Resources

In an undergraduate physics laboratory experiment, a Kundt's tube apparatus is used to determine the speed of sound in an unknown gas. A lightweight metal rod of length Lrod=1.000 mL_{\text{rod}} = 1.000\text{ m} and density ρ=8.90×103 kg/m3\rho = 8.90 \times 10^3\text{ kg/m}^3 is clamped precisely at its midpoint and stroked to oscillate longitudinally at its fundamental mode. The free end of the rod extends into a glass tube filled with dry argon gas at T=293.15 KT = 293.15\text{ K}. Fine lycopodium powder inside the tube forms distinct acoustic nodal heaps. The distance between 6 consecutive dust nodes is measured with a traveling microscope to be Δx6=0.725 m\Delta x_6 = 0.725\text{ m}. Given that Young's modulus for the rod is Y=1.10×1011 N/m2Y = 1.10 \times 10^{11}\text{ N/m}^2, calculate: (a) the longitudinal resonance frequency ff of the rod, and (b) the measured speed of sound vgasv_{\text{gas}} in the argon gas.

Answer and steps

Final answer

(a) f=1760 Hzf = 1760\text{ Hz}; (b) vgas=510 m/sv_{\text{gas}} = 510\text{ m/s}

Steps

Part (a): Longitudinal Resonance Frequency of the Rod

  1. Speed of longitudinal waves in the rod: The speed vrodv_{\text{rod}} of a longitudinal elastic wave propagating through a thin solid rod depends on its Young's modulus YY and density ρ\rho: vrod=Yρv_{\text{rod}} = \sqrt{\frac{Y}{\rho}}

    Substituting the given values: vrod=1.10×1011 N/m28.90×103 kg/m3≈1.236×107 m2/s2≈3.516×103 m/sv_{\text{rod}} = \sqrt{\frac{1.10 \times 10^{11}\text{ N/m}^2}{8.90 \times 10^3\text{ kg/m}^3}} \approx \sqrt{1.236 \times 10^7\text{ m}^2/\text{s}^2} \approx 3.516 \times 10^3\text{ m/s}

  2. Wavelength of the fundamental mode in the rod: When a rod is clamped at its midpoint, the center is held stationary (a displacement node), while both free ends oscillate freely (displacement antinodes).

    For the fundamental longitudinal mode, the rod contains two quarter-wavelength segments (one between the midpoint and each end), making the total rod length equal to half a wavelength: Lrod=λrod2  ⟹  λrod=2Lrod=2(1.000 m)=2.000 mL_{\text{rod}} = \frac{\lambda_{\text{rod}}}{2} \implies \lambda_{\text{rod}} = 2 L_{\text{rod}} = 2(1.000\text{ m}) = 2.000\text{ m}

  3. Fundamental frequency ff: Using the wave relation v=fλv = f \lambda: f=vrodλrod=3515.6 m/s2.000 m≈1758 Hz≈1760 Hzf = \frac{v_{\text{rod}}}{\lambda_{\text{rod}}} = \frac{3515.6\text{ m/s}}{2.000\text{ m}} \approx 1758\text{ Hz} \approx 1760\text{ Hz}

Part (b): Speed of Sound in the Argon Gas

  1. Wavelength in the gas: The vibrating rod excites standing acoustic waves inside the Kundt's tube at the same frequency ff. Fine powder collects at displacement nodes, where the amplitude of gas motion is minimal.

    The distance between any two adjacent displacement nodes is equal to half an acoustic wavelength, λgas2\frac{\lambda_{\text{gas}}}{2}.

    Common Pitfall: A count of nn consecutive nodes defines n−1n - 1 spatial intervals, not nn intervals.

