Resources
A package of mass is projected up a ramp inclined at to the horizontal with an initial velocity of . The coefficient of kinetic friction between the package and the ramp surface is . Define a one-dimensional coordinate axis pointing parallel to the ramp and directed strictly upward along the incline. (a) Applying Newton's second law with explicit vector signs, calculate the component of the resultant force parallel to the ramp, , and the corresponding acceleration while the package slides upward. (b) Calculate the maximum distance the package travels along the ramp before momentarily coming to rest. Use .
Answer and steps
Final answer
(a) , ; (b)
Steps
Part (a): Resultant Force and Acceleration Along the Incline
Step 1: Define the coordinate system and identify forces
- Let the -axis point up the incline, parallel to the ramp surface.
- Let the perpendicular axis pointing away from the ramp surface be the positive normal direction.
- The forces acting on the package of mass are:
- Gravity, acting vertically downward with magnitude .
- The normal force , acting perpendicular to and away from the ramp surface.
- The kinetic friction force , which always opposes relative sliding motion. Since the package is moving upward along , friction acts down the incline in the direction.
Step 2: Determine the normal force Because there is no acceleration perpendicular to the ramp surface:
Substitute the given values:
Step 3: Calculate the magnitude of kinetic friction Using the friction model :
Step 4: Calculate the resultant force along the -axis Both the component of gravity down the slope and kinetic friction point in the negative -direction:
Step 5: Calculate the acceleration Using Newton's second law along the -axis:
(Common Pitfall: Do not assume friction acts down the slope in every situation. While the package moves upward, friction opposes that upward motion and points downward. If the package were sliding back down, friction would reverse direction and point upward.)
Part (b): Maximum Distance Along the Ramp
The package travels upward with constant acceleration until it momentarily comes to rest ().
Using the kinematic relation between velocity, acceleration, and displacement:
Setting :
Typical errors
01 The student incorrectly assumes friction acts up the ramp to resist gravity rather than opposing the upward velocity, resulting in a positive sign for the friction term in ΣF_s.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the package slides upward along the direction, kinetic friction opposes the velocity and points downward in the direction. Therefore, friction must enter with a negative sign: .
- Step 3Correct
You applied the correct kinematic relationship for constant acceleration, but the numerical distance was affected by the incorrect value of from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved gravity perpendicular to the incline to calculate the normal force.
You correctly evaluated the magnitude of kinetic friction using .
You chose the appropriate kinematic equation to relate velocity, acceleration, and stopping distance.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated friction as an upward force counteracting the downward component of gravity, rather than as a resistive force that always opposes the instantaneous direction of relative velocity.
REASONING PATH
Your ACEpath teacher’s suggested approach- Direction of Kinetic Friction
Kinetic friction always acts antiparallel to the relative velocity vector of the sliding surface.
Check the direction of motion first: if the object moves upward along the ramp (), friction points downward ().
- Signs in Newton's Second Law
Every force term in must carry a sign matching its vector direction along the chosen coordinate axis.
Since both the gravity component along the ramp and kinetic friction point down the incline, both must have negative signs in .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the sum of forces parallel to the ramp with friction opposing the upward velocity: .
Substitute the numerical values: .
Calculate the acceleration: .
Substitute into the kinematic formula: .
Solve for stopping distance: .
(a) , ; (b)
02 The student swaps the sine and cosine trigonometric components for gravity and the normal force on the incline.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The normal force balances the component of gravity perpendicular to the incline, which is , not .
- Step 2Correct
You correctly accounted for negative signs pointing down the ramp, but the parallel gravity component uses rather than , and this step also inherited the inaccurate friction value from Step 1.
- Step 3Correct
You selected and rearranged the correct kinematic equation for stopping distance, but substituting the incorrect acceleration led to an inaccurate final distance.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that both gravity down the incline and kinetic friction oppose upward motion along the positive -axis.
You correctly related normal force to kinetic friction using .
