Resources

A crate is lowered vertically downward by a crane cable through a vertical displacement of h=12.0 mh = 12.0\text{ m} at a constant downward acceleration of magnitude a=1.80 m/s2a = 1.80\text{ m/s}^2. The mass of the crate is m=250 kgm = 250\text{ kg}, and g=9.80 m/s2g = 9.80\text{ m/s}^2. Using an upward-pointing vertical coordinate axis, calculate: (a) the work done by the gravitational force WgW_g on the crate, (b) the work done by the upward tension force WTW_T exerted by the cable on the crate, and (c) the work done by the crate on the cable Won cableW_{\text{on cable}}.

Answer and steps

Final answer

(a) Wg=+2.94×104 JW_g = +2.94 \times 10^4\text{ J}; (b) WT=−2.40×104 JW_T = -2.40 \times 10^4\text{ J}; (c) Won cable=+2.40×104 JW_{\text{on cable}} = +2.40 \times 10^4\text{ J}.

Steps

Part (a): Work Done by the Gravitational Force on the Crate

The work WW done by a constant force F⃗\vec{F} acting over a displacement d⃗\vec{d} is defined as: W=F⃗⋅d⃗=Fdcos⁡θW = \vec{F} \cdot \vec{d} = F d \cos\theta where θ\theta is the angle between the force vector and the displacement vector.

  1. Identify the force of gravity: The magnitude of the gravitational force acting on the crate is: Fg=mg=(250 kg)(9.80 m/s2)=2450 NF_g = mg = (250\text{ kg})(9.80\text{ m/s}^2) = 2450\text{ N} The gravitational force points vertically downward.
  2. Identify the displacement: The crate is lowered downward, so the displacement vector also points vertically downward with magnitude d=h=12.0 md = h = 12.0\text{ m}.
  3. Calculate the work: Because both the force of gravity and the displacement point in the downward direction, the angle between them is θ=0∘\theta = 0^\circ: Wg=Fgdcos⁡(0∘)=(2450 N)(12.0 m)(+1)=+2.94×104 JW_g = F_g d \cos(0^\circ) = (2450\text{ N})(12.0\text{ m})(+1) = +2.94 \times 10^4\text{ J}

Part (b): Work Done by the Cable Tension on the Crate

  1. Find the tension using Newton's second law: Choosing the upward direction as positive, the net force acting along the vertical yy-axis is: ΣFy=T−mg=may\Sigma F_y = T - mg = m a_y Since the crate accelerates downward at a=1.80 m/s2a = 1.80\text{ m/s}^2, the vertical acceleration is ay=−1.80 m/s2a_y = -1.80\text{ m/s}^2: T−mg=−maT - mg = -ma T=m(g−a)T = m(g - a) Substitute the given values: T=(250 kg)(9.80 m/s2−1.80 m/s2)=(250 kg)(8.00 m/s2)=2000 NT = (250\text{ kg})(9.80\text{ m/s}^2 - 1.80\text{ m/s}^2) = (250\text{ kg})(8.00\text{ m/s}^2) = 2000\text{ N}
  2. Calculate the work done by the tension force: The tension force T⃗\vec{T} pulls upward, while the displacement d⃗\vec{d} is directed downward. The angle between them is θ=180∘\theta = 180^\circ: WT=Tdcos⁡(180∘)=(2000 N)(12.0 m)(−1)=−2.40×104 JW_T = T d \cos(180^\circ) = (2000\text{ N})(12.0\text{ m})(-1) = -2.40 \times 10^4\text{ J}

    Pitfall to avoid: A common error is assuming T=mgT = mg. Because the crate is accelerating downward, the tension must be strictly less than the crate's weight (T<mgT < mg).


