Resources

A high-speed industrial centrifuge rotates micro-pellets. Each pellet has a mass of m=45.0 mgm = 45.0\text{ mg} and is elevated to a height of h=18.5 cmh = 18.5\text{ cm} above the baseplate while moving at a linear tangential speed of v=144 km/hv = 144\text{ km/h}. Taking the baseplate as the potential energy reference zero: (a) Convert all quantities to base SI units and calculate the gravitational potential energy UgU_g of a single pellet in joules. (b) Calculate the kinetic energy KK of the pellet in joules. (c) Determine the ratio KUg\frac{K}{U_g}. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) Ug=8.16×10−5 JU_g = 8.16 \times 10^{-5}\text{ J}; (b) K=3.60×10−2 JK = 3.60 \times 10^{-2}\text{ J}; (c) KUg=441\frac{K}{U_g} = 441.

Steps

Part (a): Unit Conversions and Gravitational Potential Energy

Before computing energy values, convert all given quantities into standard SI units:

  1. Mass (mm):
    m=45.0 mg=45.0×10−3 g=45.0×10−6 kg=4.50×10−5 kgm = 45.0\text{ mg} = 45.0 \times 10^{-3}\text{ g} = 45.0 \times 10^{-6}\text{ kg} = 4.50 \times 10^{-5}\text{ kg} (Caution: A common mistake is converting milligrams directly to grams or using a factor of 10−310^{-3} instead of 10−610^{-6} for kilograms).
  2. Height (hh):
    h=18.5 cm=0.185 mh = 18.5\text{ cm} = 0.185\text{ m}
  3. Speed (vv):
    v=144 km/h=1443.6 m/s=40.0 m/sv = 144\text{ km/h} = \frac{144}{3.6}\text{ m/s} = 40.0\text{ m/s}

With the baseplate designated as the reference level (h=0h = 0), the gravitational potential energy UgU_g is given by:

Ug=mghU_g = mgh

Substitute the values:

Ug=(4.50×10−5 kg)⋅(9.80 m/s2)⋅(0.185 m)=8.1585×10−5 J≈8.16×10−5 JU_g = (4.50 \times 10^{-5}\text{ kg}) \cdot (9.80\text{ m/s}^2) \cdot (0.185\text{ m}) = 8.1585 \times 10^{-5}\text{ J} \approx 8.16 \times 10^{-5}\text{ J}


Part (b): Kinetic Energy

The kinetic energy KK of an object of mass mm moving at speed vv is:

K=12mv2K = \frac{1}{2}mv^2

Substitute the SI values:

K=12⋅(4.50×10−5 kg)⋅(40.0 m/s)2K = \frac{1}{2} \cdot (4.50 \times 10^{-5}\text{ kg}) \cdot (40.0\text{ m/s})^2

K=12⋅(4.50×10−5 kg)⋅(1600 m2/s2)=3.60×10−2 JK = \frac{1}{2} \cdot (4.50 \times 10^{-5}\text{ kg}) \cdot (1600\text{ m}^2/\text{s}^2) = 3.60 \times 10^{-2}\text{ J}


Part (c): Energy Ratio

To find the ratio of kinetic energy to gravitational potential energy:

KUg=3.60×10−2 J8.1585×10−5 J≈441\frac{K}{U_g} = \frac{3.60 \times 10^{-2}\text{ J}}{8.1585 \times 10^{-5}\text{ J}} \approx 441

Alternative method: Notice that the mass mm cancels out algebraically:

KUg=12mv2mgh=v22gh=(40.0 m/s)22⋅(9.80 m/s2)⋅(0.185 m)=16003.626≈441\frac{K}{U_g} = \frac{\frac{1}{2}mv^2}{mgh} = \frac{v^2}{2gh} = \frac{(40.0\text{ m/s})^2}{2 \cdot (9.80\text{ m/s}^2) \cdot (0.185\text{ m})} = \frac{1600}{3.626} \approx 441

This demonstrates that in high-speed rotational systems, the mechanical energy is overwhelmingly dominated by kinetic energy compared to gravitational potential energy.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the prefix milli- with micro- or treats 1 mg as 10⁻³ kg instead of 10⁻⁶ kg.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=45.0×10−3 kg  ⟹  h=0.185 m  ⟹  v=1443.6=40.0 m/sm = 45.0 \times 10^{-3}\text{ kg} \implies h = 0.185\text{ m} \implies v = \frac{144}{3.6} = 40.0\text{ m/s}

