Resources

A rectangular region of width d=0.120 md = 0.120\text{ m} along the xx-axis contains a uniform magnetic field B=0.250 TB = 0.250\text{ T} pointing out of the page (+z+z-direction). Protons (m=1.67×10−27 kgm = 1.67 \times 10^{-27}\text{ kg}, q=1.60×10−19 Cq = 1.60 \times 10^{-19}\text{ C}) enter normal to the boundary at x=0x = 0 traveling in the +x+x-direction. Find the minimum critical speed vcritv_{\text{crit}} required for a proton to penetrate the barrier and emerge from the opposite boundary at x=dx = d rather than being reflected back to the x≤0x \le 0 region.

Answer and steps

Final answer

vcrit=2.87×106 m/sv_{\text{crit}} = 2.87 \times 10^{6}\text{ m/s}

Steps

01

Understand the Geometry and the Magnetic Force

When a proton enters the magnetic field at the origin (0,0)(0, 0) traveling in the +x+x-direction, it experiences a magnetic Lorentz force:

F⃗=q(v⃗×B⃗)\vec{F} = q(\vec{v} \times \vec{B})

Given:

  • Velocity: v⃗=v i^\vec{v} = v\,\hat{i}
  • Magnetic field: B⃗=B k^\vec{B} = B\,\hat{k} (pointing out of the page)
  • Charge of a proton: q>0q > 0

Using the right-hand rule: F⃗=q(v i^×B k^)=−qvB j^\vec{F} = q(v\,\hat{i} \times B\,\hat{k}) = -qvB\,\hat{j}

The force is directed along the −y-y-direction, perpendicular to the velocity, causing the proton to execute uniform circular motion in the xyxy-plane with the center of its circular orbit located at (0,−R)(0, -R).


02

Determine the Orbit Radius and Penetration Condition

The magnetic force provides the necessary centripetal acceleration:

qvB=mv2R  ⟹  R=mvqBqvB = \frac{m v^2}{R} \implies R = \frac{mv}{qB}

Since the proton enters perpendicular to the left boundary (x=0x = 0):

  • Its circular path is centered at (0,−R)(0, -R) with equation: x2+(y+R)2=R2x^2 + (y + R)^2 = R^2
  • The maximum coordinate along the xx-axis reached by this circular path occurs after a 90∘90^\circ deflection, where x=Rx = R.
  • If R<dR < d, the proton completes a semicircle of diameter 2R2R and exits back through the entry boundary at x=0x = 0 (at the point (0,−2R)(0, -2R)).
  • To penetrate through the barrier and emerge from the right boundary at x=dx = d, the maximum reach of the path must be at least the slab thickness: R≥dR \ge d

Therefore, the minimum critical condition occurs when the radius just equals the thickness of the barrier:

Rcrit=dR_{\text{crit}} = d


03

Calculate the Critical Speed

Equating RcritR_{\text{crit}} to dd:

mvcritqB=d  ⟹  vcrit=qBdm\frac{m v_{\text{crit}}}{qB} = d \implies v_{\text{crit}} = \frac{qBd}{m}

Substitute the given numerical values:

  • q=1.60×10−19 Cq = 1.60 \times 10^{-19}\text{ C}
  • B=0.250 TB = 0.250\text{ T}
  • d=0.120 md = 0.120\text{ m}
  • m=1.67×10−27 kgm = 1.67 \times 10^{-27}\text{ kg}

vcrit=(1.60×10−19 C)(0.250 T)(0.120 m)1.67×10−27 kgv_{\text{crit}} = \frac{(1.60 \times 10^{-19}\text{ C})(0.250\text{ T})(0.120\text{ m})}{1.67 \times 10^{-27}\text{ kg}}

vcrit=4.80×10−211.67×10−27≈2.87×106 m/sv_{\text{crit}} = \frac{4.80 \times 10^{-21}}{1.67 \times 10^{-27}} \approx 2.87 \times 10^{6}\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the barrier width with the diameter of the circular trajectory rather than its radius, setting 2R = d instead of R = d.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F=qvB=mv2R  ⟹  R=mvqBF = qvB = \frac{mv^2}{R} \implies R = \frac{mv}{qB}

  2. Step 2

    To cross width \text{To cross width } d, diameter must equal width: \text{, diameter must equal width: } 2R = d   ⟹  \implies R = d2\frac{d}{2} = 0.060 m\text{ m}

    Correct

    R_{crit\text{crit}} = d = 0.120 m\text{ m}_

    Because the proton enters along the +x+x-direction normal to the boundary, the circular trajectory turns toward the −y-y-direction. The center of the circle lies at (0,−R)(0, -R), meaning the maximum depth reached along the xx-axis is xmax⁡=Rx_{\max} = R, not 2R2R. The full diameter 2R2R spans along the boundary (yy-axis), not into the slab.

