Resources

In a university mechanics laboratory, a student measures the acceleration aa of an air-track glider using a double-flag photogate system. The photogate flags have width w=(1.500±0.005) cmw = (1.500 \pm 0.005)\text{ cm} and are spaced a center-to-center distance D=(40.00±0.05) cmD = (40.00 \pm 0.05)\text{ cm} apart. The digital timer records the transit time through the first gate as t1=(30.00±0.15) mst_1 = (30.00 \pm 0.15)\text{ ms} and through the second gate as t2=(18.75±0.12) mst_2 = (18.75 \pm 0.12)\text{ ms}. The initial and final speeds are calculated as v1=wt1v_1 = \frac{w}{t_1} and v2=wt2v_2 = \frac{w}{t_2}, and the acceleration is computed using the kinematic relation v22−v12=2aDv_2^2 - v_1^2 = 2 a D, so that a=w22D(1t22−1t12)a = \frac{w^2}{2D}\left(\frac{1}{t_2^2} - \frac{1}{t_1^2}\right). Using error propagation, compute: (a) the speeds v1v_1 and v2v_2 with their uncertainties δv1\delta v_1 and δv2\delta v_2, (b) the acceleration aa in m/s2\text{m/s}^2, and (c) the absolute uncertainty δa\delta a in m/s2\text{m/s}^2.

Answer and steps

Final answer

(a) v1=(0.5000±0.0031) m/sv_1 = (0.5000 \pm 0.0031)\text{ m/s}, v2=(0.8000±0.0058) m/sv_2 = (0.8000 \pm 0.0058)\text{ m/s}; (b) a=0.4875 m/s2a = 0.4875\text{ m/s}^2; (c) δa=0.012 m/s2\delta a = 0.012\text{ m/s}^2, reported as a±δa=(0.488±0.012) m/s2a \pm \delta a = (0.488 \pm 0.012)\text{ m/s}^2

Steps

Part (a): Speeds v1v_1 and v2v_2 with Their Uncertainties

  1. Calculate the speeds: Convert all measurements to SI units:

    • Flag width: w=1.500 cm=0.01500 mw = 1.500\text{ cm} = 0.01500\text{ m}, with δw=0.005 cm=0.00005 m\delta w = 0.005\text{ cm} = 0.00005\text{ m}
    • Transit times: t1=30.00 ms=0.03000 s,δt1=0.15 ms=0.00015 st_1 = 30.00\text{ ms} = 0.03000\text{ s}, \quad \delta t_1 = 0.15\text{ ms} = 0.00015\text{ s} t2=18.75 ms=0.01875 s,δt2=0.12 ms=0.00012 st_2 = 18.75\text{ ms} = 0.01875\text{ s}, \quad \delta t_2 = 0.12\text{ ms} = 0.00012\text{ s}

    The speeds at the two gates are: v1=wt1=0.01500 m0.03000 s=0.5000 m/sv_1 = \frac{w}{t_1} = \frac{0.01500\text{ m}}{0.03000\text{ s}} = 0.5000\text{ m/s} v2=wt2=0.01500 m0.01875 s=0.8000 m/sv_2 = \frac{w}{t_2} = \frac{0.01500\text{ m}}{0.01875\text{ s}} = 0.8000\text{ m/s}

  2. Propagate uncertainties for independent variables in a quotient: For a quantity v=wtv = \frac{w}{t}, the relative uncertainty in quadrature is: δvv=(δww)2+(δtt)2\frac{\delta v}{v} = \sqrt{\left(\frac{\delta w}{w}\right)^2 + \left(\frac{\delta t}{t}\right)^2}