You applied Newton's second law and the kinematic relation with sound algebraic execution.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou reversed the trigonometric functions when resolving gravity relative to the incline: you used sine for the perpendicular component and cosine for the parallel component, which is the reverse of the standard ramp decomposition where the incline angle is measured from the horizontal.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Angle Reference
When an incline angle is measured relative to the horizontal, the angle between the vertical gravity vector and the ramp normal is also .
Associate the adjacent side to the ramp normal () and the opposite side down the slope ().
- Limiting Case Sanity Check
As the incline angle goes to zero (a flat surface), normal force should equal full weight , and downhill gravity should vanish.
Test : gives , and gives zero downhill pull, confirming belongs to .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the normal force: .
Recalculate kinetic friction: .
Re-evaluate net parallel force: .
Recalculate acceleration: .
Recalculate maximum travel distance: .
, ,
03 The student forgets to account for kinetic friction entirely, including only the component of gravity along the ramp.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
\Sigma F_s = -m g \sin(30.0^) \Sigma F_s = -8.50 9.80 0.500 = -41.65
Correct\Sigma F_s = -mg\sin - f_k = -mg(\sin + k\cos) -57.5
Because the ramp is rough with and the package slides upward, kinetic friction acts downward along the incline (in the direction) alongside gravity.
- Step 2
a_s = = -g \sin(30.0^) = -4.90^2
Correcta_s = = -g(\sin + k\cos) -6.77^2
You correctly applied Newton's second law , but the value is affected by the missing friction force in .
- Step 3
v^2 = v_0^2 + 2 a_s d 0 = 6.20^2 + 2 (-4.90) d d = = 3.92
Correct0 = v_0^2 + 2a_s d d = = 2.84
You selected and rearranged the correct kinematic equation for stopping distance, but your numerical result carries forward the incorrect acceleration from earlier.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the component of gravity acting down the incline with the proper negative sign.
You applied Newton's second law algebraically to relate net force to acceleration.
You correctly chose the constant-acceleration kinematic formula to find the stopping distance.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou solved the problem as if the incline were frictionless, leaving out kinetic friction entirely despite being given .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIncomplete free-body force inventory along the incline. Whenever a contact surface has a nonzero coefficient of friction () and relative motion occurs, a friction force opposes the sliding velocity and must be included in .
REASONING PATH
Your ACEpath teacher’s suggested approach- Perform a complete force tally
Every surface contact exerts both a normal force perpendicular to the surface and, if rough, a friction force parallel to the surface.
Always list every given parameter from the problem statement (such as ) and verify that each appears in your free-body diagram.
- Determine friction direction from relative velocity
Kinetic friction always opposes the direction of relative sliding motion: .
Since the package travels up the incline (), friction points down the incline (), adding to the downward gravitational component.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate normal force: .
Calculate kinetic friction force magnitude: .
Compute parallel net force: .
Compute acceleration: .
Compute stopping distance: .
(a) , ; (b)
Lock it in
What physical quantity determines the direction of kinetic friction acting on a sliding object?
The relative velocity of the sliding object. Kinetic friction always points in the direction directly opposite to the velocity vector relative to the contact surface.
Similar question
A block is projected up a incline with an initial speed of . The coefficient of kinetic friction is . Taking the positive axis up the ramp, find the acceleration of the block while it slides upward. Use .
Answer
. Key steps: ; . Since the block slides up, both gravity and friction act down the ramp: . Then .
A sled slides down an incline tilted at to the horizontal. The coefficient of kinetic friction is . With the positive axis directed down the incline, determine the net force parallel to the incline and the acceleration of the sled. Use .
Answer
, . Key steps: Downward component of gravity is . Normal force is , so friction is . Because motion is down the ramp, friction points up the ramp (negative direction): . Acceleration is .
A crate is launched up a incline at . The coefficient of kinetic friction is . It travels up to rest, stops momentarily, and then slides back down to the launch point. Find the crate's acceleration during the upward trip () and during the downward trip (). Use and define positive up the ramp.
Answer
, . Key steps: directed down (). Normal force , so . On the way up, velocity is , so friction is : . On the way down, velocity is , so friction opposes it by pointing : .