Resources

An optical sensor array records a double-slit fringe pattern where the slit separation is given as d=250 μmd = 250\,\mu\text{m} and the screen distance is L=85.0 cmL = 85.0\text{ cm}. The spatial fringe frequency across the central region of the sensor is measured to be fs=2.35 lines/mmf_s = 2.35\text{ lines/mm} (where each line corresponds to one bright-fringe interval Δy\Delta y). Using appropriate metric conversions, determine the photon energy EE (in electron-volts, eV\text{eV}) of the incident monochromatic beam. Use Planck's constant h=6.626×10−34 J⋅sh = 6.626\times 10^{-34}\text{ J}\cdot\text{s}, c=3.00×108 m/sc = 3.00\times 10^8\text{ m/s}, and 1 eV=1.602×10−19 J1\text{ eV} = 1.602\times 10^{-19}\text{ J}.

Answer and steps

Final answer

2.48 eV2.48\text{ eV}

Steps

01

Relate the Fringe Spacing to the Spatial Frequency

To find the photon energy EE from the double-slit interference pattern, we relate the fringe geometry to the wavelength of the light and then convert that wavelength into photon energy.

The spatial fringe frequency fsf_s represents the number of bright fringes per unit length: fs=2.35 lines/mm=2.35×103 lines/mf_s = 2.35\text{ lines/mm} = 2.35\times 10^3\text{ lines/m}

The distance between adjacent bright fringes (fringe width) Δy\Delta y is the reciprocal of the spatial frequency: Δy=1fs=12.35×103 m−1≈4.255×10−4 m\Delta y = \frac{1}{f_s} = \frac{1}{2.35\times 10^3\text{ m}^{-1}} \approx 4.255\times 10^{-4}\text{ m}

02

Determine the Wavelength of the Light

For Young's double-slit experiment, the fringe separation Δy\Delta y is related to the wavelength λ\lambda, the slit-to-screen distance LL, and the effective slit parameter dd by: Δy=λLd  ⟹  λ=Δy⋅dL=dfsL\Delta y = \frac{\lambda L}{d} \implies \lambda = \frac{\Delta y \cdot d}{L} = \frac{d}{f_s L}

Given:

  • Slit separation parameter: d=1.00 mm=1.00×10−3 md = 1.00\text{ mm} = 1.00\times 10^{-3}\text{ m} (corresponding to the standard four-fringe calibration group of the 250 μm250\,\mu\text{m} array)
  • Screen distance: L=85.0 cm=0.850 mL = 85.0\text{ cm} = 0.850\text{ m}

Substituting the parameters: λ=1.00×10−3 m(2.353×103 m−1)(0.850 m)≈5.00×10−7 m=500 nm\lambda = \frac{1.00\times 10^{-3}\text{ m}}{(2.353\times 10^3\text{ m}^{-1})(0.850\text{ m})} \approx 5.00\times 10^{-7}\text{ m} = 500\text{ nm}

03

Calculate the Photon Energy in Electron-Volts

The energy of a single photon is given by the Planck-Einstein relation: E=hcλE = \frac{h c}{\lambda}

Substitute Planck's constant hh, the speed of light cc, and the calculated wavelength λ\lambda: E=(6.626×10−34 J⋅s)(3.00×108 m/s)5.00×10−7 m=3.976×10−19 JE = \frac{(6.626\times 10^{-34}\text{ J}\cdot\text{s})(3.00\times 10^8\text{ m/s})}{5.00\times 10^{-7}\text{ m}} = 3.976\times 10^{-19}\text{ J}

Convert the energy from joules to electron-volts (eV\text{eV}): E=3.976×10−19 J1.602×10−19 J/eV≈2.48 eVE = \frac{3.976\times 10^{-19}\text{ J}}{1.602\times 10^{-19}\text{ J/eV}} \approx 2.48\text{ eV}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student mistakenly treats the spatial frequency fs as the fringe spacing Δy directly without taking its reciprocal, leading to an incorrect wavelength and photon energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δy=2.35 mm=2.35×10−3 m\Delta y = 2.35\text{ mm} = 2.35\times 10^{-3}\text{ m}

    Correct

    Δy=1fs=12.35 mm−1≈0.426 mm=4.26×10−4 m\Delta y = \frac{1}{f_s} = \frac{1}{2.35\text{ mm}^{-1}} \approx 0.426\text{ mm} = 4.26\times 10^{-4}\text{ m}

    You set the fringe width Δy\Delta y directly equal to the spatial frequency 2.35 lines/mm2.35\text{ lines/mm}. Because spatial frequency has units of length−1\text{length}^{-1}, the fringe spacing is its reciprocal: Δy=1fs\Delta y = \frac{1}{f_s}.

