Resources

A research spacecraft of mass m=850 kgm = 850\text{ kg} is traveling through deep space with an initial velocity of v0=1.20×104 m/sv_0 = 1.20\times 10^4\text{ m/s} when it enters a dilute interstellar dust cloud. The cloud exerts a velocity-dependent resistive drag force on the craft modeled as F(v)=−αvF(v) = -\alpha v, where α=0.0450 N⋅s/m\alpha = 0.0450\text{ N}\cdot\text{s/m}. No propulsion is active. Derive the spacecraft velocity v(t)v(t) as a function of time tt, and determine the total instantaneous mechanical power dissipated by the drag force as t→0+t \to 0^+ (P0P_0) and as t→∞t \to \infty (P∞P_\infty).

Answer and steps

Final answer

v(t)=v0e−αmtv(t) = v_0 e^{-\frac{\alpha}{m} t}; at t→0+t \to 0^+, P0=−6.48×106 WP_0 = -6.48\times 10^6\text{ W} (or −6.48 MW-6.48\text{ MW} dissipated); as t→∞t \to \infty, P∞=0 WP_\infty = 0\text{ W}.

Steps

01

Set up the differential equation of motion

According to Newton's second law, the net force acting on the spacecraft equals its mass times acceleration:

mdvdt=F(v)m \frac{dv}{dt} = F(v)

Substitute the velocity-dependent resistive drag force F(v)=−αvF(v) = -\alpha v:

mdvdt=−αvm \frac{dv}{dt} = -\alpha v

02

Separate variables and integrate to find v(t)v(t)

Separate the variables vv and tt:

1v dv=−αm dt\frac{1}{v}\,dv = -\frac{\alpha}{m}\,dt

Integrate both sides from the initial conditions at t=0t = 0 (where v=v0v = v_0) to time tt (where velocity is v(t)v(t)):

∫v0v(t)1v dv=−∫0tαm dt′\int_{v_0}^{v(t)} \frac{1}{v}\,dv = -\int_0^t \frac{\alpha}{m}\,dt'

ln⁡(v(t)v0)=−αmt\ln\left(\frac{v(t)}{v_0}\right) = -\frac{\alpha}{m}t

Exponentiate both sides to solve for v(t)v(t):

v(t)=v0e−αmtv(t) = v_0 e^{-\frac{\alpha}{m} t}

03

Determine the instantaneous mechanical power

The instantaneous mechanical power exerted by a force F⃗\vec{F} on an object moving with velocity v⃗\vec{v} is given by:

P(t)=F⃗⋅v⃗P(t) = \vec{F} \cdot \vec{v}

Since the drag force opposes the direction of motion, F⃗\vec{F} and v⃗\vec{v} are antiparallel:

P(t)=(−αv)⋅v=−αv2(t)P(t) = (-\alpha v) \cdot v = -\alpha v^2(t)

Substitute the expression for v(t)v(t):

P(t)=−α(v0e−αmt)2=−αv02e−2αmtP(t) = -\alpha \left(v_0 e^{-\frac{\alpha}{m} t}\right)^2 = -\alpha v_0^2 e^{-\frac{2\alpha}{m} t}

The negative sign signifies that energy is continuously removed from the spacecraft (dissipated into the dust cloud as thermal energy and disturbance).

04

Evaluate the power at t→0+t \to 0^+ and t→∞t \to \infty

  1. As t→0+t \to 0^+ (P0P_0): P0=−αv02P_0 = -\alpha v_0^2 Substitute the given values α=0.0450 N⋅s/m\alpha = 0.0450\text{ N}\cdot\text{s/m} and v0=1.20×104 m/sv_0 = 1.20\times 10^4\text{ m/s}: P0=−(0.0450 N⋅s/m)⋅(1.20×104 m/s)2P_0 = -(0.0450\text{ N}\cdot\text{s/m}) \cdot (1.20\times 10^4\text{ m/s})^2 P0=−(0.0450)⋅(1.44×108 m2/s2)=−6.48×106 W=−6.48 MWP_0 = -(0.0450) \cdot (1.44\times 10^8\text{ m}^2/\text{s}^2) = -6.48\times 10^6\text{ W} = -6.48\text{ MW}
  2. As t→∞t \to \infty (P∞P_\infty): As t→∞t \to \infty, the exponential term e−2αmt→0e^{-\frac{2\alpha}{m} t} \to 0, which yields: P∞=0 WP_\infty = 0\text{ W}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses instantaneous power with the drag force magnitude by omitting the factor of velocity, writing P = F rather than P = Fv.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mdvdt=−αv  ⟹  dvv=−(αm)dt  ⟹  ln⁡(vv0)=−(αm)t  ⟹  v(t)=v0e−(α/m)tm \frac{dv}{dt} = -\alpha v \implies \frac{dv}{v} = -\left(\frac{\alpha}{m}\right)dt \implies \ln\left(\frac{v}{v_0}\right) = -\left(\frac{\alpha}{m}\right)t \implies v(t) = v_0 e^{-(\alpha/m)t}

