Resources

A roller coaster car of mass m=850 kgm = 850\text{ kg} passes over the crest of a vertical hill that has a circular radius of curvature r1=32.0 mr_1 = 32.0\text{ m} at a speed of v1=12.0 m/sv_1 = 12.0\text{ m/s}, and later enters a circular valley of radius of curvature r2=24.0 mr_2 = 24.0\text{ m} at a speed of v2=16.0 m/sv_2 = 16.0\text{ m/s}. Taking the vertically upward direction as positive and using g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the normal force exerted by the track on the car at (a) the crest of the hill and (b) the bottom of the valley.

Answer and steps

Final answer

(a) FN,1=4.51×103 NF_{N,1} = 4.51 \times 10^3\text{ N} (upward); (b) FN,2=1.74×104 NF_{N,2} = 1.74 \times 10^4\text{ N} (upward)

Steps

General Principle of Vertical Circular Motion

When an object moves along a curved path in a vertical plane, it experiences a centripetal acceleration directed toward the center of curvature:

ac=v2ra_c = \frac{v^2}{r}

By Newton's second law, the net radial force must provide this centripetal acceleration:

∑Fradial=mac\sum F_{\text{radial}} = m a_c

Taking the vertically upward direction as positive, two vertical forces act on the roller coaster car:

  1. The normal force F⃗N\vec{F}_N directed upward from the track.
  2. The gravitational force F⃗g=mg⃗\vec{F}_g = m\vec{g} directed downward.

Part (a): At the Crest of the Hill

  1. Identify the direction of acceleration:
    At the crest of a hill, the center of curvature lies directly beneath the car. Therefore, the centripetal acceleration points vertically downward: ay=−v12r1a_y = -\frac{v_1^2}{r_1}
  2. Apply Newton's second law:
    ∑Fy=FN,1−mg=−mv12r1\sum F_y = F_{N,1} - mg = -m\frac{v_1^2}{r_1}

    Rearranging to solve for FN,1F_{N,1}: FN,1=m(g−v12r1)F_{N,1} = m\left(g - \frac{v_1^2}{r_1}\right)

  3. Substitute the given values:

    • m=850 kgm = 850\text{ kg}
    • g=9.80 m/s2g = 9.80\text{ m/s}^2
    • v1=12.0 m/sv_1 = 12.0\text{ m/s}
    • r1=32.0 mr_1 = 32.0\text{ m}

    v12r1=(12.0 m/s)232.0 m=144 m2/s232.0 m=4.50 m/s2\frac{v_1^2}{r_1} = \frac{(12.0\text{ m/s})^2}{32.0\text{ m}} = \frac{144\text{ m}^2/\text{s}^2}{32.0\text{ m}} = 4.50\text{ m/s}^2

    FN,1=(850 kg)(9.80 m/s2−4.50 m/s2)=(850 kg)(5.30 m/s2)=4505 NF_{N,1} = (850\text{ kg})(9.80\text{ m/s}^2 - 4.50\text{ m/s}^2) = (850\text{ kg})(5.30\text{ m/s}^2) = 4505\text{ N}

    Expressed to three significant figures: FN,1=4.51×103 N(upward)F_{N,1} = 4.51 \times 10^3\text{ N}\quad (\text{upward})

Common Pitfall: A common mistake is adding the centripetal term at the top of a hill. Remember that the car is accelerating downward toward the center of curvature, meaning gravity provides part of the required inward force, making the track support less weight (FN<mgF_N < mg).


Part (b): At the Bottom of the Valley

  1. Identify the direction of acceleration:
    At the bottom of a circular dip or valley, the center of curvature is directly above the car. Thus, the centripetal acceleration points vertically upward: ay=+v22r2a_y = +\frac{v_2^2}{r_2}
  2. Apply Newton's second law:
    ∑Fy=FN,2−mg=mv22r2\sum F_y = F_{N,2} - mg = m\frac{v_2^2}{r_2}

    Rearranging to solve for FN,2F_{N,2}: FN,2=m(g+v22r2)F_{N,2} = m\left(g + \frac{v_2^2}{r_2}\right)

