Resources

Two blocks, Block A of mass mA=6.00 kgm_A = 6.00\text{ kg} and Block B of mass mB=4.00 kgm_B = 4.00\text{ kg}, are connected by a light, inextensible cord passing over a frictionless, massless pulley in a modified Atwood setup. Block A is placed on a rough horizontal tabletop where the coefficient of kinetic friction is μk=0.250\mu_k = 0.250. Block B hangs vertically suspended in the air. A horizontal pulling force F=55.0 NF = 55.0\text{ N} is applied to Block A directed to the left, away from the pulley, causing Block A to accelerate to the left and Block B to accelerate upward. Take g=9.80 m/s2g = 9.80\text{ m/s}^2. (a) Write the dynamic equations of motion derived from the free-body diagram for each block. (b) Find the magnitude of the acceleration aa of the two-block system. (c) Determine the tension TT in the connecting cord.

Answer and steps

Final answer

(a) For Block A (leftward +x+x): F−T−fk=mAaF - T - f_k = m_A a where fk=μkmAg=14.7 Nf_k = \mu_k m_A g = 14.7\text{ N}; for Block B (upward +y+y): T−mBg=mBaT - m_B g = m_B a; (b) a=F−μkmAg−mBgmA+mB=55.0−14.7−39.210.0=0.110 m/s2a = \frac{F - \mu_k m_A g - m_B g}{m_A + m_B} = \frac{55.0 - 14.7 - 39.2}{10.0} = 0.110\text{ m/s}^2; (c) T=mB(g+a)=39.6 NT = m_B(g + a) = 39.6\text{ N}.

Steps

01

Free-Body Diagram for Block A (mA=6.00 kgm_A = 6.00\text{ kg})

Part (a): Equations of Motion from Free-Body Diagrams

To model the physical situation, define coordinate axes consistent with the direction of motion:

  • Block A accelerates to the left along the tabletop. Let the +x+x-direction be directed to the left, and +y+y be vertically upward.
  • Block B is pulled upward. Let the vertical upward direction be positive.

Four forces act on Block A:

  • Vertically:
    • Downward gravitational force: mAgm_A g
    • Upward normal force from the tabletop: NAN_A
  • Horizontally:
    • Applied force directed to the left: F=55.0 NF = 55.0\text{ N}
    • Tension in the cord directed to the right (toward the pulley): TT
    • Kinetic friction opposing the leftward motion (directed to the right): fkf_k

Since there is no vertical acceleration for Block A: NA−mAg=0  ⟹  NA=mAgN_A - m_A g = 0 \implies N_A = m_A g

The magnitude of the kinetic friction force is: fk=μkNA=μkmAg=(0.250)(6.00 kg)(9.80 m/s2)=14.7 Nf_k = \mu_k N_A = \mu_k m_A g = (0.250)(6.00\text{ kg})(9.80\text{ m/s}^2) = 14.7\text{ N}

Applying Newton's second law along the horizontal direction of motion (+x+x to the left): F−T−fk=mAaF - T - f_k = m_A a 55.0−T−14.7=6.00a55.0 - T - 14.7 = 6.00 a

02

Free-Body Diagram for Block B (mB=4.00 kgm_B = 4.00\text{ kg})

Two forces act along the vertical line:

  • Upward tension from the cord: TT
  • Downward gravitational force: mBg=(4.00 kg)(9.80 m/s2)=39.2 Nm_B g = (4.00\text{ kg})(9.80\text{ m/s}^2) = 39.2\text{ N}

Because the cord is inextensible, Block B accelerates upward with the same magnitude aa as Block A moves to the left: T−mBg=mBaT - m_B g = m_B a


Part (b): Acceleration of the System

To eliminate the internal tension TT, add the two equations of motion: (F−T−fk)+(T−mBg)=mAa+mBa(F - T - f_k) + (T - m_B g) = m_A a + m_B a

F−fk−mBg=(mA+mB)aF - f_k - m_B g = (m_A + m_B)a

Solve for the acceleration aa: a=F−μkmAg−mBgmA+mBa = \frac{F - \mu_k m_A g - m_B g}{m_A + m_B}

Substitute the numerical values: a=55.0 N−14.7 N−39.2 N6.00 kg+4.00 kg=1.10 N10.0 kg=0.110 m/s2a = \frac{55.0\text{ N} - 14.7\text{ N} - 39.2\text{ N}}{6.00\text{ kg} + 4.00\text{ kg}} = \frac{1.10\text{ N}}{10.0\text{ kg}} = 0.110\text{ m/s}^2