    For 66 consecutive nodes, there are 6−1=56 - 1 = 5 half-wavelength intervals: Δx6=5(λgas2)\Delta x_6 = 5\left(\frac{\lambda_{\text{gas}}}{2}\right)

    Solving for λgas\lambda_{\text{gas}}: λgas=2 Δx65=2(0.725 m)5=1.450 m5=0.290 m\lambda_{\text{gas}} = \frac{2\,\Delta x_6}{5} = \frac{2(0.725\text{ m})}{5} = \frac{1.450\text{ m}}{5} = 0.290\text{ m}

  2. Speed of sound vgasv_{\text{gas}}: Using the resonance frequency f≈1758 Hzf \approx 1758\text{ Hz} (or 1760 Hz1760\text{ Hz} rounded): vgas=f⋅λgas=1758 Hz×0.290 m≈510 m/sv_{\text{gas}} = f \cdot \lambda_{\text{gas}} = 1758\text{ Hz} \times 0.290\text{ m} \approx 510\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides the distance across 6 consecutive nodes by 6 intervals instead of 5, leading to an underestimated wavelength and sound speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vrod=Yρ=1.10×10118.90×103=3515.6 m/sv_{\text{rod}} = \sqrt{\frac{Y}{\rho}} = \sqrt{\frac{1.10 \times 10^{11}}{8.90 \times 10^3}} = 3515.6\text{ m/s}

  2. Step 2

    λrod=2Lrod=2(1.000)=2.000 m  ⟹  f=vrodλrod=3515.62.000=1758 Hz\lambda_{\text{rod}} = 2 L_{\text{rod}} = 2(1.000) = 2.000\text{ m} \implies f = \frac{v_{\text{rod}}}{\lambda_{\text{rod}}} = \frac{3515.6}{2.000} = 1758\text{ Hz}

  3. Step 3

    6 intervals=0.725 m  ⟹  λgas2=0.7256=0.1208 m  ⟹  λgas=0.2417 m6\text{ intervals} = 0.725\text{ m} \implies \frac{\lambda_{\text{gas}}}{2} = \frac{0.725}{6} = 0.1208\text{ m} \implies \lambda_{\text{gas}} = 0.2417\text{ m}

    Correct

    5(λgas2)=0.725 m  ⟹  λgas=2(0.725 m)5=0.290 m5\left(\frac{\lambda_{\text{gas}}}{2}\right) = 0.725\text{ m} \implies \lambda_{\text{gas}} = \frac{2(0.725\text{ m})}{5} = 0.290\text{ m}

    A series of nn consecutive nodes contains n−1n - 1 spaces between them, not nn. For 66 nodes, there are 6−1=56 - 1 = 5 half-wavelength intervals, so 5(λgas2)=0.725 m5\left(\frac{\lambda_{\text{gas}}}{2}\right) = 0.725\text{ m}.

  4. Step 4

    vgas=fλgas=1758×0.2417=425 m/sv_{\text{gas}} = f \lambda_{\text{gas}} = 1758 \times 0.2417 = 425\text{ m/s}

    Correct

    vgas=fλgas=1758 Hz×0.290 m≈510 m/sv_{\text{gas}} = f \lambda_{\text{gas}} = 1758\text{ Hz} \times 0.290\text{ m} \approx 510\text{ m/s}

    Your formula v=fλv = f \lambda is correct, but the numerical answer inherits the underestimated wavelength from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the longitudinal wave speed in the metal rod from its Young's modulus and density.

You correctly identified that the midpoint-clamped fundamental mode corresponds to Lrod=λrod2L_{\text{rod}} = \frac{\lambda_{\text{rod}}}{2}.

You applied the wave relationship v=fλv = f \lambda accurately in both parts.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Fencepost counting error in acoustic standing wave intervals

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the count of discrete node markers (nn) with the number of spatial intervals between them (n−1n - 1). In any standing wave, nn consecutive nodes encompass exactly n−1n - 1 half-wavelength intervals.