    • For v1v_1: δww=0.0051.500≈3.333×10−3\frac{\delta w}{w} = \frac{0.005}{1.500} \approx 3.333 \times 10^{-3} δt1t1=0.1530.00=5.000×10−3\frac{\delta t_1}{t_1} = \frac{0.15}{30.00} = 5.000 \times 10^{-3} δv1v1=(3.333×10−3)2+(5.000×10−3)2≈6.009×10−3\frac{\delta v_1}{v_1} = \sqrt{(3.333 \times 10^{-3})^2 + (5.000 \times 10^{-3})^2} \approx 6.009 \times 10^{-3} δv1=v1×6.009×10−3≈0.0031 m/s\delta v_1 = v_1 \times 6.009 \times 10^{-3} \approx 0.0031\text{ m/s} v1=(0.5000±0.0031) m/sv_1 = (0.5000 \pm 0.0031)\text{ m/s}
    • For v2v_2: δt2t2=0.1218.75=6.400×10−3\frac{\delta t_2}{t_2} = \frac{0.12}{18.75} = 6.400 \times 10^{-3} δv2v2=(3.333×10−3)2+(6.400×10−3)2≈7.216×10−3\frac{\delta v_2}{v_2} = \sqrt{(3.333 \times 10^{-3})^2 + (6.400 \times 10^{-3})^2} \approx 7.216 \times 10^{-3} δv2=v2×7.216×10−3≈0.0058 m/s\delta v_2 = v_2 \times 7.216 \times 10^{-3} \approx 0.0058\text{ m/s} v2=(0.8000±0.0058) m/sv_2 = (0.8000 \pm 0.0058)\text{ m/s}

Part (b): Acceleration aa

The distance between the photogates is: D=40.00 cm=0.4000 m,δD=0.05 cm=0.0005 mD = 40.00\text{ cm} = 0.4000\text{ m}, \quad \delta D = 0.05\text{ cm} = 0.0005\text{ m}

Using the kinematic relation v22−v12=2aDv_2^2 - v_1^2 = 2aD: a=v22−v122D=(0.8000 m/s)2−(0.5000 m/s)22(0.4000 m)a = \frac{v_2^2 - v_1^2}{2D} = \frac{(0.8000\text{ m/s})^2 - (0.5000\text{ m/s})^2}{2(0.4000\text{ m})} a=0.6400−0.25000.8000=0.39000.8000=0.4875 m/s2a = \frac{0.6400 - 0.2500}{0.8000} = \frac{0.3900}{0.8000} = 0.4875\text{ m/s}^2


Part (c): Absolute Uncertainty δa\delta a

  1. Uncertainty in the squared velocity terms: For each squared speed, δ(v2)=2v δv\delta(v^2) = 2v\,\delta v: δ(v12)=2(0.5000)(0.0031)=0.0031 m2/s2\delta(v_1^2) = 2(0.5000)(0.0031) = 0.0031\text{ m}^2/\text{s}^2 δ(v22)=2(0.8000)(0.0058)=0.00928 m2/s2\delta(v_2^2) = 2(0.8000)(0.0058) = 0.00928\text{ m}^2/\text{s}^2
  2. Uncertainty in the difference (Δv2=v22−v12)(\Delta v^2 = v_2^2 - v_1^2): δ(Δv2)=[δ(v12)]2+[δ(v22)]2=(0.0031)2+(0.00928)2≈0.00978 m2/s2\delta(\Delta v^2) = \sqrt{[\delta(v_1^2)]^2 + [\delta(v_2^2)]^2} = \sqrt{(0.0031)^2 + (0.00928)^2} \approx 0.00978\text{ m}^2/\text{s}^2
  3. Uncertainty in acceleration aa: Since a=Δv22Da = \frac{\Delta v^2}{2D}, the fractional uncertainty is given by: δaa=(δ(Δv2)Δv2)2+(δDD)2\frac{\delta a}{a} = \sqrt{\left(\frac{\delta(\Delta v^2)}{\Delta v^2}\right)^2 + \left(\frac{\delta D}{D}\right)^2} δ(Δv2)Δv2=0.009780.3900≈0.02508\frac{\delta(\Delta v^2)}{\Delta v^2} = \frac{0.00978}{0.3900} \approx 0.02508 δDD=0.00050.4000=0.00125\frac{\delta D}{D} = \frac{0.0005}{0.4000} = 0.00125 δaa=(0.02508)2+(0.00125)2≈0.02511\frac{\delta a}{a} = \sqrt{(0.02508)^2 + (0.00125)^2} \approx 0.02511 δa=a×0.02511=0.4875×0.02511≈0.012 m/s2\delta a = a \times 0.02511 = 0.4875 \times 0.02511 \approx 0.012\text{ m/s}^2

