Resources

A hydraulic crimping tool uses an input master cylinder with a bore area of A1=0.450 in2A_1 = 0.450\text{ in}^2 and a slave cylinder with an area of A2=5.85 in2A_2 = 5.85\text{ in}^2. An input pressure of P1=320 psiP_1 = 320\text{ psi} is generated at the master cylinder. Calculate: (a) the hydrostatic pressure P1P_1 expressed in kilopascals (kPa\text{kPa}), given that 1 psi=6894.76 Pa1\text{ psi} = 6894.76\text{ Pa}, and (b) the resulting crimping force F2F_2 delivered by the slave cylinder expressed in kilonewtons (kN\text{kN}), given that 1 lbf=4.44822 N1\text{ lbf} = 4.44822\text{ N}.

Answer and steps

Final answer

(a) P1=2.21×103 kPaP_1 = 2.21 \times 10^3\text{ kPa}; (b) F2=8.33 kNF_2 = 8.33\text{ kN}

Steps

Part (a): Convert the Hydrostatic Pressure to Kilopascals (kPa\text{kPa})

Pressure is defined as the force applied perpendicular to a surface per unit area: P=FAP = \frac{F}{A}

We are given the hydrostatic pressure at the master cylinder in pounds per square inch (psi\text{psi}): P1=320 psiP_1 = 320\text{ psi}

Using the given conversion factor 1 psi=6894.76 Pa1\text{ psi} = 6894.76\text{ Pa} and noting that 1 kPa=103 Pa1\text{ kPa} = 10^3\text{ Pa}: P1=320 psi×6894.76Papsi=2.20632×106 PaP_1 = 320\text{ psi} \times 6894.76\frac{\text{Pa}}{\text{psi}} = 2.20632 \times 10^6\text{ Pa}

Converting pascals (Pa\text{Pa}) to kilopascals (kPa\text{kPa}): P1=2.20632×106 Pa103 Pa/kPa≈2.21×103 kPaP_1 = \frac{2.20632 \times 10^6\text{ Pa}}{10^3\text{ Pa/kPa}} \approx 2.21 \times 10^3\text{ kPa}


Part (b): Calculate the Crimping Force (F2F_2) Delivered by the Slave Cylinder

Pascal's Principle states that any pressure applied to an enclosed, incompressible fluid is transmitted equally and undiminished throughout the fluid and to the walls of its container: P2=P1P_2 = P_1

The force exerted by the slave cylinder is given by multiplying the transmitted fluid pressure by the area of the slave piston: F2=P2⋅A2=P1⋅A2F_2 = P_2 \cdot A_2 = P_1 \cdot A_2

Substitute P1=320 psiP_1 = 320\text{ psi} and A2=5.85 in2A_2 = 5.85\text{ in}^2: F2=320lbfin2×5.85 in2=1872 lbfF_2 = 320\frac{\text{lbf}}{\text{in}^2} \times 5.85\text{ in}^2 = 1872\text{ lbf}

Convert this force from pounds-force (lbf\text{lbf}) to newtons (N\text{N}) using 1 lbf=4.44822 N1\text{ lbf} = 4.44822\text{ N}: F2=1872 lbf×4.44822Nlbf≈8327.1 NF_2 = 1872\text{ lbf} \times 4.44822\frac{\text{N}}{\text{lbf}} \approx 8327.1\text{ N}

Expressing the result in kilonewtons (kN\text{kN}, where 1 kN=103 N1\text{ kN} = 10^3\text{ N}) to three significant figures: F2=8327.1 N103 N/kN≈8.33 kNF_2 = \frac{8327.1\text{ N}}{10^3\text{ N/kN}} \approx 8.33\text{ kN}

Common Pitfall: Do not confuse the area ratio with the pressure calculation. Since pressure is already directly specified (P1=320 psiP_1 = 320\text{ psi}), it acts uniformly across the entire system. You do not need to use the master piston area A1A_1 to find F2F_2, as F2=P⋅A2F_2 = P \cdot A_2 directly.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the master pressure by the area ratio instead of multiplying by area, incorrectly computing force as pressure divided by area.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P1=320×6894.76 Pa=2206323.2 Pa  ⟹  P1=2206.32 kPaP_1 = 320 \times 6894.76\text{ Pa} = 2206323.2\text{ Pa} \implies P_1 = 2206.32\text{ kPa}

  2. Step 2

    F2=P2A2  ⟹  F2=3205.85=54.70 lbfF_2 = \frac{P_2}{A_2} \implies F_2 = \frac{320}{5.85} = 54.70\text{ lbf}

    Correct

    F2=P2⋅A2=320 psi×5.85 in2=1872 lbfF_2 = P_2 \cdot A_2 = 320\text{ psi} \times 5.85\text{ in}^2 = 1872\text{ lbf}

    Pressure is defined as force per unit area (P=FAP = \frac{F}{A}). Solving for force requires multiplying pressure by area (F=P⋅AF = P \cdot A), not dividing pressure by area.

