Resources

A scientific satellite of mass m=850 kgm = 850\text{ kg} is in a stable circular orbit around a spherical asteroid of mass M=4.50×1020 kgM = 4.50 \times 10^{20}\text{ kg} and radius RA=2.40×105 mR_A = 2.40 \times 10^5\text{ m}. By equating Newton's law of universal gravitation with the necessary centripetal force (Fg=FcF_g = F_c), determine the orbital period TT of the satellite if its orbital altitude above the asteroid's surface is h=6.00×104 mh = 6.00 \times 10^4\text{ m}. Take G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2.

Answer and steps

Final answer

T=5.96×103 sT = 5.96 \times 10^3\text{ s}

Steps

01

Determine the Orbital Radius

The gravitational force acts from the center of mass of the asteroid. Therefore, the satellite's orbital radius rr is the sum of the asteroid's radius RAR_A and the satellite's altitude hh:

r=RA+hr = R_A + h

r=2.40×105 m+6.00×104 m=3.00×105 mr = 2.40 \times 10^5\text{ m} + 6.00 \times 10^4\text{ m} = 3.00 \times 10^5\text{ m}

Common Pitfall: Using only the altitude hh as the orbital distance leads to an incorrect radius. Newton's law of universal gravitation requires the distance measured from the center of the celestial body.


02

Equate Gravitational Force to Centripetal Force

For a stable circular orbit, gravity provides the necessary centripetal force:

Fg=FcF_g = F_c

Using Newton's law of universal gravitation and the centripetal force expressed in terms of orbital speed vv:

GMmr2=mv2r\frac{G M m}{r^2} = \frac{m v^2}{r}

Dividing both sides by the satellite mass mm (showing that orbital motion is independent of the satellite's mass) and multiplying by rr:

v2=GMrv^2 = \frac{G M}{r}


03

Express Orbital Speed in Terms of Orbital Period

For a complete circular orbit of circumference 2πr2\pi r, the satellite travels this distance in one period TT:

v=2πrTv = \frac{2\pi r}{T}

Substitute this expression for vv into the orbital equation:

(2πrT)2=GMr\left(\frac{2\pi r}{T}\right)^2 = \frac{G M}{r}

4π2r2T2=GMr\frac{4\pi^2 r^2}{T^2} = \frac{G M}{r}

Rearranging for the orbital period TT:

T2=4π2r3GM  ⟹  T=2πr3GMT^2 = \frac{4\pi^2 r^3}{G M} \implies T = 2\pi \sqrt{\frac{r^3}{G M}}


04

Calculate the Numerical Value

Substitute the known values into the equation:

  • r=3.00×105 mr = 3.00 \times 10^5\text{ m}
  • M=4.50×1020 kgM = 4.50 \times 10^{20}\text{ kg}
  • G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2

First, compute the numerator and denominator inside the square root:

r3=(3.00×105 m)3=2.70×1016 m3r^3 = (3.00 \times 10^5\text{ m})^3 = 2.70 \times 10^{16}\text{ m}^3

GM=(6.674×10−11 N⋅m2/kg2)(4.50×1020 kg)=3.0033×1010 m3/s2G M = (6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(4.50 \times 10^{20}\text{ kg}) = 3.0033 \times 10^{10}\text{ m}^3/\text{s}^2

Now evaluate the ratio and calculate TT:

r3GM=2.70×10163.0033×1010≈8.9901×105 s2\frac{r^3}{G M} = \frac{2.70 \times 10^{16}}{3.0033 \times 10^{10}} \approx 8.9901 \times 10^5\text{ s}^2

T=2π8.9901×105 s2≈2π(948.16 s)≈5.96×103 sT = 2\pi \sqrt{8.9901 \times 10^5\text{ s}^2} \approx 2\pi (948.16\text{ s}) \approx 5.96 \times 10^3\text{ s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the altitude above the surface as the orbital radius instead of adding the asteroid's radius.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    GMmr2=mv2r  ⟹  v=2πrT  ⟹  T=2πr3GM\frac{GMm}{r^2} = \frac{mv^2}{r} \implies v = \frac{2\pi r}{T} \implies T = 2\pi\sqrt{\frac{r^3}{GM}}

  2. Step 2

    r=6.00×104 mr = 6.00 \times 10^4\text{ m}

    Correct

    r=RA+h=2.40×105 m+6.00×104 m=3.00×105 mr = R_A + h = 2.40 \times 10^5\text{ m} + 6.00 \times 10^4\text{ m} = 3.00 \times 10^5\text{ m}

    You set the orbital radius equal to the altitude hh. In orbital mechanics and universal gravitation, the radius rr must be measured from the center of mass of the celestial body, which requires adding the asteroid's radius: r=RA+hr = R_A + h.