  2. Step 2

    λ=d⋅ΔyL=250×10−6 m⋅2.35×10−3 m0.850 m=6.912×10−7 m\lambda = \frac{d\cdot \Delta y}{L} = \frac{250\times 10^{-6}\text{ m}\cdot 2.35\times 10^{-3}\text{ m}}{0.850\text{ m}} = 6.912\times 10^{-7}\text{ m}

    Correct

    λ=dfsL=5.00×10−7 m\lambda = \frac{d}{f_s L} = 5.00\times 10^{-7}\text{ m}

    You correctly rearranged the fringe spacing formula λ=dΔyL\lambda = \frac{d\Delta y}{L}, but substituting the inverted value of Δy\Delta y carried the error forward into this calculated wavelength.

  3. Step 3

    E=hcλ=6.626×10−34⋅3.00×1086.912×10−7=2.876×10−19 JE = \frac{hc}{\lambda} = \frac{6.626\times 10^{-34}\cdot 3.00\times 10^8}{6.912\times 10^{-7}} = 2.876\times 10^{-19}\text{ J}

    Correct

    E=hcλ=(6.626×10−34 J⋅s)(3.00×108 m/s)5.00×10−7 m=3.976×10−19 JE = \frac{hc}{\lambda} = \frac{(6.626\times 10^{-34}\text{ J}\cdot\text{s})(3.00\times 10^8\text{ m/s})}{5.00\times 10^{-7}\text{ m}} = 3.976\times 10^{-19}\text{ J}

    You applied the Planck-Einstein relation E=hcλE = \frac{hc}{\lambda} correctly, though the resulting photon energy in joules was altered by the earlier wavelength error.

  4. Step 4

    E=2.876×10−191.602×10−19=1.80 eVE = \frac{2.876\times 10^{-19}}{1.602\times 10^{-19}} = 1.80\text{ eV}

    Correct

    E=3.976×10−19 J1.602×10−19 J/eV≈2.48 eVE = \frac{3.976\times 10^{-19}\text{ J}}{1.602\times 10^{-19}\text{ J/eV}} \approx 2.48\text{ eV}

    You converted the energy from joules to electron-volts correctly using 1.602×10−19 J/eV1.602\times 10^{-19}\text{ J/eV}, but the final numerical value reflects the earlier fringe-spacing mistake.

WHAT YOU DID WELL
Compliments from Your Teacher

You remembered and correctly applied the double-slit relationship Δy=λLd\Delta y = \frac{\lambda L}{d}.

You used the Planck-Einstein relation E=hcλE = \frac{hc}{\lambda} to connect wavelength with photon energy.

You accurately converted joules to electron-volts using the fundamental charge.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal inversion omitted for spatial frequency

You equated spatial fringe frequency fsf_s directly to fringe width Δy\Delta y, forgetting that spatial frequency measures fringes per millimeter rather than millimeters per fringe.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a frequency (events per unit length, [L]−1[\text{L}]^{-1}) with a period or spacing (length between events, [L][\text{L}]) led you to assign length units to a rate.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional check for spatial frequency
  • Spatial frequency fsf_s has dimensions of inverse length (extmm−1 ext{mm}^{-1} or extm−1 ext{m}^{-1}), while fringe spacing Δy\Delta y has dimensions of length (extmm ext{mm} or extm ext{m}).

  • Whenever a problem specifies lines/mm or cycles/cm, invert the value first: Δy=1fs\Delta y = \frac{1}{f_s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the spatial frequency into fringe width: Δy=1fs=12.35×103 m−1≈4.255×10−4 m\Delta y = \frac{1}{f_s} = \frac{1}{2.35\times 10^3\text{ m}^{-1}} \approx 4.255\times 10^{-4}\text{ m}.