    Correct

    m=45.0 mg=45.0×10−6 kg=4.50×10−5 kgm = 45.0\text{ mg} = 45.0 \times 10^{-6}\text{ kg} = 4.50 \times 10^{-5}\text{ kg}, h=0.185 mh = 0.185\text{ m}, v=40.0 m/sv = 40.0\text{ m/s}

    You converted centimeters to meters and kilometers per hour to meters per second correctly. However, 1 mg=10−3 g=10−6 kg1\text{ mg} = 10^{-3}\text{ g} = 10^{-6}\text{ kg}, so 45.0 mg45.0\text{ mg} equals 4.50×10−5 kg4.50 \times 10^{-5}\text{ kg}, not 45.0×10−3 kg45.0 \times 10^{-3}\text{ kg}.

  2. Step 2

    Ug=mgh=(45.0×10−3)(9.80)(0.185)=8.16×10−2 JU_g = mgh = (45.0 \times 10^{-3})(9.80)(0.185) = 8.16 \times 10^{-2}\text{ J}

    Correct

    Ug=mgh=(4.50×10−5 kg)(9.80 m/s2)(0.185 m)=8.16×10−5 JU_g = mgh = (4.50 \times 10^{-5}\text{ kg})(9.80\text{ m/s}^2)(0.185\text{ m}) = 8.16 \times 10^{-5}\text{ J}

    You applied the correct potential energy formula Ug=mghU_g = mgh, but the numerical value was scaled up by a factor of 10310^3 due to the earlier mass conversion error.

  3. Step 3

    K=0.5×(45.0×10−3)×(40.0)2=36.0 JK = 0.5 \times (45.0 \times 10^{-3}) \times (40.0)^2 = 36.0\text{ J}

    Correct

    K=12mv2=12(4.50×10−5 kg)(40.0 m/s)2=3.60×10−2 JK = \frac{1}{2}mv^2 = \frac{1}{2}(4.50 \times 10^{-5}\text{ kg})(40.0\text{ m/s})^2 = 3.60 \times 10^{-2}\text{ J}

    You set up and evaluated the kinetic energy formula correctly, but substituting the incorrect mass value resulted in an answer that is 10310^3 times too large.

  4. Step 4

    KUg=36.08.16×10−2=441\frac{K}{U_g} = \frac{36.0}{8.16 \times 10^{-2}} = 441

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted speed from km/h\text{km/h} to m/s\text{m/s} using the divisor 3.63.6.

You correctly used the formulas Ug=mghU_g = mgh and K=12mv2K = \frac{1}{2}mv^2.

You calculated the dimensionless energy ratio accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error (Prefix Misapplication)

You treated 1 mg1\text{ mg} as 10−3 kg10^{-3}\text{ kg} rather than converting milligrams to grams first and then grams to kilograms.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The prefix 'milli-' means 10−310^{-3} relative to the base unit gram (g\text{g}), not the SI standard base unit kilogram (kg\text{kg}). Because the standard SI unit of mass already contains the prefix 'kilo-', converting from milligrams requires an additional factor of 10−310^{-3}, yielding 1 mg=10−6 kg1\text{ mg} = 10^{-6}\text{ kg}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Two-step mass conversion to SI
  • 1 mg=10−3 g=10−6 kg1\text{ mg} = 10^{-3}\text{ g} = 10^{-6}\text{ kg}

  • Always convert a sub-unit of mass to grams first, then divide by 1,0001{,}000 to reach kilograms.

Ratio cancellation check
  • KUg=12mv2mgh=v22gh\frac{K}{U_g} = \frac{\frac{1}{2}mv^2}{mgh} = \frac{v^2}{2gh}

  • Notice that mass cancels in the ratio, allowing you to compute the ratio directly and verify whether mass errors propagate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. m=45.0 mg=45.0×10−6 kg=4.50×10−5 kgm = 45.0\text{ mg} = 45.0 \times 10^{-6}\text{ kg} = 4.50 \times 10^{-5}\text{ kg}

  2. Ug=mgh=(4.50×10−5 kg)(9.80 m/s2)(0.185 m)=8.16×10−5 JU_g = mgh = (4.50 \times 10^{-5}\text{ kg})(9.80\text{ m/s}^2)(0.185\text{ m}) = 8.16 \times 10^{-5}\text{ J}

