Resources

A scientific satellite of mass m=650 kgm = 650\text{ kg} is initially deployed in a circular low Earth parking orbit of radius r1=6.80×106 mr_1 = 6.80 \times 10^6\text{ m}. Mission control commands a brief engine burn to transfer the satellite into an outer circular observation orbit of radius r2=1.36×107 mr_2 = 1.36 \times 10^7\text{ m}. Earth's mass is M=5.972×1024 kgM = 5.972 \times 10^{24}\text{ kg} and G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2. Determine (a) the change in the satellite's gravitational potential energy ΔU\Delta U, (b) the change in its kinetic energy ΔK\Delta K, and (c) the minimum total mechanical work WextW_{\text{ext}} required to transition between the two orbits.

Answer and steps

Final answer

(a) ΔU=+1.91×1010 J\Delta U = +1.91 \times 10^{10}\text{ J}; (b) ΔK=−9.53×109 J\Delta K = -9.53 \times 10^9\text{ J}; (c) Wext=+9.53×109 JW_{\text{ext}} = +9.53 \times 10^9\text{ J}

Steps

Part (a): Change in Gravitational Potential Energy (ΔU\Delta U)

The gravitational potential energy of a satellite of mass mm orbiting a body of mass MM at an orbital radius rr is given by: U=−GMmrU = -\frac{GMm}{r}

The change in gravitational potential energy when moving from radius r1r_1 to radius r2r_2 is: ΔU=U2−U1=−GMmr2−(−GMmr1)=GMm(1r1−1r2)\Delta U = U_2 - U_1 = -\frac{GMm}{r_2} - \left(-\frac{GMm}{r_1}\right) = GMm\left(\frac{1}{r_1} - \frac{1}{r_2}\right)

Notice that r2=1.36×107 m=2r1r_2 = 1.36 \times 10^7\text{ m} = 2r_1, which gives: 1r1−1r2=16.80×106 m−11.36×107 m=11.36×107 m≈7.353×10−8 m−1\frac{1}{r_1} - \frac{1}{r_2} = \frac{1}{6.80 \times 10^6\text{ m}} - \frac{1}{1.36 \times 10^7\text{ m}} = \frac{1}{1.36 \times 10^7\text{ m}} \approx 7.353 \times 10^{-8}\text{ m}^{-1}

Calculate the product GMmGMm: GMm=(6.674×10−11 N⋅m2/kg2)⋅(5.972×1024 kg)⋅(650 kg)≈2.591×1017 J⋅mGMm = (6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2) \cdot (5.972 \times 10^{24}\text{ kg}) \cdot (650\text{ kg}) \approx 2.591 \times 10^{17}\text{ J}\cdot\text{m}

Substitute this value to find ΔU\Delta U: ΔU=(2.591×1017 J⋅m)⋅(7.353×10−8 m−1)≈+1.91×1010 J\Delta U = (2.591 \times 10^{17}\text{ J}\cdot\text{m}) \cdot (7.353 \times 10^{-8}\text{ m}^{-1}) \approx +1.91 \times 10^{10}\text{ J}

(Pitfall note: Potential energy in a gravitational well increases, becoming less negative, as the satellite moves farther away from the planet. Therefore, ΔU\Delta U must be positive.)


Part (b): Change in Kinetic Energy (ΔK\Delta K)

For a satellite in a circular orbit, gravity provides the necessary centripetal force: GMmr2=mv2r  ⟹  mv2=GMmr\frac{GMm}{r^2} = \frac{mv^2}{r} \implies mv^2 = \frac{GMm}{r}

The orbital kinetic energy KK is: K=12mv2=GMm2r=−12UK = \frac{1}{2}mv^2 = \frac{GMm}{2r} = -\frac{1}{2}U

Because kinetic energy is inversely proportional to radius, moving to a higher orbit decreases orbital speed. The change in kinetic energy is: ΔK=K2−K1=−12ΔU\Delta K = K_2 - K_1 = -\frac{1}{2}\Delta U

Substituting the value of ΔU\Delta U: ΔK=−12(+1.905×1010 J)≈−9.53×109 J\Delta K = -\frac{1}{2}(+1.905 \times 10^{10}\text{ J}) \approx -9.53 \times 10^9\text{ J}


