Resources

A 0.500 kg0.500\text{ kg} object oscillates horizontally on a frictionless surface connected to a spring with k=200 N/mk = 200\text{ N/m}. The mechanical apparatus has a structural limit: the instantaneous kinetic energy KK of the oscillating mass must not drop below 36.0%36.0\% of the total mechanical energy EE during monitored intervals. Determine the critical displacement boundary ∣xc∣|x_c| beyond which the kinetic energy falls below this 36.0%36.0\% threshold if the total amplitude of oscillation is A=0.250 mA = 0.250\text{ m}.

Answer and steps

Final answer

Critical displacement boundary ∣xc∣=0.200 m|x_c| = 0.200\text{ m}.

Steps

01

Understand Energy Conservation in Simple Harmonic Motion

For an object undergoing simple harmonic motion on a frictionless horizontal surface, total mechanical energy EE is conserved. It is the sum of instantaneous kinetic energy KK and elastic potential energy UU:

E=K+UE = K + U

The total energy is determined by the maximum potential energy at the turning points (x=±Ax = \pm A):

E=12kA2E = \frac{1}{2}kA^2

Similarly, the potential energy at any displacement xx is:

U=12kx2U = \frac{1}{2}kx^2


02

Relate the Kinetic Energy Condition to Potential Energy

The problem specifies that the kinetic energy must not fall below 36.0%36.0\% of the total energy:

K≥0.360EK \ge 0.360E

At the critical boundary ∣xc∣|x_c|, the kinetic energy reaches this lower limit:

K=0.360EK = 0.360E

Using the conservation of energy equation U=E−KU = E - K:

U=E−0.360E=0.640EU = E - 0.360E = 0.640E


03

Solve for the Critical Displacement Boundary ∣xc∣|x_c|

Substitute the expressions for UU and EE in terms of displacement and amplitude:

12kxc2=0.640(12kA2)\frac{1}{2}kx_c^2 = 0.640\left(\frac{1}{2}kA^2\right)

Cancel the common factor 12k\frac{1}{2}k on both sides:

xc2=0.640A2x_c^2 = 0.640A^2

Taking the square root gives:

∣xc∣=0.640 A=0.800 A|x_c| = \sqrt{0.640}\,A = 0.800\,A

Common Pitfall: Although the mass m=0.500 kgm = 0.500\text{ kg} and spring constant k=200 N/mk = 200\text{ N/m} are provided, calculating the numerical value of EE in joules first is unnecessary and can introduce rounding errors. Working directly with energy fractions provides an exact and straightforward solution.


04

Calculate the Numerical Value

Given an amplitude of A=0.250 mA = 0.250\text{ m}:

∣xc∣=0.800⋅0.250 m=0.200 m|x_c| = 0.800 \cdot 0.250\text{ m} = 0.200\text{ m}

When ∣x∣>0.200 m|x| > 0.200\text{ m}, the potential energy exceeds 64.0%64.0\% of EE, causing the kinetic energy to drop below the required 36.0%36.0\% threshold. Thus, the critical displacement boundary is ∣xc∣=0.200 m|x_c| = 0.200\text{ m}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses kinetic energy with potential energy at the boundary, setting potential energy directly to 36.0% of total energy instead of subtracting from 100%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    E=12kA2E = \frac{1}{2}kA^2

  2. Step 2

    U=12kx2=0.360EU = \frac{1}{2}kx^2 = 0.360E

    Correct

    U=E−K=E−0.360E=0.640EU = E - K = E - 0.360E = 0.640E

    The condition states that kinetic energy KK is 36.0%36.0\% of EE. Because total mechanical energy is conserved (E=K+UE = K + U), the elastic potential energy at this critical boundary is U=(1−0.360)E=0.640EU = (1 - 0.360)E = 0.640E, not 0.360E0.360E.