Part (c): Tension in the Cord

Substitute the value of aa into the equation of motion for Block B: T=mB(g+a)T = m_B(g + a)

T=(4.00 kg)(9.80 m/s2+0.110 m/s2)=(4.00 kg)(9.91 m/s2)=39.64 N≈39.6 NT = (4.00\text{ kg})(9.80\text{ m/s}^2 + 0.110\text{ m/s}^2) = (4.00\text{ kg})(9.91\text{ m/s}^2) = 39.64\text{ N} \approx 39.6\text{ N}

(Check with Block A: T=F−fk−mAa=55.0−14.7−(6.00)(0.110)=40.3−0.66=39.64 NT = F - f_k - m_A a = 55.0 - 14.7 - (6.00)(0.110) = 40.3 - 0.66 = 39.64\text{ N}, which confirms the result.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the direction of kinetic friction on Block A, assuming friction opposes the cord tension or acts to the left rather than opposing the leftward motion.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    fk=μk⋅mA⋅g=0.250⋅6.00⋅9.80=14.7 Nf_k = \mu_k \cdot m_A \cdot g = 0.250 \cdot 6.00 \cdot 9.80 = 14.7\text{ N}

  2. Step 2

    Block A: \text{Block A: } F - T + f_k = m_A ⋅\cdot a \ Block B: \text{Block B: } T - m_B ⋅\cdot g = m_B ⋅\cdot a

    Correct

    Block A: \text{Block A: } F - T - f_k = m_A a \ Block B: \text{Block B: } T - m_B g = m_B a

    Because Block A slides to the left, kinetic friction must point in the opposite direction (to the right, toward the pulley). Choosing left as the positive direction means both tension TT and friction fkf_k act in the negative direction, so the equation must be F−T−fk=mAaF - T - f_k = m_A a.

  3. Step 3

    F + f_k - m_B ⋅\cdot g = (m_A + m_B) ⋅\cdot a   ⟹  \implies 55.0 + 14.7 - 39.2 = 10.00 ⋅\cdot a   ⟹  \implies 30.5 = 10.00 ⋅\cdot a   ⟹  \implies a = 3.05 m/s\text{ m/s}^2

    Correct

    a = F−fk−mBgmA+mB\frac{F - f_k - m_B g}{m_A + m_B} = 55.0−14.7−39.210.00\frac{55.0 - 14.7 - 39.2}{10.00} = 0.110 m/s\text{ m/s}^2

    Your algebraic method of combining the two equations to eliminate tension was solid, but substituting +fk+f_k instead of −fk-f_k led to an incorrect acceleration.

  4. Step 4

    T = m_B ⋅\cdot (g + a) = 4.00 ⋅\cdot (9.80 + 3.05) = 4.00 ⋅\cdot 12.85 = 51.4 N\text{ N}

    Correct

    T = m_B(g + a) = 4.00 ⋅\cdot (9.80 + 0.110) = 39.6 N\text{ N}

    You correctly related tension to Block B's upward acceleration, but your numerical answer reflects the carried-over acceleration error.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately calculated the magnitude of the kinetic friction force on Block A.

You correctly established Newton's second law for the hanging block, Block B.

You correctly eliminated internal tension by summing the dynamic equations of motion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinetic friction direction error

You treated kinetic friction as acting in the same direction as the pulling force rather than opposing the leftward sliding motion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misidentifying the direction of kinetic friction on a free-body diagram when multiple forces act on an object. Kinetic friction always opposes the relative velocity between contacting surfaces, regardless of which way the cord tension pulls.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Relative Motion First
  • Kinetic friction f⃗k\vec{f}_k always opposes the velocity vector v⃗\vec{v} of the contact surface.

  • Before writing dynamic equations, draw the velocity arrow v⃗\vec{v} of the object. Place f⃗k\vec{f}_k directly opposite to v⃗\vec{v}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the equation along the direction of motion (left is positive): F−T−fk=mAaF - T - f_k = m_A a.

  2. Add the equation for Block B (T−mBg=mBaT - m_B g = m_B a): (F−T−fk)+(T−mBg)=(mA+mB)a(F - T - f_k) + (T - m_B g) = (m_A + m_B)a.