  3. Step 3

    T=2π(6.00×104)36.674×10−11×4.50×1020  ⟹  T=533 sT = 2\pi\sqrt{\frac{(6.00 \times 10^4)^3}{6.674 \times 10^{-11} \times 4.50 \times 10^{20}}} \implies T = 533\text{ s}

    Correct

    T=2π(3.00×105)36.674×10−11×4.50×1020≈5.96×103 sT = 2\pi\sqrt{\frac{(3.00 \times 10^5)^3}{6.674 \times 10^{-11} \times 4.50 \times 10^{20}}} \approx 5.96 \times 10^3\text{ s}

    Your numerical evaluation was mathematically consistent with your radius value, but using the incorrect radius led to an incorrect orbital period.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated gravitational force to centripetal force to start the derivation.

You related linear orbital speed to orbital circumference and period accurately.

You carried out the algebraic substitution and square root calculation correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Radius vs. Altitude Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the satellite's altitude above the asteroid's surface as the total orbital distance, forgetting that Newton's law of universal gravitation requires the distance between the centers of mass of the two bodies (r=R+hr = R + h).

REASONING PATH
Your ACEpath teacher’s suggested approach
Center-to-Center Distance
  • Newton's law of gravitation treats spherically symmetric bodies as point masses located at their centers: r=R+hr = R + h.

  • Always draw a quick diagram and check whether the given distance is an altitude from the surface or a distance from the center.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the total orbital radius from the center of the asteroid: r=RA+h=2.40×105 m+6.00×104 m=3.00×105 mr = R_A + h = 2.40 \times 10^5\text{ m} + 6.00 \times 10^4\text{ m} = 3.00 \times 10^5\text{ m}.

  2. Substitute r=3.00×105 mr = 3.00 \times 10^5\text{ m} into your period equation: T=2π(3.00×105 m)3(6.674×10−11 N⋅m2/kg2)(4.50×1020 kg)T = 2\pi\sqrt{\frac{(3.00 \times 10^5\text{ m})^3}{(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(4.50 \times 10^{20}\text{ kg})}}.

  3. Evaluate the quantity under the radical: 2.70×10163.0033×1010≈8.9901×105 s2\frac{2.70 \times 10^{16}}{3.0033 \times 10^{10}} \approx 8.9901 \times 10^5\text{ s}^2.

  4. Take the square root and multiply by 2π2\pi: T=2π×948.16 s≈5.96×103 sT = 2\pi \times 948.16\text{ s} \approx 5.96 \times 10^3\text{ s}.

Final answer

T=5.96×103 sT = 5.96 \times 10^3\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between orbital radius rr, body radius RR, and altitude hh.

  • Practice labeling radial distances on orbital orbit sketches before substituting numerical values.

OverviewACEpath Teacher's Diagnosis

02 The student uses the asteroid's radius instead of the total orbital radius, neglecting the satellite's altitude above the surface.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r=2.40×105 mr = 2.40 \times 10^5\text{ m}

    Correct

    r=RA+h=2.40×105 m+6.00×104 m=3.00×105 mr = R_A + h = 2.40 \times 10^5\text{ m} + 6.00 \times 10^4\text{ m} = 3.00 \times 10^5\text{ m}

    You took the asteroid's radius RAR_A as the orbital radius rr, omitting the satellite's altitude h=6.00×104 mh = 6.00 \times 10^4\text{ m} above the surface.

  2. Step 2

    Fg=Fc  ⟹  GMmr2=m(4π2rT2)  ⟹  T2=4π2r3GMF_g = F_c \implies \frac{G M m}{r^2} = m\left(\frac{4\pi^2 r}{T^2}\right) \implies T^2 = \frac{4\pi^2 r^3}{G M}

  3. Step 3

    T=2π(2.40×105)36.674×10−11×4.50×1020T = 2\pi \sqrt{\frac{(2.40 \times 10^5)^3}{6.674 \times 10^{-11} \times 4.50 \times 10^{20}}}

    Correct

    T=2π(3.00×105 m)3(6.674×10−11 N⋅m2/kg2)(4.50×1020 kg)T = 2\pi \sqrt{\frac{(3.00 \times 10^5\text{ m})^3}{(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(4.50 \times 10^{20}\text{ kg})}}

    Your substitution is algebraically sound, but it carries forward the incorrect orbital radius from Step 1.

  4. Step 4

    T=4.26×103 sT = 4.26 \times 10^3\text{ s}

    Correct

    T≈5.96×103 sT \approx 5.96 \times 10^3\text{ s}

    Your numerical evaluation matches your substituted numbers, but the resulting value is incorrect due to the initial radius error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated the gravitational force to the centripetal force.

