Resources

A horizontal simple harmonic oscillator has an amplitude of A=0.200 mA = 0.200\text{ m}. At what positive displacement xx from the equilibrium position is the potential energy UU of the spring exactly equal to 25.0%25.0\% of the total mechanical energy EE? Furthermore, determine the ratio of the block's kinetic energy to its potential energy, KU\frac{K}{U}, at this exact position.

Answer and steps

Final answer

Displacement x=0.100 mx = 0.100\text{ m}; ratio KU=3.00\frac{K}{U} = 3.00.

Steps

01

Expressions for Energy in Simple Harmonic Motion

For a horizontal mass-spring oscillator undergoing simple harmonic motion with amplitude AA and spring constant kk:

  • The total mechanical energy EE is conserved and depends only on the amplitude: E=12kA2E = \frac{1}{2} k A^2
  • The elastic potential energy UU at any displacement xx from the equilibrium position (x=0x = 0) is: U=12kx2U = \frac{1}{2} k x^2

02

Finding the Positive Displacement xx

We are given that the potential energy is 25.0%25.0\% (or 0.2500.250) of the total mechanical energy: U=0.250EU = 0.250 E

Substitute the expressions for UU and EE: 12kx2=0.250(12kA2)\frac{1}{2} k x^2 = 0.250 \left(\frac{1}{2} k A^2\right)

Cancel the common factor of 12k\frac{1}{2}k from both sides: x2=0.250A2x^2 = 0.250 A^2

Take the positive square root to find the positive displacement: x=0.250 A=0.500Ax = \sqrt{0.250}\, A = 0.500 A

Substitute the given amplitude A=0.200 mA = 0.200\text{ m}: x=0.500⋅0.200 m=0.100 mx = 0.500 \cdot 0.200\text{ m} = 0.100\text{ m}

Common Pitfall: Potential energy is proportional to the square of the displacement (U∝x2U \propto x^2), not to displacement itself. A common mistake is to set x=0.250Ax = 0.250 A. Because of the quadratic relationship, the potential energy drops to one-quarter of the total when the displacement is halved (x=12Ax = \frac{1}{2}A).


03

Finding the Ratio of Kinetic to Potential Energy (KU\frac{K}{U})

By the conservation of mechanical energy, the sum of kinetic energy KK and potential energy UU equals the total mechanical energy EE: E=K+U  ⟹  K=E−UE = K + U \implies K = E - U

Since U=0.250EU = 0.250 E: K=E−0.250E=0.750EK = E - 0.250 E = 0.750 E

Now, compute the ratio KU\frac{K}{U}: KU=0.750E0.250E=0.7500.250=3.00\frac{K}{U} = \frac{0.750 E}{0.250 E} = \frac{0.750}{0.250} = 3.00

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student might assume that potential energy scales linearly with displacement rather than with the square of displacement, setting x = 0.250A instead of taking the square root.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    U=0.250E  ⟹  x=0.250×A=0.250×0.200 m=0.050 mU = 0.250 E \implies x = 0.250 \times A = 0.250 \times 0.200\text{ m} = 0.050\text{ m}

    Correct

    U=12kx2=0.250(12kA2)  ⟹  x=0.250 A=0.500(0.200 m)=0.100 mU = \frac{1}{2} k x^2 = 0.250 \left(\frac{1}{2} k A^2\right) \implies x = \sqrt{0.250}\,A = 0.500(0.200\text{ m}) = 0.100\text{ m}

    Elastic potential energy is quadratic with respect to position (U=12kx2U = \frac{1}{2}kx^2), meaning U∝x2U \propto x^2. Setting U=0.250EU = 0.250 E yields x2=0.250A2x^2 = 0.250 A^2, so you must take the square root (x=0.250 A=0.500Ax = \sqrt{0.250}\,A = 0.500 A).

  2. Step 2

    K=E−U=0.750E  ⟹  KU=0.750E0.250E=3.00K = E - U = 0.750E \implies \frac{K}{U} = \frac{0.750E}{0.250E} = 3.00

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that total energy is partitioned between kinetic and potential energy such that K=E−U=0.750EK = E - U = 0.750E.

You calculated the exact energy ratio KU=3.00\frac{K}{U} = 3.00 with clear, logical steps.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear scaling trap for quadratic energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated potential energy as directly proportional to displacement (U∝xU \propto x) rather than directly proportional to the square of displacement (U∝x2U \propto x^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadratic Dependence of Potential Energy
  • For a spring oscillator, U(x)=12kx2U(x) = \frac{1}{2}kx^2 and E=12kA2E = \frac{1}{2}kA^2. Therefore, UE=(xA)2\frac{U}{E} = \left(\frac{x}{A}\right)^2.