  3. K=12mv2=0.5×(4.50×10−5 kg)×(40.0 m/s)2=3.60×10−2 JK = \frac{1}{2}mv^2 = 0.5 \times (4.50 \times 10^{-5}\text{ kg}) \times (40.0\text{ m/s})^2 = 3.60 \times 10^{-2}\text{ J}

  4. KUg=3.60×10−2 J8.1585×10−5 J≈441\frac{K}{U_g} = \frac{3.60 \times 10^{-2}\text{ J}}{8.1585 \times 10^{-5}\text{ J}} \approx 441

Final answer

(a) Ug=8.16×10−5 JU_g = 8.16 \times 10^{-5}\text{ J}; (b) K=3.60×10−2 JK = 3.60 \times 10^{-2}\text{ J}; (c) KUg=441\frac{K}{U_g} = 441

NEXT STEPS
Final Takeaways from Your Teacher
  • Review metric mass prefixes by practicing conversions between mg\text{mg}, g\text{g}, and kg\text{kg}.

  • When dealing with energy ratios, try simplifying algebraically first to see which variables cancel.

  • Complete the three targeted practice problems below to reinforce two-step SI conversions.

OverviewACEpath Teacher's Diagnosis

02 The student uses the velocity in km/h directly without converting to m/s when calculating kinetic energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=4.50×10−5 kg  ⟹  h=0.185 m  ⟹  Ug=(4.50×10−5)(9.80)(0.185)=8.16×10−5 Jm = 4.50 \times 10^{-5}\text{ kg} \implies h = 0.185\text{ m} \implies U_g = (4.50 \times 10^{-5})(9.80)(0.185) = 8.16 \times 10^{-5}\text{ J}

  2. Step 2

    v=144 km/h  ⟹  K=0.5×(4.50×10−5)×(144)2=0.467 Jv = 144\text{ km/h} \implies K = 0.5 \times (4.50 \times 10^{-5}) \times (144)^2 = 0.467\text{ J}

    Correct

    v=144 km/h3.6=40.0 m/s  ⟹  K=12mv2=12(4.50×10−5 kg)(40.0 m/s)2=3.60×10−2 Jv = \frac{144\text{ km/h}}{3.6} = 40.0\text{ m/s} \implies K = \frac{1}{2}mv^2 = \frac{1}{2}(4.50 \times 10^{-5}\text{ kg})(40.0\text{ m/s})^2 = 3.60 \times 10^{-2}\text{ J}

    You substituted the speed directly in km/h\text{km/h} instead of converting to the base SI unit of m/s\text{m/s}. A joule is defined as kg⋅m2/s2\text{kg}\cdot\text{m}^2/\text{s}^2, so speed must always be expressed in m/s\text{m/s}.

  3. Step 3

    KUg=0.4678.16×10−5=5723\frac{K}{U_g} = \frac{0.467}{8.16 \times 10^{-5}} = 5723

    Correct

    KUg=3.60×10−2 J8.16×10−5 J≈441\frac{K}{U_g} = \frac{3.60 \times 10^{-2}\text{ J}}{8.16 \times 10^{-5}\text{ J}} \approx 441

    Your method of dividing kinetic energy by potential energy was completely sound, but the numerical answer is incorrect due to the un-converted velocity from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted both the pellet's mass from milligrams to kilograms and its height from centimeters to meters.

You correctly recalled and applied the gravitational potential energy formula Ug=mghU_g = mgh.

You used the correct algebraic expression for kinetic energy, K=12mv2K = \frac{1}{2}mv^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omitted

You noticed the velocity was given in km/h\text{km/h}, but you substituted 144144 directly into the kinetic energy formula without dividing by 3.63.6 to obtain m/s\text{m/s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that the derived SI energy unit (joules, J=kg⋅m2/s2\text{J} = \text{kg}\cdot\text{m}^2/\text{s}^2) requires velocity to be in meters per second (m/s\text{m/s}), not kilometers per hour (km/h\text{km/h}).

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Velocity Requirement
  • 1 J=1 kg⋅m2/s21\text{ J} = 1\text{ kg}\cdot\text{m}^2/\text{s}^2, which strictly demands velocity in m/s\text{m/s}.

  • Always convert speeds in km/h\text{km/h} to m/s\text{m/s} by dividing by 3.63.6 before substituting into energy or momentum formulas.

