Resources

A biomedical centrifuge carries a test sample tube of mass m=45.0 gm = 45.0\text{ g} in a horizontal circular rotor arm at a radial distance r=18.0 cmr = 18.0\text{ cm} from the central rotation axis. The rotor spins at a constant speed of 2400 rpm2400\text{ rpm} (revolutions per minute). In the non-equilibrium rotating reference frame of the laboratory, the sample is in dynamic circular motion governed by radial net force. Convert all parameters to standard SI units and calculate the centripetal acceleration aca_c of the tube in m/s2\text{m/s}^2 and the required net radial inward force ΣFr\Sigma F_r in newtons (N\text{N}) exerted by the carrier bracket.

Answer and steps

Final answer

ac=1.14×104 m/s2a_c = 1.14 \times 10^4\text{ m/s}^2, ΣFr=512 N\Sigma F_r = 512\text{ N}

Steps

01

Convert Given Quantities to SI Base Units

Before applying circular motion equations, express each physical quantity in standard SI units:

  • Mass (mm): m=45.0 g=45.0×10−3 kg=0.0450 kgm = 45.0\text{ g} = 45.0 \times 10^{-3}\text{ kg} = 0.0450\text{ kg}
  • Radius (rr): r=18.0 cm=0.180 mr = 18.0\text{ cm} = 0.180\text{ m}
  • Angular Velocity (ω\omega): The rotor turns at a rotational frequency of 2400 rpm2400\text{ rpm}. Convert revolutions per minute to radians per second (rad/s\text{rad/s}): ω=2400 rev/min×2π rad1 rev×1 min60 s=80π rad/s≈251.33 rad/s\omega = 2400\text{ rev/min} \times \frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}} = 80\pi\text{ rad/s} \approx 251.33\text{ rad/s}

02

Calculate Centripetal Acceleration (aca_c)

For an object moving in a uniform circle of radius rr at an angular speed ω\omega, the acceleration points radially inward toward the rotation axis and is given by:

ac=ω2ra_c = \omega^2 r

Substitute the SI values into the equation:

ac=(80π rad/s)2⋅(0.180 m)=6400π2⋅0.180 m/s2=1152π2 m/s2a_c = (80\pi\text{ rad/s})^2 \cdot (0.180\text{ m}) = 6400\pi^2 \cdot 0.180\text{ m/s}^2 = 1152\pi^2\text{ m/s}^2

Evaluating the numerical value:

ac≈11370 m/s2≈1.14×104 m/s2a_c \approx 11370\text{ m/s}^2 \approx 1.14 \times 10^4\text{ m/s}^2


03

Calculate the Net Radial Force (ΣFr\Sigma F_r)

According to Newton's second law, an acceleration must be produced by a net force directed in the same direction. For dynamic circular motion in the horizontal plane, the carrier bracket must provide a net radial inward (centripetal) force:

ΣFr=mac\Sigma F_r = m a_c

Substitute the mass and calculated centripetal acceleration:

ΣFr=(0.0450 kg)⋅(11370 m/s2)≈511.65 N≈512 N\Sigma F_r = (0.0450\text{ kg}) \cdot (11370\text{ m/s}^2) \approx 511.65\text{ N} \approx 512\text{ N}

Common Pitfall: Forgetting to convert the rotational frequency from rpm\text{rpm} to rad/s\text{rad/s} or omitting the factor of 2π2\pi is a frequent source of error. Always verify that ω\omega has units of rad/s\text{rad/s} so that ω2r\omega^2 r produces consistent acceleration units of m/s2\text{m/s}^2.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the angular velocity in the centripetal acceleration formula, calculating a_c = ω r instead of ω² r.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r=0.180 m  ⟹  ω=2400×2π60=80π rad/s≈251.3 rad/sr = 0.180\text{ m} \implies \omega = 2400 \times \frac{2\pi}{60} = 80\pi\text{ rad/s} \approx 251.3\text{ rad/s}

  2. Step 2

    ac=ωr=251.3×0.180=45.2 m/s2a_c = \omega r = 251.3 \times 0.180 = 45.2\text{ m/s}^2

    Correct

    ac=ω2r=(80π rad/s)2×0.180 m≈1.14×104 m/s2a_c = \omega^2 r = (80\pi\text{ rad/s})^2 \times 0.180\text{ m} \approx 1.14 \times 10^4\text{ m/s}^2

    You calculated linear tangential speed v=ωrv = \omega r instead of centripetal acceleration ac=ω2ra_c = \omega^2 r. Remember to square the angular velocity ω\omega.

