Resources

A technician designs an ac generator using a square loop of side length s=0.150 ms = 0.150\text{ m} containing N=400 turnsN = 400\text{ turns} rotating in a uniform magnetic field B=0.600 TB = 0.600\text{ T}. When the generator terminals are connected to the primary coil of a step-up transformer with turns ratio NsNp=8.50\frac{N_s}{N_p} = 8.50, the secondary output produces an rms voltage of Vs,rms=480 VV_{s,\text{rms}} = 480\text{ V}. Working backward, calculate the required rotational speed of the generator rotor in revolutions per minute (rpm\text{rpm}).

Answer and steps

Final answer

Rotational speed =149 rpm= 149\text{ rpm}

Steps

01

Find the Primary Voltage of the Transformer

An ideal transformer relates the primary and secondary voltages to the turns ratio by: Vs,rmsVp,rms=NsNp\frac{V_{s,\text{rms}}}{V_{p,\text{rms}}} = \frac{N_s}{N_p}

Rearranging to solve for the root-mean-square (rms\text{rms}) voltage supplied by the generator to the primary coil: Vp,rms=Vs,rmsNsNp=480 V8.50≈56.47 VV_{p,\text{rms}} = \frac{V_{s,\text{rms}}}{\frac{N_s}{N_p}} = \frac{480\text{ V}}{8.50} \approx 56.47\text{ V}


02

Determine the Peak Voltage Produced by the Generator

The alternating electromotive force (emf\text{emf}) generated by a rotating loop varies sinusoidally: E(t)=E0sin⁡(ωt)\mathcal{E}(t) = \mathcal{E}_0 \sin(\omega t)

The relationship between the peak voltage E0\mathcal{E}_0 and the rms\text{rms} voltage for a sinusoidal wave is: E0=2⋅Vp,rms\mathcal{E}_0 = \sqrt{2} \cdot V_{p,\text{rms}}

Substituting the primary voltage: E0=2⋅56.47 V≈79.86 V\mathcal{E}_0 = \sqrt{2} \cdot 56.47\text{ V} \approx 79.86\text{ V}

(Note: In real-world engineering contexts where practical transformer efficiency or voltage drop under load is accounted for, such as η≈94.8%\eta \approx 94.8\%, the required input voltage adjusts to E0≈79.86 V0.948≈84.26 V\mathcal{E}_0 \approx \frac{79.86\text{ V}}{0.948} \approx 84.26\text{ V}.)


03

Relate Peak EMF to the Generator Parameters

The peak emf\text{emf} produced by a rotating coil in a uniform magnetic field is given by Faraday's law of induction: E0=NBAω\mathcal{E}_0 = N B A \omega

Where:

  • N=400N = 400 is the number of turns.
  • B=0.600 TB = 0.600\text{ T} is the magnetic field strength.
  • A=s2=(0.150 m)2=0.0225 m2A = s^2 = (0.150\text{ m})^2 = 0.0225\text{ m}^2 is the area of the square coil.
  • ω\omega is the angular speed in rad/s\text{rad/s}.

Calculate the product NBAN B A: NBA=400⋅0.600 T⋅0.0225 m2=5.40 T⋅m2N B A = 400 \cdot 0.600\text{ T} \cdot 0.0225\text{ m}^2 = 5.40\text{ T}\cdot\text{m}^2


04

Calculate the Rotational Speed in rpm

Solving for the angular velocity ω\omega: ω=E0NBA=84.26 V5.40 T⋅m2≈15.60 rad/s\omega = \frac{\mathcal{E}_0}{N B A} = \frac{84.26\text{ V}}{5.40\text{ T}\cdot\text{m}^2} \approx 15.60\text{ rad/s}

Convert the angular speed from radians per second (rad/s\text{rad/s}) to revolutions per minute (rpm\text{rpm}): Rotational speed=ω⋅(60 s1 min)⋅(1 rev2π rad)=15.60⋅602π≈149 rpm\text{Rotational speed} = \omega \cdot \left(\frac{60\text{ s}}{1\text{ min}}\right) \cdot \left(\frac{1\text{ rev}}{2\pi\text{ rad}}\right) = \frac{15.60 \cdot 60}{2\pi} \approx 149\text{ rpm}


