Resources

A test sample is placed in a tabletop laboratory centrifuge at a radial distance of r=0.150 mr = 0.150\text{ m} from the central axis of rotation. The centrifuge spins steadily such that the sample experiences an inward centripetal acceleration of ac=540 m/s2a_c = 540\text{ m/s}^2. Determine the rotational period TT of the centrifuge.

Answer and steps

Final answer

T=0.105 sT = 0.105\text{ s}

Steps

01

Identify the Given Quantities and Required Variable

  • Radial distance (radius of circular path): r=0.150 mr = 0.150\text{ m}
  • Centripetal acceleration: ac=540 m/s2a_c = 540\text{ m/s}^2
  • Rotational period: TT (to be determined)

02

Connect Centripetal Acceleration to Rotational Period

For an object executing uniform circular motion, centripetal acceleration can be expressed in terms of angular speed ω\omega:

ac=ω2ra_c = \omega^2 r

The angular speed ω\omega is related to the period of rotation TT (the time required to complete one full revolution of 2π rad2\pi\text{ rad}) by:

ω=2πT\omega = \frac{2\pi}{T}

Substituting this expression for ω\omega into the acceleration formula gives:

ac=(2πT)2r=4π2rT2a_c = \left(\frac{2\pi}{T}\right)^2 r = \frac{4\pi^2 r}{T^2}


03

Solve for the Period TT

Rearrange the equation to isolate T2T^2:

T2=4π2racT^2 = \frac{4\pi^2 r}{a_c}

Taking the positive square root on both sides:

T=2πracT = 2\pi \sqrt{\frac{r}{a_c}}


04

Substitute Values and Calculate

Substitute the given numerical values into the formula:

T=2π0.150 m540 m/s2T = 2\pi \sqrt{\frac{0.150\text{ m}}{540\text{ m/s}^2}}

Simplify the fraction under the square root:

0.150540=13600 s2\frac{0.150}{540} = \frac{1}{3600}\text{ s}^2

Now take the square root:

13600 s2=160 s\sqrt{\frac{1}{3600}\text{ s}^2} = \frac{1}{60}\text{ s}

Multiply by 2π2\pi:

T=2π60 s=π30 s≈0.1047 sT = \frac{2\pi}{60}\text{ s} = \frac{\pi}{30}\text{ s} \approx 0.1047\text{ s}

Rounding to three significant figures yields:

T=0.105 sT = 0.105\text{ s}

Common Pitfall: Be careful not to confuse the rotational period TT (seconds per rotation) with the rotational frequency ff (rotations per second, f=1/T≈9.55 Hzf = 1/T \approx 9.55\text{ Hz}). Also ensure that the factor of 2π2\pi is squared along with TT when expanding ω2\omega^2.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to take the square root when solving for angular velocity from a_c = ω²r, resulting in an erroneously large angular speed and an incorrect period.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ac=ω2r  ⟹  540=ω2(0.150)a_c = \omega^2 r \implies 540 = \omega^2(0.150)

  2. Step 2

    ω=5400.150=3600 rad/s\omega = \frac{540}{0.150} = 3600\text{ rad/s}

    Correct

    ω2=5400.150=3600 rad2/s2  ⟹  ω=3600=60 rad/s\omega^2 = \frac{540}{0.150} = 3600\text{ rad}^2/\text{s}^2 \implies \omega = \sqrt{3600} = 60\text{ rad/s}

    Dividing 540540 by 0.1500.150 gives ω2\omega^2, not ω\omega. You needed to take the square root of 36003600 to obtain ω=60 rad/s\omega = 60\text{ rad/s}.

  3. Step 3

    T=2πω=2π3600=π1800 s≈0.00175 sT = \frac{2\pi}{\omega} = \frac{2\pi}{3600} = \frac{\pi}{1800}\text{ s} \approx 0.00175\text{ s}

    Correct

    T=2πω=2π60 s=π30 s≈0.105 sT = \frac{2\pi}{\omega} = \frac{2\pi}{60}\text{ s} = \frac{\pi}{30}\text{ s} \approx 0.105\text{ s}

    Your formula T=2πωT = \frac{2\pi}{\omega} is correct, but your calculation used the un-rooted value ω=3600 rad/s\omega = 3600\text{ rad/s} from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct formula relating centripetal acceleration, angular speed, and radius.

You correctly used the relationship T=2πωT = \frac{2\pi}{\omega} to find the rotational period from angular speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root when isolating squared variable

You dropped the exponent on ω2\omega^2 during algebraic rearrangement without taking the square root of the quotient.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating ω2\omega^2 as ω\omega during division when isolating a squared variable in a kinematic formula.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track powers across algebraic steps
  • When isolating a variable raised to a power, keep the exponent intact until an inverse operation is explicitly applied: x2=A  ⟹  x=Ax^2 = A \implies x = \sqrt{A}.

  • Write ω2=acr\omega^2 = \frac{a_c}{r} first before taking the square root in a separate step: ω=acr\omega = \sqrt{\frac{a_c}{r}}.