  3. Step 3

    m=0.0450 kg  ⟹  ΣFr=mac=0.0450×45.2=2.03 Nm = 0.0450\text{ kg} \implies \Sigma F_r = m a_c = 0.0450 \times 45.2 = 2.03\text{ N}

    Correct

    ΣFr=mac=(0.0450 kg)(11370 m/s2)≈512 N\Sigma F_r = m a_c = (0.0450\text{ kg})(11370\text{ m/s}^2) \approx 512\text{ N}

    Your conversion of mass to kilograms and your application of ΣFr=mac\Sigma F_r = m a_c were mathematically sound, but the result was thrown off by the incorrect acceleration from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted centimeters to meters and grams to kilograms accurately.

You correctly used the conversion factor 2π60\frac{2\pi}{60} to obtain the angular speed in rad/s\text{rad/s}.

You properly applied Newton's second law ΣFr=mac\Sigma F_r = m a_c to relate acceleration and radial net force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between linear speed and centripetal acceleration

You omitted the exponent of 22 on the angular velocity ω\omega when computing centripetal acceleration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the tangential speed formula v=ωrv = \omega r with the centripetal acceleration formula ac=ω2r=v2ra_c = \omega^2 r = \frac{v^2}{r}, leading to an acceleration that is missing a factor of ω\omega.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional check for acceleration
  • Angular velocity has units of rad/s\text{rad/s} (or s−1\text{s}^{-1}). Multiplying by radius rr (m\text{m}) yields m/s\text{m/s} (speed), not m/s2\text{m/s}^2 (acceleration).

  • Always verify that your acceleration formula has units of m/s2\text{m/s}^2: (s−1)2×m=m/s2(\text{s}^{-1})^2 \times \text{m} = \text{m/s}^2.

Centripetal acceleration formula selection
  • In terms of angular speed, ac=ω2ra_c = \omega^2 r. In terms of linear speed, ac=v2ra_c = \frac{v^2}{r}.

  • When working with ω\omega, write down ac=ω2ra_c = \omega^2 r explicitly before plugging in values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Square the angular velocity: ω2=(80π rad/s)2=6400π2 rad2/s2≈63165.5 s−2\omega^2 = (80\pi\text{ rad/s})^2 = 6400\pi^2\text{ rad}^2/\text{s}^2 \approx 63165.5\text{ s}^{-2}.

  2. Multiply by the radial distance: ac=ω2r=6400π2×0.180 m=1152π2 m/s2≈1.14×104 m/s2a_c = \omega^2 r = 6400\pi^2 \times 0.180\text{ m} = 1152\pi^2\text{ m/s}^2 \approx 1.14 \times 10^4\text{ m/s}^2.

  3. Compute the net inward force: ΣFr=mac=(0.0450 kg)×(11370 m/s2)≈512 N\Sigma F_r = m a_c = (0.0450\text{ kg}) \times (11370\text{ m/s}^2) \approx 512\text{ N}.

Final answer

ac≈1.14×104 m/s2a_c \approx 1.14 \times 10^4\text{ m/s}^2, ΣFr≈512 N\Sigma F_r \approx 512\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a quick unit check on derived kinematic formulas before substituting numerical values.

  • Practice distinguishing the formulas for linear speed (v=ωrv = \omega r) and centripetal acceleration (ac=ω2ra_c = \omega^2 r).

  • Re-evaluate the centripetal force using the corrected acceleration to see the dramatic difference in scale.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 2π when converting rpm to rad/s, calculating angular velocity simply as revolutions per second.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r=0.180 m  ⟹  ω=240060=40 rad/sr = 0.180\text{ m} \implies \omega = \frac{2400}{60} = 40\text{ rad/s}

    Correct

    r=0.180 m  ⟹  ω=2400 rev/min×2π rad1 rev×1 min60 s=80π rad/s≈251.3 rad/sr = 0.180\text{ m} \implies \omega = 2400\text{ rev/min} \times \frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}} = 80\pi\text{ rad/s} \approx 251.3\text{ rad/s}

    You converted minutes to seconds by dividing by 6060, which gives the frequency in revolutions per second (40 rev/s40\text{ rev/s} or Hz\text{Hz}), but you did not multiply by 2π rad/rev2\pi\text{ rad/rev} to obtain angular velocity ω\omega in radians per second.

  2. Step 2

    ac=ω2r=402×0.180=288 m/s2a_c = \omega^2 r = 40^2 \times 0.180 = 288\text{ m/s}^2

    Correct

    ac=ω2r=(80π rad/s)2×0.180 m≈1.14×104 m/s2a_c = \omega^2 r = (80\pi\text{ rad/s})^2 \times 0.180\text{ m} \approx 1.14 \times 10^4\text{ m/s}^2

    Your formula ac=ω2ra_c = \omega^2 r is completely correct, but substituting your earlier value of ω=40 rad/s\omega = 40\text{ rad/s} carried the conversion error into your acceleration result.