  3. Solve for aa: a=55.0−14.7−39.26.00+4.00=1.1010.00=0.110 m/s2a = \frac{55.0 - 14.7 - 39.2}{6.00 + 4.00} = \frac{1.10}{10.00} = 0.110\text{ m/s}^2.

  4. Substitute aa back into T=mB(g+a)T = m_B(g + a): T=4.00(9.80+0.110)=39.64 N≈39.6 NT = 4.00(9.80 + 0.110) = 39.64\text{ N} \approx 39.6\text{ N}.

Final answer

a=0.110 m/s2, T=39.6 Na = 0.110\text{ m/s}^2,\ T = 39.6\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch a complete free-body diagram showing both the velocity vector and all individual force vectors before writing algebraic equations.

  • Verify that every resistive force (friction, drag) carries a negative sign when projecting onto an axis oriented along the direction of motion.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to include the kinetic friction force on Block A, treating the horizontal surface as frictionless.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F−T=mAaF - T = m_A a

    Correct

    F−T−fk=mAaF - T - f_k = m_A a, where fk=μkmAg=14.7 Nf_k = \mu_k m_A g = 14.7\text{ N}

    You omitted the kinetic friction force fk=μkNA=μkmAgf_k = \mu_k N_A = \mu_k m_A g opposing Block A's leftward motion. Because the table is rough with μk=0.250\mu_k = 0.250, friction acts to the right alongside tension.

  2. Step 2

    T−mBg=mBaT - m_B g = m_B a

  3. Step 3

    F−mBg=(mA+mB)a  ⟹  55.0−4.00×9.80=10.00a  ⟹  15.8=10.00a  ⟹  a=1.58 m/s2F - m_B g = (m_A + m_B)a \implies 55.0 - 4.00 \times 9.80 = 10.00 a \implies 15.8 = 10.00 a \implies a = 1.58\text{ m/s}^2

    Correct

    F−fk−mBg=(mA+mB)a  ⟹  55.0−14.7−39.2=10.00a  ⟹  1.10=10.00a  ⟹  a=0.110 m/s2F - f_k - m_B g = (m_A + m_B)a \implies 55.0 - 14.7 - 39.2 = 10.00 a \implies 1.10 = 10.00 a \implies a = 0.110\text{ m/s}^2

    Your algebra for adding the equations to eliminate tension TT was executed correctly, but your result was affected by the missing friction term in Step 1.

  4. Step 4

    T=mB(g+a)=4.00×(9.80+1.58)=4.00×11.38=45.5 NT = m_B(g + a) = 4.00 \times (9.80 + 1.58) = 4.00 \times 11.38 = 45.5\text{ N}

    Correct

    T=mB(g+a)=4.00×(9.80+0.110)=39.6 NT = m_B(g + a) = 4.00 \times (9.80 + 0.110) = 39.6\text{ N}

    Your substitution and calculation for tension followed correctly from your equation for Block B, but the value is inaccurate because it used the affected acceleration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the vertical equation of motion for suspended Block B.

You accurately added the two dynamic equations to eliminate internal cord tension.

You correctly substituted the computed acceleration back into the equation for Block B to solve for tension.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Kinetic Friction Force

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not account for the contact force of kinetic friction between Block A and the rough tabletop, treating the horizontal surface as frictionless.

REASONING PATH
Your ACEpath teacher’s suggested approach
Surface Contact Check
  • Whenever a surface has μk>0\mu_k > 0 and the object is sliding, kinetic friction fk=μkNf_k = \mu_k N must oppose the relative velocity.

  • Check the problem statement for friction coefficients, draw fkf_k opposing sliding on the free-body diagram, and include it in the net force equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include kinetic friction in Block A's horizontal force balance: F−T−fk=mAaF - T - f_k = m_A a, where fk=μkmAg=(0.250)(6.00 kg)(9.80 m/s2)=14.7 Nf_k = \mu_k m_A g = (0.250)(6.00\text{ kg})(9.80\text{ m/s}^2) = 14.7\text{ N}.

  2. Add the corrected equation for Block A to Block B's equation: (F−T−fk)+(T−mBg)=(mA+mB)a(F - T - f_k) + (T - m_B g) = (m_A + m_B)a.

  3. Solve for acceleration: a=55.0−14.7−39.210.00=1.1010.00=0.110 m/s2a = \frac{55.0 - 14.7 - 39.2}{10.00} = \frac{1.10}{10.00} = 0.110\text{ m/s}^2.