Part (c): Minimum Total Mechanical Work (WextW_{\text{ext}})

According to the work-energy theorem, the total external mechanical work required to move the satellite between the two circular orbits equals the change in total mechanical energy ΔE\Delta E: Wext=ΔE=ΔK+ΔUW_{\text{ext}} = \Delta E = \Delta K + \Delta U

Using the relationship ΔK=−12ΔU\Delta K = -\frac{1}{2}\Delta U: Wext=−12ΔU+ΔU=12ΔUW_{\text{ext}} = -\frac{1}{2}\Delta U + \Delta U = \frac{1}{2}\Delta U

Substituting the calculated value: Wext=12(+1.905×1010 J)≈+9.53×109 JW_{\text{ext}} = \frac{1}{2}(+1.905 \times 10^{10}\text{ J}) \approx +9.53 \times 10^9\text{ J}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the negative sign in the gravitational potential energy formula U = -G*M*m/r, leading to an incorrect negative change in potential energy when moving to a higher orbit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    U = GMm/r   ⟹  \implies GMm = (6.674 ×\times 10^{-11})(5.972 ×\times 10^{24})(650) = 2.59 ×\times 10^{17}\text{ J}$$\cdot$$\text{m}   ⟹  \implies Δ\Delta U = GMm(1/r_2 - 1/r_1) = 2.59 ×\times 10^{17}(11.36×107−16.80×106)\left(\frac{1}{1.36 \times 10^7} - \frac{1}{6.80 \times 10^6}\right) = -1.90 ×\times 10^{10} J\text{ J}

    Correct

    U = -GMmr\frac{GMm}{r}   ⟹  \implies Δ\Delta U = -GMm(1r2−1r1)\left(\frac{1}{r_2} - \frac{1}{r_1}\right) = GMm(1r1−1r2)\left(\frac{1}{r_1} - \frac{1}{r_2}\right) ≈\approx +1.91 ×\times 10^{10} J\text{ J}

    Gravitational potential energy with the standard reference at infinity is strictly negative: U(r)=−GMmrU(r) = -\frac{GMm}{r}. When a satellite moves to a larger radius, it climbs out of the gravitational potential well, so its potential energy must increase (ΔU>0\Delta U > 0).

  2. Step 2

    v^2 = GM/r   ⟹  \implies K = 12\frac{1}{2}mv^2 = G∗M∗m2∗r\frac{G*M*m}{2*r}   ⟹  \implies Δ\Delta K = (G∗M∗m2)\left(\frac{G*M*m}{2}\right)(1r2−1r1)\left(\frac{1}{r_2} - \frac{1}{r_1}\right) = (2.59×10172)\left(\frac{2.59 \times 10^{17}}{2}\right)*(11.36×107−16.80×106)\left(\frac{1}{1.36 \times 10^7} - \frac{1}{6.80 \times 10^6}\right) = -9.52 ×\times 10^9 J\text{ J}

  3. Step 3

    W_{ext\text{ext}} = Δ\Delta K + Δ\Delta U = -9.52 ×\times 10^9 J\text{ J} + (-1.90 ×\times 10^{10} J\text{ J}) = -2.85 ×\times 10^{10} J\text{ J}_

    Correct

    W_{ext\text{ext}} = Δ\Delta E = Δ\Delta K + Δ\Delta U = -9.53 ×\times 10^9 J\text{ J} + 1.91 ×\times 10^{10} J\text{ J} ≈\approx +9.53 ×\times 10^9 J\text{ J}_

    Your work-energy relation Wext=ΔK+ΔUW_{\text{ext}} = \Delta K + \Delta U is conceptually sound, but substituting the incorrect negative ΔU\Delta U from Step 1 caused the final work to become negative instead of positive.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the circular orbital speed and kinetic energy expressions from Newton's second law and universal gravitation.

You accurately computed the numerical product GMm=2.59×1017 J⋅mGMm = 2.59 \times 10^{17}\text{ J}\cdot\text{m}.

