Resources

A monochromatic laser beam with a wavelength of λ1=589 nm\lambda_1 = 589\text{ nm} in air (n1=1.000n_1 = 1.000) enters an optoelectronic glass substrate having a refractive index of n2=1.620n_2 = 1.620. (a) State whether the wave's frequency ff increases, decreases, or remains constant, and justify your answer based on physical boundary continuity. (b) Compute the wave speed v2v_2 in the glass and the new wavelength λ2\lambda_2 within the substrate.

Answer and steps

Final answer

(a) ff remains strictly constant (f=5.09×1014 Hzf = 5.09\times 10^{14}\text{ Hz}) because temporal phase continuity requires wave crests crossing the interface per second to be conserved; (b) v2=1.85×108 m/sv_2 = 1.85\times 10^8\text{ m/s}, λ2=364 nm\lambda_2 = 364\text{ nm}

Steps

01

Wave Speed in Glass (v2v_2)

Part (a): Frequency across a Medium Boundary

The frequency ff of a wave remains constant when moving from air into glass. Physical Justification:

  1. Source dependence: Frequency is set entirely by the oscillation rate of the emitting source (the laser cavity).
  2. Boundary continuity: At the planar interface between air and the glass substrate, electromagnetic fields must satisfy boundary continuity conditions. If the frequency differed on either side of the boundary, wavefronts (or crests) would continually accumulate or vanish at the interface over time. To maintain temporal continuity and phase matching at every instant, the number of wave crests arriving at the surface per second from the air must equal the number of wave crests entering the glass per second. We can calculate this constant frequency using the relationship v=fλv = f \lambda in air: f=v1λ1=cn1λ1f = \frac{v_1}{\lambda_1} = \frac{c}{n_1 \lambda_1} Using the speed of light in vacuum c≈3.00×108 m/sc \approx 3.00 \times 10^8\text{ m/s}: f=3.00×108 m/s1.000⋅(589×10−9 m)≈5.09×1014 Hzf = \frac{3.00 \times 10^8\text{ m/s}}{1.000 \cdot (589 \times 10^{-9}\text{ m})} \approx 5.09 \times 10^{14}\text{ Hz}

Part (b): Wave Speed and Wavelength in the Glass Substrate

The speed of light in a transparent dielectric is inversely proportional to the refractive index of the medium:

v2=cn2v_2 = \frac{c}{n_2}

Substitute the given values:

v2=3.00×108 m/s1.620≈1.85×108 m/sv_2 = \frac{3.00 \times 10^8\text{ m/s}}{1.620} \approx 1.85 \times 10^8\text{ m/s}

02

Wavelength in Glass (λ2\lambda_2)

Because the frequency ff remains unchanged, the decrease in wave speed directly leads to a proportional decrease in wavelength:

λ2=v2f=c/n2c/(n1λ1)=λ1⋅n1n2\lambda_2 = \frac{v_2}{f} = \frac{c / n_2}{c / (n_1 \lambda_1)} = \frac{\lambda_1 \cdot n_1}{n_2}

Given n1=1.000n_1 = 1.000:

λ2=λ1n2=589 nm1.620≈364 nm\lambda_2 = \frac{\lambda_1}{n_2} = \frac{589\text{ nm}}{1.620} \approx 364\text{ nm}

Common Pitfall: A frequent error is assuming that the laser's color/frequency shifts when entering a medium. Always remember that frequency is invariant across media boundaries, while both wave speed and wavelength decrease by a factor of nn.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student incorrectly assumes that wavelength remains constant while frequency decreases inside a denser medium, leading to an incorrect frequency calculation instead of finding the shortened wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Frequency decreases because the medium is denser and slows the wave oscillations down. The wave slows down, so ff decreases across the boundary.

    Correct

    The frequency ff remains strictly constant because temporal phase continuity requires the rate of wavefront arrival to equal the rate of wavefront transmission across the boundary.

    You treated wave speed as directly altering oscillation frequency. In reality, frequency is fixed by the source, and temporal continuity at the boundary forbids wavefronts from accumulating or disappearing.

