Resources

A light ray traveling inside a liquid core optical guide of refractive index n1=1.520n_1 = 1.520 undergoes total internal reflection at the interface with an outer polymer sheath of refractive index n2=1.330n_2 = 1.330. Rather than measuring from the interface normal, calculate the grazing angle (the angle between the incident ray and the planar interface surface itself) corresponding to the critical angle.

Answer and steps

Final answer

θgrazing=29.00∘\theta_{\text{grazing}} = 29.00^\circ.

Steps

Total internal reflection occurs when a light ray traveling in a medium of higher refractive index n1n_1 approaches an interface with a medium of lower refractive index n2n_2 at an incident angle equal to or exceeding the critical angle θc\theta_c.

Step 1: Determine the critical angle θc\theta_c relative to the normal

By Snell's law, the critical angle θc\theta_c (measured relative to the surface normal) corresponds to a refracted angle of 90∘90^\circ:

sin⁡θc=n2n1\sin \theta_c = \frac{n_2}{n_1}

Substitute the given values n1=1.520n_1 = 1.520 and n2=1.330n_2 = 1.330:

sin⁡θc=1.3301.520=0.8750\sin \theta_c = \frac{1.330}{1.520} = 0.8750

Taking the inverse sine gives:

θc=arcsin⁡(0.8750)≈61.00∘\theta_c = \arcsin(0.8750) \approx 61.00^\circ

Step 2: Relate the grazing angle to the critical angle

The grazing angle θgrazing\theta_{\text{grazing}} is defined as the angle between the incident ray and the interface plane itself, whereas the angle of incidence θc\theta_c is measured relative to the line perpendicular (normal) to the interface. Because the normal and the interface form a right angle:

θgrazing+θc=90∘\theta_{\text{grazing}} + \theta_c = 90^\circ

θgrazing=90∘−θc\theta_{\text{grazing}} = 90^\circ - \theta_c

Pitfall: A common error is reporting the standard critical angle θc\theta_c rather than the grazing angle. Always verify whether the angle is requested relative to the interface normal or the interface plane.

Step 3: Calculate the grazing angle

Substitute θc=61.00∘\theta_c = 61.00^\circ:

θgrazing=90∘−61.00∘=29.00∘\theta_{\text{grazing}} = 90^\circ - 61.00^\circ = 29.00^\circ

Equivalently, one can directly compute cos⁡θgrazing=sin⁡θc=0.8750\cos \theta_{\text{grazing}} = \sin \theta_c = 0.8750, yielding θgrazing=29.00∘\theta_{\text{grazing}} = 29.00^\circ.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the critical angle relative to the normal but reports it directly instead of converting to the complementary grazing angle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    sin⁡(θc)=n2n1=1.3301.520  ⟹  sin⁡(θc)=0.8750  ⟹  θc=arcsin⁡(0.8750)=61.04∘\sin(\theta_c) = \frac{n_2}{n_1} = \frac{1.330}{1.520} \implies \sin(\theta_c) = 0.8750 \implies \theta_c = \arcsin(0.8750) = 61.04^\circ

  2. Step 2

    Grazing angle=61.04∘\text{Grazing angle} = 61.04^\circ

    Correct

    θgrazing=90∘−θc=90∘−61.04∘=28.96∘\theta_{\text{grazing}} = 90^\circ - \theta_c = 90^\circ - 61.04^\circ = 28.96^\circ (or 29.00∘29.00^\circ)

    The grazing angle is measured from the interface surface, not the normal. Since the normal is perpendicular to the boundary, the grazing angle is the complement: θgrazing=90∘−θc\theta_{\text{grazing}} = 90^\circ - \theta_c.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the formula for the critical angle at a dielectric boundary.

You accurately computed the ratio of refractive indices and its inverse sine.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Angle Reference Frame Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the angle of incidence (defined relative to the surface normal) with the grazing angle (defined relative to the interface plane itself).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Line Identification
  • Standard optical angles (incidence, reflection, refraction) are measured from the perpendicular normal line, while grazing angles are measured from the tangent/interface surface.

  • Sketch the boundary and normal first, then clearly label both angles before calculating.

Complementary Angle Relationship
  • Because the interface surface and its normal form a 90∘90^\circ angle, θgrazing+θ=90∘\theta_{\text{grazing}} + \theta = 90^\circ.

  • Whenever a problem specifies a grazing angle, subtract the normal-relative angle from 90∘90^\circ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the grazing angle θgrazing\theta_{\text{grazing}} and the critical angle θc\theta_c form a right angle with the interface: θgrazing+θc=90∘\theta_{\text{grazing}} + \theta_c = 90^\circ.

  2. Subtract θc\theta_c from 90∘90^\circ: θgrazing=90∘−61.04∘=28.96∘\theta_{\text{grazing}} = 90^\circ - 61.04^\circ = 28.96^\circ (or 29.00∘29.00^\circ using workbook rounding).

Final answer

θgrazing=29.00∘\theta_{\text{grazing}} = 29.00^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a simple ray diagram showing the boundary, normal, θc\theta_c, and θgrazing\theta_{\text{grazing}} to visually confirm which angle is requested.

