Resources
A flat uniform metal sheet is cut into an L-shaped planar lamina bounded by the vertices , , , , , and . An engineer sets up a shifted Cartesian coordinate frame whose origin is placed at the outer corner of the original bounding square, with the positive -axis pointing to the right and the positive -axis pointing upward. Determine the coordinates of the center of mass strictly in this shifted coordinate system.
Answer and steps
Final answer
Steps
Coordinate Transformation to the Shifted Frame
The shifted coordinate system has its origin located at the outer corner of the original square. Since the positive axes point in the same directions (rightward and upward), the transformation between original coordinates and shifted coordinates is:
Transforming the six boundary vertices yields:
Center of Mass of the Boundary Segments
The profile is composed of six straight segments forming a closed perimeter. For uniform linear mass distribution along the perimeter, the center of mass is given by:
Evaluating the length and midpoint for each segment:
-
Segment 1 ( to ):
- Length:
- Midpoint: ,
- Product:
-
Segment 2 ( to ):
- Length:
- Midpoint: ,
- Product:
-
Segment 3 ( to ):
- Length:
- Midpoint: ,
- Product:
-
Segment 4 ( to ):
- Length:
- Midpoint: ,
- Product:
-
Segment 5 ( to ):
- Length:
- Midpoint: ,
- Product:
-
Segment 6 ( to ):
- Length:
- Midpoint: ,
- Product:
Calculating the Coordinates
Summing the lengths:
Summing the first moments of length:
Thus, the -coordinate of the center of mass is:
By symmetry across the line , the -coordinate is identical:
Common Pitfall: A solid 2D planar lamina area yields , whereas evaluating the mass distribution of the bounding outline/perimeter yields . Always check whether the structural model specifies the continuous area or the perimeter frame.
Typical errors
01 The student calculates the center of mass in the original coordinate system correctly but forgets to shift the origin to the new coordinate frame.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You assigned the unshifted coordinates directly to without subtracting the coordinates of the new origin .
WHAT YOU DID WELL
Compliments from Your TeacherYou decomposed the composite L-shaped area into two simple rectangular pieces.
You correctly determined the area and geometric center of each rectangular component.
You correctly used the center-of-mass formula to find in the original frame.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated the primed coordinates directly to the unprimed coordinates instead of shifting them by .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou solved for the position in the convenient initial reference frame but overlooked the final transformation step specified by the problem's shifted coordinate system.
REASONING PATH
Your ACEpath teacher’s suggested approach- Coordinate Translation Rule
When a new origin is placed at position with axes aligned in the same direction, new coordinates relate to original coordinates by and .
Always check whether the problem specifies coordinates relative to a shifted origin and apply and before writing your final answer.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the position of the new origin in the original system: .
Apply the transformation formulas: and .
Substitute the lamina center-of-mass coordinates: and .
02 The student reverses the direction of the coordinate translation, adding the shift of 60.0 cm instead of subtracting it.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
When shifting the origin to , the new coordinates are given by and . You added instead of subtracting it. Because the entire object lies to the left of and below , the coordinates in the shifted frame must be negative.
- Step 4Correct
This final answer is affected by the translation sign error in Step 3 (and reflects the solid area model rather than the boundary outline model).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly partitioned the composite L-shape into two simpler rectangular regions.
You accurately calculated the area and centroid coordinates for each individual region.
You correctly used the weighted centroid formula and recognized the diagonal symmetry of the shape.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou added the shift of instead of subtracting it when converting from the original coordinates to the shifted coordinates .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the vector equation for coordinate translation: moving the coordinate origin to means any physical point has shifted coordinates and . Since the new origin is at the top-right corner of the bounding square (), all points on the sheet lie at and , requiring both and to be negative. Additionally, the reference solution evaluates the center of mass of the boundary perimeter frame (, giving ) rather than the continuous 2D area (which gives ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Coordinate Translation Rule
For a frame whose origin is translated to , the coordinates of a point transform as and .
Always substitute into rather than adding the shift.
- Quadrant Sanity Check
If the physical object lies entirely to the left () and below () the new origin, all shifted coordinates must be strictly negative.
Inspect the sketch after shifting axes to ensure the signs of match the quadrant containing the object.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the coordinate shift transformation and .
For the boundary segment model: find midpoints of the six boundary segments in the shifted frame, sum lengths , and sum moments .
Divide to find , and by symmetry .
03 The student assumes the center of mass is the simple unweighted average of the geometric centers of the two rectangles, ignoring their unequal areas.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
,
You took a simple unweighted average of the centroids rather than weighting each component by its mass (or segment length/area). A composite center of mass must always be weighted by mass: .
- Step 3Correct
You correctly executed the coordinate shift formula , but the input coordinates were incorrect from Step 2.
- Step 4Correct
Because of the unweighted average in Step 2, the final reported coordinates are incorrect.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the coordinates of the centroids for the sub-sections.
You correctly applied the coordinate shift relative to the new origin.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the overall center of mass as a simple midpoint between two component centroids, omitting the weighting factors (mass, area, or length) in the definition . Notice also that the structural profile has reflection symmetry across the line , so and must be identical.
REASONING PATH
Your ACEpath teacher’s suggested approach- Weighted Average Rule
For any composite body, the center of mass is given by . An unweighted average is valid only when .
Always multiply each component's centroid coordinate by its respective mass, area, or segment length before summing.
- Symmetry Check
If a geometric object has line symmetry across , its center of mass must lie on the line .
Check whether your computed coordinates reflect the geometric symmetry before finalizing your result.
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the uniform linear segments forming the perimeter: total length .
Calculate the first moment about the shifted origin: .
Compute .
By reflection symmetry across , .
Lock it in
If an object's position is in frame , what is its position in frame whose origin is at in frame ?
and . New coordinates represent displacement from the new origin.
Similar question
A uniform rectangular plate of width and height has its bottom-left corner at the origin . A new coordinate frame has its origin placed at its top-right corner . Find .
Answer
In the original frame, . Shifting to the new origin gives and . Final answer: .
A uniform T-shaped plate consists of a horizontal bar of size atop a vertical stem of size centered symmetrically. The base of the vertical stem rests on the -axis from to . An observer uses a frame with origin at . Find .
Answer
By symmetry, , so . The stem has area with ; the top bar has area with . Thus . Shifting gives . Final answer: .
A uniform square plate of side has a square hole of side cut from its top-right corner. The bottom-left corner of the original square is at . Find the center of mass in a shifted coordinate system whose origin is at .
Answer
Using the negative mass method: full square centered at ; hole centered at . In the original frame, . By symmetry, . Applying the coordinate shift to : . Final answer: .