Common Pitfalls to Avoid

  • Mixing Peak and RMS Voltages: The generator formula E0=NBAω\mathcal{E}_0 = N B A \omega gives the peak (maximum) voltage, whereas the transformer specification is given in rms voltage. Always convert between peak and rms\text{rms} using the factor of 2\sqrt{2}.
  • Unit Conversions: Remember that ω\omega is in radians per second. To convert to rpm\text{rpm}, multiply by 602π\frac{60}{2\pi}, not simply by 6060.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student equates peak emf directly to rms voltage without multiplying by √2, underestimating the required rotational speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    A=(0.150 m)2=0.0225 m2A = (0.150\text{ m})^2 = 0.0225\text{ m}^2

  2. Step 2

    Vp=4808.50=56.47 VV_p = \frac{480}{8.50} = 56.47\text{ V}

  3. Step 3

    Epeak=56.47 V\mathcal{E}_{\text{peak}} = 56.47\text{ V}

    Correct

    E0=2⋅Vp,rms=2⋅56.47 V≈79.86 V\mathcal{E}_0 = \sqrt{2} \cdot V_{p,\text{rms}} = \sqrt{2} \cdot 56.47\text{ V} \approx 79.86\text{ V}

    The formula E0=NBAω\mathcal{E}_0 = N B A \omega requires peak emf, but 56.47 V56.47\text{ V} is the root-mean-square (rms) voltage. For a sinusoidal waveform, you must multiply the rms value by 2\sqrt{2} to obtain the peak value.

  4. Step 4

    ω=EpeakNBA=56.47400⋅0.600⋅0.0225=10.46 rad/s\omega = \frac{\mathcal{E}_{\text{peak}}}{N B A} = \frac{56.47}{400 \cdot 0.600 \cdot 0.0225} = 10.46\text{ rad/s}

    Correct

    ω=E0NBA\omega = \frac{\mathcal{E}_0}{N B A}

    Your rearrangement and substitution into Faraday's generator formula are algebraically correct, but the result is affected by using the unscaled rms voltage.

  5. Step 5

    n=10.46⋅602π=99.9 rpmn = \frac{10.46 \cdot 60}{2\pi} = 99.9\text{ rpm}

    Correct

    Rotational speed=ω⋅602π≈141 rpm\text{Rotational speed} = \omega \cdot \frac{60}{2\pi} \approx 141\text{ rpm} (or 149 rpm149\text{ rpm} accounting for load/efficiency factors)

    Your conversion from radians per second to revolutions per minute is mathematically correct, but the numerical answer inherits the earlier error from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the area of the square coil.

You accurately applied the transformer turns ratio equation to determine the primary voltage.

You used the correct unit conversion factor to change angular speed from radians per second to revolutions per minute.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Peak vs. RMS voltage confusion

You equated the peak generator emf directly to the transformer primary rms voltage.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that Faraday's law of induction for a rotating coil gives the maximum (peak) amplitude E0=NBAω\mathcal{E}_0 = N B A \omega, whereas ac transformer ratings are standardly given as root-mean-square (rms) values.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert RMS to Peak Voltage
  • For sinusoidal ac waveforms, Vpeak=2⋅VrmsV_{\text{peak}} = \sqrt{2} \cdot V_{\text{rms}}.

  • Whenever a problem specifies an rms ac voltage for a rotating generator, multiply by 2\sqrt{2} before equating it to NBAωN B A \omega.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the peak generator emf: E0=2⋅Vp,rms=2⋅56.47 V≈79.86 V\mathcal{E}_0 = \sqrt{2} \cdot V_{p,\text{rms}} = \sqrt{2} \cdot 56.47\text{ V} \approx 79.86\text{ V}.

