Resources

A vertical coordinate axis is established where the upward direction is defined as positive (+y+y). A sensor payload of mass m=5.50 kgm = 5.50\text{ kg} is released near the surface of Earth (g=9.80 m/s2g = 9.80\text{ m/s}^2). (a) Express the true weight of the payload as a formal vector W⃗\vec{W} using standard unit-vector notation j^\hat{j}. (b) If an upward atmospheric drag force F⃗d=+18.0j^ N\vec{F}_d = +18.0\hat{j}\text{ N} acts on the payload, set up Newton's second law along the yy-axis to solve for the vertical acceleration vector a⃗\vec{a}. (c) Identify whether the payload's inertia (mass) depends on the choice of coordinate direction.

Answer and steps

Final answer

(a) W⃗=−53.9j^ N\vec{W} = -53.9\hat{j}\text{ N}; (b) a⃗=−6.53j^ m/s2\vec{a} = -6.53\hat{j}\text{ m/s}^2 (or 6.53 m/s26.53\text{ m/s}^2 downward); (c) Mass is a scalar quantity (m=5.50 kgm = 5.50\text{ kg}) and is completely invariant under coordinate direction or reversal.

Steps

Part (a): Expressing Weight as a Vector

Mass mm is an intrinsic scalar measure of an object's inertia, whereas weight W⃗\vec{W} is the gravitational force exerted on that mass by Earth.

The magnitude of the gravitational force near Earth's surface is given by: W=mgW = mg

Substitute the given values: W=(5.50 kg)(9.80 m/s2)=53.9 NW = (5.50\text{ kg})(9.80\text{ m/s}^2) = 53.9\text{ N}

Since gravity pulls downward toward Earth's center and the +y+y-direction is defined as upward, the direction of the weight vector is along −j^-\hat{j}: W⃗=−53.9j^ N\vec{W} = -53.9\hat{j}\text{ N}


Part (b): Vertical Acceleration Using Newton's Second Law

According to Newton's second law, the net force along the vertical axis determines the vertical acceleration: ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}

Substitute the two acting forces—drag force F⃗d\vec{F}_d directed upward and weight W⃗\vec{W} directed downward: ΣF⃗=F⃗d+W⃗=(+18.0j^ N)+(−53.9j^ N)=−35.9j^ N\Sigma \vec{F} = \vec{F}_d + \vec{W} = (+18.0\hat{j}\text{ N}) + (-53.9\hat{j}\text{ N}) = -35.9\hat{j}\text{ N}

Solve for the acceleration vector a⃗\vec{a}: a⃗=ΣF⃗m=−35.9j^ N5.50 kg≈−6.53j^ m/s2\vec{a} = \frac{\Sigma \vec{F}}{m} = \frac{-35.9\hat{j}\text{ N}}{5.50\text{ kg}} \approx -6.53\hat{j}\text{ m/s}^2

The negative sign indicates that the net acceleration is directed downward with a magnitude of 6.53 m/s26.53\text{ m/s}^2.

Common Pitfall: Be careful not to subtract gg directly from the drag force. Newton's second law applies to the net force (ΣF\Sigma F), which must be divided by mass mm to find acceleration.


Part (c): Invariance of Mass (Inertia)

Mass is a fundamental scalar quantity quantifying an object's resistance to acceleration (inertia). Unlike vector quantities such as weight, velocity, or acceleration, scalar quantities have magnitude only and do not have directional components. Therefore, the payload's mass (m=5.50 kgm = 5.50\text{ kg}) remains completely invariant regardless of coordinate choice or axis reversal.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the scalar magnitude of weight with its vector representation, omitting the negative sign for the downward direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    W=m∗g=(5.50)(9.80)=53.9 N  ⟹  W⃗=+53.9j^ NW = m * g = (5.50)(9.80) = 53.9\text{ N} \implies \vec{W} = +53.9\hat{j}\text{ N}

    Correct

    W=mg=(5.50 kg)(9.80 m/s2)=53.9 N  ⟹  W⃗=−53.9j^ NW = mg = (5.50\text{ kg})(9.80\text{ m/s}^2) = 53.9\text{ N} \implies \vec{W} = -53.9\hat{j}\text{ N}

    You correctly calculated the magnitude of weight as 53.9 N53.9\text{ N}. However, because the upward direction is defined as +y+y, the downward gravitational pull must have a negative component along the vertical axis, giving W⃗=−53.9j^ N\vec{W} = -53.9\hat{j}\text{ N}.