  4. Substitute a=0.110 m/s2a = 0.110\text{ m/s}^2 into T=mB(g+a)=4.00(9.80+0.110)=39.64 N≈39.6 NT = m_B(g + a) = 4.00(9.80 + 0.110) = 39.64\text{ N} \approx 39.6\text{ N}.

Final answer

(a) Block A: F−T−fk=mAaF - T - f_k = m_A a; Block B: T−mBg=mBaT - m_B g = m_B a; (b) a=0.110 m/s2a = 0.110\text{ m/s}^2; (c) T=39.6 NT = 39.6\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw a complete free-body diagram for each body before writing equations of motion.

  • Scan the problem text for keywords like 'rough' or 'μk\mu_k' to ensure friction is not left off the diagram.

OverviewACEpath Teacher's Diagnosis

03 The student assumes Block B accelerates downward instead of upward, reversing the signs in the equation of motion for Block B.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    fk=μk⋅mA⋅g=0.250⋅6.00⋅9.80=14.7 N  ⟹  Block A: F−T−fk=mAaf_k = \mu_k \cdot m_A \cdot g = 0.250 \cdot 6.00 \cdot 9.80 = 14.7\text{ N} \implies \text{Block A: } F - T - f_k = m_A a

  2. Step 2

    Block B: mBg−T=mBa\text{Block B: } m_B g - T = m_B a

    Correct

    Block B: T−mBg=mBa\text{Block B: } T - m_B g = m_B a

    The problem states that pulling Block A to the left causes Block B to accelerate upward. Because the acceleration is upward, the upward cord tension must exceed the downward gravitational force, giving T−mBg=mBaT - m_B g = m_B a.

  3. Step 3

    F−fk+mBg=(mA+mB)a  ⟹  55.0−14.7+39.2=10.00a  ⟹  79.5=10.00a  ⟹  a=7.95 m/s2F - f_k + m_B g = (m_A + m_B)a \implies 55.0 - 14.7 + 39.2 = 10.00 a \implies 79.5 = 10.00 a \implies a = 7.95\text{ m/s}^2

    Correct

    F−fk−mBg=(mA+mB)a  ⟹  55.0−14.7−39.2=10.00a  ⟹  a=0.110 m/s2F - f_k - m_B g = (m_A + m_B)a \implies 55.0 - 14.7 - 39.2 = 10.00 a \implies a = 0.110\text{ m/s}^2

    Because Block B's equation had gravity assisting rather than opposing the motion, the gravitational force was added rather than subtracted, leading to an incorrect acceleration.

  4. Step 4

    T=mB(g−a)=4.00(9.80−7.95)=7.40 NT = m_B(g - a) = 4.00(9.80 - 7.95) = 7.40\text{ N}

    Correct

    T=mB(g+a)=4.00(9.80+0.110)=39.6 NT = m_B(g + a) = 4.00(9.80 + 0.110) = 39.6\text{ N}

    Substituting your downward-acceleration formula and previous acceleration value propagated the sign error into the tension calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the magnitude of kinetic friction on Block A using fk=μkmAgf_k = \mu_k m_A g.

You correctly established the dynamic equation of motion for Block A directed along its leftward acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Coordinate Direction on Suspended Mass

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the hanging block as descending under gravity by habit rather than following the kinematic constraint that pulling Block A away from the pulley forces Block B to move upward.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish Kinematic Direction
  • For connected bodies, trace the cord from the driving object to determine the physical direction of acceleration for each body before writing Newton's second law.

  • Block A moves left (away from pulley), so the string pulls Block B upward; define upward as the positive direction for Block B.

Match Net Force to Acceleration
  • Along the acceleration axis, forces in the direction of acceleration are positive and opposing forces are negative: ∑Falong a=ma\sum F_{\text{along } a} = m a.

  • Since Block B accelerates upward, write T−mBg=mBaT - m_B g = m_B a, ensuring tension dominates gravity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the equation for Block B with upward as positive: T−mBg=mBaT - m_B g = m_B a.

  2. Add the two dynamic equations: (F−T−fk)+(T−mBg)=(mA+mB)a(F - T - f_k) + (T - m_B g) = (m_A + m_B)a.

  3. Simplify the combined equation: F−fk−mBg=(mA+mB)aF - f_k - m_B g = (m_A + m_B)a.

  4. Substitute numerical values: 55.0−14.7−39.2=10.00a  ⟹  1.10=10.00a  ⟹  a=0.110 m/s255.0 - 14.7 - 39.2 = 10.00 a \implies 1.10 = 10.00 a \implies a = 0.110\text{ m/s}^2.