REASONING PATH
Your ACEpath teacher’s suggested approach
Node-to-Interval Counting Rule (Fencepost Principle)
  • The distance between adjacent nodes is λ2\frac{\lambda}{2}. Therefore, nn consecutive nodes span (n−1)(n - 1) intervals of length λ2\frac{\lambda}{2}, giving total distance Δx=(n−1)λ2\Delta x = (n - 1)\frac{\lambda}{2}.

  • Always count the spaces between the points rather than the points themselves. Sketch or label the nodes 1,2,…,n1, 2, \dots, n and verify that the number of segments is n−1n - 1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the number of half-wavelength intervals: N=6−1=5N = 6 - 1 = 5.

  2. Set up the relation between distance and wavelength: Δx6=5(λgas2)=0.725 m\Delta x_6 = 5 \left(\frac{\lambda_{\text{gas}}}{2}\right) = 0.725\text{ m}.

  3. Solve for the wavelength in the gas: λgas=2×0.725 m5=0.290 m\lambda_{\text{gas}} = \frac{2 \times 0.725\text{ m}}{5} = 0.290\text{ m}.

  4. Calculate the sound speed in argon: vgas=fλgas=1758 Hz×0.290 m≈510 m/sv_{\text{gas}} = f \lambda_{\text{gas}} = 1758\text{ Hz} \times 0.290\text{ m} \approx 510\text{ m/s}.

Final answer

(a) f≈1760 Hzf \approx 1760\text{ Hz}; (b) vgas≈510 m/sv_{\text{gas}} \approx 510\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fencepost principle for standing wave measurements (nodes, antinodes, and dust heaps).

  • Work through the flashcards below to lock in the relationship between marker count and spatial intervals.

  • Complete the targeted practice problems to practice extracting acoustic wavelengths correctly.

OverviewACEpath Teacher's Diagnosis

02 The student treats the center-clamped rod as fixed-free with fundamental wavelength λ = 4L instead of λ = 2L, halving the calculated frequency and resulting speed of sound.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vrod=Yρ=1.10×10118.90×103  ⟹  vrod=3515.6 m/sv_{\text{rod}} = \sqrt{\frac{Y}{\rho}} = \sqrt{\frac{1.10 \times 10^{11}}{8.90 \times 10^3}} \implies v_{\text{rod}} = 3515.6\text{ m/s}

  2. Step 2

    λrod=4Lrod=4(1.000)=4.000 m\lambda_{\text{rod}} = 4 L_{\text{rod}} = 4(1.000) = 4.000\text{ m}

    Correct

    λrod=2Lrod=2(1.000 m)=2.000 m\lambda_{\text{rod}} = 2 L_{\text{rod}} = 2(1.000\text{ m}) = 2.000\text{ m}

    A rod clamped at its midpoint has a displacement node at the center and displacement antinodes at both free ends. In the fundamental longitudinal mode, the rod spans half a wavelength (L=λ/2L = \lambda / 2), so λ=2L\lambda = 2L, not 4L4L.

  3. Step 3

    f=vrodλrod=3515.64.000=879 Hzf = \frac{v_{\text{rod}}}{\lambda_{\text{rod}}} = \frac{3515.6}{4.000} = 879\text{ Hz}

    Correct

    f=vrodλrod=3515.6 m/s2.000 m≈1758 Hz≈1760 Hzf = \frac{v_{\text{rod}}}{\lambda_{\text{rod}}} = \frac{3515.6\text{ m/s}}{2.000\text{ m}} \approx 1758\text{ Hz} \approx 1760\text{ Hz}

    Your division and wave formula are correct, but the numerical result is halved due to using λrod=4.000 m\lambda_{\text{rod}} = 4.000\text{ m}.