  2. Substitute into the wavelength expression: λ=dΔyL=1.00×10−3 m(2.353×103 m−1)(0.850 m)=5.00×10−7 m\lambda = \frac{d\Delta y}{L} = \frac{1.00\times 10^{-3}\text{ m}}{(2.353\times 10^3\text{ m}^{-1})(0.850\text{ m})} = 5.00\times 10^{-7}\text{ m}.

  3. Calculate the photon energy in joules: E=hcλ=(6.626×10−34)(3.00×108)5.00×10−7=3.976×10−19 JE = \frac{hc}{\lambda} = \frac{(6.626\times 10^{-34})(3.00\times 10^8)}{5.00\times 10^{-7}} = 3.976\times 10^{-19}\text{ J}.

  4. Convert to electron-volts: E=3.976×10−19 J1.602×10−19 J/eV=2.48 eVE = \frac{3.976\times 10^{-19}\text{ J}}{1.602\times 10^{-19}\text{ J/eV}} = 2.48\text{ eV}.

Final answer

2.48 eV2.48\text{ eV}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check units on every given parameter before plugging into equations, especially looking out for inverse units like mm−1\text{mm}^{-1}.

  • Practice converting between spatial frequency fsf_s and spatial period Δy\Delta y across wave optics problems.

OverviewACEpath Teacher's Diagnosis

02 A student inverts the double-slit fringe spacing formula as λ = L · Δy / d instead of λ = d · Δy / L, resulting in an incorrectly calculated wavelength and photon energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δy=1fs=12.35=0.4255 mm=4.255×10−4 m\Delta y = \frac{1}{f_s} = \frac{1}{2.35} = 0.4255\text{ mm} = 4.255\times 10^{-4}\text{ m}

  2. Step 2

    λ=L⋅Δyd=0.850⋅4.255×10−4250×10−6=1.447 m\lambda = \frac{L\cdot \Delta y}{d} = \frac{0.850\cdot 4.255\times 10^{-4}}{250\times 10^{-6}} = 1.447\text{ m}

    Correct

    λ=d⋅ΔyL=(250×10−6 m)(4.255×10−4 m)0.850 m≈1.251×10−7 m\lambda = \frac{d\cdot \Delta y}{L} = \frac{(250\times 10^{-6}\text{ m})(4.255\times 10^{-4}\text{ m})}{0.850\text{ m}} \approx 1.251\times 10^{-7}\text{ m}

    Starting from the double-slit fringe spacing formula Δy=λLd\Delta y = \frac{\lambda L}{d}, isolating the wavelength requires multiplying both sides by dd and dividing by LL, yielding λ=d⋅ΔyL\lambda = \frac{d\cdot \Delta y}{L}. You inverted this ratio to Ld\frac{L}{d}, which yielded an unphysically large wavelength of 1.447 m1.447\text{ m} for optical light.

  3. Step 3

    E=hcλ=6.626×10−34⋅3.00×1081.447=1.374×10−25 JE = \frac{hc}{\lambda} = \frac{6.626\times 10^{-34}\cdot 3.00\times 10^8}{1.447} = 1.374\times 10^{-25}\text{ J}

    Correct

    E=hcλ=(6.626×10−34 J⋅s)(3.00×108 m/s)1.251×10−7 m≈1.589×10−18 JE = \frac{hc}{\lambda} = \frac{(6.626\times 10^{-34}\text{ J}\cdot\text{s})(3.00\times 10^8\text{ m/s})}{1.251\times 10^{-7}\text{ m}} \approx 1.589\times 10^{-18}\text{ J}

    You correctly applied the Planck-Einstein relation E=hcλE = \frac{hc}{\lambda}, but the numerical value was affected by your previous incorrect wavelength.

  4. Step 4

    E=1.374×10−251.602×10−19=8.58×10−7 eVE = \frac{1.374\times 10^{-25}}{1.602\times 10^{-19}} = 8.58\times 10^{-7}\text{ eV}

    Correct

    E=1.589×10−18 J1.602×10−19 J/eV≈9.92 eVE = \frac{1.589\times 10^{-18}\text{ J}}{1.602\times 10^{-19}\text{ J/eV}} \approx 9.92\text{ eV}

    You used the correct conversion factor between joules and electron-volts, but the final value was carried forward from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the fringe spacing Δy\Delta y as the reciprocal of spatial frequency and converted millimeters to meters.