Rounding to consistent significant figures gives: a±δa=(0.488±0.012) m/s2a \pm \delta a = (0.488 \pm 0.012)\text{ m/s}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student linearly adds absolute or relative fractional uncertainties instead of adding independent errors in quadrature.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1=0.015000.03000=0.5000 m/s  ⟹  v2=0.015000.01875=0.8000 m/sv_1 = \frac{0.01500}{0.03000} = 0.5000\text{ m/s} \implies v_2 = \frac{0.01500}{0.01875} = 0.8000\text{ m/s}

  2. Step 2

    δv1v1=δww+δt1t1=0.00833  ⟹  δv1=0.0042 m/s  ⟹  δv2v2=δww+δt2t2=0.00973  ⟹  δv2=0.0078 m/s\frac{\delta v_1}{v_1} = \frac{\delta w}{w} + \frac{\delta t_1}{t_1} = 0.00833 \implies \delta v_1 = 0.0042\text{ m/s} \implies \frac{\delta v_2}{v_2} = \frac{\delta w}{w} + \frac{\delta t_2}{t_2} = 0.00973 \implies \delta v_2 = 0.0078\text{ m/s}

    Correct

    δv1v1=(δww)2+(δt1t1)2≈0.006009  ⟹  δv1≈0.0031 m/s;δv2v2=(δww)2+(δt2t2)2≈0.007216  ⟹  δv2≈0.0058 m/s\frac{\delta v_1}{v_1} = \sqrt{\left(\frac{\delta w}{w}\right)^2 + \left(\frac{\delta t_1}{t_1}\right)^2} \approx 0.006009 \implies \delta v_1 \approx 0.0031\text{ m/s}; \quad \frac{\delta v_2}{v_2} = \sqrt{\left(\frac{\delta w}{w}\right)^2 + \left(\frac{\delta t_2}{t_2}\right)^2} \approx 0.007216 \implies \delta v_2 \approx 0.0058\text{ m/s}

    Because ww and tt are independent random measurements, their relative uncertainties must be combined in quadrature (root-sum-square), not added linearly.

  3. Step 3

    a=0.80002−0.500022×0.4000=0.6400−0.25000.8000=0.4875 m/s2a = \frac{0.8000^2 - 0.5000^2}{2 \times 0.4000} = \frac{0.6400 - 0.2500}{0.8000} = 0.4875\text{ m/s}^2

  4. Step 4

    δu=δ(1t22)+δ(1t12)=47.52 s−2  ⟹  δKK=2(δww)+δDD=0.00792  ⟹  δaa=δKK+δuu=0.03534  ⟹  δa=0.017 m/s2\delta u = \delta\left(\frac{1}{t_2^2}\right) + \delta\left(\frac{1}{t_1^2}\right) = 47.52\text{ s}^{-2} \implies \frac{\delta K}{K} = 2\left(\frac{\delta w}{w}\right) + \frac{\delta D}{D} = 0.00792 \implies \frac{\delta a}{a} = \frac{\delta K}{K} + \frac{\delta u}{u} = 0.03534 \implies \delta a = 0.017\text{ m/s}^2

    Correct

    δ(Δv2)=[2v1δv1]2+[2v2δv2]2≈0.00978 m2/s2  ⟹  δaa=(δ(Δv2)Δv2)2+(δDD)2≈0.02511  ⟹  δa≈0.012 m/s2\delta(\Delta v^2) = \sqrt{[2v_1\delta v_1]^2 + [2v_2\delta v_2]^2} \approx 0.00978\text{ m}^2/\text{s}^2 \implies \frac{\delta a}{a} = \sqrt{\left(\frac{\delta(\Delta v^2)}{\Delta v^2}\right)^2 + \left(\frac{\delta D}{D}\right)^2} \approx 0.02511 \implies \delta a \approx 0.012\text{ m/s}^2

    You calculated the individual derivatives accurately, but you repeatedly summed independent uncertainties linearly rather than in quadrature, leading to an overestimation of δa\delta a.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted all values into consistent SI units before computing.

You calculated the central values of v1v_1, v2v_2, and aa with complete arithmetic precision.