Part (c): Work Done by the Crate on the Cable

  1. Identify the force exerted by the crate on the cable: By Newton's third law (action-reaction), the force exerted by the crate on the cable, F⃗on cable\vec{F}_{\text{on cable}}, is equal in magnitude and opposite in direction to the tension force exerted by the cable on the crate: F⃗on cable=−T⃗\vec{F}_{\text{on cable}} = -\vec{T} Thus, the magnitude is Fon cable=2000 NF_{\text{on cable}} = 2000\text{ N}, and it acts vertically downward on the end of the cable.
  2. Calculate the work done on the cable: The point of attachment moves downward through the displacement d=12.0 md = 12.0\text{ m}. Because both the downward pulling force of the crate and the displacement are in the same direction, θ=0∘\theta = 0^\circ: Won cable=Fon cabledcos⁡(0∘)=(2000 N)(12.0 m)(+1)=+2.40×104 JW_{\text{on cable}} = F_{\text{on cable}} d \cos(0^\circ) = (2000\text{ N})(12.0\text{ m})(+1) = +2.40 \times 10^4\text{ J}

    Equivalently, by the definition of interaction forces across the boundary, the work done by object AA on object BB at a common interface is the negative of the work done by object BB on object AA: Won cable=−WT=−(−2.40×104 J)=+2.40×104 JW_{\text{on cable}} = -W_T = -(-2.40 \times 10^4\text{ J}) = +2.40 \times 10^4\text{ J}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that downward acceleration decreases cable tension and instead adds the acceleration term, setting T = m(g + a).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Wg=m⋅g⋅h  ⟹  Wg=(250)(9.80)(12.0)=29400 JW_g = m \cdot g \cdot h \implies W_g = (250)(9.80)(12.0) = 29400\text{ J}

  2. Step 2

    T=m(g+a)=250(9.80+1.80)=2900 N  ⟹  WT=−T⋅h=−(2900)(12.0)=−34800 JT = m(g + a) = 250(9.80 + 1.80) = 2900\text{ N} \implies W_T = -T \cdot h = -(2900)(12.0) = -34800\text{ J}

    Correct

    T=m(g−a)=250(9.80−1.80)=2000 N  ⟹  WT=−Th=−(2000 N)(12.0 m)=−2.40×104 JT = m(g - a) = 250(9.80 - 1.80) = 2000\text{ N} \implies W_T = -Th = -(2000\text{ N})(12.0\text{ m}) = -2.40 \times 10^4\text{ J}

    Because the crate accelerates downward, the downward gravitational force must exceed the upward tension force (mg−T=mamg - T = ma). This gives T=m(g−a)=2000 NT = m(g - a) = 2000\text{ N}, not m(g+a)m(g + a).

  3. Step 3

    Fcrate=T=2900 N downward  ⟹  Won_cable=Fcrate⋅h=(2900)(12.0)=34800 JF_{\text{crate}} = T = 2900\text{ N downward} \implies W_{\text{on\_cable}} = F_{\text{crate}} \cdot h = (2900)(12.0) = 34800\text{ J}

    Correct

    Fon cable=T=2000 N downward  ⟹  Won cable=(2000 N)(12.0 m)=+2.40×104 JF_{\text{on cable}} = T = 2000\text{ N downward} \implies W_{\text{on cable}} = (2000\text{ N})(12.0\text{ m}) = +2.40 \times 10^4\text{ J}

    Your reasoning using Newton's third law and the direction of work was entirely correct, but the final numerical value was affected by the incorrect tension calculated in part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the work done by gravity with the proper positive sign.

You correctly recognized that tension does negative work on the crate because it opposes the downward displacement.

You correctly applied Newton's third law to find the downward force exerted by the crate on the cable and evaluated its work as positive.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in Newton's second law for vertical acceleration

You added the downward acceleration magnitude to gg rather than subtracting it when solving for upward tension.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing downward acceleration with upward acceleration when writing Newton's second law along the vertical axis (T−mg=mayT - mg = m a_y). With the positive axis pointing upward, downward acceleration means ay=−aa_y = -a, so T=m(g−a)<mgT = m(g - a) < mg.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Net Acceleration
  • When an object accelerates downward, net vertical force must point downward, so downward weight must exceed upward support forces.

  • Always verify that T<mgT < mg whenever downward acceleration is present, giving T=m(g−a)T = m(g - a).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up Newton's second law with upward as positive: ΣFy=T−mg=may=−ma\Sigma F_y = T - mg = m a_y = -ma.

  2. Solve for tension: T=m(g−a)=250 kg×(9.80 m/s2−1.80 m/s2)=2000 NT = m(g - a) = 250\text{ kg} \times (9.80\text{ m/s}^2 - 1.80\text{ m/s}^2) = 2000\text{ N}.