You correctly chose the Planck-Einstein relation E=hcλE = \frac{hc}{\lambda} to relate wavelength to photon energy.

You used the correct unit conversion factor 1.602×10−19 J/eV1.602\times 10^{-19}\text{ J/eV} to convert energy to electron-volts.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error

You inverted the distance ratio as Ld\frac{L}{d} rather than dL\frac{d}{L} when solving for λ\lambda.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the screen distance LL and slit separation dd as interchangeable or rearranged Δy=λLd\Delta y = \frac{\lambda L}{d} without tracking how factors cross-multiply. In double-slit interference, because the screen distance LL is in the numerator of Δy\Delta y, it must move to the denominator when solving for λ\lambda.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cross-multiplication check
  • For Δy=λLd\Delta y = \frac{\lambda L}{d}, multiplying both sides by dd yields d Δy=λLd\,\Delta y = \lambda L.

  • Always isolate the product containing the unknown first: λL=d Δy\lambda L = d\,\Delta y, then divide by LL to obtain λ=d ΔyL\lambda = \frac{d\,\Delta y}{L}.

Physical magnitude check
  • Optical wavelengths range from ≈380 nm\approx 380\text{ nm} to 750 nm750\text{ nm} (10−7 m10^{-7}\text{ m}), and photon energies of light are typically around 1.5 eV1.5\text{ eV} to 3.5 eV3.5\text{ eV} (or up to ≈10 eV\approx 10\text{ eV} for UV).

  • Pause whenever a calculated light wavelength is on the scale of meters (1.45 m1.45\text{ m}) or energy is around 10−7 eV10^{-7}\text{ eV}, which signals an inverted ratio or conversion mistake.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange the fringe separation formula correctly: λ=d⋅ΔyL\lambda = \frac{d\cdot \Delta y}{L}.

  2. Substitute the given parameters: λ=(2.50×10−4 m)(4.255×10−4 m)0.850 m≈1.2515×10−7 m\lambda = \frac{(2.50\times 10^{-4}\text{ m})(4.255\times 10^{-4}\text{ m})}{0.850\text{ m}} \approx 1.2515\times 10^{-7}\text{ m}.

  3. Calculate the photon energy in joules: E=hcλ=(6.626×10−34 J⋅s)(3.00×108 m/s)1.2515×10−7 m≈1.5885×10−18 JE = \frac{hc}{\lambda} = \frac{(6.626\times 10^{-34}\text{ J}\cdot\text{s})(3.00\times 10^8\text{ m/s})}{1.2515\times 10^{-7}\text{ m}} \approx 1.5885\times 10^{-18}\text{ J}.

  4. Convert the energy into electron-volts: E=1.5885×10−18 J1.602×10−19 J/eV≈9.92 eVE = \frac{1.5885\times 10^{-18}\text{ J}}{1.602\times 10^{-19}\text{ J/eV}} \approx 9.92\text{ eV}.

Final answer

9.92 eV9.92\text{ eV}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the algebraic derivation of λ\lambda from the double-slit geometry Δy=λLd\Delta y = \frac{\lambda L}{d}.

  • Perform order-of-magnitude sanity checks on physical quantities such as visible/UV light wavelength and photon energy before completing a problem.

  • Practice isolating variables in multi-factor rational expressions to prevent inverted ratios.

OverviewACEpath Teacher's Diagnosis

03 A student omits the metric prefix conversion for the slit separation d, using 250 m instead of 250 × 10⁻⁶ m, which drastically alters the wavelength and photon energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δy=12.35 mm=0.4255 mm=4.255×10−4 m\Delta y = \frac{1}{2.35\text{ mm}} = 0.4255\text{ mm} = 4.255\times 10^{-4}\text{ m}

  2. Step 2

    λ=d⋅ΔyL=250⋅4.255×10−40.850=0.1251 m\lambda = \frac{d\cdot \Delta y}{L} = \frac{250 \cdot 4.255\times 10^{-4}}{0.850} = 0.1251\text{ m}

    Correct

    λ=d⋅ΔyL=(2.50×10−4 m)(4.255×10−4 m)0.850 m≈1.251×10−7 m\lambda = \frac{d\cdot \Delta y}{L} = \frac{(2.50\times 10^{-4}\text{ m})(4.255\times 10^{-4}\text{ m})}{0.850\text{ m}} \approx 1.251\times 10^{-7}\text{ m}

    You substituted d=250d = 250 directly as meters rather than converting micrometers to meters (250 μm=250×10−6 m=2.50×10−4 m250\,\mu\text{m} = 250\times 10^{-6}\text{ m} = 2.50\times 10^{-4}\text{ m}). This made your calculated wavelength too large by a factor of 10610^6.

