac's Law: .
Convert back to Celsius: .
(a) ; (b) ; (c)
Lock it in
What is the relationship between absolute pressure (), gauge pressure (), and atmospheric pressure ()?
. Gauge pressure measures the pressure difference above ambient atmospheric pressure.
Similar question
A rigid tank contains gas at a gauge pressure of and a temperature of . Atmospheric pressure is . If the gas is heated at constant volume to an absolute pressure of , find the final temperature in kelvins.
Answer
. Key steps: . Using Gay-Lussac's law, .
An ideal gas in a sealed rigid container is at an initial temperature of with an initial gauge pressure of when . The gas is cooled until the gauge pressure drops to . Calculate the final temperature in degrees Celsius.
Answer
. Key steps: . Initial absolute pressure ; final absolute pressure . . In Celsius: .
A flexible balloon contains gas at an initial gauge pressure of and temperature . Atmospheric pressure is . The balloon expands to while its gauge pressure drops to . Assuming ideal behavior, calculate the final temperature in kelvins.
Answer
. Key steps: Convert to absolute pressures: , . Convert temperature: . Use combined gas law: .