Resources

A doubly charged ion (q=2e=3.204×10−19 Cq = 2e = 3.204 \times 10^{-19}\text{ C}) with an atomic mass of 56.0 u56.0\text{ u} (1 u=1.661×10−27 kg1\text{ u} = 1.661 \times 10^{-27}\text{ kg}) is accelerated to a kinetic energy of K=45.0 keVK = 45.0\text{ keV}. It then enters a uniform magnetic field of magnitude B=850 mTB = 850\text{ mT} at right angles to the field lines. Calculate the orbital period TT of the ion in nanoseconds (ns\text{ns}).

Answer and steps

Final answer

T=2.15×103 nsT = 2.15 \times 10^{3}\text{ ns}

Steps

01

Identify the Governing Relationship for Circular Motion in a Magnetic Field

When a charged particle enters a uniform magnetic field B⃗\vec{B} perpendicular to its velocity v⃗\vec{v}, the magnetic Lorentz force acts as the centripetal force:

FB=qvB=mv2rF_B = q v B = \frac{m v^2}{r}

Solving for the radius of the circular path rr:

r=mvqBr = \frac{m v}{q B}

02

Express the Orbital Period

The orbital period TT is the time required to complete one full circular orbit of circumference 2πr2\pi r:

T=2πrv=2π(mvqB)v=2πmqBT = \frac{2\pi r}{v} = \frac{2\pi \left(\frac{m v}{q B}\right)}{v} = \frac{2\pi m}{q B}

Key Takeaway & Common Pitfall: The orbital period TT depends only on the mass mm, charge qq, and magnetic field strength BB. It is completely independent of the particle's speed vv and kinetic energy KK. Calculating the ion's speed from K=45.0 keVK = 45.0\text{ keV} is unnecessary and can introduce rounding errors.

03

Calculate the Mass and Period

Convert the given quantities into standard SI units:

  • Mass of the ion: m=56.0 u⋅(1.661×10−27 kg/u)≈9.3016×10−26 kgm = 56.0\text{ u} \cdot (1.661 \times 10^{-27}\text{ kg/u}) \approx 9.3016 \times 10^{-26}\text{ kg}
  • Charge of the ion: q=3.204×10−19 Cq = 3.204 \times 10^{-19}\text{ C}
  • Magnetic field magnitude: B=850 mT=0.850 TB = 850\text{ mT} = 0.850\text{ T}

Substitute these values into the period formula:

T=2π(9.3016×10−26 kg)(3.204×10−19 C)(0.850 T)T = \frac{2\pi (9.3016 \times 10^{-26}\text{ kg})}{(3.204 \times 10^{-19}\text{ C})(0.850\text{ T})}

T≈5.8444×10−252.7234×10−19 s≈2.146×10−6 sT \approx \frac{5.8444 \times 10^{-25}}{2.7234 \times 10^{-19}}\text{ s} \approx 2.146 \times 10^{-6}\text{ s}

04

Convert to Nanoseconds

Convert seconds to nanoseconds (1 s=109 ns1\text{ s} = 10^9\text{ ns}):

T=2.146×10−6 s×109 ns/s≈2.15×103 nsT = 2.146 \times 10^{-6}\text{ s} \times 10^9\text{ ns/s} \approx 2.15 \times 10^3\text{ ns}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the elementary charge e instead of the doubly charged ion's charge q = 2e, doubling the calculated orbital period to approximately 4290 ns.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=56.0×1.661×10−27 kg=9.302×10−26 kgm = 56.0 \times 1.661 \times 10^{-27}\text{ kg} = 9.302 \times 10^{-26}\text{ kg}

  2. Step 2

    q=1.602×10−19 Cq = 1.602 \times 10^{-19}\text{ C}, B=0.850 TB = 0.850\text{ T}

    Correct

    q=2e=3.204×10−19 Cq = 2e = 3.204 \times 10^{-19}\text{ C}, B=0.850 TB = 0.850\text{ T}

    The problem states that the ion is doubly charged, meaning q=2e=3.204×10−19 Cq = 2e = 3.204 \times 10^{-19}\text{ C}, but you substituted the charge of a singly charged particle.