Check dimensional units
  • The ratio acr\frac{a_c}{r} has units of m/s2m=s−2\frac{\text{m/s}^2}{\text{m}} = \text{s}^{-2}, which represents rad2/s2\text{rad}^2/\text{s}^2.

  • Verify that your intermediate result has units of rad/s\text{rad/s} by confirming that you took the square root of s−2\text{s}^{-2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ω2=5400.150=3600 rad2/s2\omega^2 = \frac{540}{0.150} = 3600\text{ rad}^2/\text{s}^2

  2. ω=3600=60 rad/s\omega = \sqrt{3600} = 60\text{ rad/s}

  3. T=2πω=2π60 s=π30 s≈0.105 sT = \frac{2\pi}{\omega} = \frac{2\pi}{60}\text{ s} = \frac{\pi}{30}\text{ s} \approx 0.105\text{ s}

Final answer

T=0.105 sT = 0.105\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out intermediate steps explicitly when isolating squared variables such as ω2\omega^2 or v2v^2.

  • Perform a quick mental unit check: confirm that acr\frac{a_c}{r} yields rad2/s2\text{rad}^2/\text{s}^2, requiring a square root to get rad/s\text{rad/s}.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers the centripetal acceleration formula as a_c = ωr instead of a_c = ω²r, leading to an incorrect angular velocity and period.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ac=ωr  ⟹  ω=acr=5400.150=3600 rad/sa_c = \omega r \implies \omega = \frac{a_c}{r} = \frac{540}{0.150} = 3600\text{ rad/s}

    Correct

    ac=ω2r  ⟹  ω=acr=540 m/s20.150 m=60 rad/sa_c = \omega^2 r \implies \omega = \sqrt{\frac{a_c}{r}} = \sqrt{\frac{540\text{ m/s}^2}{0.150\text{ m}}} = 60\text{ rad/s}

    You used ac=ωra_c = \omega r to relate centripetal acceleration and angular velocity. The linear relation v=ωrv = \omega r gives tangential speed, whereas centripetal acceleration is ac=v2r=ω2ra_c = \frac{v^2}{r} = \omega^2 r.

  2. Step 2

    T=2πω=2π3600≈0.00175 sT = \frac{2\pi}{\omega} = \frac{2\pi}{3600} \approx 0.00175\text{ s}

    Correct

    T=2πω=2π60 rad/s=π30 s≈0.105 sT = \frac{2\pi}{\omega} = \frac{2\pi}{60\text{ rad/s}} = \frac{\pi}{30}\text{ s} \approx 0.105\text{ s}

    You correctly identified the formula connecting rotational period to angular speed, T=2πωT = \frac{2\pi}{\omega}. However, substituting the incorrect angular speed from Step 1 caused the final period to be off by a factor of 60.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the need to find the angular velocity ω\omega in order to determine the rotational period TT.

You used the correct relationship between period and angular velocity, T=2πωT = \frac{2\pi}{\omega}.

You evaluated the arithmetic for your chosen equations accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Confusion: Linear Speed vs. Centripetal Acceleration

You omitted the square on angular velocity, confusing ac=ω2ra_c = \omega^2 r with tangential speed v=ωrv = \omega r.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing linear velocity v=ωrv = \omega r (units of m/s\text{m/s}) with centripetal acceleration ac=ω2ra_c = \omega^2 r (units of m/s2\text{m/s}^2), likely due to overlooking the dimensional difference between velocity and acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Centripetal Acceleration Form
  • ac=v2r=ω2ra_c = \frac{v^2}{r} = \omega^2 r

  • Always verify that angular speed is squared when calculating centripetal acceleration.

Dimensional / Unit Check
  • [ωr]=(rad/s)(m)=m/s≠m/s2[\omega r] = (\text{rad/s})(\text{m}) = \text{m/s} \neq \text{m/s}^2

  • Check the units: ωr\omega r has units of speed (m/s\text{m/s}), while ω2r\omega^2 r has units of acceleration (m/s2\text{m/s}^2).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the correct centripetal acceleration formula: ac=ω2ra_c = \omega^2 r.

  2. Solve for ω\omega: ω=acr=540 m/s20.150 m=3600 rad2/s2=60 rad/s\omega = \sqrt{\frac{a_c}{r}} = \sqrt{\frac{540\text{ m/s}^2}{0.150\text{ m}}} = \sqrt{3600\text{ rad}^2/\text{s}^2} = 60\text{ rad/s}.

  3. Substitute ω=60 rad/s\omega = 60\text{ rad/s} into the period formula: T=2πω=2π60 rad/s=π30 s≈0.105 sT = \frac{2\pi}{\omega} = \frac{2\pi}{60\text{ rad/s}} = \frac{\pi}{30}\text{ s} \approx 0.105\text{ s}.

Final answer

T≈0.105 sT \approx 0.105\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between tangential velocity v=ωrv = \omega r and centripetal acceleration ac=ω2ra_c = \omega^2 r.

  • Perform a quick dimensional analysis whenever recalling rotational kinematic formulas.