  2. Step 2

    P(t)=αv(t)P(t) = \alpha v(t)

    Correct

    P(t)=F⃗⋅v⃗=(−αv)v=−αv2(t)P(t) = \vec{F} \cdot \vec{v} = (-\alpha v)v = -\alpha v^2(t)

    Instantaneous mechanical power is the dot product of force and velocity, P=F⃗⋅v⃗=−αv2P = \vec{F} \cdot \vec{v} = -\alpha v^2. You wrote the magnitude of the force F=αvF = \alpha v instead of multiplying the force by velocity.

  3. Step 3

    P0=αv0=0.0450×1.20×104=540 WP_0 = \alpha v_0 = 0.0450 \times 1.20 \times 10^4 = 540\text{ W}

    Correct

    P0=−αv02=−(0.0450 N⋅s/m)(1.20×104 m/s)2=−6.48×106 WP_0 = -\alpha v_0^2 = -(0.0450\text{ N}\cdot\text{s/m})(1.20 \times 10^4\text{ m/s})^2 = -6.48 \times 10^6\text{ W}

    Because you evaluated P=αvP = \alpha v instead of P=−αv2P = -\alpha v^2, your initial power was missing a factor of v0v_0 and resulted in 540 W540\text{ W} instead of −6.48 MW-6.48\text{ MW} (or 6.48 MW6.48\text{ MW} dissipated).

  4. Step 4

    P∞=0 WP_\infty = 0\text{ W}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up Newton's second law with the drag force.

You successfully separated variables and integrated to find the exponential velocity decay v(t)v(t).

You recognized that as time approaches infinity, the dissipated power approaches zero.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of velocity factor in mechanical power

Writing P(t)=αv(t)P(t) = \alpha v(t) instead of P(t)=F(v)⋅v=−αv2(t)P(t) = F(v) \cdot v = -\alpha v^2(t).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating instantaneous mechanical power (P=F⃗⋅v⃗P = \vec{F} \cdot \vec{v}, with units of watts) with force (F=−αvF = -\alpha v, with units of newtons).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional consistency of power
  • Power has dimensions of energy per unit time [M⋅L2⋅T−3][\text{M}\cdot\text{L}^2\cdot\text{T}^{-3}] (Watts), which equals force times velocity [N⋅m/s][\text{N}\cdot\text{m/s}].

  • Always check whether your power formula has units of N⋅m/s\text{N}\cdot\text{m/s}. If an expression has units of N\text{N}, you wrote force, not power.

Definition of mechanical power
  • For a particle moving with velocity v⃗\vec{v} subjected to force F⃗\vec{F}, instantaneous power is P=F⃗⋅v⃗=Fvcos⁡θP = \vec{F} \cdot \vec{v} = F v \cos\theta.

  • Write P=F⃗⋅v⃗P = \vec{F} \cdot \vec{v} explicitly before substituting the force expression.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the fundamental definition of instantaneous mechanical power: P(t)=F⃗⋅v⃗P(t) = \vec{F} \cdot \vec{v}.

  2. Substitute the drag force F⃗=−αv v^\vec{F} = -\alpha v \,\hat{v}: P(t)=(−αv)⋅v=−αv2(t)P(t) = (-\alpha v) \cdot v = -\alpha v^2(t).

  3. Substitute v(t)=v0e−αmtv(t) = v_0 e^{-\frac{\alpha}{m} t} into the power equation: P(t)=−αv02e−2αmtP(t) = -\alpha v_0^2 e^{-\frac{2\alpha}{m} t}.

  4. Evaluate at t→0+t \to 0^+: P0=−(0.0450 N⋅s/m)(1.20×104 m/s)2=−6.48×106 W=−6.48 MWP_0 = -(0.0450\text{ N}\cdot\text{s/m})(1.20 \times 10^4\text{ m/s})^2 = -6.48 \times 10^6\text{ W} = -6.48\text{ MW}.