  3. Step 3

    T=2πmqB=2π×9.302×10−261.602×10−19×0.850T = \frac{2\pi m}{q B} = \frac{2\pi \times 9.302 \times 10^{-26}}{1.602 \times 10^{-19} \times 0.850}

    Correct

    T=2πmqB=2π×9.302×10−26 kg(3.204×10−19 C)(0.850 T)T = \frac{2\pi m}{q B} = \frac{2\pi \times 9.302 \times 10^{-26}\text{ kg}}{(3.204 \times 10^{-19}\text{ C})(0.850\text{ T})}

    Your formula selection is correct, but this substitution inherited the incorrect charge from the previous step.

  4. Step 4

    T=4.29×10−6 s=4290 nsT = 4.29 \times 10^{-6}\text{ s} = 4290\text{ ns}

    Correct

    T≈2.15×10−6 s=2.15×103 nsT \approx 2.15 \times 10^{-6}\text{ s} = 2.15 \times 10^{3}\text{ ns}

    Because the charge in the denominator was halved, your calculated period came out twice as large as the actual value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the orbital period formula T=2πmqBT = \frac{2\pi m}{q B} for circular motion in a magnetic field.

You correctly ignored the superfluous kinetic energy value when calculating the orbital period.

You converted units for mass, magnetic field, and time into appropriate SI and prefixed units without calculation errors.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Ion Charge State

You wrote q=1.602×10−19 Cq = 1.602 \times 10^{-19}\text{ C} instead of doubling the elementary charge for a doubly charged ion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the ionization state ('doubly charged ion', q=2eq = 2e) when extracting given parameters led to using the elementary charge ee by default.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Ion Charge State
  • For an ion with charge state ZZ, the total charge is q=Zeq = Z e.

  • Always circle words like 'singly', 'doubly' (Z=2Z=2), or 'alpha particle' (Z=2Z=2) before plugging values into qq.

Proportionality Verification
  • Orbital period TT is inversely proportional to charge qq (T∝1qT \propto \frac{1}{q}).

  • Verify that a higher charge leads to a stronger magnetic deflecting force and therefore a shorter orbital period.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the correct ion charge: q=2e=2(1.602×10−19 C)=3.204×10−19 Cq = 2e = 2(1.602 \times 10^{-19}\text{ C}) = 3.204 \times 10^{-19}\text{ C}.

  2. Substitute the corrected charge into the period formula: T=2π(9.302×10−26 kg)(3.204×10−19 C)(0.850 T)T = \frac{2\pi (9.302 \times 10^{-26}\text{ kg})}{(3.204 \times 10^{-19}\text{ C})(0.850\text{ T})}.

  3. Evaluate the arithmetic: T≈2.146×10−6 sT \approx 2.146 \times 10^{-6}\text{ s}.

  4. Convert to nanoseconds: T=2.146×10−6×109 ns≈2.15×103 nsT = 2.146 \times 10^{-6} \times 10^9\text{ ns} \approx 2.15 \times 10^3\text{ ns}.

Final answer

T=2.15×103 nsT = 2.15 \times 10^{3}\text{ ns}

NEXT STEPS
Final Takeaways from Your Teacher
  • Pay special attention to prefixes and charge descriptors like 'doubly ionized' or 'alpha particle' when recording known quantities.