You correctly computed the partial derivatives for power functions such as δ(t−2)=2t−3δt\delta(t^{-2}) = 2t^{-3}\delta t.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear error addition instead of quadrature

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the worst-case (upper-bound) rule of linear addition δz=δx+δy\delta z = \delta x + \delta y and δzz=δxx+δyy\frac{\delta z}{z} = \frac{\delta x}{x} + \frac{\delta y}{y} rather than standard Gaussian error propagation in quadrature δz=(δx)2+(δy)2\delta z = \sqrt{(\delta x)^2 + (\delta y)^2} for independent random variables.

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadrature for Independent Uncertainties
  • For independent random variables, combine fractional uncertainties in products/quotients as δqq=∑(niδxixi)2\frac{\delta q}{q} = \sqrt{\sum \left(n_i \frac{\delta x_i}{x_i}\right)^2}, and absolute uncertainties in sums/differences as δq=∑(δxi)2\delta q = \sqrt{\sum (\delta x_i)^2}.

  • Always apply the root-sum-square (Pythagorean addition) unless uncertainties are explicitly specified as fully correlated or worst-case bounds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the uncertainty in the squared speeds: δ(v12)=2v1δv1=2(0.5000)(0.0031)=0.0031 m2/s2\delta(v_1^2) = 2 v_1 \delta v_1 = 2(0.5000)(0.0031) = 0.0031\text{ m}^2/\text{s}^2, and δ(v22)=2v2δv2=2(0.8000)(0.0058)=0.00928 m2/s2\delta(v_2^2) = 2 v_2 \delta v_2 = 2(0.8000)(0.0058) = 0.00928\text{ m}^2/\text{s}^2.

  2. Combine the squared speed uncertainties in quadrature: δ(v22−v12)=(0.0031)2+(0.00928)2≈0.00978 m2/s2\delta(v_2^2 - v_1^2) = \sqrt{(0.0031)^2 + (0.00928)^2} \approx 0.00978\text{ m}^2/\text{s}^2.

  3. Combine the numerator and denominator fractional uncertainties in quadrature: δaa=(0.009780.3900)2+(0.00050.4000)2=(0.02508)2+(0.00125)2≈0.02511\frac{\delta a}{a} = \sqrt{\left(\frac{0.00978}{0.3900}\right)^2 + \left(\frac{0.0005}{0.4000}\right)^2} = \sqrt{(0.02508)^2 + (0.00125)^2} \approx 0.02511.

  4. Multiply by aa: δa=0.4875×0.02511≈0.012 m/s2\delta a = 0.4875 \times 0.02511 \approx 0.012\text{ m/s}^2.

Final answer

a±δa=(0.488±0.012) m/s2a \pm \delta a = (0.488 \pm 0.012)\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between worst-case bounds (linear sum) and random Gaussian uncertainties (quadrature sum).

  • Practice using the general partial-derivative formula δf=∑(∂f∂xiδxi)2\delta f = \sqrt{\sum \left(\frac{\partial f}{\partial x_i} \delta x_i\right)^2} on multivariable expressions.

OverviewACEpath Teacher's Diagnosis

02 The student treats v₁ and v₂ as independent variables in a = (v₂² - v₁²)/(2D), ignoring their shared dependence on the flag width w.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1=0.015000.03000=0.5000 m/sv_1 = \frac{0.01500}{0.03000} = 0.5000\text{ m/s}, δv1v1=(0.0051.500)2+(0.1530.00)2=0.006009  ⟹  δv1=0.0030 m/s\frac{\delta v_1}{v_1} = \sqrt{\left(\frac{0.005}{1.500}\right)^2 + \left(\frac{0.15}{30.00}\right)^2} = 0.006009 \implies \delta v_1 = 0.0030\text{ m/s}, v2=0.015000.01875=0.8000 m/sv_2 = \frac{0.01500}{0.01875} = 0.8000\text{ m/s}, δv2v2=(0.0051.500)2+(0.1218.75)2=0.007216  ⟹  δv2=0.0058 m/s\frac{\delta v_2}{v_2} = \sqrt{\left(\frac{0.005}{1.500}\right)^2 + \left(\frac{0.12}{18.75}\right)^2} = 0.007216 \implies \delta v_2 = 0.0058\text{ m/s}