  3. Substitute the given values:

    • v2=16.0 m/sv_2 = 16.0\text{ m/s}
    • r2=24.0 mr_2 = 24.0\text{ m}

    v22r2=(16.0 m/s)224.0 m=256 m2/s224.0 m≈10.67 m/s2\frac{v_2^2}{r_2} = \frac{(16.0\text{ m/s})^2}{24.0\text{ m}} = \frac{256\text{ m}^2/\text{s}^2}{24.0\text{ m}} \approx 10.67\text{ m/s}^2

    FN,2=(850 kg)(9.80 m/s2+10.67 m/s2)=(850 kg)(20.47 m/s2)≈1.74×104 NF_{N,2} = (850\text{ kg})(9.80\text{ m/s}^2 + 10.67\text{ m/s}^2) = (850\text{ kg})(20.47\text{ m/s}^2) \approx 1.74 \times 10^4\text{ N}

    Expressed to three significant figures: FN,2=1.74×104 N(upward)F_{N,2} = 1.74 \times 10^4\text{ N}\quad (\text{upward})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the centripetal acceleration as directed upward at the crest of the hill, erroneously adding the centripetal force to the weight instead of subtracting it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fnet=N1−mg=mv12r1  ⟹  N1=m(g+v12r1)F_{\text{net}} = N_1 - mg = m\frac{v_1^2}{r_1} \implies N_1 = m\left(g + \frac{v_1^2}{r_1}\right)

    Correct

    Fnet=N1−mg=−mv12r1  ⟹  N1=m(g−v12r1)F_{\text{net}} = N_1 - mg = -m\frac{v_1^2}{r_1} \implies N_1 = m\left(g - \frac{v_1^2}{r_1}\right)

    At the crest of the hill, the center of circular curvature lies below the track, meaning the centripetal acceleration points downward (−y-y). With upward defined as positive, the net force equation must be N1−mg=−mv12r1N_1 - mg = -m\frac{v_1^2}{r_1}.

  2. Step 2

    N1=850×(9.80+12.02/32.0)=850×(9.80+4.50)  ⟹  N1=12155 NN_1 = 850 \times (9.80 + 12.0^2 / 32.0) = 850 \times (9.80 + 4.50) \implies N_1 = 12155\text{ N}

    Correct

    N1=850×(9.80−4.50)=4505 N≈4.51×103 NN_1 = 850 \times (9.80 - 4.50) = 4505\text{ N} \approx 4.51 \times 10^3\text{ N}

    This value followed directly from the sign error in Step 1. Adding the terms yielded 12155 N12155\text{ N} instead of subtracting to find 4505 N4505\text{ N}.

  3. Step 3

    Fnet=N2−mg=mv22r2  ⟹  N2=m(g+v22r2)F_{\text{net}} = N_2 - mg = m\frac{v_2^2}{r_2} \implies N_2 = m\left(g + \frac{v_2^2}{r_2}\right)

  4. Step 4

    N2=850×(9.80+16.02/24.0)=850×(9.80+10.67)  ⟹  N2=17400 NN_2 = 850 \times (9.80 + 16.0^2 / 24.0) = 850 \times (9.80 + 10.67) \implies N_2 = 17400\text{ N}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the two vertical forces acting on the car as gravity and the normal force.

You correctly calculated the centripetal acceleration magnitudes v12r1=4.50 m/s2\frac{v_1^2}{r_1} = 4.50\text{ m/s}^2 and v22r2≈10.67 m/s2\frac{v_2^2}{r_2} \approx 10.67\text{ m/s}^2.

You set up and solved the dynamic equation at the bottom of the valley completely correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect acceleration vector direction

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the centripetal acceleration term as intrinsically positive (upward) regardless of where the center of curvature is located along the vertical path.

REASONING PATH
Your ACEpath teacher’s suggested approach
Centripetal Vector Direction
  • Centripetal acceleration always points toward the center of the circular arc, never by default along +y+y.

  • Sketch the center of curvature first; at a hill crest the center is downward, so a⃗c\vec{a}_c points downward.

Physical Reality Check
  • At the crest of a hill, inertia makes you feel lighter (N<mgN < mg), while in a dip it makes you feel heavier (N>mgN > mg).

