Resources
A clean cesium photocathode has a work function threshold of . Photons from a tunable monochromatic source are directed at the surface to induce the photoelectric effect. (a) Calculate the maximum cutoff wavelength (in ) capable of ejecting photoelectrons from the cesium surface. (b) If the incident radiation is tuned to an edge-case wavelength of , determine whether photoelectrons are ejected, and if so, calculate their maximum kinetic energy in electron-volts ().
Answer and steps
Final answer
(a) ; (b) Photons at possess , which precisely matches the threshold work function , so electrons are liberated with impending zero kinetic energy ().
Steps
Part (a): Maximum Cutoff Wavelength
According to the quantum model of the photoelectric effect, an electron bound inside a metal surface requires a minimum amount of energy, known as the work function , to escape.
The energy of a single photon of light is inversely proportional to its wavelength :
where:
- is Planck's constant ( or )
- is the speed of light in a vacuum ()
- The product is a convenient constant for calculations involving nanometers and electron-volts.
The cutoff (or threshold) wavelength corresponds to the minimum photon energy required to liberate an electron, which occurs when the photon energy precisely equals the work function ():
Solving for :
(Note: Wavelengths longer than have photon energies less than and cannot eject electrons, regardless of the light intensity.)
Part (b): Kinetic Energy at
Einstein's photoelectric equation describes the conservation of energy during the absorption of a photon:
Calculate the energy of a photon with wavelength :
Compare the photon energy to the work function:
- Because , the incoming photon provides just enough energy to overcome the binding forces of the cesium surface. Therefore, photoelectrons are ejected.
- Substituting this into Einstein's equation yields their maximum kinetic energy:
The photoelectrons are liberated at the surface with impending zero kinetic energy ().
Typical errors
01 The student misremembers Einstein's photoelectric equation by reversing the terms as K_max = Φ - E, leading to a negative subtraction that yields a positive kinetic energy despite the photon energy being below the threshold.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
Photoelectrons are ejected with
CorrectBy energy conservation, the incoming photon supplies energy , a portion pays the escape cost, and the remainder becomes kinetic energy: . Reversing the difference allowed a sub-threshold or threshold photon to appear to produce positive kinetic energy.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the threshold relationship to calculate the maximum wavelength.
You used the photon energy equation accurately to evaluate the incident beam's energy.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set instead of subtracting the metal's binding energy from the incoming photon energy.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the energy source with the energy barrier in the conservation equation: the incoming photon energy must overcome the work function , so the surplus kinetic energy is .
REASONING PATH
Your ACEpath teacher’s suggested approach- Energy Balance in the Photoelectric Effect
Conservation of energy dictates: , which rearranges to .
Always verify that the photon energy is the positive supply and is the subtracted threshold cost.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompare the incident photon energy to the work function .
Apply Einstein's photoelectric equation: .
Evaluate the difference: .
Photoelectrons are ejected with impending zero kinetic energy ().
02 The student applies the condition λ < λ_max backwards, believing photoelectrons are emitted whenever the wavelength exceeds the cutoff threshold.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
hc / {} = \Phi {} = {} = 5.80 10^{-7} = 580
- Step 2
{} 580 580,
CorrectBecause photon energy is inversely proportional to wavelength (), higher photon energies correspond to shorter wavelengths. Photoelectric emission requires , which means the wavelength must satisfy , not .
- Step 3
E = = 2.138 K_{} = E - \Phi = 2.138 - 2.14 = -0.002_
CorrectK_{} = E - \Phi = 2.14 - 2.14 = 0.00_
At the threshold cutoff wavelength, the photon energy matches the work function (), yielding . Kinetic energy cannot be negative in the photoelectric effect; slight discrepancies from rounding intermediate constants should not result in a negative kinetic energy.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and applied the photoelectric threshold formula .
You performed accurate unit conversions between joules and electron-volts to solve for in nanometers.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeMinor rounding differences in produced , which led to a negative difference of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the threshold wavelength as a lower bound rather than an upper bound because you overlooked the inverse relationship between photon energy and wavelength ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Energy vs. Wavelength Inequality
Always verify that shorter wavelengths mean higher energy; ejection requires wavelengths equal to or shorter than the cutoff wavelength.
- Physical Kinetic Energy Bound
If your calculated is negative or zero within rounding error at the cutoff wavelength, report because kinetic energy cannot be negative.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the ejection condition from energy conservation: emission occurs when , which corresponds to .
Evaluate at the edge case : since , incoming photons provide exactly enough energy to overcome the binding work function.
Compute the maximum kinetic energy: .
(a) ; (b) Photoelectrons are ejected with .
03 The student uses the work function value in electron-volts directly as Joules without converting by the elementary charge, resulting in an extremely small cutoff wavelength.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You substituted and in SI units (Joules and meters) in the numerator, but substituted directly in electron-volts in the denominator without converting to Joules (). This resulted in a cutoff wavelength that was too small by a factor of .
- Step 3
- Step 4
580 > 9.30 10^{-17},
CorrectE = 3.43 10^{-19} = 2.14 = \Phi = 580 {}, K{} = 0.00.
Your comparison followed logically from your erroneous cutoff wavelength in Step 2. Because the true cutoff wavelength is , photons at have exactly enough energy to overcome , liberating electrons with .
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct physical formulas for both the threshold wavelength and the photon energy.
You correctly handled SI prefix conversions when converting into meters.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the value directly into the denominator while keeping Planck's constant in Joules-seconds, forgetting to convert electron-volts to Joules.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou mixed energy units across the fraction, combining in the numerator with in the denominator instead of maintaining a single energy system (either all Joules or all electron-volts).
REASONING PATH
Your ACEpath teacher’s suggested approach- Match energy units before computing
If is in , energy must be in Joules: .
Always check whether energy is given in or before plugging values into or .
- Use the shortcut constant $hc \approx 1240\text{ eV}\cdot\text{nm}$
When energy is in and wavelength is in , use .
Use for fast, unit-safe calculations in atomic and quantum physics problems.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert to Joules: (or directly use ).
Calculate .
Compare incident wavelength with : since , photoelectrons are ejected.
Determine maximum kinetic energy: .
(a) ; (b) Yes, photoelectrons are ejected with .
Lock it in
State Einstein's photoelectric equation relating maximum electron kinetic energy , photon energy , and work function .
(or ). Memory cue: Kinetic energy is the surplus left over after the photon energy pays the metal's exit fee .
Similar question
Light of wavelength is incident on a potassium surface with work function . Determine the maximum kinetic energy of the ejected photoelectrons in . (Use )
Answer
. Key steps: ; .
A metal photocathode emits electrons with when irradiated with photons of wavelength . Find the work function of the metal and its threshold cutoff wavelength . (Use )
Answer
, . Key steps: ; ; .
A photoelectric cell with an unknown cathode material requires a stopping potential of to halt photoelectrons ejected by ultraviolet light of frequency . Calculate the work function in . (Use )
Answer
. Key steps: ; ; .