Resources

Two identical rigid, thermally insulated flasks of equal volume VV are at thermal equilibrium at T=300 KT = 300\text{ K}. Flask A contains pure helium gas (MHe=4.003 g/molM_{\text{He}} = 4.003\text{ g/mol}) at pressure P0P_0. Flask B contains pure sulfur hexafluoride gas (MSF6=146.06 g/molM_{\text{SF}_6} = 146.06\text{ g/mol}) also at pressure P0P_0. A student hypothesizes that because both containers are at the identical macroscopic pressure and temperature, the microscopic momentum transfer per unit area per second must arise from identical individual molecular collision forces, and therefore both gases must have the same root-mean-square speed. Refute or substantiate this hypothesis by calculating: (a) the exact numerical ratio of their root-mean-square speeds, vrms, Hevrms, SF6\frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}}, and (b) the ratio of the average impulse imparted to a container wall in a single head-on elastic collision, JHeJSF6\frac{J_{\text{He}}}{J_{\text{SF}_6}}.

Answer and steps

Final answer

(a) vrms, Hevrms, SF6=6.04\frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = 6.04, (b) JHeJSF6=0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} = 0.166

Steps

Microscopic Origin of Gas Pressure

Macroscopic pressure PP is the time-averaged normal force per unit area exerted by colliding gas particles on a container wall: P=FtotalA=(collision frequency per area)⋅(average impulse per collision)1P = \frac{F_{\text{total}}}{A} = \frac{(\text{collision frequency per area}) \cdot (\text{average impulse per collision})}{1}

Even when two gases share identical macroscopic conditions (PP, VV, and TT), their microscopic dynamics differ substantially if their molar masses differ.


Part (a): Ratio of Root-Mean-Square Speeds

From the kinetic theory of gases, the translational kinetic energy per mole depends only on temperature TT: 12Mvrms2=32RT  ⟹  vrms=3RTM\frac{1}{2} M v_{\text{rms}}^2 = \frac{3}{2} R T \implies v_{\text{rms}} = \sqrt{\frac{3 R T}{M}}

Because both gases are at the same temperature T=300 KT = 300\text{ K}, their root-mean-square speeds are inversely proportional to the square root of their molar masses: vrms, Hevrms, SF6=MSF6MHe\frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \sqrt{\frac{M_{\text{SF}_6}}{M_{\text{He}}}}

Substitute the given molar masses: vrms, Hevrms, SF6=146.06 g/mol4.003 g/mol=36.488≈6.04\frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \sqrt{\frac{146.06\text{ g/mol}}{4.003\text{ g/mol}}} = \sqrt{36.488} \approx 6.04

This refutes the student's claim that both gases must have the same root-mean-square speed. The lighter helium atoms travel approximately 6.046.04 times faster than the heavier SFX6\ce{SF6} molecules at the same temperature.


Part (b): Ratio of Average Impulses per Collision

Consider a molecule of mass mm rebounding elastically from a rigid wall in a head-on collision at speed v≈vrmsv \approx v_{\text{rms}}. The initial momentum is pi=+mvp_i = +m v and the rebound momentum is pf=−mvp_f = -m v. The magnitude of the impulse JJ imparted to the wall is: J=∣Δp∣=2mvrmsJ = |\Delta p| = 2 m v_{\text{rms}}

Expressing this in terms of molar mass MM and temperature TT: J=2(MNA)3RTM=23RTMNA2∝MJ = 2\left(\frac{M}{N_{\text{A}}}\right)\sqrt{\frac{3 R T}{M}} = 2\sqrt{\frac{3 R T M}{N_{\text{A}}^2}} \propto \sqrt{M}

Taking the ratio of the impulses: JHeJSF6=MHe⋅vrms, HeMSF6⋅vrms, SF6=MHeMSF6=16.04≈0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} = \frac{M_{\text{He}} \cdot v_{\text{rms, He}}}{M_{\text{SF}_6} \cdot v_{\text{rms, SF}_6}} = \sqrt{\frac{M_{\text{He}}}{M_{\text{SF}_6}}} = \frac{1}{6.04} \approx 0.166


Physical Resolution of the Student's Hypothesis

The student's hypothesis fails because macroscopic pressure depends on both the impulse per collision (JJ) and the rate of collisions (ff):

  • A heavier molecule (SFX6\ce{SF6}) delivers a much larger individual impulse (JSF6≈6.04⋅JHeJ_{\text{SF}_6} \approx 6.04 \cdot J_{\text{He}}), but moves much more slowly and therefore strikes the wall far less frequently.
  • A lighter molecule (He\ce{He}) delivers a smaller impulse (JHe≈0.166⋅JSF6J_{\text{He}} \approx 0.166 \cdot J_{\text{SF}_6}), but strikes the wall with a proportionally higher frequency (fHe≈6.04⋅fSF6f_{\text{He}} \approx 6.04 \cdot f_{\text{SF}_6}).