  2. Step 2

    Fnet,y=18.0−53.9=−35.9 N  ⟹  ay=−35.95.50=−6.53 m/s2  ⟹  a⃗=−6.53j^ m/s2F_{\text{net}, y} = 18.0 - 53.9 = -35.9\text{ N} \implies a_y = \frac{-35.9}{5.50} = -6.53\text{ m/s}^2 \implies \vec{a} = -6.53\hat{j}\text{ m/s}^2

  3. Step 3

    No, inertia is a scalar property and does not depend on coordinate direction.\text{No, inertia is a scalar property and does not depend on coordinate direction.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used W=mgW = mg to find the scalar magnitude of the gravitational force.

You correctly set up the net force equation along the yy-axis with the appropriate signs for upward drag and downward gravity.

You solved for the vertical acceleration vector accurately using Newton's second law.

You correctly identified that inertia (mass) is a coordinate-invariant scalar quantity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Vector Weight

You treated the vector weight as positive along j^\hat{j} even though gravity acts downward and +y+y is defined as upward.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the positive scalar magnitude of weight (W=mgW = mg) with the directional vector form (W⃗\vec{W}), which requires checking the physical direction of gravity relative to your established coordinate axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Magnitude vs. Vector Form
  • Weight magnitude is always positive (W=mg>0W = mg > 0), while vector weight W⃗\vec{W} carries a sign determined by the chosen axis.

  • Always draw your coordinate axis arrow first; if the force points opposite to the axis, append a negative sign to its unit vector.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the magnitude: W=mg=(5.50 kg)(9.80 m/s2)=53.9 NW = mg = (5.50\text{ kg})(9.80\text{ m/s}^2) = 53.9\text{ N}.

  2. Check the physical direction of weight: gravity acts downward toward Earth's center.

  3. Compare with coordinate definition: +y+y is defined as upward (+j^+\hat{j}), so downward is −j^-\hat{j}.

  4. Write the vector weight: W⃗=−53.9j^ N\vec{W} = -53.9\hat{j}\text{ N}.

Final answer

(a) W⃗=−53.9j^ N\vec{W} = -53.9\hat{j}\text{ N}; (b) a⃗=−6.53j^ m/s2\vec{a} = -6.53\hat{j}\text{ m/s}^2; (c) Mass is a scalar and does not depend on coordinate direction.

NEXT STEPS
Final Takeaways from Your Teacher
  • Whenever you express a force as a vector, explicitly verify whether its physical direction agrees with or opposes your positive coordinate axis.

  • Remember that formulas like W=mgW = mg provide the magnitude only; you must supply the unit vector and sign based on your coordinate frame.

OverviewACEpath Teacher's Diagnosis

02 The student adds the magnitude of drag and weight together instead of subtracting opposing vertical forces when applying Newton's second law.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    W=(5.50)(9.80)=53.9 N  ⟹  W⃗=−53.9j^ NW = (5.50)(9.80) = 53.9\text{ N} \implies \vec{W} = -53.9\hat{j}\text{ N}

  2. Step 2

    Fnet,y=Fd+W=18.0+53.9=71.9 NF_{net,y} = F_d + W = 18.0 + 53.9 = 71.9\text{ N}

    Correct

    Fnet,y=Fd,y+Wy=+18.0 N+(−53.9 N)=−35.9 NF_{net,y} = F_{d,y} + W_y = +18.0\text{ N} + (-53.9\text{ N}) = -35.9\text{ N}

    Because upward is positive (+y+y), the upward drag force is +18.0 N+18.0\text{ N} and the downward gravitational force is −53.9 N-53.9\text{ N}. Adding their signed components gives a net vertical force of −35.9 N-35.9\text{ N}, but you added their positive magnitudes together.

  3. Step 3

    ay=71.95.50=13.1 m/s2  ⟹  a⃗=+13.1j^ m/s2a_y = \frac{71.9}{5.50} = 13.1\text{ m/s}^2 \implies \vec{a} = +13.1\hat{j}\text{ m/s}^2

    Correct

    a⃗=ΣF⃗m=−35.9j^ N5.50 kg≈−6.53j^ m/s2\vec{a} = \frac{\Sigma\vec{F}}{m} = \frac{-35.9\hat{j}\text{ N}}{5.50\text{ kg}} \approx -6.53\hat{j}\text{ m/s}^2

    Your division and vector assignment followed logically from your net force value, but the numerical acceleration and sign were affected by the earlier addition error.

  4. Step 4

    "No, mass is an intrinsic property that is independent of coordinate axes."

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the weight magnitude using W=mgW = mg and properly assigned the −j^-\hat{j} unit vector for part (a).

You correctly applied Newton's second law structure ay=ΣFyma_y = \frac{\Sigma F_y}{m} to solve for vertical acceleration.

