Resources

A parallel-plate capacitor has plate area A=0.0500 m2A = 0.0500\text{ m}^2 and is filled with a dielectric material of dielectric constant κ=4.20\kappa = 4.20 and dielectric strength Emax=2.40×107 V/mE_{\text{max}} = 2.40 \times 10^7\text{ V/m}. (a) What is the minimum allowable plate separation dmind_{\text{min}} in millimeters (mm\text{mm}) if the capacitor must withstand a maximum operating voltage of ΔVmax=6.00 kV\Delta V_{\text{max}} = 6.00\text{ kV} without dielectric breakdown occurring? (b) Operating at this critical threshold voltage and minimum plate separation, calculate the maximum electrostatic energy UmaxU_{\text{max}} that can be stored in the capacitor in joules (J\text{J}). Take ε0=8.854×10−12 F/m\varepsilon_0 = 8.854 \times 10^{-12}\text{ F/m}.

Answer and steps

Final answer

(a) dmin=0.250 mmd_{\text{min}} = 0.250\text{ mm}; (b) Umax=0.134 JU_{\text{max}} = 0.134\text{ J}

Steps

Part (a): Determining the Minimum Plate Separation

The dielectric strength EmaxE_{\text{max}} of an insulating material is the maximum magnitude of the electric field it can sustain before electrical breakdown occurs. Assuming a uniform electric field between the parallel plates, the relationship between the potential difference ΔV\Delta V, electric field EE, and plate separation dd is:

E=ΔVdE = \frac{\Delta V}{d}

To prevent electrical breakdown when the operating voltage reaches ΔVmax=6.00 kV=6.00×103 V\Delta V_{\text{max}} = 6.00\text{ kV} = 6.00 \times 10^3\text{ V}, the electric field must not exceed EmaxE_{\text{max}}:

ΔVmaxd≤Emax  ⟹  d≥ΔVmaxEmax\frac{\Delta V_{\text{max}}}{d} \le E_{\text{max}} \implies d \ge \frac{\Delta V_{\text{max}}}{E_{\text{max}}}

Thus, the minimum allowable separation dmind_{\text{min}} is:

dmin=ΔVmaxEmax=6.00×103 V2.40×107 V/m=2.50×10−4 md_{\text{min}} = \frac{\Delta V_{\text{max}}}{E_{\text{max}}} = \frac{6.00 \times 10^3\text{ V}}{2.40 \times 10^7\text{ V/m}} = 2.50 \times 10^{-4}\text{ m}

Converting meters to millimeters (1 m=103 mm1\text{ m} = 10^3\text{ mm}):

dmin=2.50×10−4×103 mm=0.250 mmd_{\text{min}} = 2.50 \times 10^{-4} \times 10^3\text{ mm} = 0.250\text{ mm}


Part (b): Calculating the Maximum Stored Electrostatic Energy

First, calculate the capacitance CC of the parallel-plate capacitor at this minimum plate separation:

C=κε0AdminC = \frac{\kappa \varepsilon_0 A}{d_{\text{min}}}

Substitute the given values into the formula:

C=4.20⋅(8.854×10−12 F/m)⋅0.0500 m22.50×10−4 m=7.437×10−9 FC = \frac{4.20 \cdot (8.854 \times 10^{-12}\text{ F/m}) \cdot 0.0500\text{ m}^2}{2.50 \times 10^{-4}\text{ m}} = 7.437 \times 10^{-9}\text{ F}

The electrostatic potential energy UU stored in a capacitor is given by:

U=12C(ΔV)2U = \frac{1}{2} C (\Delta V)^2

At the critical maximum voltage ΔVmax=6.00×103 V\Delta V_{\text{max}} = 6.00 \times 10^3\text{ V}:

Umax=12⋅(7.437×10−9 F)⋅(6.00×103 V)2U_{\text{max}} = \frac{1}{2} \cdot (7.437 \times 10^{-9}\text{ F}) \cdot (6.00 \times 10^3\text{ V})^2