  3. Step 3

    vcrit=qBd2m=(1.60×10−19)(0.250)(0.120)2×1.67×10−27=1.44×106 m/sv_{\text{crit}} = \frac{qBd}{2m} = \frac{(1.60 \times 10^{-19})(0.250)(0.120)}{2 \times 1.67 \times 10^{-27}} = 1.44 \times 10^6\text{ m/s}

    Correct

    vcrit=qBdm=(1.60×10−19 C)(0.250 T)(0.120 m)1.67×10−27 kg≈2.87×106 m/sv_{\text{crit}} = \frac{qBd}{m} = \frac{(1.60 \times 10^{-19}\text{ C})(0.250\text{ T})(0.120\text{ m})}{1.67 \times 10^{-27}\text{ kg}} \approx 2.87 \times 10^6\text{ m/s}

    Your numerical evaluation followed your formula correctly, but the result is half the actual critical speed due to using R=d/2R = d/2 instead of R=dR = d.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the magnetic force supplies the centripetal acceleration.

You correctly derived the cyclotron radius formula R=mvqBR = \frac{mv}{qB}.

You accurately substituted values and carried out the arithmetic for your derived expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric misinterpretation of trajectory dimensions

You equated the barrier thickness to the orbit diameter 2R2R rather than the orbit radius RR.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the particle's penetration depth as the diameter of the circle, overlooking that a particle entering perpendicular to a straight boundary has its center of curvature on that boundary line, so its maximum penetration perpendicular to the boundary is exactly one radius RR.

REASONING PATH
Your ACEpath teacher’s suggested approach
Locate the Center of Curvature
  • At normal incidence (v⊥v \perp boundary), the magnetic force F⃗=q(v⃗×B⃗)\vec{F} = q(\vec{v} \times \vec{B}) points parallel to the boundary edge, placing the center of curvature on the entry line.

  • Sketch the entry velocity v⃗\vec{v} and initial force vector F⃗\vec{F}. Draw the circular arc from the entry point toward the center to visually confirm how far into the field the arc reaches.

Differentiate Penetration Depth from Deflection Span
  • For normal incidence, maximum penetration depth into the field along xx is RR, while the separation between entry and exit along the boundary yy is 2R2R.

  • Set the barrier thickness d≤Rd \le R to ensure transmission through the far wall.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the penetration condition: the maximum coordinate along the xx-axis is xmax⁡=Rx_{\max} = R, so to penetrate across x=dx = d, we require R≥dR \ge d, giving Rcrit=dR_{\text{crit}} = d.

  2. Solve for critical velocity: vcrit=qBdmv_{\text{crit}} = \frac{qBd}{m}.

  3. Substitute the given numbers: vcrit=(1.60×10−19 C)(0.250 T)(0.120 m)1.67×10−27 kg=2.87×106 m/sv_{\text{crit}} = \frac{(1.60 \times 10^{-19}\text{ C})(0.250\text{ T})(0.120\text{ m})}{1.67 \times 10^{-27}\text{ kg}} = 2.87 \times 10^6\text{ m/s}.

Final answer

vcrit=2.87×106 m/sv_{\text{crit}} = 2.87 \times 10^6\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the coordinate axes, boundary line, and initial v⃗×B⃗\vec{v} \times \vec{B} direction before setting up geometric equalities.

  • Check which circle dimension (radius or diameter) aligns with the barrier thickness.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the radius formula as R = q B / (m v), leading to an incorrect algebraic dependence for the critical speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    R=qBmvR = \frac{q B}{m v}

    Correct

    qvB=mv2R  ⟹  R=mvqBq v B = \frac{m v^2}{R} \implies R = \frac{m v}{q B}

    You inverted the cyclotron radius formula. Balancing the magnetic Lorentz force with centripetal force gives qvB=mv2RqvB = \frac{mv^2}{R}, which solves to R=mvqBR = \frac{mv}{qB}.

  2. Step 2

    R=dR = d

  3. Step 3

    vcrit=qBmdv_{\text{crit}} = \frac{q B}{m d}

    Correct

    vcrit=qBdmv_{\text{crit}} = \frac{q B d}{m}

    Because your radius formula was inverted, solving for vv placed dd in the denominator instead of the numerator.

  4. Step 4

    vcrit=(1.60×10−19)(0.250)1.67×10−27×0.120=1.996×108 m/sv_{\text{crit}} = \frac{(1.60 \times 10^{-19})(0.250)}{1.67 \times 10^{-27} \times 0.120} = 1.996 \times 10^8\text{ m/s}

    Correct

    vcrit=(1.60×10−19 C)(0.250 T)(0.120 m)1.67×10−27 kg≈2.87×106 m/sv_{\text{crit}} = \frac{(1.60 \times 10^{-19}\text{ C})(0.250\text{ T})(0.120\text{ m})}{1.67 \times 10^{-27}\text{ kg}} \approx 2.87 \times 10^6\text{ m/s}

    Your numerical substitution and arithmetic are consistent with your formula, but the result is affected by the earlier inversion error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the geometric critical condition R=dR = d for a normally incident particle to penetrate the magnetic slab.

