Resources
An engineering model represents the collision force between a robotic bumper of mass and an obstacle as an exponential pulse: for , where and is the characteristic relaxation time. The bumper is initially traveling toward the obstacle with speed in the -direction, and the force acts in the -direction (). (a) Derive an expression for the total asymptotic impulse and compute its numerical value. (b) Determine the final asymptotic velocity of the bumper as .
Answer and steps
Final answer
(a) ; (b) (rebounding in the -direction at ).
Steps
Part (a): Total Asymptotic Impulse
The impulse delivered by a time-varying force over a time interval is given by the definite integral of the force with respect to time:
Evaluating the improper integral:
Convert the relaxation time to standard SI units:
Substitute the given values into the expression:
Part (b): Final Asymptotic Velocity
By the impulse-momentum theorem, the net impulse on an object equals its change in linear momentum:
Rearranging to solve for the final asymptotic velocity :
Substitute the given mass , initial velocity , and impulse :
The negative sign indicates that the bumper reverses direction, rebounding along the -direction with a speed of .
Key Pitfall to Avoid
- Unit conversion: Ensure is converted from milliseconds () to seconds (). Omitting this conversion results in an impulse that is three orders of magnitude too large.
- Vector signs: Take care to keep track of directional signs; treating the resistive force as positive would predict an acceleration instead of a deceleration and rebound.
Typical errors
01 The student forgets to convert the characteristic time from milliseconds to seconds, leading to an impulse and velocity change three orders of magnitude too large.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You substituted directly without converting milliseconds to seconds (), leading to an impulse that is times too large.
- Step 3
- Step 4Correct
Your arithmetic and substitution follow correctly from your earlier impulse value, but the result is skewed because of the millisecond conversion error in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou evaluated the improper integral of the exponential decaying force accurately.
You correctly related impulse to the change in linear momentum using the impulse-momentum theorem.
You handled the directional signs consistently throughout your algebraic work.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked the metric prefix 'milli-' on the time parameter , substituting the raw numerical value into an expression requiring standard SI base units (seconds).
REASONING PATH
Your ACEpath teacher’s suggested approach- Check SI Base Units Before Calculating
Every parameter substituted into standard SI formulas () must use base units (seconds, meters, kilograms).
Scan all given numbers for metric prefixes (, , ) and rewrite them in scientific notation () before substituting.
- Perform a Physical Sanity Check
A small bumper rebounding from an obstacle should not realistically achieve thousands of meters per second from a short collision pulse.
Compare your calculated rebound speed () to the initial speed () to catch magnitude errors immediately.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the characteristic relaxation time to seconds: .
Recompute the total asymptotic impulse: .
Substitute into the velocity equation: .
, (rebounding in the -direction at )
02 The student ignores the negative sign of the force acting in the -x-direction, treating the impulse as positive and causing the bumper to speed up rather than reverse direction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You integrated the positive magnitude rather than the vector component . Because the obstacle pushes backward in the -direction, the impulse must be negative.
- Step 2Correct
You correctly converted to and multiplied the values, but the missing negative sign from Step 1 carried through.
- Step 3
- Step 4Correct
Your arithmetic was carried out accurately, but using a positive impulse caused the bumper to speed up forward to instead of slowing down and rebounding at .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly integrated the exponential function and evaluated the limits from to .
You converted the relaxation time from milliseconds to seconds correctly.
You correctly formulated the impulse-momentum theorem to relate impulse to change in velocity.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou dropped the negative sign on the force component , computing an impulse of instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating vector components as scalar magnitudes without assigning a coordinate sign leads opposing forces to add momentum rather than remove it, producing an unphysical speed increase during a collision.
REASONING PATH
Your ACEpath teacher’s suggested approach- Vector Component Check
Impulse in one dimension is defined using the signed component , not just the force magnitude.
Before integrating, explicitly write the force with its directional sign based on your chosen coordinate axis (here, ).
- Physical Sanity Check
A collision with a stationary obstacle must exert a retarding force that decreases forward momentum or reverses direction.
Check your final velocity: if in the same direction after hitting an obstacle, verify the sign of your impulse.
CORRECTED PATH
ACEpath Teacher's DemonstrationInclude the negative sign for the force acting in the -direction: .
Integrate to find total asymptotic impulse: .
Substitute numerical values with SI conversion: .
Apply the impulse-momentum theorem: .
(a) ; (b) (rebounding in the -direction at )
03 The student incorrectly calculates the integral of e^{-t/\tau} by multiplying by -1/\tau rather than dividing, obtaining -F_0/\tau for the impulse.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When integrating an exponential function , here . Dividing by is equivalent to multiplying by , so . You divided by instead of multiplying by .
- Step 3Correct
You converted to correctly, but evaluating the incorrect symbolic formula produced instead of .
- Step 4
- Step 5Correct
Your numerical substitution and arithmetic are consistent with your earlier impulse value, but propagate the integration error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that total impulse is the integral of force with respect to time over the interval .](streamdown:incomplete-link)
You correctly converted milliseconds to seconds when substituting values.
You applied the impulse-momentum theorem with the proper algebraic rearrangement and signs.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided by the decay constant rather than dividing by the exponent coefficient when finding the antiderivative.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing differentiation and integration of exponential functions of the form : differentiating brings down a factor of , whereas integrating divides by , which introduces an overall factor of . Dimensional analysis ( vs. ) would immediately reveal that has units of rather than impulse units of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Exponential Antiderivative Rule
. For , .
Always multiply by the reciprocal of the inner derivative when performing linear -substitution.
- Dimensional Consistency Check
Impulse has dimensions of .
Check your algebraic result before plugging in numbers: has units , while has units .
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the integral: .
Substitute numerical values: .
Apply the impulse-momentum theorem: .
(a) ; (b) (or rebounding at in the -direction)
Lock it in
How do you convert a time given in milliseconds () into standard SI units of seconds ()?
Multiply by (or divide by ): . Principle: requires time in seconds.
Similar question
A force pulse acts on a stationary puck in the -direction for . Find the total impulse delivered as and the puck's final speed.
Answer
. Final speed: .
A cart moves with velocity . A braking mechanism exerts a retarding force where and . Does the cart come to rest or rebound, and what is its final velocity as ?
Answer
Impulse: . Final velocity: . The cart comes to a complete stop.
A bumper collision is modeled by a triangular force pulse lasting with peak force directed against an incoming object (). Determine the impulse and final velocity of the object.
Answer
Impulse: . Final velocity: (rebounds at ).