  • Whenever a fraction f=UEf = \frac{U}{E} is given, solve for position using x=f Ax = \sqrt{f}\,A, not x=fAx = f A.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the potential energy fraction algebraically: UE=12kx212kA2=(xA)2=0.250\frac{U}{E} = \frac{\frac{1}{2}kx^2}{\frac{1}{2}kA^2} = \left(\frac{x}{A}\right)^2 = 0.250.

  2. Take the positive square root: x=0.250 A=0.500Ax = \sqrt{0.250}\,A = 0.500 A.

  3. Substitute A=0.200 mA = 0.200\text{ m}: x=0.500(0.200 m)=0.100 mx = 0.500(0.200\text{ m}) = 0.100\text{ m}.

Final answer

Displacement x=0.100 mx = 0.100\text{ m}; ratio KU=3.00\frac{K}{U} = 3.00

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship UE=(xA)2\frac{U}{E} = \left(\frac{x}{A}\right)^2 and KE=1−(xA)2\frac{K}{E} = 1 - \left(\frac{x}{A}\right)^2 for simple harmonic oscillators.

  • Practice setting up energy ratios directly in terms of xA\frac{x}{A} before substituting numerical values.

OverviewACEpath Teacher's Diagnosis

02 A student might invert the ratio and calculate U/K instead of K/U.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    U=0.250E  ⟹  (1/2)kx2=0.250⋅(1/2)kA2  ⟹  x2=0.250A2  ⟹  x=0.500⋅0.200 m=0.100 mU = 0.250 E \implies (1/2)kx^2 = 0.250 \cdot (1/2)kA^2 \implies x^2 = 0.250 A^2 \implies x = 0.500 \cdot 0.200\text{ m} = 0.100\text{ m}

  2. Step 2

    K=E−U=0.750EK = E - U = 0.750 E

  3. Step 3

    Ratio=UK=0.250E0.750E=13  ⟹  K/U=0.333\text{Ratio} = \frac{U}{K} = \frac{0.250 E}{0.750 E} = \frac{1}{3} \implies K/U = 0.333

    Correct

    KU=0.750E0.250E=3.00\frac{K}{U} = \frac{0.750 E}{0.250 E} = 3.00

    You set up the ratio upside-down as UK\frac{U}{K} instead of KU\frac{K}{U}, which gave 13\frac{1}{3} instead of 3.003.00.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the quadratic relation U=12kx2U = \frac{1}{2}kx^2 to find the displacement xx.

You correctly applied energy conservation E=K+UE = K + U to find that kinetic energy accounts for 75.0%75.0\% of the total mechanical energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Ratio

You set up the fraction with potential energy in the numerator and kinetic energy in the denominator, evaluating UK\frac{U}{K} instead of KU\frac{K}{U}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You interchanged the roles of the numerator and denominator when translating the verbal prompt 'ratio of kinetic energy to potential energy' into mathematical notation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Phrasing to Ratio Notation
  • The phrase 'ratio of AA to BB' translates strictly to the fraction AB\frac{A}{B}.

  • Always write the first-named quantity in the numerator and the second-named quantity in the denominator before substituting numerical values.

Physical Reality Check
  • At x=0.500Ax = 0.500A, the oscillator is closer to equilibrium than to the turning point, so kinetic energy must be greater than potential energy (K>UK > U).

  • Verify that KU>1\frac{K}{U} > 1 whenever the system has more than half of its total energy as kinetic energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the target ratio: KU\frac{K}{U}.

  2. Substitute K=0.750EK = 0.750 E and U=0.250EU = 0.250 E: KU=0.750E0.250E\frac{K}{U} = \frac{0.750 E}{0.250 E}.

  3. Divide to find the final value: 0.7500.250=3.00\frac{0.750}{0.250} = 3.00.

Final answer

Displacement x=0.100 mx = 0.100\text{ m}; ratio KU=3.00\frac{K}{U} = 3.00.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the fraction order precisely matches the requested ratio ('ratio of KK to UU' means KK over UU).

  • Perform a quick magnitude check: if K=0.750EK = 0.750E and U=0.250EU = 0.250E, KK is three times larger than UU, so the ratio KU\frac{K}{U} must equal 33, not 13\frac{1}{3}.