  • Practice identifying whether the orbital period in a magnetic field depends on velocity or kinetic energy.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly assumes orbital period depends on velocity and kinetic energy, calculating T = 2πr/v by mistaking the orbital frequency formula as T = 2πK/(qBv).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=56.0×1.661×10−27 kg=9.302×10−26 kgm = 56.0 \times 1.661 \times 10^{-27}\text{ kg} = 9.302 \times 10^{-26}\text{ kg}

  2. Step 2

    K=45.0 keV=45.0×103×1.602×10−19 J=7.209×10−15 J  ⟹  v=2Km=2×7.209×10−159.302×10−26=3.937×105 m/sK = 45.0\text{ keV} = 45.0 \times 10^3 \times 1.602 \times 10^{-19}\text{ J} = 7.209 \times 10^{-15}\text{ J} \implies v = \sqrt{\frac{2K}{m}} = \sqrt{\frac{2 \times 7.209 \times 10^{-15}}{9.302 \times 10^{-26}}} = 3.937 \times 10^5\text{ m/s}

  3. Step 3

    r=mvqB=9.302×10−26×3.937×1053.204×10−19×0.850=0.1345 mr = \frac{mv}{qB} = \frac{9.302 \times 10^{-26} \times 3.937 \times 10^5}{3.204 \times 10^{-19} \times 0.850} = 0.1345\text{ m}

  4. Step 4

    T=2πr=2π×0.1345=0.845 s=8.45×108 nsT = 2\pi r = 2\pi \times 0.1345 = 0.845\text{ s} = 8.45 \times 10^8\text{ ns}

    Correct

    T=2πrv=2π(0.1345 m)3.937×105 m/s≈2.15×10−6 s=2.15×103 nsT = \frac{2\pi r}{v} = \frac{2\pi (0.1345\text{ m})}{3.937 \times 10^5\text{ m/s}} \approx 2.15 \times 10^{-6}\text{ s} = 2.15 \times 10^3\text{ ns}

    You computed the orbital circumference 2πr2\pi r rather than the orbital period T=2πrvT = \frac{2\pi r}{v}. Period has units of time, so distance must be divided by speed.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted mass, energy, and magnetic field into standard SI units with high precision.

You correctly used kinetic energy to find the velocity of the ion.

You correctly set the magnetic force equal to the centripetal force to find the radius of the circular orbit.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion between circumference and period

You calculated the orbit's spatial circumference 2πr2\pi r and labeled it as the time period TT, omitting the division by speed vv.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated period as a length rather than a time interval. Furthermore, calculating vv and rr separately obscured the direct formula for cyclotron period, T=2πmqBT = \frac{2\pi m}{qB}, which is completely independent of velocity and radius.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency Check
  • The period TT is a duration (units of seconds), whereas 2πr2\pi r is a distance (units of meters).

  • Always check units: Period=DistanceSpeed=2πrv\text{Period} = \frac{\text{Distance}}{\text{Speed}} = \frac{2\pi r}{v}.

Cyclotron Period Independence
  • For a charged particle in a perpendicular uniform magnetic field, substituting r=mvqBr = \frac{mv}{qB} into T=2πrvT = \frac{2\pi r}{v} gives T=2πmqBT = \frac{2\pi m}{qB}.

  • Use T=2πmqBT = \frac{2\pi m}{qB} directly to save computation time and eliminate reliance on vv or KK.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. T=2πmqB=2π(9.302×10−26 kg)(3.204×10−19 C)(0.850 T)T = \frac{2\pi m}{qB} = \frac{2\pi (9.302 \times 10^{-26}\text{ kg})}{(3.204 \times 10^{-19}\text{ C})(0.850\text{ T})}

  2. T=5.8446×10−252.7234×10−19 s≈2.146×10−6 sT = \frac{5.8446 \times 10^{-25}}{2.7234 \times 10^{-19}}\text{ s} \approx 2.146 \times 10^{-6}\text{ s}

  3. T=2.146×10−6 s×109 ns/s≈2.15×103 nsT = 2.146 \times 10^{-6}\text{ s} \times 10^9\text{ ns/s} \approx 2.15 \times 10^3\text{ ns}

Final answer

T=2.15×103 nsT = 2.15 \times 10^3\text{ ns}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that orbital period is time per revolution, so you must divide distance by speed: T=2πrvT = \frac{2\pi r}{v}.