  • Practice converting between grazing angles and normal-referenced angles in Snell's law problems.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio of refractive indices when setting up the critical angle formula, dividing the core index by the cladding index.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    sin⁡(θc)=n1n2=1.5201.330  ⟹  sin⁡(θc)=1.143\sin(\theta_c) = \frac{n_1}{n_2} = \frac{1.520}{1.330} \implies \sin(\theta_c) = 1.143

    Correct

    sin⁡(θc)=n2n1=1.3301.520≈0.8750\sin(\theta_c) = \frac{n_2}{n_1} = \frac{1.330}{1.520} \approx 0.8750

    Total internal reflection occurs when light travels from a denser medium (n1n_1) into a less dense medium (n2n_2). From Snell's law, n1sin⁡θc=n2sin⁡(90∘)n_1 \sin \theta_c = n_2 \sin(90^\circ), which gives sin⁡θc=n2n1\sin \theta_c = \frac{n_2}{n_1} rather than n1n2\frac{n_1}{n_2}.

  2. Step 2

    No real angle exists because 1.5201.330>1\frac{1.520}{1.330} > 1, so the grazing angle cannot be determined.

    Correct

    θc=arcsin⁡(0.8750)≈61.00∘  ⟹  θgrazing=90∘−61.00∘=29.00∘\theta_c = \arcsin(0.8750) \approx 61.00^\circ \implies \theta_{\text{grazing}} = 90^\circ - 61.00^\circ = 29.00^\circ

    Because your ratio was inverted in the previous step, your conclusion that no critical angle exists followed logically from an incorrect intermediate value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the sine of a real physical angle must satisfy sin⁡θ≤1\sin \theta \le 1.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted index ratio in critical angle formula

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You placed the incident medium's refractive index (n1n_1) in the numerator instead of the denominator when deriving the critical angle from Snell's law (n1sin⁡θc=n2sin⁡90∘n_1 \sin \theta_c = n_2 \sin 90^\circ).

REASONING PATH
Your ACEpath teacher’s suggested approach
Snell's Law Ratio Check
  • For total internal reflection to occur, light must go from a higher index (nincidentn_{\text{incident}}) to a lower index (nrefractedn_{\text{refracted}}), yielding sin⁡θc=nlowernhigher=n2n1<1\sin \theta_c = \frac{n_{\text{lower}}}{n_{\text{higher}}} = \frac{n_2}{n_1} < 1.

  • Always check that the ratio is strictly less than 11 by placing the smaller refractive index in the numerator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the critical angle relative to the normal: θc=arcsin⁡(1.3301.520)≈61.00∘\theta_c = \arcsin\left(\frac{1.330}{1.520}\right) \approx 61.00^\circ.

  2. Relate the grazing angle to the normal angle of incidence: θgrazing=90∘−θc\theta_{\text{grazing}} = 90^\circ - \theta_c.

  3. Calculate the final grazing angle: θgrazing=90∘−61.00∘=29.00∘\theta_{\text{grazing}} = 90^\circ - 61.00^\circ = 29.00^\circ.

Final answer

θgrazing=29.00∘\theta_{\text{grazing}} = 29.00^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full form of Snell's law (n1sin⁡θ1=n2sin⁡θ2n_1 \sin \theta_1 = n_2 \sin \theta_2) before isolating sin⁡θc\sin \theta_c to avoid index inversion.

  • Remember that the grazing angle is measured from the interface surface, making it complementary to the normal angle of incidence (90∘−θc90^\circ - \theta_c).

OverviewACEpath Teacher's Diagnosis

03 The student directly equates the sine of the grazing angle to the index ratio instead of using the normal angle, setting sin(α) = n₂ / n₁.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    sin⁡(α)=n2n1=1.3301.520  ⟹  sin⁡(α)=0.8750\sin(\alpha) = \frac{n_2}{n_1} = \frac{1.330}{1.520} \implies \sin(\alpha) = 0.8750

    Correct

    sin⁡(θc)=n2n1=1.3301.520=0.8750\sin(\theta_c) = \frac{n_2}{n_1} = \frac{1.330}{1.520} = 0.8750 or cos⁡(θgrazing)=n2n1=0.8750\cos(\theta_{\text{grazing}}) = \frac{n_2}{n_1} = 0.8750

    Snell's law uses angles measured relative to the normal line perpendicular to the interface, so n2n1\frac{n_2}{n_1} equals sin⁡(θc)\sin(\theta_c), where θc\theta_c is the critical angle relative to the normal. Because the grazing angle is measured from the interface surface, its relation is cos⁡(θgrazing)=n2n1\cos(\theta_{\text{grazing}}) = \frac{n_2}{n_1}, not sin⁡\sin.

  2. Step 2

    α=arcsin⁡(0.8750)=61.04∘\alpha = \arcsin(0.8750) = 61.04^\circ

    Correct

    θgrazing=90∘−61.04∘=28.96∘\theta_{\text{grazing}} = 90^\circ - 61.04^\circ = 28.96^\circ (or 29.00∘29.00^\circ)

    Your arithmetic evaluation of arcsin⁡(0.8750)\arcsin(0.8750) is accurate, but this yields the critical angle relative to the normal rather than the requested grazing angle relative to the interface surface.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the refractive index ratio n2n1\frac{n_2}{n_1} needed for the critical condition of total internal reflection.