  2. Step 2

    a=0.80002−0.500022×0.4000=0.6400−0.25000.8000=0.4875 m/s2a = \frac{0.8000^2 - 0.5000^2}{2 \times 0.4000} = \frac{0.6400 - 0.2500}{0.8000} = 0.4875\text{ m/s}^2

  3. Step 3

    δ(v12)=2v1 δv1=0.0030 m2/s2\delta(v_1^2) = 2v_1\,\delta v_1 = 0.0030\text{ m}^2/\text{s}^2, δ(v22)=2v2 δv2=0.00928 m2/s2  ⟹  δ(v22−v12)=0.009282+0.00302=0.00975 m2/s2\delta(v_2^2) = 2v_2\,\delta v_2 = 0.00928\text{ m}^2/\text{s}^2 \implies \delta(v_2^2 - v_1^2) = \sqrt{0.00928^2 + 0.0030^2} = 0.00975\text{ m}^2/\text{s}^2

    Correct

    a=w22D(1t22−1t12)  ⟹  (δaa)2=(2δww)2+(δDD)2+(δ(Δt−2)Δt−2)2a = \frac{w^2}{2D}\left(\frac{1}{t_2^2} - \frac{1}{t_1^2}\right) \implies \left(\frac{\delta a}{a}\right)^2 = \left(2\frac{\delta w}{w}\right)^2 + \left(\frac{\delta D}{D}\right)^2 + \left(\frac{\delta(\Delta t^{-2})}{\Delta t^{-2}}\right)^2

    You added the uncertainties of v12v_1^2 and v22v_2^2 in quadrature, assuming they were independent. However, because v1=w/t1v_1 = w/t_1 and v2=w/t2v_2 = w/t_2 share the exact same measurement of flag width ww, their uncertainties are correlated. Combining them in quadrature without a covariance term artificially counts δw\delta w twice as independent random fluctuations.

  4. Step 4

    δaa=0.025002+0.001252=0.02503  ⟹  δa=0.4875×0.02503=0.012 m/s2\frac{\delta a}{a} = \sqrt{0.02500^2 + 0.00125^2} = 0.02503 \implies \delta a = 0.4875 \times 0.02503 = 0.012\text{ m/s}^2

    Correct

    δaa=(2×0.0051.500)2+(0.0540.00)2+(0.02196)2≈0.0230  ⟹  δa=0.4875×0.02298≈0.011 m/s2\frac{\delta a}{a} = \sqrt{\left(2\times\frac{0.005}{1.500}\right)^2 + \left(\frac{0.05}{40.00}\right)^2 + (0.02196)^2} \approx 0.0230 \implies \delta a = 0.4875 \times 0.02298 \approx 0.011\text{ m/s}^2

    Because the numerator uncertainty was calculated assuming independence between v1v_1 and v2v_2, the final value of δa\delta a is affected by that earlier correlation error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the gate speeds and their uncertainties using standard quotient propagation.

You correctly applied the kinematic equation to compute the glider acceleration.

You maintained clear, orderly layout and correct unit conversions throughout your calculations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Correlated intermediate variables in error propagation

You combined v12v_1^2 and v22v_2^2 in quadrature as if they were independent, rather than expressing the acceleration formula directly in terms of the independent primary measurements.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A fundamental prerequisite for adding uncertainties in quadrature is that the variables must be statistically independent. When two intermediate variables share a common measured parameter (here, the flag width ww), they co-vary. Propagating through intermediate correlated quantities double-counts the shared parameter's uncertainty unless explicit covariance is included.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Variable Independence
  • Quadrature addition δ(A±B)=(δA)2+(δB)2\delta(A \pm B) = \sqrt{(\delta A)^2 + (\delta B)^2} applies only if AA and BB are completely independent measurements.

  • Inspect whether AA and BB contain any shared base variables before combining them in quadrature.

Return to Primary Measurements
  • When intermediate quantities share a common measurement, express the final formula in terms of base independent variables: a=w22D(t2−2−t1−2)a = \frac{w^2}{2D}\left(t_2^{-2} - t_1^{-2}\right).