Umax=12⋅(7.437×10−9 F)⋅(3.60×107 V2)≈0.134 JU_{\text{max}} = \frac{1}{2} \cdot (7.437 \times 10^{-9}\text{ F}) \cdot (3.60 \times 10^7\text{ V}^2) \approx 0.134\text{ J}

(Alternative check using energy density: U=u⋅Volume=12κε0Emax2(A⋅dmin)=0.134 JU = u \cdot \text{Volume} = \frac{1}{2}\kappa \varepsilon_0 E_{\text{max}}^2 (A \cdot d_{\text{min}}) = 0.134\text{ J}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to include the dielectric constant κ when calculating the capacitance and electrostatic energy in part (b).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dmin=ΔVmaxEmax=60002.40×107=2.50×10−4 m⟹dmin=0.250 mmd_{\text{min}} = \frac{\Delta V_{\text{max}}}{E_{\text{max}}} = \frac{6000}{2.40 \times 10^7} = 2.50 \times 10^{-4}\text{ m} \Longrightarrow d_{\text{min}} = 0.250\text{ mm}

  2. Step 2

    C=ε0Admin=(8.854×10−12)(0.0500)(2.50×10−4)=1.771×10−9 FC = \frac{\varepsilon_0 A}{d_{\text{min}}} = \frac{(8.854 \times 10^{-12})(0.0500)}{(2.50 \times 10^{-4})} = 1.771 \times 10^{-9}\text{ F}

    Correct

    C=κε0Admin=4.20⋅(8.854×10−12 F/m)⋅0.0500 m22.50×10−4 m=7.437×10−9 FC = \frac{\kappa \varepsilon_0 A}{d_{\text{min}}} = \frac{4.20 \cdot (8.854 \times 10^{-12}\text{ F/m}) \cdot 0.0500\text{ m}^2}{2.50 \times 10^{-4}\text{ m}} = 7.437 \times 10^{-9}\text{ F}

    Because the space between the plates is filled with a dielectric material of constant κ=4.20\kappa = 4.20, the capacitance increases by a factor of κ\kappa. You omitted κ\kappa from the parallel-plate capacitance formula.

  3. Step 3

    Umax=12C(ΔVmax)2=12(1.771×10−9)(6000)2=0.0319 JU_{\text{max}} = \frac{1}{2} C (\Delta V_{\text{max}})^2 = \frac{1}{2}(1.771 \times 10^{-9})(6000)^2 = 0.0319\text{ J}

    Correct

    Umax=12C(ΔVmax)2=12(7.437×10−9 F)(6.00×103 V)2≈0.134 JU_{\text{max}} = \frac{1}{2} C (\Delta V_{\text{max}})^2 = \frac{1}{2}(7.437 \times 10^{-9}\text{ F})(6.00 \times 10^3\text{ V})^2 \approx 0.134\text{ J}

    Your energy formula U=12C(ΔV)2U = \frac{1}{2}C(\Delta V)^2 and arithmetic were correct, but the final energy value was reduced by a factor of 4.204.20 due to the missing dielectric constant in your capacitance calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the dielectric strength EmaxE_{\text{max}} to determine the minimum plate separation in part (a).

You converted the plate separation from meters to millimeters accurately.

You selected the correct energy formula U=12C(ΔV)2U = \frac{1}{2}C(\Delta V)^2 and evaluated the expression accurately using your calculated capacitance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Dielectric Constant in Capacitance

Omitting κ\kappa in C=κε0AdC = \frac{\kappa \varepsilon_0 A}{d} when calculating the capacitance of a dielectric-filled capacitor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on the standard vacuum capacitance formula C0=ε0AdC_0 = \frac{\varepsilon_0 A}{d} instead of accounting for the dielectric material filling the plate gap, which scales the capacitance by κ\kappa.