  • Notice that substituting r=mvqBr = \frac{mv}{qB} cancels vv, yielding T=2πmqBT = \frac{2\pi m}{qB}. Use this direct formula whenever you need the cyclotron period or frequency.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the magnetic field from milliteslas (mT) to teslas (T), using B = 850 instead of 0.850 T, resulting in a period that is 1000 times too small (2.15 ns).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=56.0×1.661×10−27 kg=9.302×10−26 kgm = 56.0 \times 1.661 \times 10^{-27}\text{ kg} = 9.302 \times 10^{-26}\text{ kg}

  2. Step 2

    q=3.204×10−19 C  ⟹  B=850 Tq = 3.204 \times 10^{-19}\text{ C} \implies B = 850\text{ T}

    Correct

    q=3.204×10−19 C,  B=850 mT=0.850 Tq = 3.204 \times 10^{-19}\text{ C},\; B = 850\text{ mT} = 0.850\text{ T}

    You recorded the magnetic field magnitude as 850 T850\text{ T} rather than converting from milliteslas (mT\text{mT}) to teslas (T\text{T}). Since the prefix milli- means 10−310^{-3}, 850 mT=850×10−3 T=0.850 T850\text{ mT} = 850 \times 10^{-3}\text{ T} = 0.850\text{ T}.

  3. Step 3

    T=2πmqB  ⟹  T=2π×9.302×10−263.204×10−19×850T = \frac{2\pi m}{q B} \implies T = \frac{2\pi \times 9.302 \times 10^{-26}}{3.204 \times 10^{-19} \times 850}

    Correct

    T=2πmqB=2π(9.302×10−26 kg)(3.204×10−19 C)(0.850 T)T = \frac{2\pi m}{q B} = \frac{2\pi (9.302 \times 10^{-26}\text{ kg})}{(3.204 \times 10^{-19}\text{ C})(0.850\text{ T})}

    Your algebraic formula is completely correct, but substituting B=850 TB = 850\text{ T} carried forward the unit conversion error.

  4. Step 4

    T=2.146×10−9 s=2.15 nsT = 2.146 \times 10^{-9}\text{ s} = 2.15\text{ ns}

    Correct

    T≈2.146×10−6 s=2.15×103 nsT \approx 2.146 \times 10^{-6}\text{ s} = 2.15 \times 10^{3}\text{ ns}

    Your arithmetic and conversion from seconds to nanoseconds were executed correctly based on your substituted numbers, but the result is 10001000 times too small due to the unconverted field value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the orbital period is independent of the particle's speed and kinetic energy.

You correctly converted the atomic mass from atomic mass units (u\text{u}) to kilograms.

You selected and evaluated the correct cyclotron period formula T=2πmqBT = \frac{2\pi m}{qB}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing metric prefix conversion (mT to T)

You wrote B=850 TB = 850\text{ T} instead of converting 850 mT850\text{ mT} into standard SI units (0.850 T0.850\text{ T}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking metric prefixes during the initial parameter setup before substituting values into standard SI formulas.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Unit Consistency Check
  • Formulas involving derived SI units (such as T=NA⋅m\text{T} = \frac{\text{N}}{\text{A}\cdot\text{m}}) require all base quantities to be in standard SI base or coherent derived units (e.g., T\text{T}, kg\text{kg}, C\text{C}, s\text{s}) with metric prefixes converted to powers of ten.

  • Before substituting into any formula, write out every parameter with its metric prefix expanded (e.g., m=10−3\text{m} = 10^{-3}, μ=10−6\mu = 10^{-6}, k=103\text{k} = 10^3).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the magnetic field from milliteslas to teslas: B=850 mT=850×10−3 T=0.850 TB = 850\text{ mT} = 850 \times 10^{-3}\text{ T} = 0.850\text{ T}.