You clearly identified that mass is an intrinsic scalar quantity independent of coordinate system orientation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in 1D force summation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated forces along the coordinate axis by their absolute magnitudes rather than retaining their directional signs (+18.0 N+18.0\text{ N} upward and −53.9 N-53.9\text{ N} downward) when setting up the net force equation ΣFy=Fd,y+Wy\Sigma F_y = F_{d,y} + W_y.

REASONING PATH
Your ACEpath teacher’s suggested approach
Component Signs in Net Force
  • Along a chosen axis, every force vector component carries a sign determined by its direction relative to that positive axis: ΣFy=∑Fi,y\Sigma F_y = \sum F_{i,y}.

  • Always draw a free-body diagram showing arrow directions, then substitute each force component with its explicit sign (++ for arrows along the positive axis, −- for arrows opposing it).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify force components along the defined +y+y axis: Fd,y=+18.0 NF_{d,y} = +18.0\text{ N} (upward) and Wy=−53.9 NW_y = -53.9\text{ N} (downward).

  2. Sum the components to find the net vertical force: ΣFy=(+18.0 N)+(−53.9 N)=−35.9 N\Sigma F_y = (+18.0\text{ N}) + (-53.9\text{ N}) = -35.9\text{ N}.

  3. Apply Newton's second law to find the vertical acceleration component: ay=ΣFym=−35.9 N5.50 kg≈−6.53 m/s2a_y = \frac{\Sigma F_y}{m} = \frac{-35.9\text{ N}}{5.50\text{ kg}} \approx -6.53\text{ m/s}^2.

  4. Write the final acceleration vector: a⃗=−6.53j^ m/s2\vec{a} = -6.53\hat{j}\text{ m/s}^2.

Final answer

(a) W⃗=−53.9j^ N\vec{W} = -53.9\hat{j}\text{ N}; (b) a⃗=−6.53j^ m/s2\vec{a} = -6.53\hat{j}\text{ m/s}^2; (c) Mass is an invariant scalar property that does not depend on coordinate axes.

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a quick free-body diagram before writing ΣFy\Sigma F_y so opposing arrows visually remind you to subtract magnitudes.

  • Check that your final acceleration direction makes physical sense: with downward gravity (53.9 N53.9\text{ N}) exceeding upward drag (18.0 N18.0\text{ N}), the payload must accelerate downward (−j^-\hat{j}).

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly treats inertia as a directional quantity that changes sign when coordinate axes are flipped.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    W=(5.50)(9.80)=53.9 N  ⟹  W⃗=−53.9j^ NW = (5.50)(9.80) = 53.9\text{ N} \implies \vec{W} = -53.9\hat{j}\text{ N}

  2. Step 2

    Fnet,y=18.0−53.9=−35.9 N  ⟹  ay=−35.95.50=−6.53 m/s2  ⟹  a⃗=−6.53j^ m/s2F_{\text{net}, y} = 18.0 - 53.9 = -35.9\text{ N} \implies a_y = \frac{-35.9}{5.50} = -6.53\text{ m/s}^2 \implies \vec{a} = -6.53\hat{j}\text{ m/s}^2

  3. Step 3

    Yes, inertia depends on the coordinate direction because motion and forces along negative axes require negative mass.

    Correct

    Mass (inertia) is a scalar quantity that is strictly non-negative and independent of coordinate system orientation (m=5.50 kgm = 5.50\text{ kg}).

    Mass is an intrinsic scalar property representing an object's quantity of matter and resistance to acceleration. It does not carry directional information or change sign when coordinate axes are flipped; direction is accounted for entirely by the sign of vector components.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the weight force magnitude using W=mgW = mg and expressed it with proper unit-vector notation.

You accurately applied Newton's second law along the yy-axis to determine both the sign and magnitude of the acceleration vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass vs. Weight & Scalar Invariance

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated scalar mass (an intrinsic, non-directional measure of inertia) with vector components of force and acceleration, wrongly concluding that negative motion requires negative mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scalar vs. Vector Nature of Mass and Weight
  • Mass mm is an intrinsic scalar (m>0m > 0), whereas weight W⃗=mg⃗\vec{W} = m\vec{g} is a vector force.

  • Always keep mass as a positive scalar in Newton's second law (ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}) and assign negative signs only to vector components or unit vectors.

Coordinate Invariance of Scalars
  • Scalars do not change under coordinate rotations or axis inversions.

  • If you reverse the positive coordinate direction, invert the signs of the components of F⃗\vec{F}, v⃗\vec{v}, and a⃗\vec{a}, but leave mm unchanged.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that mass measures the amount of matter and inertia of an object, which has magnitude only and no direction.