REASONING PATH
Your ACEpath teacher’s suggested approach
Capacitance with a Dielectric
  • When a dielectric with constant κ\kappa completely fills the volume between the plates, the capacitance is C=κC0=κε0AdC = \kappa C_0 = \frac{\kappa \varepsilon_0 A}{d}.

  • Always check whether the gap is vacuum/air or filled with an insulating material, and include κ\kappa directly in the numerator of your capacitance formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply your vacuum capacitance value by κ=4.20\kappa = 4.20: C=4.20×1.771×10−9 F=7.437×10−9 FC = 4.20 \times 1.771 \times 10^{-9}\text{ F} = 7.437 \times 10^{-9}\text{ F}.

  2. Substitute this corrected capacitance into the electrostatic energy formula: Umax=12(7.437×10−9 F)(6.00×103 V)2U_{\text{max}} = \frac{1}{2}(7.437 \times 10^{-9}\text{ F})(6.00 \times 10^3\text{ V})^2.

Final answer

Umax=0.134 JU_{\text{max}} = 0.134\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • When setting up a problem involving capacitors, explicitly highlight whether a dielectric constant κ>1\kappa > 1 is specified in the problem statement.

  • Practice writing C=κε0AdC = \frac{\kappa \varepsilon_0 A}{d} as your default formula, letting κ=1\kappa = 1 only when the medium is explicitly a vacuum or air.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the voltage when computing the electrostatic energy, using U = (1/2) C ΔV.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dmin=ΔVmaxEmax=6.00×1032.40×107=2.50×10−4 m  ⟹  dmin=0.250 mmd_{\text{min}} = \frac{\Delta V_{\text{max}}}{E_{\text{max}}} = \frac{6.00 \times 10^3}{2.40 \times 10^7} = 2.50 \times 10^{-4}\text{ m} \implies d_{\text{min}} = 0.250\text{ mm}

  2. Step 2

    C=κε0Admin=(4.20)(8.854×10−12)(0.0500)2.50×10−4=7.437×10−9 FC = \frac{\kappa \varepsilon_0 A}{d_{\text{min}}} = \frac{(4.20)(8.854 \times 10^{-12})(0.0500)}{2.50 \times 10^{-4}} = 7.437 \times 10^{-9}\text{ F}

  3. Step 3

    Umax=12CΔVmax=12(7.437×10−9)(6000)=2.23×10−5 JU_{\text{max}} = \frac{1}{2} C \Delta V_{\text{max}} = \frac{1}{2}(7.437 \times 10^{-9})(6000) = 2.23 \times 10^{-5}\text{ J}

    Correct

    Umax=12C(ΔVmax)2=12(7.437×10−9)(6.00×103)2≈0.134 JU_{\text{max}} = \frac{1}{2} C (\Delta V_{\text{max}})^2 = \frac{1}{2}(7.437 \times 10^{-9})(6.00 \times 10^3)^2 \approx 0.134\text{ J}

    You used U=12CΔVU = \frac{1}{2} C \Delta V rather than squaring the potential difference. The correct formula for electrostatic energy is U=12C(ΔV)2U = \frac{1}{2} C (\Delta V)^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related dielectric strength to maximum voltage and plate separation.

You converted units properly from meters to millimeters.

You correctly used the dielectric formula to calculate the capacitance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing exponent on voltage in capacitor energy formula

You omitted the power of 22 on ΔV\Delta V when substituting values into the energy equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the linear charge relationship Q=CΔVQ = C \Delta V or energy expressions with the quadratic dependence of energy on potential difference U=12C(ΔV)2U = \frac{1}{2} C (\Delta V)^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis of Energy
  • Capacitor potential energy has units of joules (J\text{J}), where 1 J=1 C⋅1 V=1 F⋅V21\text{ J} = 1\text{ C} \cdot 1\text{ V} = 1\text{ F} \cdot \text{V}^2.

  • Always verify that your formula produces units of F⋅V2\text{F} \cdot \text{V}^2, requiring ΔV\Delta V to be squared.

