Resources
An electron (mass , charge ) is launched from an equipotential line with potential with an initial speed at an angle relative to the equipotential line. The local electric field is uniform, points perpendicularly across the equipotential lines toward regions of lower potential, and has magnitude . (a) By coupling work-energy principles with kinematics, determine the potential of the turnaround equipotential line where the electron's velocity is parallel to the equipotential lines (perpendicular velocity component momentarily zero). (b) Calculate the maximum perpendicular distance the electron penetrates beyond equipotential line . (c) Find the speed of the electron when it traverses an equipotential line at .
Answer and steps
Final answer
(a) (or ); (b) ; (c)
Steps
Part (a): Potential of the Turnaround Equipotential Line
-
Resolve the initial velocity into components: Let the -axis be parallel to the equipotential lines and the -axis be perpendicular to them.
- Component parallel to the equipotential line:
- Component perpendicular to the equipotential line:
-
Kinetic energy lost in the perpendicular direction: Since the electric field is perpendicular to the equipotential lines, there is no force in the parallel direction, meaning remains constant. At the turnaround line , the perpendicular component of velocity momentarily drops to zero ().
The kinetic energy converted due to perpendicular motion is:
In electron-volts ():
- Determine the turnaround potential : Adding this potential difference to the launch potential :
Part (b): Maximum Perpendicular Penetration Distance
- Relate electric field to potential gradient: In a uniform electric field, the magnitude of the potential difference over a displacement perpendicular to equipotential lines is:
-
Solve for :
Alternative via kinematics: The acceleration opposing the motion has magnitude:
Part (c): Final Speed at Equipotential Line
- Calculate the work done on the electron: By the work-energy theorem:
-
Determine the total final kinetic energy: The initial total kinetic energy is:
The final kinetic energy at line is:
- Compute the final speed :
Typical errors
01 The student forgets that the turnaround velocity has a non-zero component parallel to the equipotential line, assuming the electron comes to a complete stop.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You assumed the electron comes to a complete rest at point (). Because the electric field is perpendicular to the equipotential lines, there is no force parallel to them, so the parallel velocity component remains constant. Only the perpendicular kinetic energy drops to zero at the turnaround line.
- Step 2Correct
Your formula relating electric field magnitude to potential difference across perpendicular distance is completely correct. However, your numerical result is affected by the incorrect potential difference carried over from part (a).
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the work-energy theorem in part (c) to calculate the electron's final speed.
You correctly related electric field magnitude and potential difference through in part (b).
You correctly used the mass and charge constants of the electron in your calculations.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeWHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated 2D motion across equipotential lines as a 1D stopping problem, overlooking that electric forces perpendicular to equipotential lines leave the parallel velocity component unaffected.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Motion Along and Across Equipotential Lines
Electric field lines are always perpendicular to equipotential lines, meaning has zero component along equipotential lines.
Separate the initial velocity into (parallel, constant) and (perpendicular, accelerated).
- Define 'Turnaround' for 2D Projectile Motion
At a maximum perpendicular penetration point, only the perpendicular velocity component vanishes: , while .
Equate the work done by the electric field only to the change in perpendicular kinetic energy: .
CORRECTED PATH
ACEpath Teacher's DemonstrationResolve the launch velocity into perpendicular and parallel components: .
At turnaround line , set while remains unchanged.
Equate the loss in perpendicular kinetic energy to the electric potential energy gain: .
Find the potential difference: .
Add to to obtain .
Use the corrected potential difference to re-evaluate part (b): .
(a) ; (b) ; (c)
02 The student treats the electron charge as positive, resulting in an incorrect sign for the electric potential change.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4
The electron cannot reach because kinetic energy becomes negative.
CorrectBecause an electron carries a negative charge (), moving toward a higher electric potential () results in positive electric work done on the particle: . The electron speeds up rather than slowing down. Subtracting this energy term produced an unphysical negative kinetic energy.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the launch velocity into parallel and perpendicular components.
