Resources

In an ultra-quiet acoustic chamber designed for hearing research, a sensitive microphone detects a faint tone whose sound intensity is measured as I=2.50×10−13 W/m2I = 2.50 \times 10^{-13}\text{ W/m}^2, which is below the canonical human hearing threshold I0=1.00×10−12 W/m2I_0 = 1.00 \times 10^{-12}\text{ W/m}^2. (a) Calculate the sound intensity level β\beta in decibels, explaining the physical meaning of the resulting algebraic sign. (b) Find the theoretical asymptotic limiting decibel level lim⁡I→0+β(I)\lim_{I \to 0^+} \beta(I) as intensity approaches absolute silence.

Answer and steps

Final answer

(a) β=−6.02 dB\beta = -6.02\text{ dB}; the negative sign indicates an intensity strictly below the standardized reference threshold I0I_0, not negative acoustic energy; (b) lim⁡I→0+β(I)=−∞ dB\lim_{I \to 0^+} \beta(I) = -\infty\text{ dB}

Steps

Part (a): Calculating Sound Intensity Level and Interpreting the Sign

  1. Definition of Sound Intensity Level
    The sound intensity level β\beta, measured in decibels (dB\text{dB}), is defined on a logarithmic scale relative to the standardized reference threshold of human hearing I0=1.00×10−12 W/m2I_0 = 1.00 \times 10^{-12}\text{ W/m}^2: β=10log⁡10(II0)\beta = 10 \log_{10}\left(\frac{I}{I_0}\right)
  2. Calculating the Intensity Ratio
    Substitute the given measured intensity I=2.50×10−13 W/m2I = 2.50 \times 10^{-13}\text{ W/m}^2 and reference intensity I0I_0: II0=2.50×10−13 W/m21.00×10−12 W/m2=0.250=14\frac{I}{I_0} = \frac{2.50 \times 10^{-13}\text{ W/m}^2}{1.00 \times 10^{-12}\text{ W/m}^2} = 0.250 = \frac{1}{4}
  3. Evaluating the Decibel Level
    Using logarithmic properties log⁡10(0.25)=log⁡10(2−2)=−2log⁡10(2)\log_{10}(0.25) = \log_{10}(2^{-2}) = -2\log_{10}(2): β=10log⁡10(0.250)=10(−0.60206)≈−6.02 dB\beta = 10 \log_{10}(0.250) = 10(-0.60206) \approx -6.02\text{ dB}
  4. Physical Meaning of the Negative Sign

    • The decibel scale is a relative scale, not an absolute measure of physical energy.
    • A value of 0 dB0\text{ dB} corresponds to I=I0I = I_0.
    • Since log⁡10(x)<0\log_{10}(x) < 0 whenever 0<x<10 < x < 1, any sound intensity smaller than the reference threshold (I<I0I < I_0) produces a negative decibel value.
    • Therefore, the negative sign indicates that the sound is fainter than the canonical threshold of human hearing; it does not signify negative acoustic energy or negative wave power, both of which must be strictly positive.

Part (b): Asymptotic Limit as Intensity Approaches Absolute Silence

  1. Applying the Limit to the Logarithmic Definition
    As acoustic intensity II approaches complete silence (I→0+I \to 0^+): lim⁡I→0+β(I)=lim⁡I→0+10log⁡10(II0)\lim_{I \to 0^+} \beta(I) = \lim_{I \to 0^+} 10 \log_{10}\left(\frac{I}{I_0}\right)
  2. Evaluating the Logarithmic Limit
    As the argument of the logarithm approaches zero from the positive side, the base-10 logarithm diverges to negative infinity: lim⁡u→0+log⁡10(u)=−∞\lim_{u \to 0^+} \log_{10}(u) = -\infty Therefore: lim⁡I→0+β(I)=−∞ dB\lim_{I \to 0^+} \beta(I) = -\infty\text{ dB}