  2. Step 2

    v2=cn2=3.00×108 m/s1.620=1.85×108 m/sv_2 = \frac{c}{n_2} = \frac{3.00\times 10^8\text{ m/s}}{1.620} = 1.85\times 10^8\text{ m/s}

  3. Step 3

    λ2=λ1=589 nm\lambda_2 = \lambda_1 = 589\text{ nm}

    Correct

    λ2=v2f=λ1n2=589 nm1.620≈364 nm\lambda_2 = \frac{v_2}{f} = \frac{\lambda_1}{n_2} = \frac{589\text{ nm}}{1.620} \approx 364\text{ nm}

    Because frequency ff remains constant while the wave slows down from cc to v2v_2, the wavelength must contract according to λ2=λ1n2\lambda_2 = \frac{\lambda_1}{n_2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the relationship between refractive index and wave speed.

You accurately evaluated v2=cn2v_2 = \frac{c}{n_2} to obtain 1.85×108 m/s1.85\times 10^8\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wave Boundary Invariance Misconception

Assuming that a drop in wave speed reduces temporal oscillation frequency rather than spatial wavelength.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing source-dependent temporal properties (frequency and period) with medium-dependent spatial properties (speed and wavelength). Frequency is dictated solely by the source oscillator and preserved across interfaces by boundary continuity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Frequency Conservation Across Boundaries
  • Temporal boundary conditions require wave crests entering an interface per second to match those leaving; therefore, frequency ff never changes across media.

  • Hold frequency constant when transitioning between media and absorb all changes in wave speed into the wavelength.

Wavelength Scaling with Refractive Index
  • Since v=cnv = \frac{c}{n} and f=constantf = \text{constant}, the wavelength scales inversely with the refractive index: λn=λ0n\lambda_n = \frac{\lambda_0}{n}.

  • Divide the vacuum/air wavelength by the refractive index of the new medium rather than leaving it unchanged.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the frequency invariant: f2=f1=cλ1=3.00×108 m/s589×10−9 m≈5.09×1014 Hzf_2 = f_1 = \frac{c}{\lambda_1} = \frac{3.00\times 10^8\text{ m/s}}{589\times 10^{-9}\text{ m}} \approx 5.09\times 10^{14}\text{ Hz}.

  2. Apply the wave relation in the new medium: λ2=v2f=λ1n2\lambda_2 = \frac{v_2}{f} = \frac{\lambda_1}{n_2}.

  3. Substitute the given values: λ2=589 nm1.620≈363.58 nm≈364 nm\lambda_2 = \frac{589\text{ nm}}{1.620} \approx 363.58\text{ nm} \approx 364\text{ nm}.

Final answer

(a) ff remains constant; (b) v2=1.85×108 m/sv_2 = 1.85\times 10^8\text{ m/s}, λ2=364 nm\lambda_2 = 364\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical argument for boundary continuity: wavefronts cannot pile up or tear apart at an interface.

  • Practice using λn=λn\lambda_n = \frac{\lambda}{n} directly whenever calculating wavelength changes in transparent media.

  • Solve problems where light passes through multiple layers to reinforce that ff remains invariant throughout.

OverviewACEpath Teacher's Diagnosis

02 A student mistakenly multiplies the initial wavelength by the refractive index instead of dividing by it, incorrectly concluding that wavelength increases in a denser medium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Frequency remains constant because the oscillating electric field must remain continuous across the interface.

  2. Step 2

    v2=cn2=3.00×108 m/s1.620=1.85×108 m/sv_2 = \frac{c}{n_2} = \frac{3.00 \times 10^8\text{ m/s}}{1.620} = 1.85 \times 10^8\text{ m/s}

  3. Step 3

    λ2=n2⋅λ1=1.620×589 nm=954 nm\lambda_2 = n_2 \cdot \lambda_1 = 1.620 \times 589\text{ nm} = 954\text{ nm}

    Correct

    λ2=λ1n2=589 nm1.620≈364 nm\lambda_2 = \frac{\lambda_1}{n_2} = \frac{589\text{ nm}}{1.620} \approx 364\text{ nm}

    Because wave speed decreases (v2=v1/n2v_2 = v_1 / n_2) while frequency ff remains constant, the wave relationship v=fλv = f\lambda requires the wavelength to compress proportionally, so λ2=λ1n2\lambda_2 = \frac{\lambda_1}{n_2} rather than λ1⋅n2\lambda_1 \cdot n_2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that wave frequency is strictly determined by the source and invariant across boundaries.

You correctly cited electric field continuity across the interface as the physical justification for constant frequency.