Three Equivalent Energy Formulas
  • U=12QΔV=12C(ΔV)2=Q22CU = \frac{1}{2} Q \Delta V = \frac{1}{2} C (\Delta V)^2 = \frac{Q^2}{2C}.

  • Notice that every version involves the product of two first-order electrical quantities or a squared quantity divided by capacitance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the energy formula explicitly: Umax=12C(ΔVmax)2U_{\text{max}} = \frac{1}{2} C (\Delta V_{\text{max}})^2.

  2. Substitute C=7.437×10−9 FC = 7.437 \times 10^{-9}\text{ F} and ΔVmax=6.00×103 V\Delta V_{\text{max}} = 6.00 \times 10^3\text{ V}.

  3. Compute the square of the voltage: (6.00×103 V)2=3.60×107 V2(6.00 \times 10^3\text{ V})^2 = 3.60 \times 10^7\text{ V}^2.

  4. Multiply: Umax=12(7.437×10−9 F)(3.60×107 V2)≈0.134 JU_{\text{max}} = \frac{1}{2} (7.437 \times 10^{-9}\text{ F})(3.60 \times 10^7\text{ V}^2) \approx 0.134\text{ J}.

Final answer

(a) dmin=0.250 mmd_{\text{min}} = 0.250\text{ mm}; (b) Umax=0.134 JU_{\text{max}} = 0.134\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the work integral W=∫0QV(q) dq=∫0QqC dq=Q22C=12C(ΔV)2W = \int_0^Q V(q)\,dq = \int_0^Q \frac{q}{C}\,dq = \frac{Q^2}{2C} = \frac{1}{2}C(\Delta V)^2 to reinforce why voltage must be squared.

  • Check units before finalizing energy calculations to ensure you have F⋅V2\text{F} \cdot \text{V}^2 rather than F⋅V\text{F} \cdot \text{V}.

OverviewACEpath Teacher's Diagnosis

03 The student fails to convert the operating voltage from kilovolts to volts, substituting 6.00 directly instead of 6000 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    dmin=ΔVmaxEmax  ⟹  dmin=6.002.40×107=2.50×10−7 m  ⟹  dmin=2.50×10−4 mmd_{\text{min}} = \frac{\Delta V_{\text{max}}}{E_{\text{max}}} \implies d_{\text{min}} = \frac{6.00}{2.40 \times 10^7} = 2.50 \times 10^{-7}\text{ m} \implies d_{\text{min}} = 2.50 \times 10^{-4}\text{ mm}

    Correct

    dmin=ΔVmaxEmax=6.00×103 V2.40×107 V/m=2.50×10−4 m=0.250 mmd_{\text{min}} = \frac{\Delta V_{\text{max}}}{E_{\text{max}}} = \frac{6.00 \times 10^3\text{ V}}{2.40 \times 10^7\text{ V/m}} = 2.50 \times 10^{-4}\text{ m} = 0.250\text{ mm}

    You set up the correct relationship between breakdown field and voltage, but you substituted ΔV=6.00\Delta V = 6.00 without converting the given 6.00 kV6.00\text{ kV} into standard SI units (6.00×103 V6.00 \times 10^3\text{ V}).

  2. Step 2

    C=κε0Admin=(4.20)(8.854×10−12)(0.0500)2.50×10−7=7.437×10−6 FC = \frac{\kappa \varepsilon_0 A}{d_{\text{min}}} = \frac{(4.20)(8.854 \times 10^{-12})(0.0500)}{2.50 \times 10^{-7}} = 7.437 \times 10^{-6}\text{ F}

    Correct

    C=κε0Admin=(4.20)(8.854×10−12 F/m)(0.0500 m2)2.50×10−4 m=7.437×10−9 FC = \frac{\kappa \varepsilon_0 A}{d_{\text{min}}} = \frac{(4.20)(8.854 \times 10^{-12}\text{ F/m})(0.0500\text{ m}^2)}{2.50 \times 10^{-4}\text{ m}} = 7.437 \times 10^{-9}\text{ F}

    Your formula and arithmetic here are mathematically sound, but the numerical result is off by a factor of 10310^3 because it inherits your incorrect plate separation from Step 1.