Unit Dimensional Analysis
  • [K]=[mass]×[velocity]2[K] = [\text{mass}] \times [\text{velocity}]^2

  • Check your units explicitly: kg×(km/h)2≠J\text{kg} \times (\text{km/h})^2 \neq \text{J}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert velocity to meters per second: v=144 km/h=1443.6 m/s=40.0 m/sv = 144\text{ km/h} = \frac{144}{3.6}\text{ m/s} = 40.0\text{ m/s}.

  2. Recalculate kinetic energy: K=12(4.50×10−5 kg)(40.0 m/s)2=3.60×10−2 JK = \frac{1}{2}(4.50 \times 10^{-5}\text{ kg})(40.0\text{ m/s})^2 = 3.60 \times 10^{-2}\text{ J}.

  3. Calculate the ratio of kinetic to potential energy: KUg=3.60×10−2 J8.1585×10−5 J≈441\frac{K}{U_g} = \frac{3.60 \times 10^{-2}\text{ J}}{8.1585 \times 10^{-5}\text{ J}} \approx 441.

Final answer

(a) Ug=8.16×10−5 JU_g = 8.16 \times 10^{-5}\text{ J}; (b) K=3.60×10−2 JK = 3.60 \times 10^{-2}\text{ J}; (c) KUg=441\frac{K}{U_g} = 441

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the unit of every variable alongside its number before plugging it into an equation.

  • Memorize the quick conversion factor: multiply by 10003600\frac{1000}{3600} (or divide by 3.63.6) to switch from km/h\text{km/h} to m/s\text{m/s}.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the velocity in the kinetic energy formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=4.50×10−5 kgm = 4.50 \times 10^{-5}\text{ kg}, h=0.185 mh = 0.185\text{ m}, v=40.0 m/s  ⟹  Ug=(4.50×10−5)(9.80)(0.185)=8.16×10−5 Jv = 40.0\text{ m/s} \implies U_g = (4.50 \times 10^{-5})(9.80)(0.185) = 8.16 \times 10^{-5}\text{ J}

  2. Step 2

    K=0.5×m×v=0.5×(4.50×10−5)×40.0=9.00×10−4 JK = 0.5 \times m \times v = 0.5 \times (4.50 \times 10^{-5}) \times 40.0 = 9.00 \times 10^{-4}\text{ J}

    Correct

    K=12mv2=0.5×(4.50×10−5 kg)×(40.0 m/s)2=3.60×10−2 JK = \frac{1}{2}mv^2 = 0.5 \times (4.50 \times 10^{-5}\text{ kg}) \times (40.0\text{ m/s})^2 = 3.60 \times 10^{-2}\text{ J}

    You omitted the exponent in the kinetic energy formula, multiplying by vv instead of v2v^2.

  3. Step 3

    KUg=9.00×10−48.16×10−5=11.0\frac{K}{U_g} = \frac{9.00 \times 10^{-4}}{8.16 \times 10^{-5}} = 11.0

    Correct

    KUg=3.60×10−2 J8.16×10−5 J≈441\frac{K}{U_g} = \frac{3.60 \times 10^{-2}\text{ J}}{8.16 \times 10^{-5}\text{ J}} \approx 441

    Your division step was executed properly using your previous result, but the final value was affected by the missing square in the kinetic energy calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted milligrams, centimeters, and kilometers per hour into base SI units accurately.

You correctly applied the gravitational potential energy formula Ug=mghU_g = mgh.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula omission: omitted exponent in kinetic energy

You wrote K=0.5×m×vK = 0.5 \times m \times v instead of squaring velocity as K=12mv2K = \frac{1}{2}mv^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated linear momentum (p=mvp = mv) or an unsquared velocity factor with translational kinetic energy, which depends quadratically on speed (v2v^2) to match energy dimensions (kg⋅m2/s2=J\text{kg}\cdot\text{m}^2/\text{s}^2 = \text{J}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Verification of Energy
  • Every form of energy must have dimensions of [mass]⋅[length]2/[time]2[\text{mass}] \cdot [\text{length}]^2 / [\text{time}]^2, which corresponds to kg⋅m2/s2=J\text{kg}\cdot\text{m}^2/\text{s}^2 = \text{J}.