Because the higher collision frequency of helium exactly compensates for its smaller impulse per hit, both gases exert the same total macroscopic pressure P0P_0.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to take the square root of the molar mass ratio when calculating the ratio of rms speeds, believing rms speed is inversely proportional to molar mass directly.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vrms=3RTM  ⟹  vrms, Hevrms, SF6=MSF6MHe=146.064.003=36.49  ⟹  The hypothesis is refuted, ratio is 36.49v_{\text{rms}} = \frac{3RT}{M} \implies \frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \frac{M_{\text{SF}_6}}{M_{\text{He}}} = \frac{146.06}{4.003} = 36.49 \implies \text{The hypothesis is refuted, ratio is } 36.49

    Correct

    vrms=3RTM  ⟹  vrms, Hevrms, SF6=MSF6MHe=146.064.003≈6.04v_{\text{rms}} = \sqrt{\frac{3RT}{M}} \implies \frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \sqrt{\frac{M_{\text{SF}_6}}{M_{\text{He}}}} = \sqrt{\frac{146.06}{4.003}} \approx 6.04

    You omitted the square root in the formula for root-mean-square speed. Because kinetic energy is proportional to v2v^2, the speed varies inversely with the square root of the molar mass, M\sqrt{M}, rather than with MM directly.

  2. Step 2

    J=2mv  ⟹  JHeJSF6=MHeMSF6⋅vrms, Hevrms, SF6=(4.003146.06)⋅36.49=1.00  ⟹  JHeJSF6=1.00J = 2mv \implies \frac{J_{\text{He}}}{J_{\text{SF}_6}} = \frac{M_{\text{He}}}{M_{\text{SF}_6}} \cdot \frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \left(\frac{4.003}{146.06}\right) \cdot 36.49 = 1.00 \implies \frac{J_{\text{He}}}{J_{\text{SF}_6}} = 1.00

    Correct

    JHeJSF6=MHeMSF6⋅vrms, Hevrms, SF6=(4.003146.06)⋅6.04≈0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} = \frac{M_{\text{He}}}{M_{\text{SF}_6}} \cdot \frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \left(\frac{4.003}{146.06}\right) \cdot 6.04 \approx 0.166

    Your reasoning relating impulse to momentum change (J=2mvJ = 2mv) and your ratio setup were completely correct. The numerical result was off only because you carried forward the incorrect speed ratio from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly refuted the claim that the root-mean-square speeds are equal.

You properly defined the impulse for an elastic head-on wall collision as J=2mvJ = 2mv.

You correctly expressed the impulse ratio as the product of the mass ratio and the velocity ratio.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of square root in rms speed formula

You wrote vrms=3RTMv_{\text{rms}} = \frac{3RT}{M} instead of vrms=3RTMv_{\text{rms}} = \sqrt{\frac{3RT}{M}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing mean square speed v2‾=3RTM\overline{v^2} = \frac{3RT}{M} with root-mean-square speed vrms=v2‾v_{\text{rms}} = \sqrt{\overline{v^2}}, leading to treating speed as inversely linear with molar mass instead of following an inverse-square-root dependence.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy to Speed
  • Translational kinetic energy per mole is 12Mvrms2=32RT\frac{1}{2}M v_{\text{rms}}^2 = \frac{3}{2}RT.

  • Solve for vrmsv_{\text{rms}} by always taking the square root: vrms=3RTMv_{\text{rms}} = \sqrt{\frac{3RT}{M}}.

Scaling of Impulse
  • Single collision impulse scales as J=2mv∝M1M=MJ = 2mv \propto M \sqrt{\frac{1}{M}} = \sqrt{M}.

  • Ensure that the heavier molecule imparts a larger single impulse (J∝MJ \propto \sqrt{M}) while colliding less frequently.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct rms speed ratio: vrms, Hevrms, SF6=146.064.003=36.488≈6.04\frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \sqrt{\frac{146.06}{4.003}} = \sqrt{36.488} \approx 6.04.