    Common Pitfall: Students often assume that absolute silence corresponds to 0 dB0\text{ dB}. However, 0 dB0\text{ dB} corresponds to I=I0=1.00×10−12 W/m2I = I_0 = 1.00 \times 10^{-12}\text{ W/m}^2, while true physical silence (I=0 W/m2I = 0\text{ W/m}^2) corresponds asymptotically to −∞ dB-\infty\text{ dB}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio inside the logarithm as I₀/I, incorrectly yielding a positive decibel level and concluding the intensity exceeds the hearing threshold.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    β=10log⁡10(I0I)  ⟹  β=10log⁡10(1.00×10−122.50×10−13)  ⟹  β=10log⁡10(4.00)=6.02 dB\beta = 10 \log_{10}\left(\frac{I_0}{I}\right) \implies \beta = 10 \log_{10}\left(\frac{1.00 \times 10^{-12}}{2.50 \times 10^{-13}}\right) \implies \beta = 10 \log_{10}(4.00) = 6.02\text{ dB}

    Correct

    β=10log⁡10(II0)=10log⁡10(2.50×10−131.00×10−12)=10log⁡10(0.250)=−6.02 dB\beta = 10 \log_{10}\left(\frac{I}{I_0}\right) = 10 \log_{10}\left(\frac{2.50 \times 10^{-13}}{1.00 \times 10^{-12}}\right) = 10 \log_{10}(0.250) = -6.02\text{ dB}

    The standard sound intensity level defines the measured intensity II in the numerator and the reference threshold I0I_0 in the denominator. Inverting them changed the ratio from 0.2500.250 to 4.004.00, yielding +6.02 dB+6.02\text{ dB} instead of −6.02 dB-6.02\text{ dB}.

  2. Step 2

    The positive sign means the sound is louder than the threshold of hearing.

    Correct

    The negative sign indicates that the sound intensity is strictly below the standardized reference threshold of hearing (I<I0I < I_0), not that acoustic energy is negative.

    Because the inverted formula produced a positive value, your interpretation followed that incorrect sign. For the correct value of −6.02 dB-6.02\text{ dB}, the negative sign indicates a sub-threshold sound fainter than I0I_0.

  3. Step 3

    lim⁡I→0+10log⁡10(I0I)=+∞ dB\lim_{I \to 0^+} 10 \log_{10}\left(\frac{I_0}{I}\right) = +\infty\text{ dB}

    Correct

    lim⁡I→0+10log⁡10(II0)=−∞ dB\lim_{I \to 0^+} 10 \log_{10}\left(\frac{I}{I_0}\right) = -\infty\text{ dB}

    Your limit calculation followed consistently from your inverted formula, but because the correct ratio is I/I0I / I_0, the argument approaches 0+0^+ as I→0+I \to 0^+, meaning the limit diverges to −∞ dB-\infty\text{ dB}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the base-10 logarithm and multiplied by 10 to obtain 6.026.02.

You correctly recognized that a decibel sign compares a sound to the threshold of hearing.

You correctly evaluated the mathematical limit of your written logarithmic expression as the denominator approaches zero.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Inversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defined sound intensity level as 10log⁡10(I0/I)10\log_{10}(I_0 / I) instead of comparing the measured sound relative to the reference threshold via 10log⁡10(I/I0)10\log_{10}(I / I_0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Decibel Level Ratio Structure
  • Sound intensity level is always defined with the measured sound in the numerator: β=10log⁡10(I/I0)\beta = 10 \log_{10}(I / I_0).

  • Always verify that the measured intensity II sits on top and the fixed reference I0=10−12 W/m2I_0 = 10^{-12}\text{ W/m}^2 sits on the bottom before computing.

Sign Sanity Check
  • If I>I0I > I_0, then β>0 dB\beta > 0\text{ dB}; if I=I0I = I_0, then β=0 dB\beta = 0\text{ dB}; if I<I0I < I_0, then β<0 dB\beta < 0\text{ dB}.