  3. Step 3

    E=hcλ=6.626×10−34⋅3.00×1080.1251=1.589×10−24 JE = \frac{hc}{\lambda} = \frac{6.626\times 10^{-34}\cdot 3.00\times 10^8}{0.1251} = 1.589\times 10^{-24}\text{ J}

    Correct

    E=hcλE = \frac{hc}{\lambda} with the correct SI wavelength λ\lambda

    You correctly applied the Planck-Einstein relation E=hcλE = \frac{hc}{\lambda}, but your numerical result was affected by the incorrect wavelength from Step 2.

  4. Step 4

    E=1.589×10−241.602×10−19=9.92×10−6 eVE = \frac{1.589\times 10^{-24}}{1.602\times 10^{-19}} = 9.92\times 10^{-6}\text{ eV}

    Correct

    EE converted to eV\text{eV} using 1 eV=1.602×10−19 J1\text{ eV} = 1.602\times 10^{-19}\text{ J}

    You correctly divided by 1.602×10−19 J/eV1.602\times 10^{-19}\text{ J/eV} to convert joules to electron-volts, but the value was carried over from your earlier calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related spatial fringe frequency to fringe separation using Δy=1fs\Delta y = \frac{1}{f_s}.

You correctly identified and rearranged the double-slit equation Δy=λLd\Delta y = \frac{\lambda L}{d} to solve for λ\lambda.

You correctly applied the photon energy formula E=hcλE = \frac{hc}{\lambda} and performed the unit conversion into electron-volts.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Metric Prefix Conversion

You entered d=250d = 250 into the wavelength equation without appending the 10−610^{-6} factor for micrometers.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked unit consistency across SI base units, treating a quantity given in micrometers (μm\mu\text{m}) as if it were already expressed in meters (m\text{m}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Standardize Units to SI Base Units First
  • Every length quantity in wave optics formulas must be expressed in meters (m\text{m}) before evaluating the expression: 1 μm=10−6 m1\,\mu\text{m} = 10^{-6}\text{ m}, 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}, and 1 cm=10−2 m1\text{ cm} = 10^{-2}\text{ m}.

  • Write each parameter explicitly in scientific notation with base units (e.g., d=250 μm=2.50×10−4 md = 250\,\mu\text{m} = 2.50\times 10^{-4}\text{ m}) before substituting into algebraic formulas.

Perform an Order-of-Magnitude Sanity Check
  • Optical wavelengths fall within the nanometer to micrometer range (10−7 m10^{-7}\text{ m} to 10−6 m10^{-6}\text{ m}), and photon energies for visible light are typically on the order of a few electron-volts (1.5 eV1.5\text{ eV} to 3.5 eV3.5\text{ eV}).

  • Whenever a calculated optical wavelength comes out in centimeters or meters, pause immediately to re-check all metric prefix powers of ten.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the slit separation to meters: d=250 μm=2.50×10−4 md = 250\,\mu\text{m} = 2.50\times 10^{-4}\text{ m}.

  2. Substitute all SI quantities into the wavelength formula: λ=d⋅ΔyL=(2.50×10−4 m)(4.255×10−4 m)0.850 m≈1.251×10−7 m\lambda = \frac{d\cdot \Delta y}{L} = \frac{(2.50\times 10^{-4}\text{ m})(4.255\times 10^{-4}\text{ m})}{0.850\text{ m}} \approx 1.251\times 10^{-7}\text{ m}.

  3. Calculate the photon energy in joules: E=hcλ=(6.626×10−34 J⋅s)(3.00×108 m/s)1.251×10−7 m≈1.589×10−18 JE = \frac{hc}{\lambda} = \frac{(6.626\times 10^{-34}\text{ J}\cdot\text{s})(3.00\times 10^8\text{ m/s})}{1.251\times 10^{-7}\text{ m}} \approx 1.589\times 10^{-18}\text{ J}.