  2. Substitute the standard SI values into the orbital period formula: T=2π(9.302×10−26 kg)(3.204×10−19 C)(0.850 T)≈2.146×10−6 sT = \frac{2\pi (9.302 \times 10^{-26}\text{ kg})}{(3.204 \times 10^{-19}\text{ C})(0.850\text{ T})} \approx 2.146 \times 10^{-6}\text{ s}.

  3. Convert seconds to nanoseconds using 1 s=109 ns1\text{ s} = 10^{9}\text{ ns}: T=2.146×10−6×109 ns=2.15×103 nsT = 2.146 \times 10^{-6} \times 10^9\text{ ns} = 2.15 \times 10^3\text{ ns}.

Final answer

T=2.15×103 nsT = 2.15 \times 10^{3}\text{ ns}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out given values with their explicit unit prefixes converted to powers of 1010 before performing algebraic substitutions.

  • Review common SI metric prefixes ("m"=10−3"\text{m}" = 10^{-3}, "μ"=10−6"\mu" = 10^{-6}, "n"=10−9"\text{n}" = 10^{-9}) to ensure you never drop them when recording givens.

Lock it in

Similar question

01

An alpha particle (m=6.64×10−27 kgm = 6.64 \times 10^{-27}\text{ kg}, doubly charged with q=2e=3.204×10−19 Cq = 2e = 3.204 \times 10^{-19}\text{ C}) enters a uniform magnetic field of B=0.500 TB = 0.500\text{ T} perpendicular to the field. Calculate its orbital period TT in nanoseconds.

Answer

T=261 nsT = 261\text{ ns}. Key steps: T=2πmqB=2π(6.64×10−27 kg)(3.204×10−19 C)(0.500 T)≈2.605×10−7 s=261 nsT = \frac{2\pi m}{qB} = \frac{2\pi (6.64 \times 10^{-27}\text{ kg})}{(3.204 \times 10^{-19}\text{ C})(0.500\text{ T})} \approx 2.605 \times 10^{-7}\text{ s} = 261\text{ ns}.

02

A triply ionized carbon ion (12C3+^{12}\text{C}^{3+}, m=12.0 um = 12.0\text{ u}, q=3eq = 3e) and a singly ionized carbon ion (12C+^{12}\text{C}^{+}, m=12.0 um = 12.0\text{ u}, q=1eq = 1e) enter the same uniform magnetic field with the same kinetic energy. Find the ratio of their orbital periods, T3+T+\frac{T_{3+}}{T_{+}}.

Answer

T3+T+=13\frac{T_{3+}}{T_{+}} = \frac{1}{3}. Key steps: Since T=2πmqBT = \frac{2\pi m}{qB}, period is inversely proportional to charge when mass and magnetic field are identical: T3+T+=q+q3+=e3e=13\frac{T_{3+}}{T_{+}} = \frac{q_{+}}{q_{3+}} = \frac{e}{3e} = \frac{1}{3}.

03

A doubly charged ion (q=2eq = 2e) of unknown mass has an orbital period of T=1.20 μsT = 1.20\ \mu\text{s} in a magnetic field of B=0.400 TB = 0.400\text{ T}. Determine the atomic mass of the ion in atomic mass units (u\text{u}), given 1 u=1.661×10−27 kg1\text{ u} = 1.661 \times 10^{-27}\text{ kg}.

Answer

m≈14.7 um \approx 14.7\text{ u}. Key steps: Solve for mass m=qBT2π=(3.204×10−19 C)(0.400 T)(1.20×10−6 s)2π≈2.448×10−26 kgm = \frac{q B T}{2\pi} = \frac{(3.204 \times 10^{-19}\text{ C})(0.400\text{ T})(1.20 \times 10^{-6}\text{ s})}{2\pi} \approx 2.448 \times 10^{-26}\text{ kg}. Divide by 1.661×10−27 kg/u1.661 \times 10^{-27}\text{ kg/u} to get m≈14.7 um \approx 14.7\text{ u}.

Loading workspace…