  2. Note that in ΣF⃗=ma⃗\Sigma \vec{F} = m\vec{a}, direction is carried solely by ΣF⃗\Sigma \vec{F} and a⃗\vec{a}.

  3. Conclude that mass remains 5.50 kg5.50\text{ kg} regardless of how the coordinate axes are defined.

Final answer

(a) W⃗=−53.9j^ N\vec{W} = -53.9\hat{j}\text{ N}; (b) a⃗=−6.53j^ m/s2\vec{a} = -6.53\hat{j}\text{ m/s}^2; (c) Mass is an invariant scalar quantity (5.50 kg5.50\text{ kg}) and does not depend on coordinate orientation.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between intrinsic scalar quantities (mass, time, energy) and vector quantities (displacement, velocity, force).

  • Practice rewriting Newton's second law for the same physical setup using inverted axes (+y+y downward) to verify that mm stays positive while signs of force and acceleration flip.

Lock it in

Similar question

01

A weather balloon of mass m=4.00 kgm = 4.00\text{ kg} experiences an upward buoyant force of +45.0j^ N+45.0\hat{j}\text{ N}. Upward is +y+y, and g=9.80 m/s2g = 9.80\text{ m/s}^2. (a) Write the balloon's weight vector W⃗\vec{W}. (b) Determine the net vertical acceleration vector a⃗\vec{a}.

Answer

(a) W⃗=−mgj^=−(4.00)(9.80)j^=−39.2j^ N\vec{W} = -mg\hat{j} = -(4.00)(9.80)\hat{j} = -39.2\hat{j}\text{ N}.\n(b) ΣF⃗=(+45.0j^)+(−39.2j^)=+5.8j^ N\Sigma\vec{F} = (+45.0\hat{j}) + (-39.2\hat{j}) = +5.8\hat{j}\text{ N}. Thus a⃗=ΣF⃗m=+5.8j^4.00=+1.45j^ m/s2\vec{a} = \frac{\Sigma\vec{F}}{m} = \frac{+5.8\hat{j}}{4.00} = +1.45\hat{j}\text{ m/s}^2.

02

A crate of mass m=12.0 kgm = 12.0\text{ kg} is lowered by a cable. Choose downward as the positive vertical direction (+y+y points downward). (a) Express the weight of the crate as a vector W⃗\vec{W}. (b) If the cable exerts an upward tension of magnitude 100 N100\text{ N}, express the tension vector T⃗\vec{T} and find the net acceleration vector a⃗\vec{a} (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

(a) Since downward is positive, W⃗=+mgj^=+(12.0)(9.80)j^=+118j^ N\vec{W} = +mg\hat{j} = +(12.0)(9.80)\hat{j} = +118\hat{j}\text{ N} (or +117.6j^ N+117.6\hat{j}\text{ N}).\n(b) Tension acts upward (negative direction), so T⃗=−100j^ N\vec{T} = -100\hat{j}\text{ N}. Net force ΣF⃗=(+117.6j^)+(−100j^)=+17.6j^ N\Sigma\vec{F} = (+117.6\hat{j}) + (-100\hat{j}) = +17.6\hat{j}\text{ N}. Acceleration a⃗=+17.6j^ N12.0 kg=+1.47j^ m/s2\vec{a} = \frac{+17.6\hat{j}\text{ N}}{12.0\text{ kg}} = +1.47\hat{j}\text{ m/s}^2 (downward).

03

An astronaut on Mars (gMars=3.71 m/s2g_{\text{Mars}} = 3.71\text{ m/s}^2) holds a rock of mass m=3.50 kgm = 3.50\text{ kg}. (a) State the rock's inertia in kilograms. (b) With upward defined as +y+y, write the rock's weight vector on Mars. (c) If an upward thruster applies F⃗=+20.0j^ N\vec{F} = +20.0\hat{j}\text{ N}, find a⃗\vec{a}.

Answer

(a) Inertia is mass: m=3.50 kgm = 3.50\text{ kg} (invariant across all locations and coordinates).\n(b) Weight magnitude is W=mg=(3.50)(3.71)=13.0 NW = mg = (3.50)(3.71) = 13.0\text{ N}. Downward direction means W⃗=−13.0j^ N\vec{W} = -13.0\hat{j}\text{ N}.\n(c) ΣF⃗=+20.0j^−13.0j^=+7.0j^ N\Sigma\vec{F} = +20.0\hat{j} - 13.0\hat{j} = +7.0\hat{j}\text{ N}. Acceleration a⃗=+7.0j^ N3.50 kg=+2.00j^ m/s2\vec{a} = \frac{+7.0\hat{j}\text{ N}}{3.50\text{ kg}} = +2.00\hat{j}\text{ m/s}^2.

Loading workspace…