Final answer

v(t)=v0e−αmtv(t) = v_0 e^{-\frac{\alpha}{m} t}; at t→0+t \to 0^+, P0=−6.48×106 WP_0 = -6.48 \times 10^6\text{ W} (dissipating 6.48 MW6.48\text{ MW}); as t→∞t \to \infty, P∞=0 WP_\infty = 0\text{ W}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the dimensional difference between force (N\text{N}) and power (W=N⋅m/s\text{W} = \text{N}\cdot\text{m/s}).

  • Practice deriving instantaneous power expressions for both linear (F∝vF \propto v) and quadratic (F∝v2F \propto v^2) drag regimes.

OverviewACEpath Teacher's Diagnosis

02 The student omits the negative sign in the equation of motion, treating drag as accelerating the craft exponentially rather than decelerating it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mdvdt=αv  ⟹  dvv=(αm)dtm \frac{dv}{dt} = \alpha v \implies \frac{dv}{v} = \left(\frac{\alpha}{m}\right) dt

    Correct

    mdvdt=−αv  ⟹  dvv=−(αm)dtm \frac{dv}{dt} = -\alpha v \implies \frac{dv}{v} = -\left(\frac{\alpha}{m}\right) dt

    The problem states that the dust cloud exerts a resistive drag force F(v)=−αvF(v) = -\alpha v. Because the force opposes the direction of motion, Newton's second law requires a negative sign: mdvdt=−αvm \frac{dv}{dt} = -\alpha v.

  2. Step 2

    v(t)=v0e(α/m)tv(t) = v_0 e^{(\alpha/m)t}

    Correct

    v(t)=v0e−(α/m)tv(t) = v_0 e^{-(\alpha/m)t}

    Integrating both sides with the correct negative sign yields ln⁡(v(t)v0)=−αmt\ln\left(\frac{v(t)}{v_0}\right) = -\frac{\alpha}{m}t, so the velocity decays exponentially according to v(t)=v0e−αmtv(t) = v_0 e^{-\frac{\alpha}{m} t}.

  3. Step 3

    P(t)=αv2=αv02e2αt/m  ⟹  P0=6.48×106 W, P∞=∞P(t) = \alpha v^2 = \alpha v_0^2 e^{2\alpha t/m} \implies P_0 = 6.48\times 10^6\text{ W},\, P_\infty = \infty

    Correct

    P(t)=−αv2=−αv02e−2αt/m  ⟹  P0=−6.48×106 W, P∞=0 WP(t) = -\alpha v^2 = -\alpha v_0^2 e^{-2\alpha t/m} \implies P_0 = -6.48\times 10^6\text{ W},\, P_\infty = 0\text{ W}

    Because the velocity decays to zero as t→∞t \to \infty, the dissipated power must approach 0 W0\text{ W} rather than diverging to ∞\infty. Additionally, power dissipated by drag is negative (−6.48×106 W-6.48\times 10^6\text{ W}, or 6.48 MW6.48\text{ MW} dissipated).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized Newton's second law and set up separation of variables.

You correctly integrated ∫1v dv\int \frac{1}{v}\,dv into an exponential relationship satisfying the initial velocity v0v_0.

You correctly applied the relationship P=Fv=αv2P = F v = \alpha v^2 to compute the initial numerical power magnitude at t=0t = 0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Negative Sign in Resistive Force Equation

You initially wrote the correct decaying exponential form v(t)=v0e−(α/m)tv(t) = v_0 e^{-(\alpha/m)t}, but crossed it out to match your differential equation without checking whether resistive drag should speed the craft up or slow it down.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the magnitude of a resistive force with its vector component along the direction of motion, leading to a missing negative sign in Newton's second law (mdvdt=−αvm \frac{dv}{dt} = -\alpha v).

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Resistive Forces
  • A resistive or drag force always opposes the direction of velocity (F⃗drag⋅v⃗<0\vec{F}_{\text{drag}} \cdot \vec{v} < 0), so its component along v⃗\vec{v} must carry a negative sign in mdvdt=−Fdragm\frac{dv}{dt} = -F_{\text{drag}} unless velocity is defined in the opposite direction.

  • Before integrating, perform a quick physical reality check: if force is resistive and no thrust exists, does dvdt<0\frac{dv}{dt} < 0 hold for v>0v > 0?

Asymptotic Behavior Check
  • An unpowered object moving through a passive resisting medium must lose kinetic energy and approach rest as t→∞t \to \infty, meaning v(t)→0v(t) \to 0 and P(t)→0P(t) \to 0.

  • Check your solution at t→∞t \to \infty: an exponent of +αmt+\frac{\alpha}{m}t predicts infinite velocity and infinite energy generation, signaling an inverted sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law with the resistive force opposing motion: mdvdt=−αvm \frac{dv}{dt} = -\alpha v.