You correctly identified that the external work required equals the total mechanical energy change ΔE=ΔK+ΔU\Delta E = \Delta K + \Delta U.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing negative sign in gravitational potential energy

You wrote U=GMmrU = \frac{GMm}{r} instead of U=−GMmrU = -\frac{GMm}{r}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing gravitational force magnitude or local potential energy conventions with the universal reference U(∞)=0U(\infty) = 0, where gravitational bound states always carry negative potential energy that increases toward zero as separation distance grows.

REASONING PATH
Your ACEpath teacher’s suggested approach
Universal Potential Energy Definition
  • With zero potential chosen at infinity (r→∞r \to \infty), universal gravitational potential energy is U(r)=−GMmrU(r) = -\frac{GMm}{r}.

  • Always verify that U(r)U(r) is negative for finite radii and that moving to an outer orbit (r2>r1r_2 > r_1) results in a positive change: ΔU=U2−U1>0\Delta U = U_2 - U_1 > 0.

Virial Theorem for Circular Orbits
  • For any circular orbit under an inverse-square force, K=−12UK = -\frac{1}{2}U, which means ΔK=−12ΔU\Delta K = -\frac{1}{2}\Delta U and ΔE=12ΔU=−ΔK\Delta E = \frac{1}{2}\Delta U = -\Delta K.

  • Use the relation ΔE=−ΔK>0\Delta E = -\Delta K > 0 as a quick sanity check: reaching a higher orbit requires positive net energy input even though the satellite slows down.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard potential energy definition: U=−GMmrU = -\frac{GMm}{r}.

  2. Compute ΔU=−GMmr2−(−GMmr1)=GMm(1r1−1r2)=(2.591×1017)(16.80×106−11.36×107)≈+1.91×1010 J\Delta U = -\frac{GMm}{r_2} - \left(-\frac{GMm}{r_1}\right) = GMm\left(\frac{1}{r_1} - \frac{1}{r_2}\right) = (2.591 \times 10^{17})\left(\frac{1}{6.80 \times 10^6} - \frac{1}{1.36 \times 10^7}\right) \approx +1.91 \times 10^{10}\text{ J}.

  3. Combine with your correct ΔK=−9.53×109 J\Delta K = -9.53 \times 10^9\text{ J}: Wext=ΔK+ΔU=−9.53×109 J+1.91×1010 J=+9.53×109 JW_{\text{ext}} = \Delta K + \Delta U = -9.53 \times 10^9\text{ J} + 1.91 \times 10^{10}\text{ J} = +9.53 \times 10^9\text{ J}.

Final answer

(a) ΔU=+1.91×1010 J\Delta U = +1.91 \times 10^{10}\text{ J}; (b) ΔK=−9.53×109 J\Delta K = -9.53 \times 10^9\text{ J}; (c) Wext=+9.53×109 JW_{\text{ext}} = +9.53 \times 10^9\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the sign convention U=−GMmrU = -\frac{GMm}{r} by remembering that gravity is attractive, so you must add energy to separate two masses.

  • Perform a physical sign check: moving to an orbit farther away from a planet always requires positive external work (Wext>0W_{\text{ext}} > 0).

OverviewACEpath Teacher's Diagnosis

02 The student assumes that orbital speed must increase to reach a higher orbit and computes ΔK = K_1 - K_2 with the wrong sign or treats kinetic energy change as positive.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    U=−GMmr  ⟹  ΔU=−GMm(1r2−1r1)  ⟹  GMm=2.59×1017 J⋅m  ⟹  ΔU=2.59×1017(16.80×106−11.36×107)=1.90×1010 JU = -\frac{GMm}{r} \implies \Delta U = -GMm\left(\frac{1}{r_2} - \frac{1}{r_1}\right) \implies GMm = 2.59 \times 10^{17}\text{ J}\cdot\text{m} \implies \Delta U = 2.59 \times 10^{17}\left(\frac{1}{6.80 \times 10^6} - \frac{1}{1.36 \times 10^7}\right) = 1.90 \times 10^{10}\text{ J}

  2. Step 2

    K=GMm2r  ⟹  Satellite speeds up to higher orbit so ΔK is positive  ⟹  ΔK=(GMm2)(1r1−1r2)=9.52×109 JK = \frac{GMm}{2r} \implies \text{Satellite speeds up to higher orbit so } \Delta K \text{ is positive} \implies \Delta K = \left(\frac{GMm}{2}\right)\left(\frac{1}{r_1} - \frac{1}{r_2}\right) = 9.52 \times 10^9\text{ J}