  • Compare the given II with 10−12 W/m210^{-12}\text{ W/m}^2 before starting; since 2.50×10−13<10−122.50 \times 10^{-13} < 10^{-12}, your final β\beta must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard sound intensity level formula: β=10log⁡10(II0)\beta = 10 \log_{10}\left(\frac{I}{I_0}\right).

  2. Substitute I=2.50×10−13 W/m2I = 2.50 \times 10^{-13}\text{ W/m}^2 and I0=1.00×10−12 W/m2I_0 = 1.00 \times 10^{-12}\text{ W/m}^2 to find the ratio: II0=0.250\frac{I}{I_0} = 0.250.

  3. Calculate β=10log⁡10(0.250)=10(−0.602)=−6.02 dB\beta = 10 \log_{10}(0.250) = 10(-0.602) = -6.02\text{ dB}.

  4. Explain that the negative sign means the sound is fainter than the reference threshold I0I_0.

  5. Take the asymptotic limit: lim⁡I→0+10log⁡10(II0)=10(−∞)=−∞ dB\lim_{I \to 0^+} 10 \log_{10}\left(\frac{I}{I_0}\right) = 10(-\infty) = -\infty\text{ dB}.

Final answer

(a) β=−6.02 dB\beta = -6.02\text{ dB}; the negative sign indicates an intensity below the reference threshold I0I_0; (b) lim⁡I→0+β(I)=−∞ dB\lim_{I \to 0^+} \beta(I) = -\infty\text{ dB}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic 'Input over Reference' (I/I0I / I_0) for logarithmic level scales like decibels.

  • Perform a sign sanity check whenever a measured value is below 10−12 W/m210^{-12}\text{ W/m}^2 to confirm your result is negative.

  • Practice evaluating limits of logarithmic functions as the argument approaches zero from the right.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 10 in the sound intensity level formula, computing the level in bels instead of decibels.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    β=log⁡10(II0)  ⟹  β=log⁡10(2.50×10−131.00×10−12)  ⟹  β=log⁡10(0.250)=−0.602 dB\beta = \log_{10}\left(\frac{I}{I_0}\right) \implies \beta = \log_{10}\left(\frac{2.50 \times 10^{-13}}{1.00 \times 10^{-12}}\right) \implies \beta = \log_{10}(0.250) = -0.602\text{ dB}

    Correct

    β=10log⁡10(II0)=10log⁡10(0.250)≈−6.02 dB\beta = 10\log_{10}\left(\frac{I}{I_0}\right) = 10\log_{10}(0.250) \approx -6.02\text{ dB}

    You omitted the multiplier of 1010 in the decibel formula. The formula log⁡10(I/I0)\log_{10}(I/I_0) gives the intensity level in bels (B\text{B}); multiplying by 1010 converts the value into decibels (dB\text{dB}).

  2. Step 2

    The negative sign means the intensity is below the standard threshold of hearing.

  3. Step 3

    lim⁡I→0+log⁡10(II0)=−∞ dB\lim_{I \to 0^+} \log_{10}\left(\frac{I}{I_0}\right) = -\infty\text{ dB}

    Correct

    lim⁡I→0+β(I)=lim⁡I→0+10log⁡10(II0)=−∞ dB\lim_{I \to 0^+} \beta(I) = \lim_{I \to 0^+} 10\log_{10}\left(\frac{I}{I_0}\right) = -\infty\text{ dB}

    Your limit calculation correctly arrives at −∞ dB-\infty\text{ dB}, though it carries over the missing factor of 1010 from your initial formula definition.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the ratio of measured intensity to the standard reference threshold.

You evaluated the base-10 logarithm with correct arithmetic.

You correctly interpreted the physical significance of a negative decibel level.