  • Verify whether N1<mgN_1 < mg; since mg=8330 Nmg = 8330\text{ N}, your value of 12155 N12155\text{ N} indicates an inverted sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law along the vertical axis with upward as positive: ∑Fy=may\sum F_y = m a_y.

  2. At the crest, the center of curvature is beneath the car, so ay=−v12r1=−4.50 m/s2a_y = -\frac{v_1^2}{r_1} = -4.50\text{ m/s}^2.

  3. Substitute forces: N1−mg=−mv12r1  ⟹  N1=m(g−v12r1)N_1 - mg = -m\frac{v_1^2}{r_1} \implies N_1 = m\left(g - \frac{v_1^2}{r_1}\right).

  4. Compute: N1=850 kg×(9.80 m/s2−4.50 m/s2)=850 kg×5.30 m/s2=4505 NN_1 = 850\text{ kg} \times (9.80\text{ m/s}^2 - 4.50\text{ m/s}^2) = 850\text{ kg} \times 5.30\text{ m/s}^2 = 4505\text{ N}.

Final answer

N1=4.51×103 NN_1 = 4.51 \times 10^3\text{ N} (upward)

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw an arrow from the object toward the center of curvature before writing any ∑F=ma\sum F = ma equation.

  • Check that N<mgN < mg when traveling over a crest and N>mgN > mg when passing through a dip.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the valley with the crest and takes centripetal acceleration as directed downward at the bottom of the valley, subtracting m*v²/r from weight.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fnet=N1−m∗g=−m∗v12/r1  ⟹  N1=m∗(g−v12/r1)  ⟹  N1=850∗(9.80−12.02/32.0)  ⟹  N1=850∗(9.80−4.50)  ⟹  N1=4505 NF_{net} = N_1 - m*g = -m*v_1^2/r_1 \implies N_1 = m*(g - v_1^2/r_1) \implies N_1 = 850*(9.80 - 12.0^2/32.0) \implies N_1 = 850*(9.80 - 4.50) \implies N_1 = 4505\text{ N}

  2. Step 2

    Fnet=N2−m∗g=−m∗v22/r2  ⟹  N2=m∗(g−v22/r2)F_{net} = N_2 - m*g = -m*v_2^2/r_2 \implies N_2 = m*(g - v_2^2/r_2)

    Correct

    Fnet,y=N2−mg=+mv22r2  ⟹  N2=m(g+v22r2)F_{\text{net},y} = N_2 - mg = +\frac{m v_2^2}{r_2} \implies N_2 = m\left(g + \frac{v_2^2}{r_2}\right)

    At the bottom of a valley, the center of curvature is above the car. Therefore, the centripetal acceleration points vertically upward (+v22/r2+v_2^2/r_2). Setting the net acceleration as negative downward reversed the required direction of the net force.

  3. Step 3

    N2=850∗(9.80−16.02/24.0)  ⟹  N2=850∗(9.80−10.67)  ⟹  N2=−739.5 NN_2 = 850*(9.80 - 16.0^2/24.0) \implies N_2 = 850*(9.80 - 10.67) \implies N_2 = -739.5\text{ N}

    Correct

    N2=850(9.80+16.0224.0)=850(9.80+10.67)≈1.74×104 NN_2 = 850\left(9.80 + \frac{16.0^2}{24.0}\right) = 850(9.80 + 10.67) \approx 1.74 \times 10^4\text{ N}

    Your arithmetic followed directly from the incorrect sign in your setup, yielding a negative normal force (N2=−739.5 NN_2 = -739.5\text{ N}), which would mean the track had to pull downward on the car.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the two vertical forces acting on the car as gravity and the normal force.

You correctly assigned a downward centripetal acceleration at the crest of the hill and calculated N1=4505 NN_1 = 4505\text{ N}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Centripetal Acceleration Direction Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the formula derived for the crest (N=m(g−v2/r)N = m(g - v^2/r)) applies identically at the valley, overlooking that the center of curvature at a valley lies above the track, which requires an upward centripetal acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Locate the Center of Curvature
  • Centripetal acceleration a⃗c\vec{a}_c always points directly toward the center of the circular arc.