OverviewACEpath Teacher's Diagnosis

03 A student might divide kinetic energy by total mechanical energy instead of potential energy, calculating K/E rather than K/U.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    U=0.250E  ⟹  x2=0.250A2  ⟹  x=0.500⋅0.200 m=0.100 mU = 0.250E \implies x^2 = 0.250A^2 \implies x = 0.500 \cdot 0.200\text{ m} = 0.100\text{ m}

  2. Step 2

    K=E−U=0.750EK = E - U = 0.750E

  3. Step 3

    KU\frac{K}{U} = KE\frac{K}{E} = 0.750EE\frac{0.750E}{E} = 0.750

    Correct

    KU=0.750E0.250E=3.00\frac{K}{U} = \frac{0.750E}{0.250E} = 3.00

    You replaced the denominator UU with total mechanical energy EE, calculating the energy fraction KE\frac{K}{E} rather than the requested energy ratio KU\frac{K}{U}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the quadratic dependence of potential energy on displacement (U∝x2U \propto x^2) to find xx.

You accurately applied energy conservation E=K+UE = K + U to find that K=0.750EK = 0.750E.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Target-quantity substitution error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted total energy EE into the denominator instead of the given potential energy U=0.250EU = 0.250E, confusing the fraction of total energy KE\frac{K}{E} with the energy ratio KU\frac{K}{U}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify the Denominator
  • An energy ratio AB\frac{A}{B} compares quantity AA to quantity BB, whereas an energy fraction AE\frac{A}{E} compares quantity AA to the total energy EE.

  • Before calculating, circle the exact denominator requested in the problem statement (UU, not EE).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute K=0.750EK = 0.750E and U=0.250EU = 0.250E into the requested ratio: KU=0.750E0.250E\frac{K}{U} = \frac{0.750E}{0.250E}

  2. Simplify the fraction: 0.7500.250=3.00\frac{0.750}{0.250} = 3.00

Final answer

Displacement x=0.100 mx = 0.100\text{ m}; ratio KU=3.00\frac{K}{U} = 3.00

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check whether a question asks for a component-to-component ratio (such as KU\frac{K}{U}) or a component-to-total fraction (such as KE\frac{K}{E}).

  • Practice writing the variable definitions explicitly before substituting algebraic values into ratios.

Lock it in

Similar question

01

A mass-spring oscillator oscillates horizontally with an amplitude of A=0.400 mA = 0.400\text{ m}. At what positive displacement xx is the potential energy equal to 16.0%16.0\% of the total mechanical energy?

Answer

Since U=0.160EU = 0.160 E, we have (xA)2=0.160  ⟹  x=0.160 A=0.400(0.400 m)=0.160 m\left(\frac{x}{A}\right)^2 = 0.160 \implies x = \sqrt{0.160}\,A = 0.400(0.400\text{ m}) = 0.160\text{ m}.

02

A simple harmonic oscillator has amplitude A=0.300 mA = 0.300\text{ m}. At what positive position xx is the kinetic energy equal to 64.0%64.0\% of the total mechanical energy?

Answer

By conservation of energy, U=E−K=E−0.640E=0.360EU = E - K = E - 0.640E = 0.360E. Then (xA)2=0.360  ⟹  x=0.360 A=0.600(0.300 m)=0.180 m\left(\frac{x}{A}\right)^2 = 0.360 \implies x = \sqrt{0.360}\,A = 0.600(0.300\text{ m}) = 0.180\text{ m}.

03

An object in simple harmonic motion has total mechanical energy E=50.0 JE = 50.0\text{ J} and amplitude A=0.500 mA = 0.500\text{ m}. Find its kinetic energy KK when its displacement is x=0.250 mx = 0.250\text{ m}, and find the ratio KU\frac{K}{U} at this point.

Answer

At x=0.250 m=0.500Ax = 0.250\text{ m} = 0.500 A, the potential energy is U=E(xA)2=50.0(0.500)2=12.5 JU = E\left(\frac{x}{A}\right)^2 = 50.0(0.500)^2 = 12.5\text{ J}. Thus K=E−U=37.5 JK = E - U = 37.5\text{ J}, and the ratio is KU=37.5 J12.5 J=3.00\frac{K}{U} = \frac{37.5\text{ J}}{12.5\text{ J}} = 3.00.

Loading workspace…