  3. Step 3

    12kxc2=0.360⋅12kA2  ⟹  xc2=0.360A2\frac{1}{2}kx_c^2 = 0.360 \cdot \frac{1}{2}kA^2 \implies x_c^2 = 0.360A^2

    Correct

    12kxc2=0.640⋅12kA2  ⟹  xc2=0.640A2\frac{1}{2}kx_c^2 = 0.640 \cdot \frac{1}{2}kA^2 \implies x_c^2 = 0.640A^2

    Your algebraic step of canceling 12k\frac{1}{2}k from both sides is mathematically sound, but it carries forward the incorrect energy fraction from the previous step.

  4. Step 4

    ∣xc∣=0.360⋅0.250 m=0.600⋅0.250 m=0.150 m|x_c| = \sqrt{0.360} \cdot 0.250\text{ m} = 0.600 \cdot 0.250\text{ m} = 0.150\text{ m}

    Correct

    ∣xc∣=0.640⋅0.250 m=0.800⋅0.250 m=0.200 m|x_c| = \sqrt{0.640} \cdot 0.250\text{ m} = 0.800 \cdot 0.250\text{ m} = 0.200\text{ m}

    You evaluated the square root and arithmetic correctly, but the result is affected by starting from 0.3600.360 rather than 0.6400.640.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that total mechanical energy in simple harmonic motion is given by E=12kA2E = \frac{1}{2}kA^2.

You related displacement directly to amplitude using energy proportions rather than calculating intermediate numerical values in joules.

You executed the square root and arithmetic steps without calculation errors.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Energy Partition Misattribution

You assigned the given 36.0%36.0\% threshold to potential energy UU rather than subtracting it from the total energy to find U=0.640EU = 0.640E.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing kinetic and potential energy partitions in simple harmonic motion. Because displacement relates directly to potential energy (U=12kx2U = \frac{1}{2}kx^2), any condition specified for kinetic energy KK must first be converted into potential energy via U=E−KU = E - K.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert Kinetic Conditions to Potential Energy
  • E=K+U  ⟹  U=E−KE = K + U \implies U = E - K

  • Whenever a problem specifies a condition on kinetic energy in simple harmonic motion, immediately write down U=E−KU = E - K before substituting xx.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the potential energy fraction at the boundary: U=E−K=E−0.360E=0.640EU = E - K = E - 0.360E = 0.640E.

  2. Substitute U=12kxc2U = \frac{1}{2}kx_c^2 and E=12kA2E = \frac{1}{2}kA^2: 12kxc2=0.640(12kA2)  ⟹  xc2=0.640A2\frac{1}{2}kx_c^2 = 0.640\left(\frac{1}{2}kA^2\right) \implies x_c^2 = 0.640A^2.

  3. Take the square root: ∣xc∣=0.640 A=0.800⋅0.250 m=0.200 m|x_c| = \sqrt{0.640}\,A = 0.800 \cdot 0.250\text{ m} = 0.200\text{ m}.

Final answer

∣xc∣=0.200 m|x_c| = 0.200\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how energy partitions vary with displacement between x=0x = 0 (all kinetic) and x=±Ax = \pm A (all potential).

  • Practice converting kinetic energy thresholds to potential energy fractions before solving for position.

OverviewACEpath Teacher's Diagnosis

02 The student forgets that mechanical energy is proportional to the square of displacement and treats displacement as directly proportional to energy, calculating 64.0% of the amplitude instead of taking the square root.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    K=0.360E  ⟹  U=E−K=0.640EK = 0.360E \implies U = E - K = 0.640E

  2. Step 2

    ∣xc∣=0.640∗A|x_c| = 0.640 * A

    Correct

    12kxc2=0.640(12kA2)  ⟹  ∣xc∣=0.640 A=0.800A\frac{1}{2}kx_c^2 = 0.640\left(\frac{1}{2}kA^2\right) \implies |x_c| = \sqrt{0.640}\,A = 0.800A

    You treated displacement as directly proportional to potential energy. Because elastic potential energy depends on the square of displacement (U=12kx2U = \frac{1}{2}kx^2), the ratio of displacements is related by xc2A2=UE\frac{x_c^2}{A^2} = \frac{U}{E}, which requires taking a square root.