  3. Step 3

    Umax=12C(ΔVmax)2=(12)(7.437×10−6)(6.00)2=1.34×10−4 JU_{\text{max}} = \frac{1}{2} C (\Delta V_{\text{max}})^2 = \left(\frac{1}{2}\right)(7.437 \times 10^{-6})(6.00)^2 = 1.34 \times 10^{-4}\text{ J}

    Correct

    Umax=12C(ΔVmax)2=12(7.437×10−9 F)(6.00×103 V)2≈0.134 JU_{\text{max}} = \frac{1}{2} C (\Delta V_{\text{max}})^2 = \frac{1}{2}(7.437 \times 10^{-9}\text{ F})(6.00 \times 10^3\text{ V})^2 \approx 0.134\text{ J}

    You selected the correct energy formula, but you repeated the unit conversion mistake by using ΔVmax=6.00\Delta V_{\text{max}} = 6.00 instead of 6.00×103 V6.00 \times 10^3\text{ V}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the maximum allowable electric field to the potential difference and plate separation.

You correctly used the parallel-plate capacitance formula with a dielectric material.

You correctly identified the electrostatic potential energy formula for a charged capacitor.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
SI Unit Prefix Omission

You substituted the numerical value 6.006.00 directly instead of converting the prefix k\text{k} (kilo) to 10310^3.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking metric prefixes before plugging numbers into standard SI equations leads to values that are off by several orders of magnitude.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Metric Prefixes Before Calculating
  • Every input quantity must be expressed in base SI units: 1 kV=103 V1\text{ kV} = 10^3\text{ V}, 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}, and 1μF=10−6 F1\mu\text{F} = 10^{-6}\text{ F}.

  • Always rewrite quantities with prefixes into scientific notation before substituting them into formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the maximum operating voltage to base SI units: ΔVmax=6.00 kV=6.00×103 V\Delta V_{\text{max}} = 6.00\text{ kV} = 6.00 \times 10^3\text{ V}.

  2. Calculate minimum separation: dmin=ΔVmaxEmax=6.00×103 V2.40×107 V/m=2.50×10−4 m=0.250 mmd_{\text{min}} = \frac{\Delta V_{\text{max}}}{E_{\text{max}}} = \frac{6.00 \times 10^3\text{ V}}{2.40 \times 10^7\text{ V/m}} = 2.50 \times 10^{-4}\text{ m} = 0.250\text{ mm}.

  3. Calculate capacitance with the correct separation: C=κε0Admin=4.20⋅(8.854×10−12 F/m)⋅0.0500 m22.50×10−4 m=7.437×10−9 FC = \frac{\kappa \varepsilon_0 A}{d_{\text{min}}} = \frac{4.20 \cdot (8.854 \times 10^{-12}\text{ F/m}) \cdot 0.0500\text{ m}^2}{2.50 \times 10^{-4}\text{ m}} = 7.437 \times 10^{-9}\text{ F}.

  4. Calculate maximum stored energy using the full voltage: Umax=12C(ΔVmax)2=12(7.437×10−9 F)(6.00×103 V)2=0.134 JU_{\text{max}} = \frac{1}{2} C (\Delta V_{\text{max}})^2 = \frac{1}{2}(7.437 \times 10^{-9}\text{ F})(6.00 \times 10^3\text{ V})^2 = 0.134\text{ J}.

Final answer

(a) dmin=0.250 mmd_{\text{min}} = 0.250\text{ mm}; (b) Umax=0.134 JU_{\text{max}} = 0.134\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before writing any calculation, explicitly convert all given prefixed units (like kV\text{kV}, cm\text{cm}, mm\text{mm}) into base SI units on your paper.