  • Factor out common terms and propagate uncertainties directly from the uncorrelated inputs ww, DD, t1t_1, and t2t_2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express aa directly in terms of independent inputs: a=w22DXa = \frac{w^2}{2D} X, where X=t2−2−t1−2X = t_2^{-2} - t_1^{-2}.

  2. Calculate X=(0.01875 s)−2−(0.03000 s)−2=2844.44 s−2−1111.11 s−2=1733.33 s−2X = (0.01875\text{ s})^{-2} - (0.03000\text{ s})^{-2} = 2844.44\text{ s}^{-2} - 1111.11\text{ s}^{-2} = 1733.33\text{ s}^{-2}.

  3. Find δX=(−2t2−3 δt2)2+(2t1−3 δt1)2=36.412+11.112≈38.07 s−2\delta X = \sqrt{(-2t_2^{-3}\,\delta t_2)^2 + (2t_1^{-3}\,\delta t_1)^2} = \sqrt{36.41^2 + 11.11^2} \approx 38.07\text{ s}^{-2}, giving relative uncertainty δXX≈0.02196\frac{\delta X}{X} \approx 0.02196.

  4. Propagate to aa: δaa=(2δww)2+(δDD)2+(δXX)2=(0.00667)2+(0.00125)2+(0.02196)2≈0.0230\frac{\delta a}{a} = \sqrt{\left(2\frac{\delta w}{w}\right)^2 + \left(\frac{\delta D}{D}\right)^2 + \left(\frac{\delta X}{X}\right)^2} = \sqrt{(0.00667)^2 + (0.00125)^2 + (0.02196)^2} \approx 0.0230.

  5. Compute δa=0.4875 m/s2×0.0230≈0.011 m/s2\delta a = 0.4875\text{ m/s}^2 \times 0.0230 \approx 0.011\text{ m/s}^2.

Final answer

a±δa=(0.488±0.011) m/s2a \pm \delta a = (0.488 \pm 0.011)\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the mathematical requirement of independence when using sum and product quadrature formulas.

  • Practice rewriting kinematic and dynamic relations in terms of directly measured laboratory quantities before setting up error propagation.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to multiply the relative uncertainty of w by the power exponent 2 when propagating errors for w².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1=0.015000.03000=0.5000 m/s  ⟹  δv1v1=(0.0051.500)2+(0.1530.00)2=0.006009  ⟹  δv1=0.0030 m/sv_1 = \frac{0.01500}{0.03000} = 0.5000\text{ m/s} \implies \frac{\delta v_1}{v_1} = \sqrt{\left(\frac{0.005}{1.500}\right)^2 + \left(\frac{0.15}{30.00}\right)^2} = 0.006009 \implies \delta v_1 = 0.0030\text{ m/s}; v2=0.015000.01875=0.8000 m/s  ⟹  δv2v2=(0.0051.500)2+(0.1218.75)2=0.007216  ⟹  δv2=0.0058 m/sv_2 = \frac{0.01500}{0.01875} = 0.8000\text{ m/s} \implies \frac{\delta v_2}{v_2} = \sqrt{\left(\frac{0.005}{1.500}\right)^2 + \left(\frac{0.12}{18.75}\right)^2} = 0.007216 \implies \delta v_2 = 0.0058\text{ m/s}

  2. Step 2

    a=0.80002−0.500022×0.4000=0.6400−0.25000.8000=0.4875 m/s2a = \frac{0.8000^2 - 0.5000^2}{2 \times 0.4000} = \frac{0.6400 - 0.2500}{0.8000} = 0.4875\text{ m/s}^2

  3. Step 3

    δ(1t22)=2δt2t23=36.41 s−2  ⟹  δ(1t12)=2δt1t13=11.11 s−2  ⟹  δu=36.412+11.112=38.07 s−2  ⟹  δuu=0.02196\delta\left(\frac{1}{t_2^2}\right) = \frac{2\delta t_2}{t_2^3} = 36.41\text{ s}^{-2} \implies \delta\left(\frac{1}{t_1^2}\right) = \frac{2\delta t_1}{t_1^3} = 11.11\text{ s}^{-2} \implies \delta u = \sqrt{36.41^2 + 11.11^2} = 38.07\text{ s}^{-2} \implies \frac{\delta u}{u} = 0.02196