    Correct

    ΔK=K2−K1=GMm2(1r2−1r1)=−12ΔU≈−9.53×109 J\Delta K = K_2 - K_1 = \frac{GMm}{2}\left(\frac{1}{r_2} - \frac{1}{r_1}\right) = -\frac{1}{2}\Delta U \approx -9.53 \times 10^9\text{ J}

    For a stable circular orbit, the orbital speed is v=GMrv = \sqrt{\frac{GM}{r}}, meaning satellites travel more slowly at larger orbital radii. Therefore, kinetic energy decreases as orbital radius increases, making ΔK=K2−K1<0\Delta K = K_2 - K_1 < 0.

  3. Step 3

    Wext=ΔK+ΔU=9.52×109 J+1.90×1010 J=2.85×1010 JW_{\text{ext}} = \Delta K + \Delta U = 9.52 \times 10^9\text{ J} + 1.90 \times 10^{10}\text{ J} = 2.85 \times 10^{10}\text{ J}

    Correct

    Wext=ΔK+ΔU=−9.53×109 J+1.91×1010 J=+9.53×109 JW_{\text{ext}} = \Delta K + \Delta U = -9.53 \times 10^9\text{ J} + 1.91 \times 10^{10}\text{ J} = +9.53 \times 10^9\text{ J}

    You correctly applied the work-energy theorem Wext=ΔK+ΔUW_{\text{ext}} = \Delta K + \Delta U, but this result was affected by the incorrect positive sign of ΔK\Delta K from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct expression for gravitational potential energy U=−GMmrU = -\frac{GMm}{r} and properly calculated the positive increase in potential energy.

You correctly recalled the formula for orbital kinetic energy K=GMm2rK = \frac{GMm}{2r}.

You correctly related external work to the total change in mechanical energy using Wext=ΔK+ΔUW_{\text{ext}} = \Delta K + \Delta U.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Orbital speed-radius relationship sign inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You believed that moving to a higher orbit requires moving faster in the final circular orbit. In reality, circular orbital speed satisfies v=GM/rv = \sqrt{GM/r}, so satellites in higher orbits move slower than satellites in lower orbits.

REASONING PATH
Your ACEpath teacher’s suggested approach
Circular Orbital Speed
  • From mv2r=GMmr2\frac{mv^2}{r} = \frac{GMm}{r^2}, orbital speed is v=GMrv = \sqrt{\frac{GM}{r}}, which decreases as radius increases.

  • Always check whether the final state has a larger radius (r2>r1r_2 > r_1); if so, orbital kinetic energy must decrease (K2<K1K_2 < K_1).

Virial Theorem for Circular Orbits
  • K=−12UK = -\frac{1}{2}U, so ΔK=−12ΔU\Delta K = -\frac{1}{2}\Delta U and ΔE=12ΔU\Delta E = \frac{1}{2}\Delta U.

  • Use the sign flip ΔK=−12ΔU\Delta K = -\frac{1}{2}\Delta U directly to ensure consistent signs.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Since r2>r1r_2 > r_1, kinetic energy decreases: ΔK=K2−K1=GMm2(1r2−1r1)\Delta K = K_2 - K_1 = \frac{GMm}{2}\left(\frac{1}{r_2} - \frac{1}{r_1}\right).

  2. Substitute values: ΔK=−12ΔU=−12(1.905×1010 J)≈−9.53×109 J\Delta K = -\frac{1}{2}\Delta U = -\frac{1}{2}(1.905 \times 10^{10}\text{ J}) \approx -9.53 \times 10^9\text{ J}.

  3. Compute external work: Wext=ΔK+ΔU=−9.53×109 J+1.905×1010 J=+9.53×109 JW_{\text{ext}} = \Delta K + \Delta U = -9.53 \times 10^9\text{ J} + 1.905 \times 10^{10}\text{ J} = +9.53 \times 10^9\text{ J}.