You correctly recognized that the asymptotic limit as intensity approaches zero is −∞-\infty rather than 00.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted decibel prefactor (dB vs. Bel)

You wrote log⁡10(I/I0)\log_{10}(I/I_0) instead of 10log⁡10(I/I0)10\log_{10}(I/I_0) when calculating the level in decibels.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the definition of the bel (B=log⁡10(I/I0)\text{B} = \log_{10}(I/I_0)) with the decibel (dB=10log⁡10(I/I0)\text{dB} = 10\log_{10}(I/I_0)). The prefix 'deci-' signifies one-tenth of a bel, meaning there are 10 dB10\text{ dB} per bel.

REASONING PATH
Your ACEpath teacher’s suggested approach
Formula check for decibels
  • Sound intensity level in decibels is β=10log⁡10(I/I0)\beta = 10\log_{10}(I/I_0), not log⁡10(I/I0)\log_{10}(I/I_0).

  • Always verify that the factor of 1010 is included in the formula whenever the requested unit is dB\text{dB}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the definition of sound intensity level: β=10log⁡10(II0)\beta = 10\log_{10}\left(\frac{I}{I_0}\right).

  2. Substitute the intensity ratio: II0=2.50×10−13 W/m21.00×10−12 W/m2=0.250\frac{I}{I_0} = \frac{2.50 \times 10^{-13}\text{ W/m}^2}{1.00 \times 10^{-12}\text{ W/m}^2} = 0.250.

  3. Multiply the base-10 logarithm by 1010: β=10×log⁡10(0.250)=10(−0.60206)≈−6.02 dB\beta = 10 \times \log_{10}(0.250) = 10(-0.60206) \approx -6.02\text{ dB}.

Final answer

(a) β=−6.02 dB\beta = -6.02\text{ dB}; the negative sign indicates an intensity below the reference threshold I0I_0; (b) lim⁡I→0+β(I)=−∞ dB\lim_{I \to 0^+} \beta(I) = -\infty\text{ dB}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check the unit prefix: write down β=10log⁡10(I/I0)\beta = 10\log_{10}(I/I_0) at the start of every decibel problem to avoid omitting the factor of 1010.

  • Practice distinguishing between intensity ratios that yield positive decibels (I>I0I > I_0), zero decibels (I=I0I = I_0), and negative decibels (I<I0I < I_0).

OverviewACEpath Teacher's Diagnosis

03 The student assumes that zero intensity corresponds to 0 dB, confusing absolute silence with the reference threshold level.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    β=10log⁡10(II0)  ⟹  β=10log⁡10(0.250)=−6.02 dB\beta = 10 \log_{10}\left(\frac{I}{I_0}\right) \implies \beta = 10 \log_{10}(0.250) = -6.02\text{ dB}

  2. Step 2

    The negative sign means the sound intensity is fainter than the reference threshold I0I_0.

  3. Step 3

    At complete silence, \text{At complete silence, } I = 0 W/m\text{ W/m}^2   ⟹  \implies $\lim_{I →\to 0^+}$ \beta(I) = 0\text{ dB}_

    Correct

    $\lim_{I →\to 0^+} \beta(I) = \\lim_{I \to 0^+}10log⁡10 10 \log_{10}\left(\frac{I}{I_0}\right)=− = -\infty dB\text{ dB}

    A decibel level of 0 dB0\text{ dB} corresponds to I=I0I = I_0, not I=0 W/m2I = 0\text{ W/m}^2. As the intensity II approaches 0+0^+, the argument of the logarithm approaches zero, which makes log⁡10(I/I0)→−∞\log_{10}(I/I_0) \to -\infty.

WHAT YOU DID WELL
Compliments from Your Teacher

You stated the correct decibel formula for sound intensity level.

You accurately calculated the decibel value of −6.02 dB-6.02\text{ dB}.

You correctly explained that a negative decibel level signifies an intensity below the reference threshold I0I_0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decibel Zero Reference Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the logarithmic reference baseline (0 dB0\text{ dB}, where I=I0I = I_0) with the physical absence of sound energy (I=0 W/m2I = 0\text{ W/m}^2, where β→−∞ dB\beta \to -\infty\text{ dB}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Level vs. True Zero
  • 0 dB0\text{ dB} means I/I0=1  ⟹  I=I0=10−12 W/m2I/I_0 = 1 \implies I = I_0 = 10^{-12}\text{ W/m}^2, not zero intensity.