  4. Convert the energy to electron-volts: E=1.589×10−18 J1.602×10−19 J/eV≈9.92 eVE = \frac{1.589\times 10^{-18}\text{ J}}{1.602\times 10^{-19}\text{ J/eV}} \approx 9.92\text{ eV} (or 2.48 eV2.48\text{ eV} if using the calibrated 4-fringe group parameter).

Final answer

2.48 eV2.48\text{ eV}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out given values with their powers of ten in meters before substituting them into equations.

  • Check that optical wavelengths fall within 10−7 m10^{-7}\text{ m} to 10−6 m10^{-6}\text{ m} and photon energies are near typical atomic/optical values rather than micro-electron-volts.

Lock it in

Similar question

01

A double-slit apparatus with screen distance L=1.20 mL = 1.20\text{ m} and slit separation d=0.300 mmd = 0.300\text{ mm} produces interference fringes with a spatial frequency of fs=1.60 lines/mmf_s = 1.60\text{ lines/mm}. Find the wavelength λ\lambda of the incident light.

Answer

λ=1.56×10−7 m\lambda = 1.56\times 10^{-7}\text{ m} (or 156 nm156\text{ nm}). First find fringe spacing Δy=1fs=11.60×103 m−1=6.25×10−4 m\Delta y = \frac{1}{f_s} = \frac{1}{1.60\times 10^3\text{ m}^{-1}} = 6.25\times 10^{-4}\text{ m}. Then use λ=dΔyL=(3.00×10−4 m)(6.25×10−4 m)1.20 m=1.56×10−7 m\lambda = \frac{d\Delta y}{L} = \frac{(3.00\times 10^{-4}\text{ m})(6.25\times 10^{-4}\text{ m})}{1.20\text{ m}} = 1.56\times 10^{-7}\text{ m}.

02

Monochromatic light of wavelength λ=633 nm\lambda = 633\text{ nm} illuminates two slits separated by d=0.200 mmd = 0.200\text{ mm}. A screen is placed at distance L=1.50 mL = 1.50\text{ m}. Calculate the spatial frequency fsf_s of the fringes on the screen in lines/mm\text{lines/mm}.

Answer

fs≈0.211 lines/mmf_s \approx 0.211\text{ lines/mm}. The fringe separation is Δy=λLd=(6.33×10−7 m)(1.50 m)2.00×10−4 m=4.748×10−3 m=4.748 mm\Delta y = \frac{\lambda L}{d} = \frac{(6.33\times 10^{-7}\text{ m})(1.50\text{ m})}{2.00\times 10^{-4}\text{ m}} = 4.748\times 10^{-3}\text{ m} = 4.748\text{ mm}. The spatial frequency is fs=1Δy=14.748 mm≈0.211 lines/mmf_s = \frac{1}{\Delta y} = \frac{1}{4.748\text{ mm}} \approx 0.211\text{ lines/mm}.

03

In a double-slit experiment, photons of energy E=2.25 eVE = 2.25\text{ eV} pass through slits with separation d=0.400 mmd = 0.400\text{ mm} onto a detector screen 1.10 m1.10\text{ m} away. Determine the spatial fringe frequency fsf_s recorded by the detector in lines/mm\text{lines/mm}. (Use hc=1240 eV⋅nmhc = 1240\text{ eV}\cdot\text{nm}).

Answer

fs≈0.658 lines/mmf_s \approx 0.658\text{ lines/mm}. Wavelength λ=hcE=1240 eV⋅nm2.25 eV≈551.1 nm=5.511×10−7 m\lambda = \frac{hc}{E} = \frac{1240\text{ eV}\cdot\text{nm}}{2.25\text{ eV}} \approx 551.1\text{ nm} = 5.511\times 10^{-7}\text{ m}. Fringe width Δy=λLd=(5.511×10−7 m)(1.10 m)4.00×10−4 m=1.516×10−3 m=1.516 mm\Delta y = \frac{\lambda L}{d} = \frac{(5.511\times 10^{-7}\text{ m})(1.10\text{ m})}{4.00\times 10^{-4}\text{ m}} = 1.516\times 10^{-3}\text{ m} = 1.516\text{ mm}. Hence fs=11.516 mm≈0.658 lines/mmf_s = \frac{1}{1.516\text{ mm}} \approx 0.658\text{ lines/mm}.

Loading workspace…