You accurately computed the decimal ratio and evaluated the inverse sine function.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reference Angle Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the standard angle of incidence (measured from the surface normal) with the grazing angle (measured from the interface surface), directly setting the sine of the grazing angle equal to the index ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Line Check
  • Snell's law angles are strictly defined relative to the normal line perpendicular to the interface.

  • Always draw a sketch with the interface and normal line to confirm whether an angle is measured from the normal or from the surface plane.

Complementary Angle Conversion
  • The grazing angle and the normal angle of incidence are complementary: θgrazing+θ=90∘\theta_{\text{grazing}} + \theta = 90^\circ.

  • When asked for a grazing angle, either compute the normal critical angle first and subtract it from 90∘90^\circ, or directly use cos⁡(θgrazing)=n2n1\cos(\theta_{\text{grazing}}) = \frac{n_2}{n_1}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the critical angle relative to the normal using Snell's law: sin⁡(θc)=n2n1=1.3301.520=0.8750\sin(\theta_c) = \frac{n_2}{n_1} = \frac{1.330}{1.520} = 0.8750.

  2. Calculate the normal critical angle: θc=arcsin⁡(0.8750)≈61.00∘\theta_c = \arcsin(0.8750) \approx 61.00^\circ (or 61.04∘61.04^\circ).

  3. Convert to the grazing angle using the complementary relationship with the interface: θgrazing=90∘−θc=90∘−61.00∘=29.00∘\theta_{\text{grazing}} = 90^\circ - \theta_c = 90^\circ - 61.00^\circ = 29.00^\circ.

Final answer

θgrazing=29.00∘\theta_{\text{grazing}} = 29.00^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch ray diagrams with both the normal line and the surface labeled whenever solving optics problems.

  • Practice distinguishing grazing angles from standard angles of incidence across reflection and refraction exercises.

Lock it in

Similar question

01

A core-cladding optical fiber has a core index n1=1.50n_1 = 1.50 and a cladding index n2=1.44n_2 = 1.44. Find the maximum grazing angle at the core-cladding boundary that allows total internal reflection along the fiber.

Answer

θg,max=16.26∘\theta_{g,\text{max}} = 16.26^\circ. Key steps: (1) Find critical angle from normal: sin⁡θc=1.441.50=0.96  ⟹  θc=arcsin⁡(0.96)≈73.74∘\sin\theta_c = \frac{1.44}{1.50} = 0.96 \implies \theta_c = \arcsin(0.96) \approx 73.74^\circ. (2) Total internal reflection occurs for incident angles θ≥θc\theta \ge \theta_c, which corresponds to grazing angles θg≤90∘−θc\theta_g \le 90^\circ - \theta_c. (3) θg,max=90∘−73.74∘=16.26∘\theta_{g,\text{max}} = 90^\circ - 73.74^\circ = 16.26^\circ.

02

A glass prism (n=1.60n = 1.60) is immersed in water (n=1.33n = 1.33). A ray inside the glass approaches the flat glass-water boundary at a grazing angle of 30.0∘30.0^\circ. Does the ray undergo total internal reflection?

Answer

No. Key steps: (1) Convert grazing angle to incidence angle relative to the normal: θi=90.0∘−30.0∘=60.0∘\theta_i = 90.0^\circ - 30.0^\circ = 60.0^\circ. (2) Compute critical angle: sin⁡θc=1.331.60≈0.8313  ⟹  θc≈56.23∘\sin\theta_c = \frac{1.33}{1.60} \approx 0.8313 \implies \theta_c \approx 56.23^\circ. (3) Since θi=60.0∘>56.23∘\theta_i = 60.0^\circ > 56.23^\circ, the ray is steeper than the critical angle relative to normal, meaning it undergoes total internal reflection. Wait: θi=60∘>56.23∘\theta_i = 60^\circ > 56.23^\circ satisfies total internal reflection! Result: Yes, it undergoes total internal reflection.

03

A step-index fiber with core index ncore=1.48n_{\text{core}} = 1.48 is designed so that rays with a grazing angle up to 12.0∘12.0^\circ at the core-cladding boundary undergo total internal reflection. What is the maximum allowable refractive index of the cladding, ncladn_{\text{clad}}?

Answer

nclad=1.448n_{\text{clad}} = 1.448. Key steps: (1) The minimum incident angle relative to normal is θc=90.0∘−12.0∘=78.0∘\theta_c = 90.0^\circ - 12.0^\circ = 78.0^\circ. (2) At critical condition, sin⁡θc=ncladncore\sin\theta_c = \frac{n_{\text{clad}}}{n_{\text{core}}}. (3) nclad=1.48×sin⁡(78.0∘)=1.48×0.97815≈1.448n_{\text{clad}} = 1.48 \times \sin(78.0^\circ) = 1.48 \times 0.97815 \approx 1.448.

Loading workspace…