  5. Substitute aa back into Block B's equation: T=mB(g+a)=4.00(9.80+0.110)=39.6 NT = m_B(g + a) = 4.00(9.80 + 0.110) = 39.6\text{ N}.

Final answer

(a) Block A: F−T−fk=mAaF - T - f_k = m_A a; Block B: T−mBg=mBaT - m_B g = m_B a; (b) a=0.110 m/s2a = 0.110\text{ m/s}^2; (c) T=39.6 NT = 39.6\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch an acceleration arrow next to each body on your free-body diagrams before setting up ∑F=ma\sum F = ma.

  • Perform a physical reality check on the system: if an external force pulls a block away from the pulley, gravity on the hanging block must resist the motion, not aid it.

Lock it in

Similar question

01

A 5.0 kg5.0\text{ kg} crate is pulled to the right along a rough floor with a force of 30.0 N30.0\text{ N}. The coefficient of kinetic friction is μk=0.20\mu_k = 0.20. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, write the horizontal equation of motion and find the crate's acceleration.

Answer

a=4.04 m/s2a = 4.04\text{ m/s}^2. Steps: Normal force N=mg=(5.0)(9.8)=49 NN = mg = (5.0)(9.8) = 49\text{ N}; kinetic friction opposes rightward motion: fk=μkN=9.8 Nf_k = \mu_k N = 9.8\text{ N} directed left; ΣFx=F−fk=ma  ⟹  30.0−9.8=5.0a  ⟹  a=4.04 m/s2\Sigma F_x = F - f_k = m a \implies 30.0 - 9.8 = 5.0 a \implies a = 4.04\text{ m/s}^2.

02

In a modified Atwood machine, Block 1 (m1=3.0 kgm_1 = 3.0\text{ kg}) sits on a horizontal table with μk=0.30\mu_k = 0.30 and is connected over a frictionless pulley to a hanging Block 2 (m2=2.0 kgm_2 = 2.0\text{ kg}). Block 2 falls downward. Determine the magnitude of the system's acceleration. Take g=9.8 m/s2g = 9.8\text{ m/s}^2.

Answer

a=2.16 m/s2a = 2.16\text{ m/s}^2. Steps: Block 1 moves toward the pulley (right), so friction opposes motion (left): fk=μkm1g=(0.30)(3.0)(9.8)=8.82 Nf_k = \mu_k m_1 g = (0.30)(3.0)(9.8) = 8.82\text{ N}. System equation along motion: m2g−fk=(m1+m2)a  ⟹  (2.0)(9.8)−8.82=5.0a  ⟹  10.78=5.0a  ⟹  a=2.156≈2.16 m/s2m_2 g - f_k = (m_1 + m_2) a \implies (2.0)(9.8) - 8.82 = 5.0 a \implies 10.78 = 5.0 a \implies a = 2.156 \approx 2.16\text{ m/s}^2.

03

A 2.0 kg2.0\text{ kg} block slides down a 30∘30^\circ incline where μk=0.15\mu_k = 0.15. A student pulls the block down the incline with an additional force of 10.0 N10.0\text{ N} parallel to the slope. Taking g=9.8 m/s2g = 9.8\text{ m/s}^2, find the acceleration down the incline.

Answer

a=8.63 m/s2a = 8.63\text{ m/s}^2. Steps: Motion is down the incline, so friction acts up the incline: fk=μkmgcos⁡(30∘)=(0.15)(2.0)(9.8)(0.866)=2.55 Nf_k = \mu_k m g \cos(30^\circ) = (0.15)(2.0)(9.8)(0.866) = 2.55\text{ N}. Net force down the incline: ΣF=F+mgsin⁡(30∘)−fk=10.0+(2.0)(9.8)(0.5)−2.55=17.25 N\Sigma F = F + m g \sin(30^\circ) - f_k = 10.0 + (2.0)(9.8)(0.5) - 2.55 = 17.25\text{ N}. Acceleration: a=17.25 N2.0 kg≈8.63 m/s2a = \frac{17.25\text{ N}}{2.0\text{ kg}} \approx 8.63\text{ m/s}^2.

Loading workspace…