Resources
A standard fission commercial nuclear power plant operates at a thermal power of utilizing low-enriched uranium fuel where each fission event releases an average of . In contrast, an experimental tokamak fusion device consumes a D-T gas mixture where each fusion event releases . (a) Calculate the daily consumption of in kilograms per day () for the fission plant running at full thermal capacity for 24.0 hours (, , molar mass ). (b) Calculate the mass in grams per day () of deuterium (, ) required to produce the equivalent total thermal energy output ( for 24.0 hours) in the fusion device.
Answer and steps
Final answer
(a) of ; (b) of deuterium.
Steps
Total Daily Energy Generation
Both the fission reactor and the fusion device are evaluated at the same continuous thermal output over a 24.0-hour period.
The total thermal energy produced in one day is:
Substituting and :
Part (a): Daily Consumption of in Fission
In a fission event, a heavy nucleus absorbs a thermal neutron and splits into lighter fragment nuclei, releasing binding energy:
The total number of fission reactions required to supply is:
The required mass of pure fuel consumed per day is obtained from its molar mass and Avogadro's number :
Evaluating with the given values:
(Pitfall: Do not confuse the total mass of low-enriched fuel assemblies with the mass of consumed; this calculation determines solely the mass of the fissile isotope undergoing fission.)
Part (b): Daily Mass of Deuterium () in Fusion
In a deuterium-tritium (D-T) fusion reaction, two light hydrogen isotopes combine to form a helium nucleus and a free neutron:
Each reaction consumes exactly one deuterium nucleus and releases:
The total number of fusion reactions needed to supply the identical daily energy is:
Since one nucleus () is required per reaction, the mass of deuterium consumed per day is:
Evaluating gives:
Physical Distinction Between Fission and Fusion
Although a single fission event releases more total energy () than a D-T fusion event (), fusion provides a significantly higher energy yield per unit mass of fuel:
- In fission, .
- In D-T fusion, (roughly 4 times greater energy density).
As a result, generating the equivalent total energy requires only hundreds of grams of light fusion fuel compared to several kilograms of heavy fissile fuel.
Typical errors
01 The student forgets to convert megavolts/electronvolts using the mega- prefix (10^6), treating MeV directly as eV.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You converted the energy value as if it were in electronvolts () rather than mega-electronvolts (), missing the factor of .
- Step 3Correct
Your formula and calculation method were completely sound, but the result is six orders of magnitude too large due to the missing factor from Step 2.
- Step 4Correct
You repeated the same conversion omission here, treating as without multiplying by .
- Step 5Correct
Your algebraic method for determining the mass of deuterium was correct, but your numerical answer inherited the factor error from Step 4.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the total daily thermal energy from plant power and operating duration.
You used the exact relationship between total energy, energy per reaction, and reaction count.
You applied Avogadro's constant and molar mass properly to convert particle counts into macroscopic masses.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the numerical value of directly into the conversion factor for without first expanding .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated mega-electronvolts () with base electronvolts (), skipping the SI prefix expansion step prior to applying .
REASONING PATH
Your ACEpath teacher’s suggested approach- Expand SI unit prefixes first
and .
Always write out as in your first line of conversion before multiplying by .
- Perform an order-of-magnitude sanity check
Commercial gigawatt-scale fission plants consume on the order of a few kilograms of per day, not millions of kilograms.
Check whether your final mass output aligns with realistic physical plant operating scales.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert fission energy: .
Calculate daily mass: .
Convert fusion energy: .
Calculate deuterium daily mass: .
(a) of ; (b) of deuterium.
02 The student omits the seconds conversion factor and calculates energy using time in hours instead of seconds.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
A Watt is defined as one Joule per second (). Multiplying power in Watts by time in hours yields Watt-hours (), not Joules. You need to multiply by to obtain the energy in Joules.
- Step 2Correct
You converted into Joules correctly. The division to find the required number of fission events is methodologically sound, but the result is smaller by a factor of due to the earlier value.
- Step 3Correct
Your stoichiometric conversion using Avogadro's number and the molar mass of is completely correct, but the final numerical value is affected by the inherited energy error.
- Step 4Correct
You calculated the energy per fusion event in Joules accurately and set up the reaction count correctly, but the result carries forward the unscaled energy from Step 1.
- Step 5Correct
Your method of converting deuterium nucleus count into grams per day is fully correct, but the final answer is low by a factor of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted energy from to using the elementary charge conversion factor .
You set up the correct physical ratio to determine the total number of reactions from total energy and reaction energy.
You accurately applied molar mass and Avogadro's constant to relate particle counts to macroscopic fuel mass.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated time in hours directly as seconds when evaluating with power in Watts, omitting the factor of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking that the SI unit of power, the Watt (), is equivalent to Joules per second (), which requires all time variables in the base energy formula to be expressed in seconds before evaluating energy in Joules.
REASONING PATH
Your ACEpath teacher’s suggested approach- Base SI Unit Consistency
, so .
Whenever power is in Watts or Megawatts, immediately convert operating durations into seconds () before multiplying.
- Dimensional Tracking
Multiplying produces Watt-hours (), where .
Write out the units explicitly next to each number during substitution to catch unit mismatches before computing.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the daily duration to base SI units: .
Calculate the total daily thermal energy in Joules: .
Compute the required fissions and mass: , so .
Compute the required deuterium fusions and mass: , so .
(a) ; (b)
03 The student incorrectly assumes both nuclei in the D-T reaction are deuterium, using double the mass of deuterium per fusion reaction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
In a deuterium-tritium (D-T) fusion reaction (), each reaction consumes exactly one deuterium () nucleus and one tritium () nucleus, not two deuterium nuclei.
- Step 5Correct
Your mass calculation followed your previous step correctly, but the numerical value was doubled because of the factor of 2 in .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the daily total thermal energy generated by the power plant.
You correctly converted MeV to joules and used Avogadro's number and molar mass to find the mass of .
You correctly determined the total number of D-T fusion reactions required to meet the energy demand.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that both reactant nuclei in D-T fusion are deuterium, mistakenly doubling the required number of deuterium nuclei per reaction () instead of using the stoichiometric ratio of one deuterium nucleus per fusion event.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Reactant Stoichiometry
In a binary nuclear reaction , check the number of nuclei of species A consumed per single reaction event.
Write out the complete balanced nuclear reaction before calculating fuel requirements.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the stoichiometric ratio for D-T fusion: .
Calculate the daily mass of deuterium: .
(a) of ; (b) of deuterium.
Lock it in
What does the unit prefix represent in , and what is its exact equivalence in joules ()?
stands for mega (). Thus, .
Similar question
An alpha particle emitted in radioactive decay has a kinetic energy of . Calculate its kinetic energy in joules ().
Answer
.
A small research reactor operates at an average thermal power of . If each fission releases , how many fission events occur per second?
Answer
. Rate of fission reactions: .
A deuterium-tritium fusion reactor generates of thermal power. Each fusion event releases and consumes one tritium nucleus (, molar mass ). Calculate the mass of tritium in grams required to operate continuously for 1.00 hour ().
Answer
Total thermal energy in 1.00 hour: . Single event energy: . Number of reactions: . Daily mass consumed: .