Final answer

(a) ΔU=+1.91×1010 J\Delta U = +1.91 \times 10^{10}\text{ J}; (b) ΔK=−9.53×109 J\Delta K = -9.53 \times 10^9\text{ J}; (c) Wext=+9.53×109 JW_{\text{ext}} = +9.53 \times 10^9\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how orbital velocity varies inversely with the square root of radius by balancing gravitational and centripetal forces.

  • Practice using the relation ΔK=−12ΔU\Delta K = -\frac{1}{2}\Delta U for circular orbits to avoid sign errors.

OverviewACEpath Teacher's Diagnosis

03 The student ignores the kinetic energy change and equates the external work solely to the change in gravitational potential energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    U=−GMmr  ⟹  ΔU=−GMm(1r2−1r1)  ⟹  GMm=2.59×1017 J⋅m  ⟹  ΔU=2.59×1017(16.80×106−11.36×107)  ⟹  ΔU=1.90×1010 JU = -\frac{GMm}{r} \implies \Delta U = -GMm\left(\frac{1}{r_2} - \frac{1}{r_1}\right) \implies GMm = 2.59 \times 10^{17}\text{ J}\cdot\text{m} \implies \Delta U = 2.59 \times 10^{17}\left(\frac{1}{6.80 \times 10^6} - \frac{1}{1.36 \times 10^7}\right) \implies \Delta U = 1.90 \times 10^{10}\text{ J}

  2. Step 2

    v2=GMr  ⟹  K=GMm2r  ⟹  ΔK=(GMm2)(1r2−1r1)  ⟹  ΔK=−9.52×109 Jv^2 = \frac{GM}{r} \implies K = \frac{GMm}{2r} \implies \Delta K = \left(\frac{GMm}{2}\right)\left(\frac{1}{r_2} - \frac{1}{r_1}\right) \implies \Delta K = -9.52 \times 10^9\text{ J}

  3. Step 3

    Wext=ΔU  ⟹  Wext=1.90×1010 JW_{\text{ext}} = \Delta U \implies W_{\text{ext}} = 1.90 \times 10^{10}\text{ J}

    Correct

    Wext=ΔE=ΔK+ΔU=−9.53×109 J+1.91×1010 J=+9.53×109 JW_{\text{ext}} = \Delta E = \Delta K + \Delta U = -9.53 \times 10^9\text{ J} + 1.91 \times 10^{10}\text{ J} = +9.53 \times 10^9\text{ J}

    You equated external work only to the change in potential energy, but transitioning between circular orbits also changes the satellite's kinetic energy. By the work-energy theorem, external work equals the total mechanical energy change, Wext=ΔE=ΔK+ΔUW_{\text{ext}} = \Delta E = \Delta K + \Delta U.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the change in gravitational potential energy ΔU\Delta U.

You properly used circular orbital mechanics to find the orbital kinetic energy and its change ΔK\Delta K.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of kinetic energy in orbital work

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the work required for an orbital transfer like lifting an object quasi-statically at constant speed near Earth's surface (W=ΔUW = \Delta U), overlooking that the satellite's orbital speed and kinetic energy change simultaneously as orbital radius changes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Work-Energy Theorem for Orbital Transfers
  • External non-conservative work changes the total mechanical energy: Wext=ΔE=ΔK+ΔUW_{\text{ext}} = \Delta E = \Delta K + \Delta U.

  • Always sum both kinetic energy and potential energy changes when determining external work for an orbit change.

Virial Energy Relation in Circular Orbits
  • For any circular gravitational orbit, K=−12UK = -\frac{1}{2}U, which means E=K+U=12U=−KE = K + U = \frac{1}{2}U = -K. Consequently, ΔE=12ΔU=−ΔK\Delta E = \frac{1}{2}\Delta U = -\Delta K.

  • Use the shortcut ΔE=12ΔU\Delta E = \frac{1}{2}\Delta U to quickly find the total energy change and verify your external work.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the total work-energy relationship: Wext=ΔE=ΔK+ΔUW_{\text{ext}} = \Delta E = \Delta K + \Delta U.

  2. Substitute the previously computed values: Wext=(−9.53×109 J)+(1.91×1010 J)W_{\text{ext}} = (-9.53 \times 10^9\text{ J}) + (1.91 \times 10^{10}\text{ J}).