  4. Step 4

    δKK=(δww)2+(δDD)2=0.0033332+0.0012502=0.003560\frac{\delta K}{K} = \sqrt{\left(\frac{\delta w}{w}\right)^2 + \left(\frac{\delta D}{D}\right)^2} = \sqrt{0.003333^2 + 0.001250^2} = 0.003560

    Correct

    δKK=(2δww)2+(δDD)2=(2×0.003333)2+0.0012502≈0.006783\frac{\delta K}{K} = \sqrt{\left(2\frac{\delta w}{w}\right)^2 + \left(\frac{\delta D}{D}\right)^2} = \sqrt{(2 \times 0.003333)^2 + 0.001250^2} \approx 0.006783

    Because ww is raised to the second power in K=w22DK = \frac{w^2}{2D}, its relative uncertainty must be scaled by the exponent 22, giving 2δww2\frac{\delta w}{w} rather than δww\frac{\delta w}{w}.

  5. Step 5

    δaa=(δKK)2+(δuu)2=0.02225  ⟹  δa=0.4875×0.02225=0.0108 m/s2\frac{\delta a}{a} = \sqrt{\left(\frac{\delta K}{K}\right)^2 + \left(\frac{\delta u}{u}\right)^2} = 0.02225 \implies \delta a = 0.4875 \times 0.02225 = 0.0108\text{ m/s}^2

    Correct

    δaa=0.0067832+0.021962≈0.02298  ⟹  δa=0.4875×0.02298≈0.0112 m/s2≈0.011 m/s2\frac{\delta a}{a} = \sqrt{0.006783^2 + 0.02196^2} \approx 0.02298 \implies \delta a = 0.4875 \times 0.02298 \approx 0.0112\text{ m/s}^2 \approx 0.011\text{ m/s}^2

    Your combination in quadrature was procedurally sound, but the numerical result was affected by the missing factor of 22 in Step 4.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted all quantities accurately to SI units before calculating speeds and acceleration.

You correctly used quadrature for quotients when calculating δv1\delta v_1 and δv2\delta v_2.

You used derivative-based error propagation appropriately on the nonlinear terms 1t2\frac{1}{t^2}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Power Rule in Relative Uncertainty

You treated w2w^2 as having a relative uncertainty of δww\frac{\delta w}{w} instead of 2δww2\frac{\delta w}{w}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the power rule for independent variables (q=xn  ⟹  δq∣q∣=∣n∣δx∣x∣q = x^n \implies \frac{\delta q}{|q|} = |n|\frac{\delta x}{|x|}) when propagating errors through combined algebraic expressions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Powers in Relative Uncertainty
  • For a term xnx^n, the relative uncertainty is ∣n∣δx∣x∣|n|\frac{\delta x}{|x|}, because xnx^n is fully correlated with itself.

  • Always multiply the fractional uncertainty of a variable by its exponent before squaring and adding in quadrature.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the exponent 22 for the flag width: δ(w2)w2=2δww=2×0.0051.500≈0.006667\frac{\delta(w^2)}{w^2} = 2\frac{\delta w}{w} = 2 \times \frac{0.005}{1.500} \approx 0.006667.

  2. Compute δKK=(0.006667)2+(0.0540.00)2=(0.006667)2+(0.001250)2≈0.006783\frac{\delta K}{K} = \sqrt{(0.006667)^2 + \left(\frac{0.05}{40.00}\right)^2} = \sqrt{(0.006667)^2 + (0.001250)^2} \approx 0.006783.

  3. Combine with δuu=0.02196\frac{\delta u}{u} = 0.02196: δaa=(0.006783)2+(0.02196)2≈0.02298\frac{\delta a}{a} = \sqrt{(0.006783)^2 + (0.02196)^2} \approx 0.02298.

  4. Multiply by a=0.4875 m/s2a = 0.4875\text{ m/s}^2 to get δa=0.4875×0.02298≈0.0112 m/s2\delta a = 0.4875 \times 0.02298 \approx 0.0112\text{ m/s}^2.