  2. Substitute this value into your impulse ratio formula: JHeJSF6=4.003146.06×6.04=6.0436.488≈0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} = \frac{4.003}{146.06} \times 6.04 = \frac{6.04}{36.488} \approx 0.166.

Final answer

(a) vrms, Hevrms, SF6=6.04\frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = 6.04, (b) JHeJSF6=0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} = 0.166

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check dimensional consistency of velocity formulas: RTM\frac{RT}{M} has units of m2/s2\text{m}^2/\text{s}^2, requiring a square root to yield m/s\text{m}/\text{s}.

  • Practice deriving vrmsv_{\text{rms}} directly from 12mvrms2=32kBT\frac{1}{2}mv_{\text{rms}}^2 = \frac{3}{2}k_{\text{B}}T to reinforce where the square root originates.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio by assuming rms speed is directly proportional to the square root of molar mass rather than inversely proportional.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vrms=3RTM  ⟹  vrms, Hevrms, SF6=MHeMSF6=4.003146.06=0.02741≈0.166  ⟹  The hypothesis is refuted, ratio is 0.166v_{\text{rms}} = \sqrt{3RTM} \implies \frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \sqrt{\frac{M_{\text{He}}}{M_{\text{SF}_6}}} = \sqrt{\frac{4.003}{146.06}} = \sqrt{0.02741} \approx 0.166 \implies \text{The hypothesis is refuted, ratio is } 0.166

    Correct

    vrms=3RTM  ⟹  vrms, Hevrms, SF6=MSF6MHe=146.064.003≈6.04v_{\text{rms}} = \sqrt{\frac{3RT}{M}} \implies \frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \sqrt{\frac{M_{\text{SF}_6}}{M_{\text{He}}}} = \sqrt{\frac{146.06}{4.003}} \approx 6.04

    You inverted the dependence on molar mass by writing vrms=3RTMv_{\text{rms}} = \sqrt{3RTM} instead of vrms=3RTMv_{\text{rms}} = \sqrt{\frac{3RT}{M}}. Because kinetic energy per mole is 12Mvrms2=32RT\frac{1}{2} M v_{\text{rms}}^2 = \frac{3}{2} R T, heavier molecules must move slower at the same temperature, making root-mean-square speed inversely proportional to the square root of molar mass.

  2. Step 2

    J=2mv  ⟹  JHeJSF6=MHe⋅vrms, HeMSF6⋅vrms, SF6=(4.003146.06)⋅0.166≈0.00455  ⟹  JHeJSF6≈0.00455J = 2mv \implies \frac{J_{\text{He}}}{J_{\text{SF}_6}} = \frac{M_{\text{He}} \cdot v_{\text{rms, He}}}{M_{\text{SF}_6} \cdot v_{\text{rms, SF}_6}} = \left(\frac{4.003}{146.06}\right) \cdot 0.166 \approx 0.00455 \implies \frac{J_{\text{He}}}{J_{\text{SF}_6}} \approx 0.00455

    Correct

    JHeJSF6=MHeMSF6⋅vrms, Hevrms, SF6=(4.003146.06)⋅6.044=MHeMSF6≈0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} = \frac{M_{\text{He}}}{M_{\text{SF}_6}} \cdot \frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \left(\frac{4.003}{146.06}\right) \cdot 6.044 = \sqrt{\frac{M_{\text{He}}}{M_{\text{SF}_6}}} \approx 0.166

    Your formulation for the collision impulse J=2mvJ = 2mv and your ratio setup were completely sound, but substituting the inverted speed ratio from Step 1 led to an incorrect final value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly concluded that the student's hypothesis is refuted.

You correctly set up the elastic collision impulse equation as J=2mvJ = 2mv.

You correctly related the ratio of impulses to the product of molar mass and rms speed ratios.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Inversion Error

You multiplied by molar mass inside the square root instead of dividing by it when recalling the root-mean-square speed formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated higher mass with higher speed rather than remembering that at a fixed temperature, all ideal gases share the same average kinetic energy, requiring heavier particles to move slower (vrms∝1Mv_{\text{rms}} \propto \frac{1}{\sqrt{M}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Equipartition
  • Translational kinetic energy per mole is 12Mvrms2=32RT\frac{1}{2}M v_{\text{rms}}^2 = \frac{3}{2}RT.