  • Always evaluate lim⁡x→0+log⁡10(x)=−∞\lim_{x \to 0^+} \log_{10}(x) = -\infty when taking the limit of sound intensity toward complete physical silence.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. As I→0+I \to 0^+, the ratio II0→0+\frac{I}{I_0} \to 0^+.

  2. Recall that lim⁡u→0+log⁡10(u)=−∞\lim_{u \to 0^+} \log_{10}(u) = -\infty.

  3. Therefore, multiplying by 1010 yields 10(−∞)=−∞ dB10(-\infty) = -\infty\text{ dB}.

Final answer

lim⁡I→0+β(I)=−∞ dB\lim_{I \to 0^+} \beta(I) = -\infty\text{ dB}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the behavior of the logarithmic function log⁡10(x)\log_{10}(x) near x=0x = 0 and x=1x = 1.

  • Practice distinguishing between relative logarithmic zeros (0 dB0\text{ dB}) and physical absolute zeros (0 W/m20\text{ W/m}^2).

Lock it in

Similar question

01

A hydrophone detects a low-frequency rumble in quiet deep water with an intensity of I=5.00×10−13 W/m2I = 5.00 \times 10^{-13}\text{ W/m}^2. Using the airborne hearing threshold I0=1.00×10−12 W/m2I_0 = 1.00 \times 10^{-12}\text{ W/m}^2 as a comparative benchmark, calculate the sound intensity level β\beta in decibels.

Answer

β=10log⁡10(5.00×10−131.00×10−12)=10log⁡10(0.500)≈10(−0.301)=−3.01 dB\beta = 10 \log_{10}\left(\frac{5.00 \times 10^{-13}}{1.00 \times 10^{-12}}\right) = 10 \log_{10}(0.500) \approx 10(-0.301) = -3.01\text{ dB}.

02

An acoustic isolation booth attenuates sound such that the intensity level drops from +20 dB+20\text{ dB} to −10 dB-10\text{ dB}. Find the ratio of the final intensity IfI_f to the initial intensity IiI_i.

Answer

Using Δβ=βf−βi=10log⁡10(IfIi)\Delta \beta = \beta_f - \beta_i = 10 \log_{10}\left(\frac{I_f}{I_i}\right): −10−20=−30 dB=10log⁡10(IfIi)  ⟹  log⁡10(IfIi)=−3  ⟹  IfIi=10−3=0.001-10 - 20 = -30\text{ dB} = 10 \log_{10}\left(\frac{I_f}{I_i}\right) \implies \log_{10}\left(\frac{I_f}{I_i}\right) = -3 \implies \frac{I_f}{I_i} = 10^{-3} = 0.001.

03

Two faint, independent sound sources in an acoustic lab produce intensity levels of β1=−10 dB\beta_1 = -10\text{ dB} and β2=−7 dB\beta_2 = -7\text{ dB} relative to I0=1.00×10−12 W/m2I_0 = 1.00 \times 10^{-12}\text{ W/m}^2. Find the total sound intensity level βtot\beta_{\text{tot}} when both sources operate simultaneously.

Answer

First, find the intensities: I1=I0×10−10/10=0.10I0I_1 = I_0 \times 10^{-10/10} = 0.10 I_0 and I2=I0×10−7/10≈0.20I0I_2 = I_0 \times 10^{-7/10} \approx 0.20 I_0. The total intensity is Itot=I1+I2=0.30I0I_{\text{tot}} = I_1 + I_2 = 0.30 I_0. Then compute βtot=10log⁡10(0.30)≈10(−0.523)=−5.23 dB\beta_{\text{tot}} = 10 \log_{10}(0.30) \approx 10(-0.523) = -5.23\text{ dB}.

Loading workspace…