  2. Separate variables and integrate from t=0t = 0 (v=v0v = v_0) to tt: ∫v0v(t)1v dv=−αm∫0tdt′  ⟹  ln⁡(v(t)v0)=−αmt\int_{v_0}^{v(t)} \frac{1}{v}\,dv = -\frac{\alpha}{m} \int_0^t dt' \implies \ln\left(\frac{v(t)}{v_0}\right) = -\frac{\alpha}{m}t.

  3. Solve for velocity: v(t)=v0e−αmtv(t) = v_0 e^{-\frac{\alpha}{m} t}.

  4. Compute instantaneous power: P(t)=F⃗⋅v⃗=(−αv)v=−αv2(t)=−αv02e−2αmtP(t) = \vec{F} \cdot \vec{v} = (-\alpha v) v = -\alpha v^2(t) = -\alpha v_0^2 e^{-\frac{2\alpha}{m} t}.

  5. Evaluate at t→0+t \to 0^+: P0=−(0.0450 N⋅s/m)(1.20×104 m/s)2=−6.48×106 WP_0 = -(0.0450\text{ N}\cdot\text{s/m})(1.20\times 10^4\text{ m/s})^2 = -6.48\times 10^6\text{ W}.

  6. Evaluate at t→∞t \to \infty: since e−2αmt→0e^{-\frac{2\alpha}{m} t} \to 0, P∞=0 WP_\infty = 0\text{ W}.

Final answer

v(t)=v0e−αmtv(t) = v_0 e^{-\frac{\alpha}{m} t}; P0=−6.48×106 WP_0 = -6.48\times 10^6\text{ W} (6.48 MW6.48\text{ MW} dissipated); P∞=0 WP_\infty = 0\text{ W}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify that your equation of motion yields dvdt<0\frac{dv}{dt} < 0 when passive drag acts on a forward-moving body.

  • Perform a sanity check on asymptotic limits: passive damping must never yield v→∞v \to \infty or P→∞P \to \infty without an external energy source.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to divide by mass m when separating variables, confusing acceleration with net force and yielding an incorrect exponential decay rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    dvdt\frac{dv}{dt} = -α\alpha v   ⟹  \implies dvv\frac{dv}{v} = -α\alpha,dt

    Correct

    m dvdt\frac{dv}{dt} = -α\alpha v   ⟹  \implies dvv\frac{dv}{v} = -αm\frac{\alpha}{m},dt

    Newton's second law states that Fnet=ma=mdvdtF_{\text{net}} = m a = m\frac{dv}{dt}, not simply dvdt\frac{dv}{dt}. You missed dividing by the mass m=850 kgm = 850\text{ kg}, which causes the rate constant to have incorrect physical units.

  2. Step 2

    \ln(vv0)\left(\frac{v}{v_0}\right) = -α\alpha t   ⟹  \implies v(t) = v_0 e^{-α\alpha t}

    Correct

    \ln(vv0)\left(\frac{v}{v_0}\right) = -αm\frac{\alpha}{m}t   ⟹  \implies v(t) = v_0 e^{-αm\frac{\alpha}{m}t}

    Your integration and exponentiation steps were mathematically sound, but they inherited the missing mass factor mm from the differential equation.

  3. Step 3

    P(t) = α\alpha v^2   ⟹  \implies P_0 = α\alpha v_0^2 = 0.0450 ×\times (1.20 ×\times 10^4)^2 = 6.48 ×\times 10^6 W\text{ W}   ⟹  \implies P_∞\infty = 0 W\text{ W}_

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the velocity-dependent drag leads to variable separation and logarithmic integration.

You correctly exponentiated the integrated equation to express velocity as an exponential decay.

You correctly evaluated the dissipated power values at t=0t = 0 and t→∞t \to \infty.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing mass in Newton's second law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated net force directly to acceleration (dvdt\frac{dv}{dt}) instead of mass times acceleration (mdvdtm\frac{dv}{dt}), causing the decay constant to have the dimensions of s−1⋅kg\text{s}^{-1} \cdot \text{kg} rather than s−1\text{s}^{-1}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Newton's Second Law Formulation
  • ∑F=ma=mdvdt\sum F = m a = m \frac{dv}{dt}

  • Always verify that the force expression equals mass times acceleration before separating variables.

Dimensional Consistency Check
  • The argument of an exponential function must be dimensionless ([decay rate⋅t]=1[\text{decay rate} \cdot t] = 1).

