Resources
Set up a standard Cartesian coordinate system with the origin located on the ground directly below a stationary hovering drone, where the -axis points horizontally to the right and the -axis points vertically upward. At , the drone at position releases a package horizontally in the -direction with an initial velocity vector . Taking the gravitational acceleration vector as and ignoring air resistance: (a) write the parametric position vector and velocity vector as explicit functions of time , and (b) determine the final position vector and final velocity vector at the exact moment the package strikes the ground ().
Answer and steps
Final answer
(a) , ; (b) ,
Steps
Part (a): Parametric Position and Velocity Vectors
In two-dimensional projectile motion without air resistance, the horizontal () and vertical () motions are completely independent:
- Along the horizontal axis, acceleration is zero ().
- Along the vertical axis, acceleration is purely gravitational ().
From the initial conditions at :
- Initial position: ,
- Initial velocity: ,
Using the kinematic equations for constant acceleration:
- Horizontal component of motion:
- Vertical component of motion:
Expressing these components in unit-vector notation:
Part (b): Position and Velocity at Ground Impact
The package strikes the ground when its vertical position reaches :
Common Pitfall: Keep intermediate values unrounded during calculation to avoid rounding errors in the final components.
Substitute into the parametric equations:
- Final position components:
- Final velocity components:
Typical errors
01 The student forgets the factor of 1/2 in the vertical displacement formula, using -g t² instead of -(1/2)g t².
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In the vertical position formula , the acceleration term requires a factor of . Multiplying gives , not .
- Step 3Correct
Your algebra for solving was executed correctly, but the result was affected by using instead of .
- Step 4Correct
You substituted your calculated time into the vectors correctly, but because was derived from the missing factor, the final numerical values are smaller than expected.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the horizontal acceleration is zero, maintaining a constant horizontal velocity of .
You correctly applied vector component notation to represent two-dimensional kinematics.
You used the correct condition to identify ground impact.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of when assembling the vertical position function .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the acceleration term in the velocity equation with the quadratic displacement term , forgetting to divide the acceleration coefficient by 2 when integrating or applying the position kinematic equation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Verify Kinematic Formulas Before Substituting
For constant acceleration, , whereas .
Always write out the general symbolic form before inserting numbers so that the factor is never skipped.
- Perform a Dimensional and Calculus Sanity Check
Differentiating position with respect to time must yield velocity: .
Take the derivative of your position function: , which does not match your vertical velocity . Adjusting the coefficient to ensures .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the full displacement formula with the factor: .
Write the complete position vector: .
Set to find the impact time: .
Substitute into : .
Substitute into : .
(a) , ; (b) ,
02 The student treats the initial height as a negative position or sets y(t) = 45.0 + 4.90 t², adding gravitational displacement rather than subtracting it.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
v(t) = (12.0 i - 9.80 t j)
- Step 2
r(t) = (12.0 t i + (45.0 + 4.90 t^2) j)
Correct(t) = (12.0 t) + (45.0 - 4.90 t^2)
Because gravity acts downward in the direction (), the vertical position term is , which must be subtracted from the initial height, not added.
- Step 3
45.0 + 4.90 t^2 = 0 4.90 t^2 = 45.0 t^2 = 9.18 t = 3.03
Correct45.0 - 4.90 t^2 = 0 4.90 t^2 = 45.0 t 3.03
Setting your expression should algebraically give (no real solution). You dropped the negative sign to force a positive time, which happened because the original equation should have used .
- Step 4
r_{} = (12.0(3.03) i) = (36.4 i) _
- Step 5
v_{} = (12.0 i + 9.80(3.03) j) = (12.0 i + 29.7 j) _
CorrectYour parametric equation in Step 1 had , but here you replaced the minus sign with a plus sign. Because the package is falling downward, the vertical velocity component must remain negative: .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the independent horizontal and vertical initial velocity components.
You set up the parametric velocity vector with the correct downward acceleration sign in Step 1.
You accurately solved for the numerical flight time of and computed the final horizontal displacement.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally changed the negative sign in into a plus sign when evaluating the final velocity.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated gravity as an added magnitude rather than a signed vector quantity pointing along , causing you to write in the vertical position equation and later force signs to resolve mathematical contradictions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Coordinate Consistency Check
When is defined as upward, downward acceleration must have a negative value ().
Always substitute directly into to obtain .
- Physical Direction Sanity Check
An object falling from a height must lose altitude over time () and hit the ground moving downward ().
Verify that your velocity component is negative at ground impact.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the parametric position vector using : .
Set to find impact time: .
Substitute into to find .
(a) , ; (b) ,
03 The student forgets that horizontal velocity remains constant and erroneously applies gravitational acceleration to the x-component.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Gravitational acceleration acts purely along the vertical axis (). Because there is no horizontal acceleration (), the horizontal velocity must remain constant at , giving .
- Step 2
- Step 3Correct
Your calculation correctly followed your parametric position formula, but the result was affected by the horizontal acceleration error from Step 1.
- Step 4Correct
The vertical velocity component is accurate, but the horizontal component was affected by the false acceleration term.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that the package lands when its vertical position satisfies .
You accurately computed the total time of flight as .
You correctly calculated the vertical velocity component at impact as .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated gravitational acceleration as an isotropic deceleration acting on both coordinates rather than restricting it strictly to the vertical coordinate (, ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Component Acceleration Rule
In free-fall projectile motion without air resistance, and .
Always write and separately before writing velocity or position functions.
- Horizontal Velocity Invariance
When , for the entire trajectory.
Check that your horizontal velocity function contains no time-dependent acceleration term.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet horizontal acceleration so that and .
Write the corrected parametric vectors: and .
Substitute the impact time into the horizontal position: .
Combine the components at impact: and .
(a) , ; (b) ,
Lock it in
What is the standard kinematic equation for position under constant acceleration , starting from with initial velocity ?
. Always include the factor of on the acceleration term.
Similar question
A stone is thrown horizontally from a high cliff at . Using , write the parametric position vector and calculate the time required to reach the ground.
Answer
. Setting gives .
An aircraft traveling horizontally at at an altitude of drops an emergency beacon. Taking , find: (a) the time the beacon spends in the air, and (b) its final velocity vector upon impact.
Answer
(a) . (b) .
A projectile is launched from position with initial velocity . Taking , determine the explicit vector equation for and find the horizontal distance traveled when it returns to .
Answer
. Setting gives . Horizontal distance: .