You applied the refractive index formula accurately to determine the wave speed in the optical medium.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse relationship inverted

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the proportional relationship between wavelength and refractive index, multiplying by n2n_2 instead of recognizing that wave compression in an optically denser medium causes wavelength to decrease as λ=vf=cnf=λ0n\lambda = \frac{v}{f} = \frac{c}{n f} = \frac{\lambda_0}{n}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Relate wavelength directly to wave speed
  • When frequency ff is constant, λ\lambda is directly proportional to wave speed: λ=vf\lambda = \frac{v}{f}.

  • Check whether the wave is speeding up or slowing down; if speed decreases in a medium (n>1n > 1), wavelength must decrease.

Verify with physical intuition
  • Light travels slower in optically denser media (n>1n > 1), bunching wave crests closer together.

  • Confirm that your calculated wavelength inside any medium with n>1n > 1 is shorter than its vacuum wavelength.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that v=fλv = f\lambda, which gives λ2=v2f\lambda_2 = \frac{v_2}{f}.

  2. Substitute v2=cn2v_2 = \frac{c}{n_2} and f=cλ1f = \frac{c}{\lambda_1} into the wavelength expression: λ2=c/n2c/λ1=λ1n2\lambda_2 = \frac{c / n_2}{c / \lambda_1} = \frac{\lambda_1}{n_2}.

  3. Divide the initial wavelength by the refractive index: λ2=589 nm1.620≈364 nm\lambda_2 = \frac{589\text{ nm}}{1.620} \approx 364\text{ nm}.

Final answer

(a) ff remains constant (5.09×1014 Hz5.09 \times 10^{14}\text{ Hz}) due to phase and boundary field continuity; (b) v2=1.85×108 m/sv_2 = 1.85 \times 10^8\text{ m/s}, λ2=364 nm\lambda_2 = 364\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation connecting λn=λ0n\lambda_n = \frac{\lambda_0}{n} from v=fλv = f\lambda.

  • Practice calculating wave properties for transitions between two media where neither refractive index is 1.0001.000 using λ1λ2=n2n1\frac{\lambda_1}{\lambda_2} = \frac{n_2}{n_1}.

OverviewACEpath Teacher's Diagnosis

03 A student incorrectly multiplies the speed of light by the index of refraction to find the wave speed, resulting in an unphysical speed greater than c.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Frequency remains constant because wavefronts cannot pile up or disappear at the boundary.

  2. Step 2

    v2=c⋅n2=(3.00×108 m/s)×1.620=4.86×108 m/sv_2 = c \cdot n_2 = (3.00 \times 10^8\text{ m/s}) \times 1.620 = 4.86 \times 10^8\text{ m/s}

    Correct

    v2=cn2=3.00×108 m/s1.620≈1.85×108 m/sv_2 = \frac{c}{n_2} = \frac{3.00 \times 10^8\text{ m/s}}{1.620} \approx 1.85 \times 10^8\text{ m/s}

    You multiplied the vacuum speed of light cc by n2n_2 instead of dividing by it. The refractive index is defined as n=cvn = \frac{c}{v}, so light always slows down in a dielectric medium where n>1n > 1.

  3. Step 3

    λ2=λ1n2=589 nm1.620=364 nm\lambda_2 = \frac{\lambda_1}{n_2} = \frac{589\text{ nm}}{1.620} = 364\text{ nm}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the wave frequency does not change across a medium boundary.

You provided a strong physical boundary argument noting that wavefronts cannot accumulate or disappear at the interface.

You correctly applied the wavelength reduction formula λ2=λ1n2\lambda_2 = \frac{\lambda_1}{n_2} to find λ2=364 nm\lambda_2 = 364\text{ nm}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect algebraic inversion of refractive index formula

You accidentally wrote v=c⋅nv = c \cdot n instead of v=cnv = \frac{c}{n}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the relationship between index of refraction and wave speed. Since n=cv≥1n = \frac{c}{v} \ge 1 for ordinary transparent media, light must slow down upon entering an optically denser medium (v=cn<cv = \frac{c}{n} < c), rather than speed up beyond the speed of light in vacuum.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality Check for Wave Speed
  • For any transparent medium with n>1n > 1, the speed of light inside the medium cannot exceed c≈3.00×108 m/sc \approx 3.00 \times 10^8\text{ m/s}.

  • Whenever you compute a speed of light in matter, check that v<cv < c. If your result exceeds 3.00×108 m/s3.00 \times 10^8\text{ m/s}, verify whether you multiplied instead of divided by nn.