  • Check that your final electrostatic energy scale is physically reasonable for a high-voltage bench capacitor (typically millijoules to joules, rather than fractional microjoules).

Lock it in

Similar question

01

A parallel-plate capacitor with plate area A=0.0200 m2A = 0.0200\text{ m}^2 and plate separation d=1.00 mmd = 1.00\text{ mm} is filled with Teflon (κ=2.10\kappa = 2.10). What is its capacitance? Take ε0=8.854×10−12 F/m\varepsilon_0 = 8.854 \times 10^{-12}\text{ F/m}.

Answer

C=3.72×10−10 FC = 3.72 \times 10^{-10}\text{ F} (or 372 pF372\text{ pF}). Key steps: Convert d=1.00×10−3 md = 1.00 \times 10^{-3}\text{ m}. Use C=κε0Ad=2.10⋅(8.854×10−12)⋅0.02001.00×10−3=3.719×10−10 FC = \frac{\kappa \varepsilon_0 A}{d} = \frac{2.10 \cdot (8.854 \times 10^{-12}) \cdot 0.0200}{1.00 \times 10^{-3}} = 3.719 \times 10^{-10}\text{ F}.

02

A parallel-plate capacitor filled with neoprene rubber (κ=6.70\kappa = 6.70, dielectric strength Emax=1.20×107 V/mE_{\text{max}} = 1.20 \times 10^7\text{ V/m}) has plate area A=0.0400 m2A = 0.0400\text{ m}^2. If the capacitor operates at its maximum field EmaxE_{\text{max}} with plate separation d=0.500 mmd = 0.500\text{ mm}, find the maximum operating voltage ΔVmax\Delta V_{\text{max}} and the stored electrostatic energy UU at this limit.

Answer

ΔVmax=6.00 kV\Delta V_{\text{max}} = 6.00\text{ kV}, U=0.0854 JU = 0.0854\text{ J}. Key steps: ΔVmax=Emaxd=(1.20×107 V/m)(5.00×10−4 m)=6000 V\Delta V_{\text{max}} = E_{\text{max}} d = (1.20 \times 10^7\text{ V/m})(5.00 \times 10^{-4}\text{ m}) = 6000\text{ V}. Capacitance C=κε0Ad=6.70⋅(8.854×10−12)⋅0.04005.00×10−4=4.746×10−9 FC = \frac{\kappa \varepsilon_0 A}{d} = \frac{6.70 \cdot (8.854 \times 10^{-12}) \cdot 0.0400}{5.00 \times 10^{-4}} = 4.746 \times 10^{-9}\text{ F}. Energy U=12C(ΔV)2=12(4.746×10−9)(6000)2≈0.0854 JU = \frac{1}{2} C (\Delta V)^2 = \frac{1}{2}(4.746 \times 10^{-9})(6000)^2 \approx 0.0854\text{ J}.

03

Two identical parallel-plate capacitors 11 and 22 both have plate area AA and separation dd. Capacitor 11 is empty (vacuum), while Capacitor 22 is filled with a dielectric material of constant κ\kappa. Both are charged to the same potential difference ΔV\Delta V. Express the ratio of the energy stored in Capacitor 22 to Capacitor 11, U2/U1U_2 / U_1, in terms of κ\kappa, and explain which capacitor stores more energy and why.

Answer

U2U1=κ\frac{U_2}{U_1} = \kappa. Key steps: For a fixed potential difference ΔV\Delta V, stored energy is U=12C(ΔV)2U = \frac{1}{2} C (\Delta V)^2. Since C2=κC1C_2 = \kappa C_1, we have U2=12(κC1)(ΔV)2=κU1U_2 = \frac{1}{2}(\kappa C_1)(\Delta V)^2 = \kappa U_1. Capacitor 22 stores κ\kappa times as much energy because the dielectric allows more charge Q=CΔV=κQ1Q = C \Delta V = \kappa Q_1 to be held on the plates at the same voltage.

Loading workspace…