You correctly substituted the standard physical constants for the proton and carried out the arithmetic accurately for your formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Cyclotron Radius Formula

You wrote R=qBmvR = \frac{qB}{mv} instead of R=mvqBR = \frac{mv}{qB}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely misremembered the cyclotron radius or inverted the ratio when rearranging qvB=mv2RqvB = \frac{mv^2}{R}. A fast physical check is that a faster particle carries more momentum and therefore curves more gently into a larger radius (R∝vR \propto v), whereas a stronger field bends it tighter (R∝1BR \propto \frac{1}{B}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Centripetal Force Balance
  • For a charged particle moving perpendicular to a uniform magnetic field, magnetic force provides centripetal acceleration: FB=Fc  ⟹  qvB=mv2RF_B = F_c \implies qvB = \frac{mv^2}{R}.

  • Always derive or verify the radius by writing qvB=mv2RqvB = \frac{mv^2}{R} and canceling one factor of vv to obtain R=mvqB=pqBR = \frac{mv}{qB} = \frac{p}{qB}.

Physical Reality Check on Proportionality
  • Higher particle speed must increase the radius of curvature (R∝vR \propto v), not decrease it.

  • Check that vv appears in the numerator of RR before equating with distance or solving for speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the correct radius expression into the critical penetration condition: mvcritqB=d\frac{m v_{\text{crit}}}{q B} = d.

  2. Solve for vcritv_{\text{crit}} by multiplying both sides by qBqB and dividing by mm: vcrit=qBdmv_{\text{crit}} = \frac{q B d}{m}.

  3. Substitute the given numerical values: vcrit=(1.60×10−19 C)(0.250 T)(0.120 m)1.67×10−27 kg=4.80×10−211.67×10−27 m/sv_{\text{crit}} = \frac{(1.60 \times 10^{-19}\text{ C})(0.250\text{ T})(0.120\text{ m})}{1.67 \times 10^{-27}\text{ kg}} = \frac{4.80 \times 10^{-21}}{1.67 \times 10^{-27}}\text{ m/s}.

Final answer

vcrit≈2.87×106 m/sv_{\text{crit}} \approx 2.87 \times 10^6\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving R=mvqBR = \frac{mv}{qB} directly from F=maF = ma each time rather than reciting it from memory.

  • Use dimensional analysis ([R]=m[R] = \text{m}) or limiting-case intuition (v→∞  ⟹  R→∞v \to \infty \implies R \to \infty) to confirm that momentum mvmv belongs in the numerator.

Lock it in

Similar question

01

An electron (m=9.11×10−31 kgm = 9.11 \times 10^{-31}\text{ kg}, q=1.60×10−19 Cq = 1.60 \times 10^{-19}\text{ C}) enters a magnetic field slab of thickness d=5.0 cmd = 5.0\text{ cm} at normal incidence. If B=1.20×10−3 TB = 1.20 \times 10^{-3}\text{ T}, find the minimum speed vcritv_{\text{crit}} required for the electron to pass through the opposite side.

Answer

vcrit=1.05×107 m/sv_{\text{crit}} = 1.05 \times 10^7\text{ m/s}. At normal incidence, penetration requires R≥dR \ge d. Using vcrit=qBdm=(1.60×10−19)(1.20×10−3)(0.050)9.11×10−31≈1.05×107 m/sv_{\text{crit}} = \frac{qBd}{m} = \frac{(1.60 \times 10^{-19})(1.20 \times 10^{-3})(0.050)}{9.11 \times 10^{-31}} \approx 1.05 \times 10^7\text{ m/s}.

02

A particle with charge qq and mass mm enters a magnetic slab of thickness dd at normal incidence with speed v=qBd2mv = \frac{qBd}{2m}. At what point does it emerge from the field, and what is its exit direction relative to its entry direction?

Answer

It exits from the entry boundary at a distance 2R=d2R = d from the entry point, traveling in the opposite direction (180∘180^\circ deflection). Since R=mvqB=d2<dR = \frac{mv}{qB} = \frac{d}{2} < d, it completes a semicircle inside the field and returns to the boundary x=0x = 0.

03

A particle of charge q>0q > 0 enters a uniform magnetic field region x≥0x \ge 0 at the origin (0,0)(0,0) with velocity v⃗=vcos⁡θ i^+vsin⁡θ j^\vec{v} = v\cos\theta\,\hat{i} + v\sin\theta\,\hat{j} (0<θ<90∘0 < \theta < 90^\circ). If B⃗=B k^\vec{B} = B\,\hat{k}, what is the maximum depth xmax⁡x_{\max} the particle penetrates into the region x>0x > 0?

Answer

xmax⁡=R(1+sin⁡θ)=mvqB(1+sin⁡θ)x_{\max} = R(1 + \sin\theta) = \frac{mv}{qB}(1 + \sin\theta). The center of the circular orbit is located at (Rsin⁡θ,−Rcos⁡θ)(R\sin\theta, -R\cos\theta). The maximum coordinate reached along the xx-axis is xcenter+R=Rsin⁡θ+R=R(1+sin⁡θ)x_{\text{center}} + R = R\sin\theta + R = R(1 + \sin\theta).

Loading workspace…