  3. Step 3

    m=0.0450 kg  ⟹  ΣFr=mac=0.0450×288=13.0 Nm = 0.0450\text{ kg} \implies \Sigma F_r = m a_c = 0.0450 \times 288 = 13.0\text{ N}

    Correct

    m=0.0450 kg  ⟹  ΣFr=mac=0.0450 kg×11370 m/s2≈512 Nm = 0.0450\text{ kg} \implies \Sigma F_r = m a_c = 0.0450\text{ kg} \times 11370\text{ m/s}^2 \approx 512\text{ N}

    You converted mass to kilograms and applied Newton's second law ΣFr=mac\Sigma F_r = m a_c correctly, but the result was affected by the upstream acceleration value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the radius from centimeters to meters and the mass from grams to kilograms.

You selected the correct formula ac=ω2ra_c = \omega^2 r for centripetal acceleration.

You correctly applied Newton's second law ΣFr=mac\Sigma F_r = m a_c to determine the net inward radial force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing 2π factor in rpm-to-rad/s unit conversion

You divided by 6060 to switch from minutes to seconds, but forgot that each complete revolution equals 2π2\pi radians.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing rotational frequency (ff in rev/s\text{rev/s}) with angular velocity (ω\omega in rad/s\text{rad/s}). Formulas such as ac=ω2ra_c = \omega^2 r require ω\omega strictly in radians per second.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert Rotational Speed to Angular Velocity
  • ω=rpm×2π60\omega = \frac{\text{rpm} \times 2\pi}{60}

  • Always multiply revolutions by 2π2\pi radians before dividing by 60 seconds whenever an equation requires ω\omega.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ω=2400×2π60=80π rad/s≈251.33 rad/s\omega = 2400 \times \frac{2\pi}{60} = 80\pi\text{ rad/s} \approx 251.33\text{ rad/s}

  2. ac=ω2r=(80π)2×0.180=1152π2≈1.14×104 m/s2a_c = \omega^2 r = (80\pi)^2 \times 0.180 = 1152\pi^2 \approx 1.14 \times 10^4\text{ m/s}^2

  3. ΣFr=mac=0.0450 kg×11370 m/s2≈512 N\Sigma F_r = m a_c = 0.0450\text{ kg} \times 11370\text{ m/s}^2 \approx 512\text{ N}

Final answer

ac=1.14×104 m/s2a_c = 1.14 \times 10^4\text{ m/s}^2, ΣFr=512 N\Sigma F_r = 512\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full unit cancellation fraction 2π rad1 rev×1 min60 s\frac{2\pi\text{ rad}}{1\text{ rev}} \times \frac{1\text{ min}}{60\text{ s}} whenever you see rpm\text{rpm}.

  • Perform a quick mental check: ω\omega in rad/s\text{rad/s} should always be about 6.286.28 times larger than frequency ff in rev/s\text{rev/s}.

OverviewACEpath Teacher's Diagnosis

03 The student leaves the radius in centimeters rather than converting it to meters, resulting in values that are two orders of magnitude too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ω=2400×2π60=80π rad/s≈251.3 rad/s\omega = 2400 \times \frac{2\pi}{60} = 80\pi\text{ rad/s} \approx 251.3\text{ rad/s}

  2. Step 2

    r=18.0 cm  ⟹  ac=ω2r=(251.3)2×18.0=1.14×106 m/s2r = 18.0\text{ cm} \implies a_c = \omega^2 r = (251.3)^2 \times 18.0 = 1.14 \times 10^6\text{ m/s}^2

    Correct

    r=0.180 m  ⟹  ac=ω2r=(251.3 rad/s)2×0.180 m≈1.14×104 m/s2r = 0.180\text{ m} \implies a_c = \omega^2 r = (251.3\text{ rad/s})^2 \times 0.180\text{ m} \approx 1.14 \times 10^4\text{ m/s}^2

    You left the radius in centimeters (18.018.0) rather than converting it to the SI base unit of meters (0.180 m0.180\text{ m}), which produced a result 100100 times too large.

  3. Step 3

    m=0.0450 kg  ⟹  ΣFr=mac=0.0450×1.14×106=51300 Nm = 0.0450\text{ kg} \implies \Sigma F_r = m a_c = 0.0450 \times 1.14 \times 10^6 = 51300\text{ N}

    Correct

    ΣFr=mac=(0.0450 kg)(1.14×104 m/s2)≈512 N\Sigma F_r = m a_c = (0.0450\text{ kg})(1.14 \times 10^4\text{ m/s}^2) \approx 512\text{ N}

    Your formula and mass conversion were correct, but the calculated force inherited the error from the centripetal acceleration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the angular speed from revolutions per minute to radians per second.

You correctly converted the mass from grams to kilograms.