You expressed centripetal acceleration in terms of orbital period TT without error.

You isolated TT algebraically and evaluated your numerical expression accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Radius vs. Altitude Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the asteroid's surface radius as the orbital radius, forgetting that gravity acts from the center of mass and that the orbital radius must include the altitude above the surface (r=R+hr = R + h).

REASONING PATH
Your ACEpath teacher’s suggested approach
Measure from Center of Mass
  • In Newton's law of universal gravitation, the distance rr is measured from the center of mass of the central body to the satellite: r=R+hr = R + h.

  • Always draw a quick radial diagram showing the body's radius RR and the orbit altitude hh, then write r=R+hr = R + h before substituting.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. r=2.40×105 m+6.00×104 m=3.00×105 mr = 2.40 \times 10^5\text{ m} + 6.00 \times 10^4\text{ m} = 3.00 \times 10^5\text{ m}

  2. T=2π(3.00×105)3(6.674×10−11)(4.50×1020)T = 2\pi \sqrt{\frac{(3.00 \times 10^5)^3}{(6.674 \times 10^{-11})(4.50 \times 10^{20})}}

  3. T=2π2.70×10163.0033×1010=2π8.9901×105≈5.96×103 sT = 2\pi \sqrt{\frac{2.70 \times 10^{16}}{3.0033 \times 10^{10}}} = 2\pi \sqrt{8.9901 \times 10^5} \approx 5.96 \times 10^3\text{ s}

Final answer

T=5.96×103 sT = 5.96 \times 10^3\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down r=RA+hr = R_A + h explicitly as your first line whenever an altitude above the surface is given.

  • Double-check whether problem statements specify 'distance from center' or 'altitude above the surface' before beginning calculations.

OverviewACEpath Teacher's Diagnosis

03 The student includes the satellite's mass in the denominator instead of the central body's mass when solving for period.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    r=2.40×105 m+6.00×104 m=3.00×105 mr = 2.40 \times 10^5\text{ m} + 6.00 \times 10^4\text{ m} = 3.00 \times 10^5\text{ m}

  2. Step 2

    GMmr2=mv2r  ⟹  v2=GMr  ⟹  T=2πr3GM\frac{G M m}{r^2} = \frac{m v^2}{r} \implies v^2 = \frac{G M}{r} \implies T = 2\pi \sqrt{\frac{r^3}{G M}}

  3. Step 3

    T=2π(3.00×105)36.674×10−11×850T = 2\pi \sqrt{\frac{(3.00 \times 10^5)^3}{6.674 \times 10^{-11} \times 850}}

    Correct

    T=2π(3.00×105)36.674×10−11×(4.50×1020)T = 2\pi \sqrt{\frac{(3.00 \times 10^5)^3}{6.674 \times 10^{-11} \times (4.50 \times 10^{20})}}

    You substituted the satellite's mass (m=850 kgm = 850\text{ kg}) into the denominator instead of the central body's mass (M=4.50×1020 kgM = 4.50 \times 10^{20}\text{ kg}).

  4. Step 4

    T=4.33×1012 sT = 4.33 \times 10^{12}\text{ s}

    Correct

    T≈5.96×103 sT \approx 5.96 \times 10^3\text{ s}

    Your final arithmetic followed your substituted values, but the numerical answer is incorrect due to the wrong mass used in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the orbital radius by measuring from the asteroid's center.

You set up the force balance between universal gravitation and centripetal force accurately.

You correctly simplified the equations to obtain the formula for orbital period TT.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Central Mass vs. Orbiting Mass Confusion

You substituted the orbiting satellite's mass m=850 kgm = 850\text{ kg} into the period formula where the central body's mass M=4.50×1020 kgM = 4.50 \times 10^{20}\text{ kg} belongs.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In orbital mechanics, the mass of the orbiting body cancels out when equating gravitational force to centripetal force ( rac{GMm}{r^2} = rac{mv^2}{r}). The remaining mass MM in the denominator of Kepler's third law must always be the mass of the central, attracting body.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Which Mass Cancels
  • GMcentralmorbitr2=morbitv2r  ⟹  v2=GMcentralr\frac{G M_\text{central} m_\text{orbit}}{r^2} = \frac{m_\text{orbit} v^2}{r} \implies v^2 = \frac{G M_\text{central}}{r}

  • Check your cancellation step to verify that the orbiting body's mass mm is eliminated and only the central body's mass McentralM_\text{central} governs the orbit.

Reality Check on Orbital Period
  • Orbital periods around small asteroids at close altitudes are typically on the order of hours or thousands of seconds, not billions of years.