Final answer

δa≈0.011 m/s2\delta a \approx 0.011\text{ m/s}^2 (or 0.012 m/s20.012\text{ m/s}^2 depending on intermediate rounding)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the power rule for uncertainties: whenever an independent variable is raised to power nn, its fractional uncertainty is multiplied by ∣n∣|n|.

  • Before adding fractional uncertainties in quadrature, scan every factor in the formula and verify that all exponents have been attached as multiplicative coefficients.

Lock it in

Similar question

01

A photogate flag of length L=(2.000±0.006) cmL = (2.000 \pm 0.006)\text{ cm} passes through a photogate in time t=(40.0±0.4) mst = (40.0 \pm 0.4)\text{ ms}. Calculate the speed v=L/tv = L/t and its absolute uncertainty δv\delta v in m/s\text{m/s}.

Answer

v=0.500 m/sv = 0.500\text{ m/s}, δv=0.005 m/s\delta v = 0.005\text{ m/s}. Key steps: δLL=0.0062.000=0.003\frac{\delta L}{L} = \frac{0.006}{2.000} = 0.003; δtt=0.440.0=0.010\frac{\delta t}{t} = \frac{0.4}{40.0} = 0.010; δvv=0.0032+0.0102=0.000109≈0.01044\frac{\delta v}{v} = \sqrt{0.003^2 + 0.010^2} = \sqrt{0.000109} \approx 0.01044; δv=0.500×0.01044≈0.0052 m/s\delta v = 0.500 \times 0.01044 \approx 0.0052\text{ m/s}.

02

A glider of mass m=(250.0±0.5) gm = (250.0 \pm 0.5)\text{ g} travels at speed v=(0.800±0.008) m/sv = (0.800 \pm 0.008)\text{ m/s}. Find the kinetic energy Ek=12mv2E_k = \frac{1}{2}m v^2 in joules along with its absolute uncertainty δEk\delta E_k.

Answer

Ek=(0.0800±0.0016) JE_k = (0.0800 \pm 0.0016)\text{ J}. Key steps: Ek=12(0.250)(0.8002)=0.0800 JE_k = \frac{1}{2}(0.250)(0.800^2) = 0.0800\text{ J}. Relative uncertainties: δmm=0.5250.0=0.002\frac{\delta m}{m} = \frac{0.5}{250.0} = 0.002; 2δvv=2(0.0080.800)=0.0202\frac{\delta v}{v} = 2\left(\frac{0.008}{0.800}\right) = 0.020. Total fractional uncertainty δEkEk=0.0022+0.0202≈0.0201\frac{\delta E_k}{E_k} = \sqrt{0.002^2 + 0.020^2} \approx 0.0201. Absolute uncertainty δEk=0.0800×0.0201≈0.0016 J\delta E_k = 0.0800 \times 0.0201 \approx 0.0016\text{ J}.

03

In a free-fall lab, the height is h=(1.800±0.004) mh = (1.800 \pm 0.004)\text{ m} and fall time is t=(0.606±0.003) st = (0.606 \pm 0.003)\text{ s}. Using g=2ht2g = \frac{2h}{t^2}, compute the value of gg and its uncertainty δg\delta g in m/s2\text{m/s}^2.

Answer

g=(9.80±0.10) m/s2g = (9.80 \pm 0.10)\text{ m/s}^2. Key steps: g=2(1.800)(0.606)2≈9.803 m/s2g = \frac{2(1.800)}{(0.606)^2} \approx 9.803\text{ m/s}^2. Fractional uncertainties: δhh=0.0041.800≈0.00222\frac{\delta h}{h} = \frac{0.004}{1.800} \approx 0.00222; 2δtt=2(0.0030.606)≈0.009902\frac{\delta t}{t} = 2\left(\frac{0.003}{0.606}\right) \approx 0.00990. In quadrature: δgg=0.002222+0.009902≈0.01015\frac{\delta g}{g} = \sqrt{0.00222^2 + 0.00990^2} \approx 0.01015. Thus δg=9.803×0.01015≈0.10 m/s2\delta g = 9.803 \times 0.01015 \approx 0.10\text{ m/s}^2.

Loading workspace…