  3. Step 3

    ∣xc∣=0.640∗0.250 m=0.160 m|x_c| = 0.640 * 0.250\text{ m} = 0.160\text{ m}

    Correct

    ∣xc∣=0.800⋅0.250 m=0.200 m|x_c| = 0.800 \cdot 0.250\text{ m} = 0.200\text{ m}

    Your arithmetic in this step followed your formula, but the resulting numerical value was thrown off by missing the square root in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that total energy is conserved throughout the oscillation.

You subtracted the kinetic energy threshold from total energy to find the corresponding potential energy fraction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear Scaling of Quadratic Quantity

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed displacement scales linearly with potential energy (x∝Ux \propto U) rather than quadratically (U∝x2U \propto x^2, so x∝Ux \propto \sqrt{U}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadratic Energy-Displacement Relationship
  • In simple harmonic motion, elastic potential energy is U=12kx2U = \frac{1}{2}kx^2 and total energy is E=12kA2E = \frac{1}{2}kA^2, so UE=(xA)2\frac{U}{E} = \left(\frac{x}{A}\right)^2.

  • Always take the square root of the energy fraction when solving for position: ∣x∣=AUE|x| = A\sqrt{\frac{U}{E}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Relate potential energy directly to displacement: 12kxc2=0.640(12kA2)\frac{1}{2}kx_c^2 = 0.640\left(\frac{1}{2}kA^2\right)

  2. Divide by 12k\frac{1}{2}k to isolate displacement: xc2=0.640A2x_c^2 = 0.640 A^2

  3. Take the square root of both sides: ∣xc∣=0.640 A=0.800A|x_c| = \sqrt{0.640}\,A = 0.800A

  4. Substitute A=0.250 mA = 0.250\text{ m}: ∣xc∣=0.800×0.250 m=0.200 m|x_c| = 0.800 \times 0.250\text{ m} = 0.200\text{ m}

Final answer

Critical displacement boundary ∣xc∣=0.200 m|x_c| = 0.200\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the quadratic dependence of spring potential energy on displacement (U=12kx2U = \frac{1}{2}kx^2).

  • Whenever you find the fraction of total energy stored as potential energy, remember to take the square root to find the corresponding fraction of amplitude.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the fractional kinetic energy correctly but forgets to take the square root of the energy fraction when solving for displacement from x² = 0.640 A².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    K=E−U=0.360E  ⟹  U=0.640EK = E - U = 0.360E \implies U = 0.640E

  2. Step 2

    xc2A2=0.640\frac{x_c^2}{A^2} = 0.640

  3. Step 3

    ∣xc∣=0.640∗A2=0.640∗(0.250 m)2=0.040 m|x_c| = 0.640 * A^2 = 0.640 * (0.250\text{ m})^2 = 0.040\text{ m}

    Correct

    ∣xc∣=0.640 A=0.800×0.250 m=0.200 m|x_c| = \sqrt{0.640}\,A = 0.800 \times 0.250\text{ m} = 0.200\text{ m}

    From xc2=0.640A2x_c^2 = 0.640A^2, solving for ∣xc∣|x_c| requires taking the square root of both sides: ∣xc∣=0.640 A|x_c| = \sqrt{0.640}\,A. Multiplying 0.6400.640 by A2A^2 directly gives xc2x_c^2, not ∣xc∣|x_c|, and creates a dimensional inconsistency.

WHAT YOU DID WELL
Compliments from Your Teacher

You used total mechanical energy conservation to relate kinetic and potential energies.

You correctly calculated that the potential energy fraction at the boundary is 0.640E0.640E.

You set up the proportional relationship between potential energy and displacement squared accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root when solving quadratic relation

You cleared the denominator to get xc2=0.640A2x_c^2 = 0.640 A^2, but labeled the result directly as ∣xc∣|x_c| without taking the square root.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated xc2x_c^2 with ∣xc∣|x_c| during algebraic isolation, overlooking that potential energy scales with the square of position, requiring a square root operation to recover linear position.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency Check
  • Displacement has units of meters (m\text{m}), whereas A2A^2 has units of m2\text{m}^2.