  4. Step 4

    5 intervals=0.725 m  ⟹  λgas2=0.7255=0.145 m  ⟹  λgas=0.290 m5\text{ intervals} = 0.725\text{ m} \implies \frac{\lambda_{\text{gas}}}{2} = \frac{0.725}{5} = 0.145\text{ m} \implies \lambda_{\text{gas}} = 0.290\text{ m}

  5. Step 5

    vgas=fλgas=879×0.290=255 m/sv_{\text{gas}} = f \lambda_{\text{gas}} = 879 \times 0.290 = 255\text{ m/s}

    Correct

    vgas=fλgas=1758 Hz×0.290 m≈510 m/sv_{\text{gas}} = f \lambda_{\text{gas}} = 1758\text{ Hz} \times 0.290\text{ m} \approx 510\text{ m/s}

    Your method of multiplying frequency by acoustic wavelength is correct, but your final speed is half the expected value because of the earlier frequency error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Young's modulus and density to compute the longitudinal wave speed in the rod.

You correctly identified that 6 consecutive dust nodes represent 5 half-wavelength intervals.

You correctly related wave speed, frequency, and wavelength.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Boundary Conditions for Center-Clamped Rod

You used the quarter-wavelength formula λ=4L\lambda = 4L (valid for a rod fixed at one end and free at the other) rather than the half-wavelength formula λ=2L\lambda = 2L for a rod clamped at its center.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the boundary condition of a rod clamped at one end (node at end, antinode at other end   ⟹  L=λ/4\implies L = \lambda/4) with a rod clamped at the midpoint (node at center, antinodes at both ends   ⟹  L=λ/4+λ/4=λ/2\implies L = \lambda/4 + \lambda/4 = \lambda/2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify clamping points as displacement nodes
  • Any clamped location is a displacement node (NN), while free ends are displacement antinodes (AA).

  • Sketch the rod with NN at the center and AA at both ends. Sum the segments: distance from center to each end is L/2=λ/4L/2 = \lambda/4, so total length L=λ/2L = \lambda/2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the fundamental mode condition for a rod clamped at its midpoint: Lrod=λrod2  ⟹  λrod=2Lrod=2(1.000 m)=2.000 mL_{\text{rod}} = \frac{\lambda_{\text{rod}}}{2} \implies \lambda_{\text{rod}} = 2 L_{\text{rod}} = 2(1.000\text{ m}) = 2.000\text{ m}.

  2. Recalculate the resonance frequency: f=vrodλrod=3515.6 m/s2.000 m≈1758 Hz≈1760 Hzf = \frac{v_{\text{rod}}}{\lambda_{\text{rod}}} = \frac{3515.6\text{ m/s}}{2.000\text{ m}} \approx 1758\text{ Hz} \approx 1760\text{ Hz}.

  3. Compute the speed of sound in the gas using the correct frequency: vgas=fλgas=1758 Hz×0.290 m≈510 m/sv_{\text{gas}} = f \lambda_{\text{gas}} = 1758\text{ Hz} \times 0.290\text{ m} \approx 510\text{ m/s}.

Final answer

(a) f=1760 Hzf = 1760\text{ Hz}; (b) vgas=510 m/sv_{\text{gas}} = 510\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the standing wave pattern for vibrating rods by marking nodes (NN) at clamps and antinodes (AA) at free ends before writing λ\lambda in terms of LL.

  • Verify that a symmetric rod with free ends must have an antinode-node-antinode structure for its fundamental mode, giving L=λ/2L = \lambda/2.

OverviewACEpath Teacher's Diagnosis

03 The student mistakes the distance between consecutive nodes for a full wavelength rather than a half-wavelength, doubling the computed sound speed in the gas.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vrod=Yρ=1.10×10118.90×103  ⟹  vrod=3515.6 m/sv_{\text{rod}} = \sqrt{\frac{Y}{\rho}} = \sqrt{\frac{1.10 \times 10^{11}}{8.90 \times 10^3}} \implies v_{\text{rod}} = 3515.6\text{ m/s}