  3. Step 3

    F2=54.70×4.44822 N=243.32 N  ⟹  F2=0.243 kNF_2 = 54.70 \times 4.44822\text{ N} = 243.32\text{ N} \implies F_2 = 0.243\text{ kN}

    Correct

    F2=1872 lbf×4.44822Nlbf=8327.1 N≈8.33 kNF_2 = 1872\text{ lbf} \times 4.44822\frac{\text{N}}{\text{lbf}} = 8327.1\text{ N} \approx 8.33\text{ kN}

    You executed the unit conversion arithmetic from pounds-force to kilonewtons properly, but the result was affected by the incorrect force value from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted the pressure from psi to pascals and then to kilopascals.

You correctly identified that the fluid pressure transmits undiminished to the slave cylinder.

You properly converted pounds-force to newtons and kilonewtons using the correct conversion ratio.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Rearrangement Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the formula P=FAP = \frac{F}{A} when isolating the force FF, dividing pressure by area instead of multiplying them together. Checking the units would show that lbf/in2in2=lbfin4\frac{\text{lbf/in}^2}{\text{in}^2} = \frac{\text{lbf}}{\text{in}^4}, which does not equal force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate Force from Pressure
  • P=FA  ⟹  F=P⋅AP = \frac{F}{A} \implies F = P \cdot A

  • Multiply the pressure by the surface area across which that pressure acts.

Dimensional Consistency Check
  • [Pressure]×[Area]=ForceArea×Area=Force[\text{Pressure}] \times [\text{Area}] = \frac{\text{Force}}{\text{Area}} \times \text{Area} = \text{Force}

  • Check that units multiply to yield force (e.g., psi×in2=lbfin2×in2=lbf\text{psi} \times \text{in}^2 = \frac{\text{lbf}}{\text{in}^2} \times \text{in}^2 = \text{lbf}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the transmitted pressure P2=320 psiP_2 = 320\text{ psi} by the slave cylinder area A2=5.85 in2A_2 = 5.85\text{ in}^2: F2=P2⋅A2=320×5.85=1872 lbfF_2 = P_2 \cdot A_2 = 320 \times 5.85 = 1872\text{ lbf}.

  2. Convert the resulting force to newtons: F2=1872 lbf×4.44822Nlbf≈8327.1 NF_2 = 1872\text{ lbf} \times 4.44822\frac{\text{N}}{\text{lbf}} \approx 8327.1\text{ N}.

  3. Convert newtons to kilonewtons: F2=8327.1 N103 N/kN≈8.33 kNF_2 = \frac{8327.1\text{ N}}{10^3\text{ N/kN}} \approx 8.33\text{ kN}.

Final answer

(a) P1≈2.21×103 kPaP_1 \approx 2.21 \times 10^3\text{ kPa}; (b) F2≈8.33 kNF_2 \approx 8.33\text{ kN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the fundamental definition P=FAP = \frac{F}{A} before rearranging terms.

  • Perform a quick dimensional check on your rearranged formula: force units must always equal pressure units multiplied by area units.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the master cylinder area with the slave cylinder area, using the inverse area ratio and calculating F₂ = P₁ × A₁ instead of P₁ × A₂.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P1=320×6.89476 kPa  ⟹  P1=2206.32 kPaP_1 = 320 \times 6.89476\text{ kPa} \implies P_1 = 2206.32\text{ kPa}

  2. Step 2

    F2=P1×A1  ⟹  F2=320×0.450=144 lbfF_2 = P_1 \times A_1 \implies F_2 = 320 \times 0.450 = 144\text{ lbf}

    Correct

    F2=P1×A2=320 psi×5.85 in2=1872 lbfF_2 = P_1 \times A_2 = 320\text{ psi} \times 5.85\text{ in}^2 = 1872\text{ lbf}

    By Pascal's principle, fluid pressure is transmitted undiminished (P2=P1P_2 = P_1). The output force exerted by the slave cylinder acts across its own bore area A2A_2, giving F2=P1×A2F_2 = P_1 \times A_2, not P1×A1P_1 \times A_1.