You selected the correct dynamical formulas ac=ω2ra_c = \omega^2 r and ΣFr=mac\Sigma F_r = m a_c.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion

You forgot to convert the radial distance from centimeters to meters before substituting it into the acceleration formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inconsistent handling of metric prefixes when preparing given quantities for standard SI dynamic equations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert All Distance Quantities to Meters
  • Newtonian force and acceleration formulas (extN=extkg⋅extm/s2 ext{N} = ext{kg}\cdot ext{m/s}^2) require length dimensions in meters, not centimeters or millimeters.

  • Always rewrite lengths using the factor 1 cm=10−2 m=0.01 m1\text{ cm} = 10^{-2}\text{ m} = 0.01\text{ m} during the initial given-values setup.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. r=18.0 cm=0.180 mr = 18.0\text{ cm} = 0.180\text{ m}

  2. ac=ω2r=(251.33 rad/s)2×0.180 m≈1.14×104 m/s2a_c = \omega^2 r = (251.33\text{ rad/s})^2 \times 0.180\text{ m} \approx 1.14 \times 10^4\text{ m/s}^2

  3. ΣFr=mac=(0.0450 kg)(1.137×104 m/s2)≈512 N\Sigma F_r = m a_c = (0.0450\text{ kg})(1.137 \times 10^4\text{ m/s}^2) \approx 512\text{ N}

Final answer

ac=1.14×104 m/s2a_c = 1.14 \times 10^4\text{ m/s}^2, ΣFr=512 N\Sigma F_r = 512\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Create a dedicated 'SI Unit Check' line at the top of every mechanics problem to convert cm→m\text{cm} \to \text{m} and g→kg\text{g} \to \text{kg} before writing formulas.

  • Verify dimensional consistency by checking that ω2r=(rad/s)2⋅m=m/s2\omega^2 r = (\text{rad/s})^2 \cdot \text{m} = \text{m/s}^2.

Lock it in

Similar question

01

A small washer rests on a turntable 0.20 m0.20\text{ m} from the spindle. The turntable rotates at a constant angular speed of ω=6.0 rad/s\omega = 6.0\text{ rad/s}. Calculate the magnitude of the centripetal acceleration of the washer.

Answer

ac=7.2 m/s2a_c = 7.2\text{ m/s}^2. Using ac=ω2ra_c = \omega^2 r, calculate ac=(6.0 rad/s)2×0.20 m=36×0.20=7.2 m/s2a_c = (6.0\text{ rad/s})^2 \times 0.20\text{ m} = 36 \times 0.20 = 7.2\text{ m/s}^2.

02

An ultracentrifuge rotor spins at 30000 rpm30000\text{ rpm}. A biological sample is located at a distance of r=8.0 cmr = 8.0\text{ cm} from the axis of rotation. Find the angular speed ω\omega in rad/s\text{rad/s} and the centripetal acceleration aca_c in m/s2\text{m/s}^2.

Answer

ω≈3142 rad/s\omega \approx 3142\text{ rad/s}, ac≈7.9×105 m/s2a_c \approx 7.9 \times 10^5\text{ m/s}^2. First, convert ω=30000×2π60=1000π rad/s≈3142 rad/s\omega = 30000 \times \frac{2\pi}{60} = 1000\pi\text{ rad/s} \approx 3142\text{ rad/s} and r=0.080 mr = 0.080\text{ m}. Then compute ac=ω2r=(1000π)2×0.080≈7.90×105 m/s2a_c = \omega^2 r = (1000\pi)^2 \times 0.080 \approx 7.90 \times 10^5\text{ m/s}^2.

03

A 0.250 kg0.250\text{ kg} mass is attached to a string and swung in a horizontal circle of radius 0.60 m0.60\text{ m} at a constant speed, completing 3.03.0 full revolutions per second. Determine the angular velocity ω\omega, centripetal acceleration aca_c, and the tension TT in the string (neglecting gravity).

Answer

ω=18.8 rad/s\omega = 18.8\text{ rad/s}, ac≈213 m/s2a_c \approx 213\text{ m/s}^2, T≈53.3 NT \approx 53.3\text{ N}. The frequency is f=3.0 rev/sf = 3.0\text{ rev/s}, so ω=2πf=6π rad/s≈18.85 rad/s\omega = 2\pi f = 6\pi\text{ rad/s} \approx 18.85\text{ rad/s}. The centripetal acceleration is ac=ω2r=(6π)2×0.60=21.6π2≈213.2 m/s2a_c = \omega^2 r = (6\pi)^2 \times 0.60 = 21.6\pi^2 \approx 213.2\text{ m/s}^2. The required inward force is provided by tension: T=mac=0.250 kg×213.2 m/s2≈53.3 NT = m a_c = 0.250\text{ kg} \times 213.2\text{ m/s}^2 \approx 53.3\text{ N}.

Loading workspace…