  • Sketch the circle fitting the track. If the curve is concave up (valley), the center is above the car, so a⃗c\vec{a}_c points upward.

Sanity Check Normal Force
  • A standard track can only push upward on the car (N>0N > 0), and riders feel heavier at the bottom of a dip (N>mgN > mg).

  • If you obtain N<mgN < mg or N<0N < 0 at the bottom of a valley, verify the sign of your acceleration term.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set upward as positive: ay=+v22r2a_y = +\frac{v_2^2}{r_2}.

  2. Apply Newton's second law: Fnet,y=N2−mg=+mv22r2F_{\text{net},y} = N_2 - mg = +\frac{m v_2^2}{r_2}.

  3. Rearrange for the normal force: N2=m(g+v22r2)N_2 = m\left(g + \frac{v_2^2}{r_2}\right).

  4. Substitute the given values: N2=850(9.80+16.0224.0)=850(9.80+10.67)=1.74×104 NN_2 = 850\left(9.80 + \frac{16.0^2}{24.0}\right) = 850(9.80 + 10.67) = 1.74 \times 10^4\text{ N}.

Final answer

(a) FN,1=4.51×103 NF_{N,1} = 4.51 \times 10^3\text{ N} (upward); (b) FN,2=1.74×104 NF_{N,2} = 1.74 \times 10^4\text{ N} (upward)

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram and explicitly sketch the arrow for a⃗c\vec{a}_c toward the center of curvature before writing ∑F=ma\sum F = ma.

  • Check whether your result matches physical intuition: at a dip, the seat must push up harder than your weight to curve your path upward.

OverviewACEpath Teacher's Diagnosis

03 The student equates the normal force directly to the centripetal force at the crest, omitting the force of gravity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N1=m⋅v12/r1  ⟹  N1=850⋅(12.0)2/32.0  ⟹  N1=850⋅4.50  ⟹  N1=3825 NN_1 = m \cdot v_1^2 / r_1 \implies N_1 = 850 \cdot (12.0)^2 / 32.0 \implies N_1 = 850 \cdot 4.50 \implies N_1 = 3825\text{ N}

    Correct

    ∑Fy=N1−mg=−mv12r1  ⟹  N1=m(g−v12r1)=4.51×103 N\sum F_y = N_1 - mg = -m\frac{v_1^2}{r_1} \implies N_1 = m\left(g - \frac{v_1^2}{r_1}\right) = 4.51 \times 10^3\text{ N}

    At the crest of the hill, the center of curvature is below the car, so the net radial force toward the center is mg−N1=mv12r1mg - N_1 = m\frac{v_1^2}{r_1}. Gravity acts downward along with the acceleration, so the normal force is not simply the centripetal force; it is N1=m(g−v12r1)N_1 = m\left(g - \frac{v_1^2}{r_1}\right).

  2. Step 2

    Fnet=N2−m⋅g=m⋅v22/r2  ⟹  N2=m⋅(g+v22/r2)  ⟹  N2=850⋅(9.80+16.02/24.0)  ⟹  N2=17400 NF_{\text{net}} = N_2 - m \cdot g = m \cdot v_2^2 / r_2 \implies N_2 = m \cdot \left(g + v_2^2 / r_2\right) \implies N_2 = 850 \cdot (9.80 + 16.0^2 / 24.0) \implies N_2 = 17400\text{ N}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that circular motion requires a centripetal acceleration of magnitude ac=v2/ra_c = v^2 / r.

You set up and evaluated Newton's second law with proper signs at the bottom of the valley in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted force in net radial force equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated centripetal force mv2/rm v^2 / r as an isolated value for the normal force rather than as the vector sum of all real forces (∑Fradial=Fg+FN\sum F_{\text{radial}} = F_g + F_N) acting along the radial direction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Net force equals mass times acceleration
  • Centripetal force is not an independent physical force; it is the net force pointing toward the center of curvature: ∑Fradial=mac\sum F_{\text{radial}} = m a_c.