  • Always verify that both sides of your isolated variable equation have matching physical units before calculating numerical values.

Isolating Squared Quantities
  • If x2A2=c\frac{x^2}{A^2} = c, then ∣x∣=c A|x| = \sqrt{c}\,A.

  • Take the square root of both the numeric fraction and the amplitude term simultaneously.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply both sides by A2A^2: xc2=0.640A2x_c^2 = 0.640 A^2.

  2. Take the square root of both sides: ∣xc∣=0.640 A=0.800A|x_c| = \sqrt{0.640}\,A = 0.800A.

  3. Substitute the given amplitude A=0.250 mA = 0.250\text{ m}: ∣xc∣=0.800×0.250 m=0.200 m|x_c| = 0.800 \times 0.250\text{ m} = 0.200\text{ m}.

Final answer

Critical displacement boundary ∣xc∣=0.200 m|x_c| = 0.200\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a quick dimensional analysis whenever solving for a spatial coordinate from an energy equation.

  • Practice converting fractional potential energy into fractional displacement using ∣x∣=UE A|x| = \sqrt{\frac{U}{E}}\,A.

Lock it in

Similar question

01

A mass-spring system oscillates with an amplitude of A=0.400 mA = 0.400\text{ m}. Find the displacement magnitude ∣x∣|x| at which the instantaneous kinetic energy is exactly 19.0%19.0\% of the total mechanical energy.

Answer

∣x∣=0.360 m|x| = 0.360\text{ m}. Using U=E−KU = E - K, we have U=(1−0.190)E=0.810EU = (1 - 0.190)E = 0.810E. Setting 12kx2=0.810(12kA2)\frac{1}{2}kx^2 = 0.810\left(\frac{1}{2}kA^2\right) yields x2=0.810A2x^2 = 0.810A^2, so ∣x∣=0.810 A=0.900⋅0.400 m=0.360 m|x| = \sqrt{0.810}\,A = 0.900 \cdot 0.400\text{ m} = 0.360\text{ m}.

02

A block on a horizontal spring oscillates between x=−Ax = -A and x=+Ax = +A. Over what range of displacement ∣x∣|x| does the kinetic energy account for at least 50.0%50.0\% of the total mechanical energy? Express your answer in terms of AA.

Answer

∣x∣≤22A≈0.707A|x| \le \frac{\sqrt{2}}{2}A \approx 0.707A. For K≥0.500EK \ge 0.500E, potential energy satisfies U≤0.500EU \le 0.500E. Thus 12kx2≤0.500(12kA2)  ⟹  x2≤0.500A2\frac{1}{2}kx^2 \le 0.500\left(\frac{1}{2}kA^2\right) \implies x^2 \le 0.500A^2, giving ∣x∣≤A2≈0.707A|x| \le \frac{A}{\sqrt{2}} \approx 0.707A.

03

An oscillating system has amplitude A=0.500 mA = 0.500\text{ m}. An optical sensor is triggered only when the mass's speed vv is at least 80.0%80.0\% of its maximum speed vmaxv_{\text{max}}. Determine the maximum displacement ∣xmax∣|x_{\text{max}}| from equilibrium at which the sensor can be triggered.

Answer

∣xmax∣=0.300 m|x_{\text{max}}| = 0.300\text{ m}. Kinetic energy is proportional to v2v^2, so K=(vvmax)2E=(0.800)2E=0.640EK = \left(\frac{v}{v_{\text{max}}}\right)^2 E = (0.800)^2 E = 0.640E. The corresponding potential energy is U=E−K=(1−0.640)E=0.360EU = E - K = (1 - 0.640)E = 0.360E. Setting x2=0.360A2x^2 = 0.360A^2 yields ∣xmax∣=0.360 A=0.600⋅0.500 m=0.300 m|x_{\text{max}}| = \sqrt{0.360}\,A = 0.600 \cdot 0.500\text{ m} = 0.300\text{ m}.

Loading workspace…