  • Inspect the order of magnitude of TT; a value of 1012 s10^{12}\text{ s} (over 30,00030{,}000 years) signals an unphysically tiny central mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute r=3.00×105 mr = 3.00 \times 10^5\text{ m}, G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2, and the asteroid mass M=4.50×1020 kgM = 4.50 \times 10^{20}\text{ kg}.

  2. Compute the quantity under the radical: r3GM=(3.00×105)3(6.674×10−11)(4.50×1020)=2.70×10163.0033×1010≈8.9901×105 s2\frac{r^3}{GM} = \frac{(3.00 \times 10^5)^3}{(6.674 \times 10^{-11})(4.50 \times 10^{20})} = \frac{2.70 \times 10^{16}}{3.0033 \times 10^{10}} \approx 8.9901 \times 10^5\text{ s}^2.

  3. Evaluate the square root and multiply by 2π2\pi: T=2π8.9901×105 s2≈2π(948.16 s)≈5.96×103 sT = 2\pi \sqrt{8.9901 \times 10^5\text{ s}^2} \approx 2\pi (948.16\text{ s}) \approx 5.96 \times 10^3\text{ s}.

Final answer

T=5.96×103 sT = 5.96 \times 10^3\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Label masses explicitly with subscripts such as MasteroidM_\text{asteroid} and msatm_\text{sat} when listing knowns to avoid mixing them up.

  • Review how Kepler's third law depends exclusively on the central body's mass.

  • Work through follow-up exercises calculating orbital period around different celestial bodies.

Lock it in

Similar question

01

A space station orbits a planet of mass M=2.00×1024 kgM = 2.00 \times 10^{24}\text{ kg} and radius Rp=5.00×106 mR_p = 5.00 \times 10^6\text{ m} at an altitude of h=1.00×106 mh = 1.00 \times 10^6\text{ m}. Calculate its orbital speed vv. (Use G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)

Answer

v=4.72×103 m/sv = 4.72 \times 10^3\text{ m/s}. First, compute the center-to-center radius r=Rp+h=5.00×106 m+1.00×106 m=6.00×106 mr = R_p + h = 5.00 \times 10^6\text{ m} + 1.00 \times 10^6\text{ m} = 6.00 \times 10^6\text{ m}. Then use v=GMr=(6.674×10−11)(2.00×1024)6.00×106≈4.72×103 m/sv = \sqrt{\frac{GM}{r}} = \sqrt{\frac{(6.674 \times 10^{-11})(2.00 \times 10^{24})}{6.00 \times 10^6}} \approx 4.72 \times 10^3\text{ m/s}.

02

A satellite orbits a spherical dwarf planet at an altitude equal to twice the planet's radius (h=2Rh = 2R). By what factor does the orbital period TT change if the satellite is moved to an altitude equal to five times the planet's radius (h′=5Rh' = 5R)?

Answer

The period increases by a factor of 22≈2.832\sqrt{2} \approx 2.83. Initial orbital radius is r1=R+2R=3Rr_1 = R + 2R = 3R, and the new radius is r2=R+5R=6Rr_2 = R + 5R = 6R. By Kepler's third law, T∝r3/2T \propto r^{3/2}, so T2T1=(6R3R)3/2=23/2=22≈2.83\frac{T_2}{T_1} = \left(\frac{6R}{3R}\right)^{3/2} = 2^{3/2} = 2\sqrt{2} \approx 2.83.

03

A probe orbits a moon of radius R=1.20×106 mR = 1.20 \times 10^6\text{ m} and mass M=8.00×1021 kgM = 8.00 \times 10^{21}\text{ kg} with an orbital period of T=1.50×104 sT = 1.50 \times 10^4\text{ s}. Determine the probe's altitude hh above the moon's surface. (Use G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)

Answer

h=3.63×105 mh = 3.63 \times 10^5\text{ m}. Rearranging Kepler's third law gives r=(GMT24π2)1/3=((6.674×10−11)(8.00×1021)(1.50×104)24π2)1/3≈1.563×106 mr = \left(\frac{GMT^2}{4\pi^2}\right)^{1/3} = \left(\frac{(6.674 \times 10^{-11})(8.00 \times 10^{21})(1.50 \times 10^4)^2}{4\pi^2}\right)^{1/3} \approx 1.563 \times 10^6\text{ m}. Subtracting the radius gives the altitude h=r−R=1.563×106 m−1.20×106 m=3.63×105 mh = r - R = 1.563 \times 10^6\text{ m} - 1.20 \times 10^6\text{ m} = 3.63 \times 10^5\text{ m}.

Loading workspace…