  3. Step 3

    F2=144×4.44822=640.54 N  ⟹  F2=0.641 kNF_2 = 144 \times 4.44822 = 640.54\text{ N} \implies F_2 = 0.641\text{ kN}

    Correct

    F2=1872 lbf×4.44822Nlbf≈8327.1 N≈8.33 kNF_2 = 1872\text{ lbf} \times 4.44822\frac{\text{N}}{\text{lbf}} \approx 8327.1\text{ N} \approx 8.33\text{ kN}

    Your unit conversion from lbf to kN was mathematically correct, but the final value was affected by using the incorrect force from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the given hydrostatic pressure from psi to kilopascals.

You correctly applied the conversion factor between pounds-force and newtons, as well as the metric prefix for kilonewtons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Subscript/Area Mismatch in Hydraulic Force Equation

No, this is a conceptual error regarding how pressure translates to force at different pistons in a hydraulic system.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You paired the output force of the slave cylinder (F2F_2) with the cross-sectional area of the master cylinder (A1A_1) rather than the slave cylinder (A2A_2). In an enclosed hydraulic system, fluid pressure PP is uniform throughout, meaning the force at any specific piston depends directly on that specific piston's area: F=P⋅AF = P \cdot A.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Force and Area Subscripts
  • Fi=P⋅AiF_i = P \cdot A_i for any cylinder ii in a shared hydraulic fluid line.

  • Check that the piston area used matches the specific cylinder whose force you are calculating (F2=P⋅A2F_2 = P \cdot A_2).

Physical Sanity Check for Hydraulic Advantage
  • A larger slave cylinder (A2>A1A_2 > A_1) must produce a force larger than the input force (F2>F1F_2 > F_1).

  • Compare the output force to the input force; a hydraulic press or crimper multiplies force, so F2F_2 should be substantially larger than F1F_1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the relationship between slave force, pressure, and slave piston area: F2=P1⋅A2F_2 = P_1 \cdot A_2.

  2. Substitute P1=320 psiP_1 = 320\text{ psi} and A2=5.85 in2A_2 = 5.85\text{ in}^2: F2=320 psi×5.85 in2=1872 lbfF_2 = 320\text{ psi} \times 5.85\text{ in}^2 = 1872\text{ lbf}.

  3. Convert pounds-force to newtons: 1872 lbf×4.44822Nlbf=8327.1 N1872\text{ lbf} \times 4.44822\frac{\text{N}}{\text{lbf}} = 8327.1\text{ N}.

  4. Convert newtons to kilonewtons: 8327.1 N1000 N/kN≈8.33 kN\frac{8327.1\text{ N}}{1000\text{ N/kN}} \approx 8.33\text{ kN}.

Final answer

(a) P1=2.21×103 kPaP_1 = 2.21 \times 10^3\text{ kPa}; (b) F2=8.33 kNF_2 = 8.33\text{ kN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always match the area subscript to the cylinder being analyzed (F1=PA1F_1 = P A_1 for input, F2=PA2F_2 = P A_2 for output).

  • Verify that hydraulic force multipliers give F2>F1F_2 > F_1 whenever A2>A1A_2 > A_1.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert Pa to kPa in part (a), leaving the pressure in pascals while labeling it as kilopascals.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P1=320×6894.76  ⟹  P1=2206323.2 kPaP_1 = 320 \times 6894.76 \implies P_1 = 2206323.2\text{ kPa}

    Correct

    P1=320 psi×6894.76Papsi=2.20632×106 Pa=2.21×103 kPaP_1 = 320\text{ psi} \times 6894.76\frac{\text{Pa}}{\text{psi}} = 2.20632 \times 10^6\text{ Pa} = 2.21 \times 10^3\text{ kPa}

    Multiplying by 6894.76 Pa/psi6894.76\text{ Pa/psi} converts pounds per square inch into pascals (Pa\text{Pa}), not kilopascals (kPa\text{kPa}). To convert pascals to kilopascals, you need to divide by 10001000.

  2. Step 2

    F2=P1×A2  ⟹  F2=320×5.85=1872 lbfF_2 = P_1 \times A_2 \implies F_2 = 320 \times 5.85 = 1872\text{ lbf}

  3. Step 3

    F2=1872×4.44822 N=8326.97 N  ⟹  F2=8.33 kNF_2 = 1872 \times 4.44822\text{ N} = 8326.97\text{ N} \implies F_2 = 8.33\text{ kN}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Pascal's principle to relate fluid pressure to the output force.

