Resources
A light metric inspection beam of length has a mass of . It is supported horizontally by two suspension strings located at and from the left end. Two calibration weights are attached: a weight of mass placed at from the left end, and a weight of mass placed at from the left end. Using , calculate the upward tension in the right string in newtons ().
Answer and steps
Final answer
Steps
Identify Forces and Choose a Pivot
To find the tension in the right support string, we apply the condition for rotational equilibrium: the sum of torques about any pivot point must equal zero ().
Choosing the pivot at the attachment point of the left suspension string () eliminates the unknown tension from the torque equation because its lever arm is zero.
The forces acting on the horizontal beam are:
- Mass : exerts a downward gravitational force to the left of the pivot.
- Left string tension : acts upward at the pivot (lever arm ).
- Beam weight : acts downward at the beam's center of mass, .
- Mass : exerts a downward gravitational force to the right of the pivot.
- Right string tension : acts upward at .
Determine Lever Arms Relative to the Pivot
Convert all given quantities to SI units (, , , ):
- Lever arm for : Because this downward force lies to the left of the pivot, it exerts a counterclockwise (CCW) torque.
- Lever arm for the beam's weight : This downward force lies to the right of the pivot, exerting a clockwise (CW) torque.
- Lever arm for : Relative to the left suspension point, the distance to the load is to the right, exerting a clockwise (CW) torque.
- Lever arm for : This upward force to the right of the pivot exerts a counterclockwise (CCW) torque.
Set Up and Solve the Torque Equilibrium Equation
For rotational equilibrium, the total counterclockwise torque must equal the total clockwise torque:
Substitute the numerical values:
Calculate each torque component:
- CCW torque from :
- CW torque from the beam's mass :
- CW torque from :
Now solve for :
Typical errors
01 The student forgets that the beam has mass and omits the gravitational torque of the beam.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly identified the pivot at the left support () and calculated the lever arms for and . However, you forgot to include the downward gravitational force of the beam itself (), which acts at its center of mass () and produces a clockwise torque about the pivot.
- Step 2Correct
Your arithmetic evaluation was carried out cleanly, but it inherits the missing torque term from the beam's weight.
- Step 3Correct
Because the beam's weight was omitted from the torque balance, the resulting tension in the right string is underestimated.
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the left string attachment point as the pivot to eliminate the unknown tension from the torque equation.
You correctly calculated the lever arms for the two hanging masses relative to the pivot as and .
You assigned the correct rotational signs to the torques of (counterclockwise) and (clockwise).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou solved the problem as if the beam were massless, overlooking the given beam mass .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen a beam or rod has a specified mass, its weight acts as an external downward force applied at its center of mass (). Omission of this term commonly occurs when reading 'light' or focusing exclusively on discrete attached loads.
REASONING PATH
Your ACEpath teacher’s suggested approach- Account for Beam Weight
If a beam has mass , represent its weight acting downwards at its geometric center of mass ().
Always draw a free-body diagram and list the beam's own weight alongside any external attached weights before writing .
- Calculate Center of Mass Lever Arm
The lever arm for the beam's weight is .
For this pivot at and , include the clockwise torque .
CORRECTED PATH
ACEpath Teacher's DemonstrationInclude the clockwise torque due to the beam's mass: .
Add this clockwise torque to the right side of the balance: .
Solve for the right string tension: (or if using the workbook's unshifted load arm convention).
02 The student treats the position of m1 as being to the right of the pivot, adding its torque instead of subtracting it from the clockwise torques.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because weight is located at , it sits to the left of the pivot at . A downward force applied to the left of a pivot creates a counterclockwise torque, rotating the beam in the same direction as the upward tension . It must oppose the clockwise torques rather than add to them.
- Step 2Correct
You performed the numerical arithmetic accurately, but the final answer is affected by the incorrect sign assigned to the torque of in Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou chose the left suspension point as the pivot, which effectively eliminated the unknown tension .
You correctly calculated the lever arm distances from the pivot to the center of mass and the masses.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou added the torque of to the clockwise torques on the right-hand side instead of grouping it with the counterclockwise torques.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated all downward gravitational forces with clockwise rotation, overlooking that a downward force acting to the left of the pivot produces a counterclockwise rotation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Rotational Sense Relative to the Pivot
A downward force located to the left of a pivot causes counterclockwise (CCW) rotation; a downward force to the right of the pivot causes clockwise (CW) rotation.
Visualize or sketch the rotation that each individual force would cause around the chosen pivot before assigning plus and minus signs in your torque equation.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the equilibrium condition with correct signs: .
Isolate : .
Substitute the values: .
03 The student uses distances from the left end of the beam as lever arms instead of measuring distances relative to the pivot at the left string.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You omitted the upward support force , which is only valid if you take torques about the left support at . However, you used distances from the left edge of the beam (, , , and ) as your lever arms rather than measuring each distance from the pivot point.
- Step 2
T_2 1.25 = 9.80 (0.450 0.10 + 0.850 0.75 + 1.20 0.90) T_2 1.25 = 17.2725 T_2 = 13.8
CorrectT_2 (1.00) + (0.450)(9.80)(0.150) = (0.850)(9.80)(0.500) + (1.20)(9.80)(0.900) T_2 14.1
Your algebraic simplification and division were calculated accurately based on your torque equation, but the result was affected by the incorrect lever arms in Step 1.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the equilibrium condition that net torque must equal zero.
You accurately converted grams to kilograms and applied .
You performed all downstream algebraic manipulations and arithmetic calculations without arithmetic error.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the position coordinates from the beam's edge directly into the torque equation instead of subtracting the pivot position .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing an object's coordinate position along a coordinate axis with its lever arm relative to a chosen pivot point. A force's torque is defined by , where , not the absolute coordinate .
REASONING PATH
Your ACEpath teacher’s suggested approach- Establish the Pivot Point
Placing a pivot at the line of action of an unknown force eliminates its torque because its lever arm is zero.
Explicitly write down the pivot location (e.g., 'Pivot at ') before writing any torque terms.
- Calculate Lever Arms Relative to the Pivot
Every lever arm must be the distance from the chosen pivot to the force, .
Compute and label each lever arm individually before substituting values into .
CORRECTED PATH
ACEpath Teacher's DemonstrationChoose the pivot at the left support string () so that exerts zero torque.
Determine the lever arms relative to this pivot: , (counterclockwise), and (clockwise).
Equate counterclockwise and clockwise torques: .
Simplify the torque values: .
Solve for the tension: .
Lock it in
When a problem specifies a beam's mass , where does its gravitational force act in a torque calculation?
At the beam's center of mass (midpoint for a uniform beam), producing a torque .
Similar question
A uniform wooden plank of length and mass rests horizontally on two supports located at its ends ( and ). A block of mass is placed at . Using , find the upward normal force exerted by the right support.
Answer
. Set pivot at left support (): .
A uniform steel beam of length and mass is supported horizontally by a cable at and another cable at . A worker hangs a load of at and a second load of at . Taking , calculate the tension in the right cable.
Answer
. Choose pivot at left cable (): .
A nonuniform meter stick of total length has a mass of , but its center of mass is located at . It is balanced horizontally on a knife-edge pivot placed at . An unknown mass is hung at , while a known mass of is hung at . Calculate required to maintain static equilibrium.
Answer
. Take torques about the pivot at : Counterclockwise torque is . Clockwise torques are from the meter stick's weight and the known mass . Equating torques: .