Definition of Refractive Index
  • n=cv  ⟹  v=cnn = \frac{c}{v} \implies v = \frac{c}{n}.

  • Rearrange the definition systematically by isolating vv in the denominator before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the definition of refractive index: v2=cn2v_2 = \frac{c}{n_2}.

  2. Substitute c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s} and n2=1.620n_2 = 1.620: v2=3.00×108 m/s1.620≈1.85×108 m/sv_2 = \frac{3.00 \times 10^8\text{ m/s}}{1.620} \approx 1.85 \times 10^8\text{ m/s}.

Final answer

(a) ff remains constant (5.09×1014 Hz5.09 \times 10^{14}\text{ Hz}) due to phase/wavefront continuity at the boundary; (b) v2≈1.85×108 m/sv_2 \approx 1.85 \times 10^8\text{ m/s}, λ2≈364 nm\lambda_2 \approx 364\text{ nm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition n=cvn = \frac{c}{v} and practice isolating both vv and nn without memorizing multiple separate formulas.

  • Always perform a quick sanity check: since n>1n > 1, both speed vv and wavelength λ\lambda must decrease by the factor nn, while frequency ff remains fixed.

Lock it in

Similar question

01

A helium-neon laser emits red light of wavelength λ=633 nm\lambda = 633\text{ nm} in air (n=1.00n = 1.00). The beam enters a diamond crystal with a refractive index of n=2.42n = 2.42. Calculate the wave speed vv and wavelength λdiamond\lambda_{\text{diamond}} inside the diamond.

Answer

v=1.24×108 m/sv = 1.24\times 10^8\text{ m/s}, λdiamond=262 nm\lambda_{\text{diamond}} = 262\text{ nm}. Key steps: v=cn=3.00×1082.42≈1.24×108 m/sv = \frac{c}{n} = \frac{3.00\times 10^8}{2.42} \approx 1.24\times 10^8\text{ m/s}; because frequency is conserved across the boundary, λdiamond=λn=633 nm2.42≈262 nm\lambda_{\text{diamond}} = \frac{\lambda}{n} = \frac{633\text{ nm}}{2.42} \approx 262\text{ nm}.

02

An electromagnetic wave with frequency f=6.00×1014 Hzf = 6.00\times 10^{14}\text{ Hz} enters a transparent polymer film of thickness d=1.20 μmd = 1.20\,\mu\text{m} and refractive index n=1.50n = 1.50. Determine the number of complete wave cycles contained within the thickness of the film.

Answer

3.00 cycles3.00\text{ cycles}. Key steps: Vacuum wavelength is λ0=cf=3.00×1086.00×1014=500 nm=0.500 μm\lambda_0 = \frac{c}{f} = \frac{3.00\times 10^8}{6.00\times 10^{14}} = 500\text{ nm} = 0.500\,\mu\text{m}. Inside the polymer, λ=λ0n=0.500 μm1.50≈0.333 μm\lambda = \frac{\lambda_0}{n} = \frac{0.500\,\mu\text{m}}{1.50} \approx 0.333\,\mu\text{m}. Number of cycles N=dλ=1.20 μm0.333 μm=3.00N = \frac{d}{\lambda} = \frac{1.20\,\mu\text{m}}{0.333\,\mu\text{m}} = 3.00 cycles.

03

Light of wavelength λ1=480 nm\lambda_1 = 480\text{ nm} traveling in Medium 1 (n1=1.20n_1 = 1.20) passes directly into Medium 2, where its wavelength becomes λ2=360 nm\lambda_2 = 360\text{ nm}. Find the refractive index n2n_2 of Medium 2 and the ratio of wave speeds v2v1\frac{v_2}{v_1}.

Answer

n2=1.60n_2 = 1.60, v2v1=0.75\frac{v_2}{v_1} = 0.75. Key steps: Since frequency is invariant, λ1n1=λ2n2\lambda_1 n_1 = \lambda_2 n_2, so n2=n1λ1λ2=1.20×480360=1.60n_2 = \frac{n_1 \lambda_1}{\lambda_2} = \frac{1.20\times 480}{360} = 1.60. The speed ratio is v2v1=n1n2=λ2λ1=360480=0.75\frac{v_2}{v_1} = \frac{n_1}{n_2} = \frac{\lambda_2}{\lambda_1} = \frac{360}{480} = 0.75.

Loading workspace…