You accurately converted pounds-force to kilonewtons in part (b) with proper rounding.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing SI prefix scaling

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the base unit conversion factor from psi\text{psi} to Pa\text{Pa} as directly yielding the prefixed unit kPa\text{kPa}, skipping the metric prefix conversion step (1 kPa=103 Pa1\text{ kPa} = 10^3\text{ Pa}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Track base vs. prefixed metric units
  • 1 kPa=103 Pa=1000 Pa1\text{ kPa} = 10^3\text{ Pa} = 1000\text{ Pa}

  • Always write down the intermediate unit (Pa\text{Pa}) when applying the given conversion factor before scaling by metric prefixes like kilo- (k\text{k}). Divide by 10310^3 to reach kPa\text{kPa}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. P1=320×6894.76 Pa=2.20632×106 PaP_1 = 320 \times 6894.76\text{ Pa} = 2.20632 \times 10^6\text{ Pa}

  2. P1=2.20632×106 Pa103 Pa/kPa≈2.21×103 kPaP_1 = \frac{2.20632 \times 10^6\text{ Pa}}{10^3\text{ Pa/kPa}} \approx 2.21 \times 10^3\text{ kPa}

Final answer

(a) P1=2.21×103 kPaP_1 = 2.21 \times 10^3\text{ kPa}; (b) F2=8.33 kNF_2 = 8.33\text{ kN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include explicit unit labels next to each number during multi-step unit conversions.

  • Practice converting values between base units (Pa\text{Pa}, N\text{N}) and prefixed units (kPa\text{kPa}, MPa\text{MPa}, kN\text{kN}).

Lock it in

Similar question

01

A hydraulic press has a working fluid pressure of P=450 psiP = 450\text{ psi}. What force FF (in lbf\text{lbf}) does this fluid exert on an output ram with a cross-sectional area of A=4.20 in2A = 4.20\text{ in}^2?

Answer

F=1890 lbfF = 1890\text{ lbf}. Using F=P⋅AF = P \cdot A: F=450 psi×4.20 in2=1890 lbfF = 450\text{ psi} \times 4.20\text{ in}^2 = 1890\text{ lbf}.

02

A master cylinder exerts a force of F1=120 NF_1 = 120\text{ N} on an area of A1=3.00 cm2A_1 = 3.00\text{ cm}^2. The enclosed fluid connects to a slave cylinder with an area of A2=45.0 cm2A_2 = 45.0\text{ cm}^2. Find (a) the fluid pressure PP in kPa\text{kPa}, and (b) the output force F2F_2 delivered by the slave cylinder in N\text{N}.

Answer

(a) P=400 kPaP = 400\text{ kPa}; (b) F2=1800 NF_2 = 1800\text{ N}. Pressure is P=F1A1=120 N3.00×10−4 m2=4.00×105 Pa=400 kPaP = \frac{F_1}{A_1} = \frac{120\text{ N}}{3.00 \times 10^{-4}\text{ m}^2} = 4.00 \times 10^5\text{ Pa} = 400\text{ kPa}. By Pascal's principle, F2=P⋅A2=(4.00×105 Pa)×(45.0×10−4 m2)=1800 NF_2 = P \cdot A_2 = (4.00 \times 10^5\text{ Pa}) \times (45.0 \times 10^{-4}\text{ m}^2) = 1800\text{ N} (or F2=F1⋅A2A1=120×15=1800 NF_2 = F_1 \cdot \frac{A_2}{A_1} = 120 \times 15 = 1800\text{ N}).

03

A hydraulic car lift operates with an output piston diameter of d2=28.0 cmd_2 = 28.0\text{ cm}. What gauge pressure PP (in kPa\text{kPa}) must the fluid maintain to support a vehicle of mass m=2400 kgm = 2400\text{ kg}? (Take g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

P≈382 kPaP \approx 382\text{ kPa}. The required lifting force is F2=mg=2400 kg×9.80 m/s2=23520 NF_2 = mg = 2400\text{ kg} \times 9.80\text{ m/s}^2 = 23520\text{ N}. The piston area is A2=π(0.280 m2)2≈0.061575 m2A_2 = \pi \left(\frac{0.280\text{ m}}{2}\right)^2 \approx 0.061575\text{ m}^2. Thus, P=F2A2=23520 N0.061575 m2≈3.82×105 Pa=382 kPaP = \frac{F_2}{A_2} = \frac{23520\text{ N}}{0.061575\text{ m}^2} \approx 3.82 \times 10^5\text{ Pa} = 382\text{ kPa}.

Loading workspace…