You applied work-energy principles accurately in part (a) to find the potential at the turnaround point.
You used the uniform field relation correctly in part (b) to find the penetration depth.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the work done on the negative charge as if it were a positive charge losing kinetic energy when moving to a higher electric potential, missing that , which increases kinetic energy.
REASONING PATH
Your ACEpath teacher’s suggested approach- Work Done on a Charge in an Electric Field
Always substitute the sign of the charge explicitly into . For an electron with , moving to a higher potential () yields positive work .
- Spontaneous Motion of Negative Charges
Positive charges naturally accelerate toward lower potential; negative charges naturally accelerate toward higher potential.
When an electron moves from a lower potential () to a higher potential (), it is accelerated by the field, meaning its kinetic energy must increase.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the work done by the field: .
Calculate the initial total kinetic energy: .
Find the total kinetic energy at line : .
Solve for the final speed: .
03 The student misidentifies the launch angle by taking sin(30.0°) instead of cos(30.0°) for the velocity parallel to the equipotential line.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the launch angle is defined relative to the equipotential line (the parallel direction), the adjacent component is parallel () and the opposite component is perpendicular ().
- Step 2Correct
Your work-energy setup correctly relates perpendicular kinetic energy to electric potential difference, but substituting the incorrect perpendicular velocity gave an inflated energy loss and an incorrect potential .
- Step 3Correct
Your formula relating potential difference and electric field () is completely correct, but the value is carried over from the incorrect in Part (a).
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the parallel velocity component is unaffected by the perpendicular electric field.
You applied the work-energy theorem flawlessly in Part (c) to determine the electron's final speed.
You used the correct relationship between uniform electric field and potential difference, .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used instead of when finding the velocity component perpendicular to the equipotential line.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhenever an angle is measured relative to a surface or boundary line rather than its normal, the component along the surface uses cosine, while the perpendicular (normal) component uses sine. Defaulting to cosine for the perpendicular axis inverted the two components.
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Line Identification
Identify the reference axis from which is measured: the adjacent component is , and the opposite component is .
Since is given relative to the equipotential line, sketch the right triangle: parallel is adjacent (), perpendicular is opposite ().
- Turnaround Condition
At the turnaround point across equipotential lines, only the perpendicular velocity component vanishes.
Set only , ensuring you substitute .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the perpendicular velocity component: .
Find the kinetic energy associated with perpendicular motion: .
Convert to potential change: , yielding .
Determine maximum perpendicular penetration: .
(a) ; (b) ; (c)
Lock it in
When a charged particle moves across a uniform electric field, what is the force component parallel to the equipotential lines?
Zero. Because electric field lines are strictly perpendicular to equipotential lines, has no component parallel to them, so parallel velocity is constant.
Similar question
A proton (, ) is launched from an equipotential line of with speed at an angle of toward regions of higher potential in a uniform field of . Find the potential of the equipotential line where its perpendicular velocity momentarily reaches zero.
Answer
. Key steps: . The perpendicular kinetic energy is . In volts, . Therefore, .
In a uniform electric field , an alpha particle (, ) is projected at an angle to the equipotential lines. If its perpendicular penetration depth is and its parallel velocity is , calculate its total speed at launch.
Answer
. Key steps: Potential difference traversed is . Energy conservation for perpendicular motion gives , so . Total initial speed is .
An electron enters a region between two parallel plates with a uniform electric field oriented in the -direction. The electron is injected at the origin on the equipotential line with velocity . Determine the potential and coordinates of the point where the electron's velocity is parallel to the plates.
Answer
and . Key steps: Since points in , the force on the electron is (in ). Here moves along the electric force, accelerating in . Wait, for velocity to become parallel to the plates (), initial velocity must oppose force; if toward , deceleration is . Time to turnaround is . Horizontal displacement . Vertical penetration . Potential at turnaround: .