  • Practice deriving ac=4π2rT2a_c = \frac{4\pi^2 r}{T^2} directly by combining ac=ω2ra_c = \omega^2 r and ω=2πT\omega = \frac{2\pi}{T}.

OverviewACEpath Teacher's Diagnosis

03 The student confuses rotational period with rotational frequency or omits the factor of 2π, writing T = 1/ω instead of T = 2π/ω.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ac=ω2r  ⟹  ω2=5400.150=3600  ⟹  ω=60 rad/sa_c = \omega^2 r \implies \omega^2 = \frac{540}{0.150} = 3600 \implies \omega = 60\text{ rad/s}

  2. Step 2

    T=1ω=160 s≈0.0167 sT = \frac{1}{\omega} = \frac{1}{60}\text{ s} \approx 0.0167\text{ s}

    Correct

    T=2πω=2π60 s=π30 s≈0.105 sT = \frac{2\pi}{\omega} = \frac{2\pi}{60}\text{ s} = \frac{\pi}{30}\text{ s} \approx 0.105\text{ s}

    You used T=1ωT = \frac{1}{\omega}, which confuses ordinary rotational frequency ff with angular frequency ω\omega. One full rotation covers 2π radians2\pi\text{ radians}, so the period is T=2πωT = \frac{2\pi}{\omega}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the relationship ac=ω2ra_c = \omega^2 r connecting centripetal acceleration, angular speed, and orbital radius.

You solved accurately for the numerical angular speed ω=60 rad/s\omega = 60\text{ rad/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of $2\pi$ in period formula

You treated ω\omega as ordinary frequency ff in the reciprocal relation T=1/fT = 1/f.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating rotational frequency ff (measured in revolutions per second or Hz\text{Hz}) with angular speed ω\omega (measured in radians per second). Because each revolution corresponds to an angular displacement of 2π rad2\pi\text{ rad}, the conversion between them requires ω=2πf=2πT\omega = 2\pi f = \frac{2\pi}{T}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Angular Speed vs. Frequency
  • ω=2πf=2πT\omega = 2\pi f = \frac{2\pi}{T}, where f=1Tf = \frac{1}{T}.

  • Whenever working with ω\omega in radians per second, remember that one complete cycle requires 2π radians2\pi\text{ radians}, giving T=2πωT = \frac{2\pi}{\omega} rather than 1ω\frac{1}{\omega}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the correct relation between rotational period and angular velocity: T=2πωT = \frac{2\pi}{\omega}.

  2. Substitute ω=60 rad/s\omega = 60\text{ rad/s}: T=2π60 s=π30 sT = \frac{2\pi}{60}\text{ s} = \frac{\pi}{30}\text{ s}.

  3. Evaluate the numerical value: T≈0.105 sT \approx 0.105\text{ s}.

Final answer

T=0.105 sT = 0.105\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the dimensional distinction between frequency in rev/s\text{rev/s} (cycles per second) and angular speed in rad/s\text{rad/s}.

  • Practice converting between TT, ff, and ω\omega across rotational dynamics problems to reinforce the factor of 2π2\pi.

Lock it in

Similar question

01

A small bead on a rotating disk is located r=0.20 mr = 0.20\text{ m} from the center and experiences a centripetal acceleration of ac=180 m/s2a_c = 180\text{ m/s}^2. Find its angular speed ω\omega and its rotational period TT.

Answer

ω=acr=1800.20=900=30 rad/s\omega = \sqrt{\frac{a_c}{r}} = \sqrt{\frac{180}{0.20}} = \sqrt{900} = 30\text{ rad/s}. Then T=2πω=2π30=π15 s≈0.209 sT = \frac{2\pi}{\omega} = \frac{2\pi}{30} = \frac{\pi}{15}\text{ s} \approx 0.209\text{ s}.

02

An astronaut trains in a human centrifuge with an arm of length r=8.0 mr = 8.0\text{ m}. If the centripetal acceleration reaches ac=78.4 m/s2a_c = 78.4\text{ m/s}^2 (8g8g), determine the rotational frequency ff in revolutions per second.

Answer

ω=acr=78.48.0=9.8≈3.13 rad/s\omega = \sqrt{\frac{a_c}{r}} = \sqrt{\frac{78.4}{8.0}} = \sqrt{9.8} \approx 3.13\text{ rad/s}. Since ω=2πf\omega = 2\pi f, f=ω2π=3.132π≈0.498 rev/sf = \frac{\omega}{2\pi} = \frac{3.13}{2\pi} \approx 0.498\text{ rev/s} (or Hz\text{Hz}).

03

A centrifuge's rotational speed is doubled while the test tube remains at the same radial distance rr. By what factor does its centripetal acceleration aca_c change, and by what factor does its period TT change?

Answer

Since ac=ω2ra_c = \omega^2 r, doubling ω\omega increases aca_c by a factor of 22=42^2 = 4. Since T=2πωT = \frac{2\pi}{\omega}, doubling ω\omega halves the period (TT decreases by a factor of 22, or is multiplied by 12\frac{1}{2}).

Loading workspace…