  • Always isolate vrmsv_{\text{rms}} algebraically from kinetic energy to verify that mass appears in the denominator: vrms=3RTMv_{\text{rms}} = \sqrt{\frac{3RT}{M}}.

Physical Reality Check
  • Lighter particles move faster than heavier particles at the same temperature.

  • Check whether your calculated ratio satisfies vrms, light>vrms, heavyv_{\text{rms, light}} > v_{\text{rms, heavy}} before moving on.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the kinetic energy relation: 12Mvrms2=32RT  ⟹  vrms=3RTM\frac{1}{2} M v_{\text{rms}}^2 = \frac{3}{2} R T \implies v_{\text{rms}} = \sqrt{\frac{3 R T}{M}}.

  2. Set up the inverse square-root ratio: vrms, Hevrms, SF6=MSF6MHe=146.064.003≈6.04\frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \sqrt{\frac{M_{\text{SF}_6}}{M_{\text{He}}}} = \sqrt{\frac{146.06}{4.003}} \approx 6.04.

  3. Substitute this correct speed ratio into your impulse ratio: JHeJSF6=(4.003146.06)⋅6.044=6.04436.488≈0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} = \left(\frac{4.003}{146.06}\right) \cdot 6.044 = \frac{6.044}{36.488} \approx 0.166.

Final answer

(a) vrms, Hevrms, SF6≈6.04\frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} \approx 6.04, (b) JHeJSF6≈0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} \approx 0.166

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how the Maxwell-Boltzmann distribution and thermal kinetic energy depend on particle mass.

  • Practice deriving vrmsv_{\text{rms}} from 12m⟨v2⟩=32kBT\frac{1}{2} m \langle v^2 \rangle = \frac{3}{2} k_{\text{B}} T instead of memorizing the formula without context.

  • Complete the three follow-up practice drills on microscopic gas collisions.

OverviewACEpath Teacher's Diagnosis

03 The student assumes impulse in a single collision depends only on velocity rather than momentum, omitting the particle mass from the impulse calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vrms=3RTM  ⟹  vrms, Hevrms, SF6=MSF6MHe=146.064.003≈6.04v_{\text{rms}} = \sqrt{\frac{3RT}{M}} \implies \frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \sqrt{\frac{M_{\text{SF}_6}}{M_{\text{He}}}} = \sqrt{\frac{146.06}{4.003}} \approx 6.04

  2. Step 2

    J=2v  ⟹  JHeJSF6=vrms, Hevrms, SF6J = 2v \implies \frac{J_{\text{He}}}{J_{\text{SF}_6}} = \frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}}

    Correct

    J=∣Δp∣=2mv  ⟹  JHeJSF6=mHevrms, HemSF6vrms, SF6=MHeMSF6J = |\Delta p| = 2mv \implies \frac{J_{\text{He}}}{J_{\text{SF}_6}} = \frac{m_{\text{He}} v_{\text{rms, He}}}{m_{\text{SF}_6} v_{\text{rms, SF}_6}} = \sqrt{\frac{M_{\text{He}}}{M_{\text{SF}_6}}}

    Impulse is defined as the change in momentum, J=∣Δp∣=2mvJ = |\Delta p| = 2mv, not 2v2v. Omitting the particle mass led to equating the impulse ratio directly to the velocity ratio.

  3. Step 3

    JHeJSF6=6.04\frac{J_{\text{He}}}{J_{\text{SF}_6}} = 6.04

    Correct

    JHeJSF6=16.04≈0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} = \frac{1}{6.04} \approx 0.166

    Because mass was omitted from the impulse expression in step 2, your final ratio is inverted relative to the correct momentum-based ratio.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that root-mean-square speed depends inversely on the square root of molar mass.

You computed the correct numerical ratio of 6.046.04 for part (a) and correctly concluded that the student hypothesis was refuted.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Mass in Impulse Formula

You wrote J=2vJ = 2v instead of J=2mvJ = 2mv when finding the impulse on the container wall.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated particle velocity with particle momentum when analyzing the mechanical impact on the wall, forgetting that impulse reflects momentum transfer rather than speed change alone.

REASONING PATH
Your ACEpath teacher’s suggested approach
Impulse-Momentum Theorem
  • For a particle of mass mm rebounding elastically at normal speed vv, the impulse imparted to the wall is J=∣Δp∣=2mvJ = |\Delta p| = 2mv.