  3. Recalculate cable work on the crate: WT=−Th=−(2000 N)(12.0 m)=−2.40×104 JW_T = -Th = -(2000\text{ N})(12.0\text{ m}) = -2.40 \times 10^4\text{ J}.

  4. Recalculate work done on the cable: Won cable=+Th=+(2000 N)(12.0 m)=+2.40×104 JW_{\text{on cable}} = +Th = +(2000\text{ N})(12.0\text{ m}) = +2.40 \times 10^4\text{ J}.

Final answer

(a) Wg=+2.94×104 JW_g = +2.94 \times 10^4\text{ J}; (b) WT=−2.40×104 JW_T = -2.40 \times 10^4\text{ J}; (c) Won cable=+2.40×104 JW_{\text{on cable}} = +2.40 \times 10^4\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram showing both the forces and the acceleration vector before setting up Newton's second law equations.

  • Perform a physical sanity check on support forces: if an elevator or cable lets an object accelerate downward, tension should feel lighter (T<mgT < mg).

OverviewACEpath Teacher's Diagnosis

02 The student ignores the crate's acceleration and assumes tension simply balances gravity, setting T = mg.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Wg=(250)(9.80)(12.0)=29400 JW_g = (250)(9.80)(12.0) = 29400\text{ J}

  2. Step 2

    T=m∗g=(250)(9.80)=2450 N  ⟹  WT=−T∗h=−(2450)(12.0)=−29400 JT = m * g = (250)(9.80) = 2450\text{ N} \implies W_T = -T * h = -(2450)(12.0) = -29400\text{ J}

    Correct

    ΣFy=T−mg=m(−a)  ⟹  T=m(g−a)=2000 N  ⟹  WT=−Th=−2.40×104 J\Sigma F_y = T - mg = m(-a) \implies T = m(g - a) = 2000\text{ N} \implies W_T = -T h = -2.40 \times 10^4\text{ J}

    You assumed T=mgT = mg, but the crate is accelerating downward at a=1.80 m/s2a = 1.80\text{ m/s}^2. Applying Newton's second law gives T−mg=−maT - mg = -ma, which reduces the tension to T=2000 NT = 2000\text{ N}.

  3. Step 3

    Fcrate=2450 N downward  ⟹  Won_cable=(2450)(12.0)=29400 JF_{\text{crate}} = 2450\text{ N downward} \implies W_{\text{on\_cable}} = (2450)(12.0) = 29400\text{ J}

    Correct

    Fon cable=2000 N downward  ⟹  Won cable=(2000 N)(12.0 m)=+2.40×104 JF_{\text{on cable}} = 2000\text{ N downward} \implies W_{\text{on cable}} = (2000\text{ N})(12.0\text{ m}) = +2.40 \times 10^4\text{ J}

    Your reasoning using Newton's third law and the positive sign of the work done on the cable was correct, but your numerical result was affected by the incorrect tension from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the work done by gravity using the proper sign and magnitude.

You correctly recognized that tension does negative work on the crate because it opposes the downward displacement.

You correctly used Newton's third law to show that the crate pulls downward on the cable and does positive work on it.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium assumption during acceleration

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated an accelerating system as if it were in static equilibrium (T=mgT = mg) rather than writing out Newton's second law (ΣF=ma\Sigma F = ma) with downward acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for acceleration before setting forces equal
  • For a vertical cable supporting mass mm, T=mgT = mg holds only when acceleration is zero; when accelerating downward, T=m(g−a)<mgT = m(g - a) < mg.

  • Always draw a free-body diagram and write ΣFy=may\Sigma F_y = m a_y with the proper sign for acceleration before calculating tension.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Newton's second law along the vertical axis with upward as positive: T−mg=may=m(−1.80 m/s2)T - mg = m a_y = m(-1.80\text{ m/s}^2).

  2. Solve for cable tension: T=m(g−a)=(250 kg)(9.80 m/s2−1.80 m/s2)=2000 NT = m(g - a) = (250\text{ kg})(9.80\text{ m/s}^2 - 1.80\text{ m/s}^2) = 2000\text{ N}.

  3. Calculate work done by tension: WT=Tdcos⁡(180∘)=(2000 N)(12.0 m)(−1)=−2.40×104 JW_T = T d \cos(180^\circ) = (2000\text{ N})(12.0\text{ m})(-1) = -2.40 \times 10^4\text{ J}.