  3. Compute the sum: Wext=+9.53×109 JW_{\text{ext}} = +9.53 \times 10^9\text{ J}.

Final answer

Wext=+9.53×109 JW_{\text{ext}} = +9.53 \times 10^9\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between lifting an object at rest versus shifting an object between dynamic orbits with different orbital velocities.

  • Practice using the circular orbit energy relation E=12U=−KE = \frac{1}{2}U = -K to check work problems.

Lock it in

Similar question

01

A 200 kg200\text{ kg} weather satellite is raised from a circular orbit of radius rA=7.00×106 mr_A = 7.00 \times 10^6\text{ m} to rB=1.40×107 mr_B = 1.40 \times 10^7\text{ m} around Earth (M=5.972×1024 kgM = 5.972 \times 10^{24}\text{ kg}, G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2). Calculate the change in potential energy ΔU\Delta U.

Answer

ΔU=GMm(1rA−1rB)=(6.674×10−11)(5.972×1024)(200)(17.00×106−11.40×107)≈+5.69×109 J\Delta U = GMm\left(\frac{1}{r_A} - \frac{1}{r_B}\right) = (6.674 \times 10^{-11})(5.972 \times 10^{24})(200)\left(\frac{1}{7.00 \times 10^6} - \frac{1}{1.40 \times 10^7}\right) \approx +5.69 \times 10^9\text{ J}.

02

A spacecraft of mass m=1200 kgm = 1200\text{ kg} orbits the Moon (MM=7.342×1022 kgM_M = 7.342 \times 10^{22}\text{ kg}, G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2) in a circular orbit of radius r1=1.85×106 mr_1 = 1.85 \times 10^6\text{ m}. Thrusters boost it to an outer circular orbit of radius r2=3.70×106 mr_2 = 3.70 \times 10^6\text{ m}. Find the minimum external mechanical work WextW_{\text{ext}} required for the transfer.

Answer

For circular orbits, E=−GMm2rE = -\frac{GMm}{2r}. Thus Wext=ΔE=GMm2(1r1−1r2)W_{\text{ext}} = \Delta E = \frac{GMm}{2}\left(\frac{1}{r_1} - \frac{1}{r_2}\right). Calculating: GMm=(6.674×10−11)(7.342×1022)(1200)≈5.880×1015 J⋅mGMm = (6.674 \times 10^{-11})(7.342 \times 10^{22})(1200) \approx 5.880 \times 10^{15}\text{ J}\cdot\text{m}. Then Wext=5.880×10152(11.85×106−13.70×106)≈+7.95×108 JW_{\text{ext}} = \frac{5.880 \times 10^{15}}{2}\left(\frac{1}{1.85 \times 10^6} - \frac{1}{3.70 \times 10^6}\right) \approx +7.95 \times 10^8\text{ J}.

03

A satellite in a circular orbit of radius rr around a planet has mechanical energy E1=−4.50×109 JE_1 = -4.50 \times 10^9\text{ J} and kinetic energy K1K_1. After transfer to a higher circular orbit with radius r2=1.50rr_2 = 1.50 r, find its new kinetic energy K2K_2 and the work WextW_{\text{ext}} done by external forces.

Answer

For circular orbits, K=−EK = -E, so K1=+4.50×109 JK_1 = +4.50 \times 10^9\text{ J}. Since K∝1rK \propto \frac{1}{r}, K2=K11.50=4.50×1091.50=+3.00×109 JK_2 = \frac{K_1}{1.50} = \frac{4.50 \times 10^9}{1.50} = +3.00 \times 10^9\text{ J}. Then ΔK=3.00×109−4.50×109=−1.50×109 J\Delta K = 3.00 \times 10^9 - 4.50 \times 10^9 = -1.50 \times 10^9\text{ J}. Using Wext=ΔE=−ΔKW_{\text{ext}} = \Delta E = -\Delta K, we obtain Wext=−(−1.50×109 J)=+1.50×109 JW_{\text{ext}} = -(-1.50 \times 10^9\text{ J}) = +1.50 \times 10^9\text{ J}.

Loading workspace…