  2. Step 2

    λrod=2Lrod=2(1.000)=2.000 m  ⟹  f=vrodλrod=3515.62.000=1758 Hz\lambda_{\text{rod}} = 2 L_{\text{rod}} = 2(1.000) = 2.000\text{ m} \implies f = \frac{v_{\text{rod}}}{\lambda_{\text{rod}}} = \frac{3515.6}{2.000} = 1758\text{ Hz}

  3. Step 3

    Number of spaces=6−1=5  ⟹  d=0.7255=0.145 m\text{Number of spaces} = 6 - 1 = 5 \implies d = \frac{0.725}{5} = 0.145\text{ m}

  4. Step 4

    vgas=fλgas=1758×0.580=1020 m/sv_{\text{gas}} = f \lambda_{\text{gas}} = 1758 \times 0.580 = 1020\text{ m/s}

    Correct

    λgas=2×0.145 m=0.290 m  ⟹  vgas=fλgas=1758 Hz×0.290 m≈510 m/s\lambda_{\text{gas}} = 2 \times 0.145\text{ m} = 0.290\text{ m} \implies v_{\text{gas}} = f \lambda_{\text{gas}} = 1758\text{ Hz} \times 0.290\text{ m} \approx 510\text{ m/s}

    In a standing wave, the distance between two consecutive displacement nodes is half a wavelength (λ2\frac{\lambda}{2}), not a quarter wavelength (λ4\frac{\lambda}{4}). Multiplying 0.145 m0.145\text{ m} by 44 gave λgas=0.580 m\lambda_{\text{gas}} = 0.580\text{ m} instead of 2×0.145 m=0.290 m2 \times 0.145\text{ m} = 0.290\text{ m}, doubling your calculated speed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Young's modulus and density to find the longitudinal wave speed in the rod.

You accurately determined the fundamental wavelength and resonant frequency of the center-clamped rod.

You correctly recognized that 66 consecutive nodes enclose 55 spaces and calculated the distance of one space as 0.145 m0.145\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Acoustic Node Spacing Relation

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the distance between consecutive nodes (λ2\frac{\lambda}{2}) with the distance between a node and an adjacent antinode (λ4\frac{\lambda}{4}), multiplying the inter-nodal distance by 4 instead of 2 to obtain the wavelength.

REASONING PATH
Your ACEpath teacher’s suggested approach
Standing Wave Geometry
  • Consecutive nodes (or consecutive antinodes) are separated by λ2\frac{\lambda}{2}. Only adjacent node-to-antinode spacing is λ4\frac{\lambda}{4}.

  • Whenever you measure the distance dd between neighboring dust heaps in a Kundt's tube, set λ=2d\lambda = 2d.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the distance between adjacent nodes equal to half a wavelength: λgas2=0.145 m\frac{\lambda_{\text{gas}}}{2} = 0.145\text{ m}.

  2. Solve for the wavelength: λgas=2×0.145 m=0.290 m\lambda_{\text{gas}} = 2 \times 0.145\text{ m} = 0.290\text{ m}.

  3. Calculate the speed of sound: vgas=fλgas=1758 Hz×0.290 m≈510 m/sv_{\text{gas}} = f \lambda_{\text{gas}} = 1758\text{ Hz} \times 0.290\text{ m} \approx 510\text{ m/s}.

Final answer

(a) f=1760 Hzf = 1760\text{ Hz}; (b) vgas=510 m/sv_{\text{gas}} = 510\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch one full cycle of a sinusoidal standing wave and label the nodes and antinodes to visually verify that two adjacent nodes span half a cycle.

  • Practice converting node counts and total lengths into acoustic wavelengths using the general relation L=(n−1)λ2L = (n - 1)\frac{\lambda}{2}.

Lock it in

Similar question

01

In a Kundt's tube experiment driven by an audio oscillator at f=2500 Hzf = 2500\text{ Hz}, fine powder forms distinct heaps. The distance measured between the 1st node and the 9th node is 54.4 cm54.4\text{ cm}. Calculate: (a) the acoustic wavelength λ\lambda, and (b) the speed of sound in the gas.