  • Check that [αmt]=(N⋅s/mkg)(s)=(kg⋅m/sm⋅kg)(s)=1[\frac{\alpha}{m} t] = (\frac{\text{N}\cdot\text{s/m}}{\text{kg}})(\text{s}) = (\frac{\text{kg}\cdot\text{m/s}}{\text{m}\cdot\text{kg}})(\text{s}) = 1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law with mass included: mdvdt=−αvm \frac{dv}{dt} = -\alpha v.

  2. Separate variables: 1v dv=−αm dt\frac{1}{v}\,dv = -\frac{\alpha}{m}\,dt.

  3. Integrate both sides from (0,v0)(0, v_0) to (t,v)(t, v): ln⁡(v(t)v0)=−αmt\ln\left(\frac{v(t)}{v_0}\right) = -\frac{\alpha}{m}t.

  4. Exponentiate to isolate velocity: v(t)=v0e−αmtv(t) = v_0 e^{-\frac{\alpha}{m}t}.

Final answer

v(t)=v0e−αmtv(t) = v_0 e^{-\frac{\alpha}{m}t}; at t→0+t \to 0^+, P0=−6.48×106 WP_0 = -6.48\times 10^6\text{ W} (dissipating 6.48 MW6.48\text{ MW}); as t→∞t \to \infty, P∞=0 WP_\infty = 0\text{ W}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a quick units check on exponential arguments to confirm they are dimensionless.

  • Explicitly write ΣF=ma\Sigma F = ma before replacing aa with dvdt\frac{dv}{dt} to avoid omitting the mass mm.

Lock it in

Similar question

01

A boat of mass m=500 kgm = 500\text{ kg} coasts in water with a drag force F(v)=−kvF(v) = -k v, where k=70 N⋅s/mk = 70\text{ N}\cdot\text{s/m}. If its current speed is v=4.0 m/sv = 4.0\text{ m/s}, calculate the instantaneous power dissipated by water resistance.

Answer

P=F⃗⋅v⃗=−kv2=−(70 N⋅s/m)(4.0 m/s)2=−1120 WP = \vec{F} \cdot \vec{v} = -k v^2 = -(70\text{ N}\cdot\text{s/m})(4.0\text{ m/s})^2 = -1120\text{ W} (or 1.12 kW1.12\text{ kW} dissipated).

02

A skydiver of mass m=80 kgm = 80\text{ kg} falls under high-speed quadratic air drag Fd=−Dv2F_d = -D v^2, where D=0.25 kg/mD = 0.25\text{ kg/m}. Find an algebraic expression for the instantaneous rate of mechanical energy dissipated by air resistance at terminal velocity vtv_t, and compute its numerical value (g=9.8 m/s2g = 9.8\text{ m/s}^2).

Answer

At terminal velocity, drag balances weight: Dvt2=mg  ⟹  vt=mg/DD v_t^2 = m g \implies v_t = \sqrt{mg/D}. The dissipated power is P=Fd⋅vt=−(Dvt2)vt=−(mg)vt=−(80)(9.8)80×9.80.25=−784×56.0=−4.39×104 WP = F_d \cdot v_t = -(D v_t^2) v_t = -(mg)v_t = -(80)(9.8)\sqrt{\frac{80 \times 9.8}{0.25}} = -784 \times 56.0 = -4.39 \times 10^4\text{ W} (or −43.9 kW-43.9\text{ kW}).

03

A charged micro-particle of mass mm enters a viscous medium at t=0t = 0 with speed v0v_0. The drag force is F(v)=−βvF(v) = -\beta v. By integrating the instantaneous power P(t)=−βv(t)2P(t) = -\beta v(t)^2 from t=0t = 0 to t→∞t \to \infty, prove that the total mechanical work done by the drag force equals the initial kinetic energy −12mv02-\frac{1}{2}mv_0^2.

Answer

From Newton's second law, v(t)=v0e−βmtv(t) = v_0 e^{-\frac{\beta}{m} t}, so P(t)=−βv02e−2βmtP(t) = -\beta v_0^2 e^{-\frac{2\beta}{m} t}. Integrating total work: W=∫0∞P(t) dt=−βv02[−m2βe−2βmt]0∞=−βv02(0−(−m2β))=−12mv02W = \int_0^\infty P(t)\,dt = -\beta v_0^2 \left[ -\frac{m}{2\beta} e^{-\frac{2\beta}{m} t} \right]_0^\infty = -\beta v_0^2 \left(0 - \left(-\frac{m}{2\beta}\right)\right) = -\frac{1}{2}m v_0^2. This directly confirms the work-energy theorem.

Loading workspace…