  • Always verify that your velocity term is squared: multiplying kg×m/s\text{kg} \times \text{m/s} yields momentum (N⋅s\text{N}\cdot\text{s}), not energy (J\text{J}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. K=12mv2=12(4.50×10−5 kg)(40.0 m/s)2=3.60×10−2 JK = \frac{1}{2}mv^2 = \frac{1}{2}(4.50 \times 10^{-5}\text{ kg})(40.0\text{ m/s})^2 = 3.60 \times 10^{-2}\text{ J}

  2. KUg=3.60×10−2 J8.1585×10−5 J≈441\frac{K}{U_g} = \frac{3.60 \times 10^{-2}\text{ J}}{8.1585 \times 10^{-5}\text{ J}} \approx 441

Final answer

(a) Ug=8.16×10−5 JU_g = 8.16 \times 10^{-5}\text{ J}; (b) K=3.60×10−2 JK = 3.60 \times 10^{-2}\text{ J}; (c) KUg=441\frac{K}{U_g} = 441

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the algebraic formula K=12mv2K = \frac{1}{2}mv^2 with the exponent clearly visible before substituting numerical values.

  • Perform a quick unit check whenever calculating energy: ensure speed is squared so that (m/s)2(\text{m/s})^2 combines with kg\text{kg} to give Joules.

Lock it in

Similar question

01

A dust particle with a mass of m=12.0 mgm = 12.0\text{ mg} falls from a shelf at height h=2.50 mh = 2.50\text{ m}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate its gravitational potential energy relative to the floor in joules.

Answer

Ug=2.94×10−4 JU_g = 2.94 \times 10^{-4}\text{ J}. First convert mass: m=12.0 mg=12.0×10−6 kgm = 12.0\text{ mg} = 12.0 \times 10^{-6}\text{ kg}. Then evaluate Ug=mgh=(1.20×10−5 kg)(9.80 m/s2)(2.50 m)=2.94×10−4 JU_g = mgh = (1.20 \times 10^{-5}\text{ kg})(9.80\text{ m/s}^2)(2.50\text{ m}) = 2.94 \times 10^{-4}\text{ J}.

02

A centrifuge sample container has a mass of 80.0 mg80.0\text{ mg} and spins at a tangential speed of 72.0 km/h72.0\text{ km/h}. Calculate its kinetic energy in joules.

Answer

K=1.60×10−2 JK = 1.60 \times 10^{-2}\text{ J}. Convert units: m=80.0×10−6 kg=8.00×10−5 kgm = 80.0 \times 10^{-6}\text{ kg} = 8.00 \times 10^{-5}\text{ kg} and v=72.03.6=20.0 m/sv = \frac{72.0}{3.6} = 20.0\text{ m/s}. Then calculate K=12mv2=0.5×(8.00×10−5 kg)×(20.0 m/s)2=1.60×10−2 JK = \frac{1}{2}mv^2 = 0.5 \times (8.00 \times 10^{-5}\text{ kg}) \times (20.0\text{ m/s})^2 = 1.60 \times 10^{-2}\text{ J}.

03

A micro-bead of mass m=2.50 mgm = 2.50\text{ mg} is launched vertically upward with a speed of v=15.0 m/sv = 15.0\text{ m/s} from a platform h=40.0 cmh = 40.0\text{ cm} above the ground. (a) Determine the bead's total mechanical energy relative to the ground. (b) Find the ratio KUg\frac{K}{U_g} at the launch point.

Answer

(a) E=2.91×10−4 JE = 2.91 \times 10^{-4}\text{ J}; (b) KUg≈28.7\frac{K}{U_g} \approx 28.7. Mass conversion: m=2.50×10−6 kgm = 2.50 \times 10^{-6}\text{ kg}; height: h=0.400 mh = 0.400\text{ m}. Potential energy: Ug=mgh=(2.50×10−6)(9.80)(0.400)=9.80×10−6 JU_g = mgh = (2.50 \times 10^{-6})(9.80)(0.400) = 9.80 \times 10^{-6}\text{ J}. Kinetic energy: K=12mv2=0.5(2.50×10−6)(15.0)2=2.8125×10−4 JK = \frac{1}{2}mv^2 = 0.5(2.50 \times 10^{-6})(15.0)^2 = 2.8125 \times 10^{-4}\text{ J}. Total energy: E=K+Ug=2.91×10−4 JE = K + U_g = 2.91 \times 10^{-4}\text{ J}. Ratio: KUg=v22gh=2252(9.80)(0.400)≈28.7\frac{K}{U_g} = \frac{v^2}{2gh} = \frac{225}{2(9.80)(0.400)} \approx 28.7.

Loading workspace…