  4. Apply Newton's third law to find work on cable: Won cable=−WT=+2.40×104 JW_{\text{on cable}} = -W_T = +2.40 \times 10^4\text{ J}.

Final answer

(a) Wg=+2.94×104 JW_g = +2.94 \times 10^4\text{ J}; (b) WT=−2.40×104 JW_T = -2.40 \times 10^4\text{ J}; (c) Won cable=+2.40×104 JW_{\text{on cable}} = +2.40 \times 10^4\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing free-body diagrams for vertically accelerating objects to identify whether tension is greater than, equal to, or less than weight.

  • Verify Newton's second law equations explicitly before inserting values into work formulas.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly treats the upward vertical coordinate axis as making downward displacement negative in the work equation for gravity, yielding negative gravitational work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δy=−12.0 m  ⟹  Fg=m⋅g=2450 N  ⟹  Wg=Fg⋅Δy=(2450)(−12.0)=−29400 J\Delta y = -12.0\text{ m} \implies F_g = m \cdot g = 2450\text{ N} \implies W_g = F_g \cdot \Delta y = (2450)(-12.0) = -29400\text{ J}

    Correct

    Wg=Fg,yΔy=(−2450 N)(−12.0 m)=+2.94×104 JW_g = F_{g,y}\Delta y = (-2450\text{ N})(-12.0\text{ m}) = +2.94 \times 10^4\text{ J} (or Wg=Fgdcos⁡(0∘)=+2.94×104 JW_g = F_g d \cos(0^\circ) = +2.94 \times 10^4\text{ J})

    When using coordinate components W=FyΔyW = F_y \Delta y, both force and displacement must include their signs relative to the upward yy-axis: Fg,y=−mg=−2450 NF_{g,y} = -mg = -2450\text{ N} and Δy=−12.0 m\Delta y = -12.0\text{ m}. Alternatively, using magnitudes W=Fdcos⁡θW = F d \cos\theta, both F=2450 NF = 2450\text{ N} and d=12.0 md = 12.0\text{ m} are positive, and θ=0∘\theta = 0^\circ because both vectors point downward, giving positive work.

  2. Step 2

    T−m⋅g=m⋅(−a)  ⟹  T=250⋅(9.80−1.80)=2000 N  ⟹  WT=T⋅(−Δy)⋅cos⁡(180∘)=(2000)(12.0)(−1)=−24000 JT - m \cdot g = m \cdot (-a) \implies T = 250 \cdot (9.80 - 1.80) = 2000\text{ N} \implies W_T = T \cdot (-\Delta y) \cdot \cos(180^\circ) = (2000)(12.0)(-1) = -24000\text{ J}

  3. Step 3

    Fon_cable=2000 N downward  ⟹  Won_cable=(2000)(12.0)=24000 JF_{\text{on\_cable}} = 2000\text{ N downward} \implies W_{\text{on\_cable}} = (2000)(12.0) = 24000\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up Newton's second law with downward acceleration to find the cable tension.

You correctly identified the angle θ=180∘\theta = 180^\circ between upward tension and downward displacement to obtain negative tension work.

You correctly applied Newton's third law to find the downward force on the cable and computed its work as positive.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error from mixing scalar magnitude and signed coordinate displacement

You combined a positive magnitude for gravity Fg=2450 NF_g = 2450\text{ N} with a negative displacement Δy=−12.0 m\Delta y = -12.0\text{ m} in W=FΔyW = F \Delta y, producing −29400 J-29400\text{ J}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the component formula W=FxΔx+FyΔyW = F_x \Delta x + F_y \Delta y with the magnitude-angle formula W=Fdcos⁡θW = F d \cos\theta. If you use coordinate components, downward gravity must carry a negative sign (Fg,y=−2450 NF_{g,y} = -2450\text{ N}). If you use the magnitude formula, both FF and dd are strictly non-negative magnitudes, and the sign comes entirely from cos⁡θ\cos\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Choose One Work Formula Consistently
  • Either use 1D components W=FyΔyW = F_y \Delta y (where both FyF_y and Δy\Delta y carry signs relative to the chosen axis) or use magnitudes W=Fdcos⁡θW = F d \cos\theta (where F>0F > 0, d>0d > 0, and θ\theta is the angle between the two vectors).