Answer

(a) The number of intervals between the 1st and 9th node is 9−1=89 - 1 = 8. Thus, 8(λ2)=0.544 m  ⟹  4λ=0.544 m  ⟹  λ=0.136 m8\left(\frac{\lambda}{2}\right) = 0.544\text{ m} \implies 4\lambda = 0.544\text{ m} \implies \lambda = 0.136\text{ m}. (b) Speed of sound: v=fλ=2500 Hz×0.136 m=340 m/sv = f\lambda = 2500\text{ Hz} \times 0.136\text{ m} = 340\text{ m/s}.

02

A brass rod of length L=1.20 mL = 1.20\text{ m} is clamped at its center and excited into its fundamental longitudinal mode (vbrass=3600 m/sv_{\text{brass}} = 3600\text{ m/s}). One end extends into a Kundt's tube filled with carbon dioxide gas (vgas=270 m/sv_{\text{gas}} = 270\text{ m/s}). Determine the distance between 5 consecutive dust nodes inside the tube.

Answer
  1. Fundamental wavelength of the rod: λrod=2L=2(1.20 m)=2.40 m\lambda_{\text{rod}} = 2L = 2(1.20\text{ m}) = 2.40\text{ m}.
  2. Resonance frequency: f=vbrassλrod=3600 m/s2.40 m=1500 Hzf = \frac{v_{\text{brass}}}{\lambda_{\text{rod}}} = \frac{3600\text{ m/s}}{2.40\text{ m}} = 1500\text{ Hz}.
  3. Wavelength in CO2\text{CO}_2: λgas=vgasf=270 m/s1500 Hz=0.180 m\lambda_{\text{gas}} = \frac{v_{\text{gas}}}{f} = \frac{270\text{ m/s}}{1500\text{ Hz}} = 0.180\text{ m}.
  4. Distance across 5 consecutive nodes corresponds to 5−1=45 - 1 = 4 intervals: Δx=4(λgas2)=2λgas=2(0.180 m)=0.360 m\Delta x = 4\left(\frac{\lambda_{\text{gas}}}{2}\right) = 2 \lambda_{\text{gas}} = 2(0.180\text{ m}) = 0.360\text{ m} (or 36.0 cm36.0\text{ cm}).
03

In a standing wave apparatus, a detector moves along the axis and identifies positions of maximum acoustic pressure (pressure antinodes, which correspond to displacement nodes). The 2nd pressure antinode is detected at x2=18.5 cmx_2 = 18.5\text{ cm} and the 7th pressure antinode is detected at x7=63.5 cmx_7 = 63.5\text{ cm}. If the frequency of the sound source is 1900 Hz1900\text{ Hz}, find the speed of sound and determine the distance between any pressure antinode and its adjacent pressure node.

Answer
  1. Number of intervals between the 2nd and 7th antinodes: 7−2=57 - 2 = 5 intervals.
  2. Total span: Δx=63.5 cm−18.5 cm=45.0 cm=0.450 m\Delta x = 63.5\text{ cm} - 18.5\text{ cm} = 45.0\text{ cm} = 0.450\text{ m}.
  3. Half-wavelength: λ2=0.450 m5=0.090 m  ⟹  λ=0.180 m\frac{\lambda}{2} = \frac{0.450\text{ m}}{5} = 0.090\text{ m} \implies \lambda = 0.180\text{ m}.
  4. Speed of sound: v=fλ=1900 Hz×0.180 m=342 m/sv = f\lambda = 1900\text{ Hz} \times 0.180\text{ m} = 342\text{ m/s}.
  5. Distance between an antinode and an adjacent node is one quarter-wavelength: d=λ4=0.180 m4=0.045 m=4.5 cmd = \frac{\lambda}{4} = \frac{0.180\text{ m}}{4} = 0.045\text{ m} = 4.5\text{ cm}.
Loading workspace…