  • Always write impulse in terms of momentum (p=mvp = mv) before substituting speeds or taking ratios.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the impulse for a normal elastic collision: J=2mv=2(MNA)vrmsJ = 2mv = 2\left(\frac{M}{N_{\text{A}}}\right)v_{\text{rms}}.

  2. Form the ratio of impulses: JHeJSF6=MHeMSF6⋅vrms, Hevrms, SF6\frac{J_{\text{He}}}{J_{\text{SF}_6}} = \frac{M_{\text{He}}}{M_{\text{SF}_6}} \cdot \frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}}.

  3. Substitute vrms, Hevrms, SF6=MSF6MHe\frac{v_{\text{rms, He}}}{v_{\text{rms, SF}_6}} = \sqrt{\frac{M_{\text{SF}_6}}{M_{\text{He}}}} to obtain JHeJSF6=MHeMSF6=136.488=16.04≈0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} = \sqrt{\frac{M_{\text{He}}}{M_{\text{SF}_6}}} = \frac{1}{\sqrt{36.488}} = \frac{1}{6.04} \approx 0.166.

Final answer

JHeJSF6≈0.166\frac{J_{\text{He}}}{J_{\text{SF}_6}} \approx 0.166

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the microscopic definition of gas pressure as the product of collision rate and average impulse per collision (P∝f⋅JP \propto f \cdot J).

  • Practice deriving how J∝MJ \propto \sqrt{M} and collision frequency f∝1/Mf \propto 1/\sqrt{M} combine to keep pressure independent of molecular mass at a given TT and number density.

Lock it in

Similar question

01

Two containers at T=400 KT = 400\text{ K} contain neon gas (M=20.18 g/molM = 20.18\text{ g/mol}) and krypton gas (M=83.80 g/molM = 83.80\text{ g/mol}) respectively. Calculate the ratio of their root-mean-square speeds, vrms, Nevrms, Kr\frac{v_{\text{rms, Ne}}}{v_{\text{rms, Kr}}}.

Answer

vrms, Nevrms, Kr=MKrMNe=83.8020.18=4.153≈2.04\frac{v_{\text{rms, Ne}}}{v_{\text{rms, Kr}}} = \sqrt{\frac{M_{\text{Kr}}}{M_{\text{Ne}}}} = \sqrt{\frac{83.80}{20.18}} = \sqrt{4.153} \approx 2.04.

02

A container holds an equimolar mixture of HX2\ce{H2} (M=2.016 g/molM = 2.016\text{ g/mol}) and OX2\ce{O2} (M=32.00 g/molM = 32.00\text{ g/mol}) in thermal equilibrium. Find the ratio of the average wall collision impulse imparted by a single hydrogen molecule to that imparted by an oxygen molecule, JHX2JOX2\frac{J_{\ce{H2}}}{J_{\ce{O2}}}.

Answer

Since J=2mvrms∝M1M=MJ = 2mv_{\text{rms}} \propto M \sqrt{\frac{1}{M}} = \sqrt{M}, the impulse ratio is JHX2JOX2=MHX2MOX2=2.01632.00=0.063≈0.251\frac{J_{\ce{H2}}}{J_{\ce{O2}}} = \sqrt{\frac{M_{\ce{H2}}}{M_{\ce{O2}}}} = \sqrt{\frac{2.016}{32.00}} = \sqrt{0.063} \approx 0.251.

03

Two ideal gases, Gas 1 (M1M_1) and Gas 2 (M2M_2), are at the same temperature and pressure. The collision frequency per unit wall area scales as f∝nvrmsf \propto n v_{\text{rms}}. Show how the product of impulse per collision JJ and collision frequency ff explains why both gases exert the identical pressure PP.

Answer

P∝f⋅JP \propto f \cdot J. At constant PP and TT, number density nn is equal. Since vrms∝M−1/2v_{\text{rms}} \propto M^{-1/2}, collision frequency scales as f∝M−1/2f \propto M^{-1/2}. Impulse per collision scales as J=2mvrms∝M⋅M−1/2=M1/2J = 2mv_{\text{rms}} \propto M \cdot M^{-1/2} = M^{1/2}. Therefore, P∝f⋅J∝M−1/2⋅M1/2=M0=1P \propto f \cdot J \propto M^{-1/2} \cdot M^{1/2} = M^0 = 1, confirming macroscopic pressure is independent of molar mass.

Loading workspace…