  • Always draw a free-body diagram showing real contact and field forces (FNF_N and FgF_g) first, then equate their vector sum to mv2/rm v^2 / r in the direction of the center.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Draw the vertical forces acting on the car at the crest: upward normal force FN,1F_{N,1} and downward gravity mgmg.

  2. Identify the center of curvature as being directly below the track crest, meaning acceleration points downward: ay=−v12/r1a_y = -v_1^2 / r_1.

  3. Write Newton's second law along the vertical axis: FN,1−mg=−mv12r1F_{N,1} - mg = -m\frac{v_1^2}{r_1}.

  4. Rearrange for normal force: FN,1=m(g−v12r1)F_{N,1} = m\left(g - \frac{v_1^2}{r_1}\right).

  5. Substitute the values: FN,1=850(9.80−12.0232.0)=850(9.80−4.50)=4505 N≈4.51×103 NF_{N,1} = 850\left(9.80 - \frac{12.0^2}{32.0}\right) = 850(9.80 - 4.50) = 4505\text{ N} \approx 4.51 \times 10^3\text{ N}.

Final answer

(a) FN,1=4.51×103 NF_{N,1} = 4.51 \times 10^3\text{ N} (upward); (b) FN,2=1.74×104 NF_{N,2} = 1.74 \times 10^4\text{ N} (upward)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams for vertical circular motion at the top, bottom, and sides of a loop.

  • Verify whether the normal force decreases at a crest (FN<mgF_N < mg) and increases at a valley (FN>mgF_N > mg) as an intuitive sanity check.

Lock it in

Similar question

01

A 60.0 kg60.0\text{ kg} stunt driver drives over a circular hill with a radius of 40.0 m40.0\text{ m} at a constant speed of 14.0 m/s14.0\text{ m/s}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find the normal force exerted on the driver at the crest.

Answer

FN=294 NF_N = 294\text{ N}. Key steps: ac=v2r=14.0240.0=4.90 m/s2a_c = \frac{v^2}{r} = \frac{14.0^2}{40.0} = 4.90\text{ m/s}^2 downward. N−mg=−mac  ⟹  N=m(g−ac)=60.0(9.80−4.90)=294 NN - mg = -m a_c \implies N = m(g - a_c) = 60.0(9.80 - 4.90) = 294\text{ N}.

02

A 1200 kg1200\text{ kg} car crosses a humpbacked bridge of radius 50.0 m50.0\text{ m}. At what critical speed vcritv_{\text{crit}} would the car lose contact with the road at the peak? Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

vcrit=22.1 m/sv_{\text{crit}} = 22.1\text{ m/s}. Key steps: Contact is lost when FN=0F_N = 0. At the crest, mg−FN=mv2r  ⟹  mg=mv2r  ⟹  v=gr=9.80×50.0≈22.1 m/smg - F_N = \frac{m v^2}{r} \implies mg = \frac{m v^2}{r} \implies v = \sqrt{gr} = \sqrt{9.80 \times 50.0} \approx 22.1\text{ m/s}.

03

A roller coaster car of mass mm travels through a dip of radius R1R_1 at speed vv and later crests a hill of radius R2R_2 at the same speed vv. If the normal force in the dip is exactly three times the normal force at the crest, find the ratio R1/R2R_1 / R_2 in terms of gg, vv, and numerical constants.

Answer

R1R2=v23v2−2gR2\frac{R_1}{R_2} = \frac{v^2}{3v^2 - 2g R_2} (or equivalently, expressing the relation as v2R1+3v2R2=2g\frac{v^2}{R_1} + 3\frac{v^2}{R_2} = 2g). Key steps: In the dip, Ndip=m(g+v2R1)N_{\text{dip}} = m\left(g + \frac{v^2}{R_1}\right). At the crest, Ncrest=m(g−v2R2)N_{\text{crest}} = m\left(g - \frac{v^2}{R_2}\right). Setting Ndip=3NcrestN_{\text{dip}} = 3 N_{\text{crest}} yields g+v2R1=3g−3v2R2g + \frac{v^2}{R_1} = 3g - 3\frac{v^2}{R_2}, so v2R1=2g−3v2R2\frac{v^2}{R_1} = 2g - \frac{3v^2}{R_2}.

Loading workspace…