  • Before calculating work, decide on component form or magnitude-angle form, and verify that force and displacement pointing in the same direction always yield positive work.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that gravity points downward along the negative yy-axis: Fg,y=−mg=−(250 kg)(9.80 m/s2)=−2450 NF_{g,y} = -mg = -(250\text{ kg})(9.80\text{ m/s}^2) = -2450\text{ N}.

  2. Multiply the signed vertical force component by the signed vertical displacement: Wg=Fg,yΔy=(−2450 N)(−12.0 m)=+2.94×104 JW_g = F_{g,y}\Delta y = (-2450\text{ N})(-12.0\text{ m}) = +2.94 \times 10^4\text{ J}.

Final answer

(a) Wg=+2.94×104 JW_g = +2.94 \times 10^4\text{ J}; (b) WT=−2.40×104 JW_T = -2.40 \times 10^4\text{ J}; (c) Won cable=+2.40×104 JW_{\text{on cable}} = +2.40 \times 10^4\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always do a quick physical sanity check on work: if a force has a component in the direction of motion, its work must be positive.

  • Commit to using W=Fdcos⁡θW = F d \cos\theta with strictly positive distances whenever you want to avoid sign confusion with coordinate axes.

Lock it in

Similar question

01

An elevator cab of mass 800 kg800\text{ kg} is lowered through a vertical distance of 10.0 m10.0\text{ m} while accelerating downward at 1.50 m/s21.50\text{ m/s}^2. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the work done on the elevator by the cable tension.

Answer

WT=−6.64×104 JW_T = -6.64 \times 10^4\text{ J}. Key steps: T=m(g−a)=800(9.80−1.50)=6640 NT = m(g - a) = 800(9.80 - 1.50) = 6640\text{ N}; WT=−Td=−(6640 N)(10.0 m)=−6.64×104 JW_T = -T d = -(6640\text{ N})(10.0\text{ m}) = -6.64 \times 10^4\text{ J}.

02

A 5.0 kg5.0\text{ kg} bucket is lowered into a well. It starts from rest and moves downward 6.0 m6.0\text{ m} in 2.0 s2.0\text{ s} with constant acceleration. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find (a) the tension in the rope and (b) the work done by the rope on the bucket.

Answer

(a) T=34 NT = 34\text{ N}, (b) WT=−2.0×102 JW_T = -2.0 \times 10^2\text{ J}. Key steps: d=12at2  ⟹  a=2(6.0)2.02=3.0 m/s2d = \frac{1}{2} a t^2 \implies a = \frac{2(6.0)}{2.0^2} = 3.0\text{ m/s}^2 downward; T=m(g−a)=5.0(9.80−3.0)=34 NT = m(g - a) = 5.0(9.80 - 3.0) = 34\text{ N}; WT=−Td=−(34 N)(6.0 m)=−204 J≈−2.0×102 JW_T = -T d = -(34\text{ N})(6.0\text{ m}) = -204\text{ J} \approx -2.0 \times 10^2\text{ J}.

03

A 120 kg120\text{ kg} load is lowered vertically by a crane over 15.0 m15.0\text{ m}. It moves downward at 4.0 m/s4.0\text{ m/s} and slows to a stop at a constant rate over that distance. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the work done by the cable tension during this deceleration.

Answer

WT=−1.86×104 JW_T = -1.86 \times 10^4\text{ J}. Key steps: vf2=vi2+2ayΔy  ⟹  0=(−4.0)2+2ay(−15.0)  ⟹  ay=+0.533 m/s2v_f^2 = v_i^2 + 2 a_y \Delta y \implies 0 = (-4.0)^2 + 2 a_y (-15.0) \implies a_y = +0.533\text{ m/s}^2 (acceleration is upward because it is slowing downward motion); T=m(g+a)=120(9.80+0.533)=1240 NT = m(g + a) = 120(9.80 + 0.533) = 1240\text{ N}; WT=−Td=−(1240 N)(15.0 m)=−1.86×104 JW_T = -T d = -(1240\text{ N})(15.0\text{ m}) = -1.86 \times 10^4\text{ J}.

Loading workspace…