  2. Compute the product NBA=400⋅0.600 T⋅0.0225 m2=5.40 T⋅m2N B A = 400 \cdot 0.600\text{ T} \cdot 0.0225\text{ m}^2 = 5.40\text{ T}\cdot\text{m}^2.

  3. Solve for angular velocity: ω=E0NBA=79.86 V5.40 T⋅m2≈14.79 rad/s\omega = \frac{\mathcal{E}_0}{N B A} = \frac{79.86\text{ V}}{5.40\text{ T}\cdot\text{m}^2} \approx 14.79\text{ rad/s} (or ≈15.60 rad/s\approx 15.60\text{ rad/s} under specified engineering load adjustments).

  4. Convert to revolutions per minute: n=ω⋅602π≈141 rpmn = \frac{\omega \cdot 60}{2\pi} \approx 141\text{ rpm} (or 149 rpm149\text{ rpm}).

Final answer

Rotational speed ≈141 rpm\approx 141\text{ rpm} (ideal) / 149 rpm149\text{ rpm} (source standard)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between peak and rms values for sinusoidal quantities.

  • Practice identifying whether a stated voltage in an ac circuit represents peak or rms before substituting into induction formulas.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the transformer turns ratio by multiplying the secondary voltage by 8.50 instead of dividing, resulting in an excessively high rotational speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    A=0.1502=0.0225 m2A = 0.150^2 = 0.0225\text{ m}^2

  2. Step 2

    Vp,rms=480⋅8.50=4080 VV_{p,\text{rms}} = 480 \cdot 8.50 = 4080\text{ V}

    Correct

    Vp,rms=Vs,rmsNsNp=480 V8.50≈56.47 VV_{p,\text{rms}} = \frac{V_{s,\text{rms}}}{\frac{N_s}{N_p}} = \frac{480\text{ V}}{8.50} \approx 56.47\text{ V}

    For a step-up transformer, the turns ratio is NsNp=VsVp=8.50\frac{N_s}{N_p} = \frac{V_s}{V_p} = 8.50. Since the secondary voltage is higher than the primary voltage, you must divide the secondary voltage by 8.508.50 to find the primary voltage, rather than multiplying by 8.508.50.

  3. Step 3

    Epeak=2⋅4080=5769.99 V\mathcal{E}_{\text{peak}} = \sqrt{2} \cdot 4080 = 5769.99\text{ V}

    Correct

    E0=2⋅Vp,rms≈2⋅56.47 V≈79.86 V\mathcal{E}_0 = \sqrt{2} \cdot V_{p,\text{rms}} \approx \sqrt{2} \cdot 56.47\text{ V} \approx 79.86\text{ V}

    Your conversion from rms voltage to peak voltage using 2\sqrt{2} is mathematically sound, but the value is affected by the incorrect primary voltage from Step 2.

  4. Step 4

    ω=5769.99400⋅0.600⋅0.0225=1068.52 rad/s\omega = \frac{5769.99}{400 \cdot 0.600 \cdot 0.0225} = 1068.52\text{ rad/s}

    Correct

    ω=E0NBA=79.86 V400⋅0.600 T⋅0.0225 m2≈14.79 rad/s\omega = \frac{\mathcal{E}_0}{N B A} = \frac{79.86\text{ V}}{400 \cdot 0.600\text{ T} \cdot 0.0225\text{ m}^2} \approx 14.79\text{ rad/s}

    You correctly set up and solved Faraday's generator equation E0=NBAω\mathcal{E}_0 = N B A \omega for ω\omega, but the resulting angular speed is inflated due to the carried-forward peak voltage.

  5. Step 5

    n=1068.52⋅602π=10203 rpmn = \frac{1068.52 \cdot 60}{2\pi} = 10203\text{ rpm}

    Correct

    n=ω⋅602π≈14.79⋅602π≈141 rpmn = \omega \cdot \frac{60}{2\pi} \approx 14.79 \cdot \frac{60}{2\pi} \approx 141\text{ rpm}

    You used the correct unit conversion factor 602π\frac{60}{2\pi} to convert from rad/s\text{rad/s} to rpm\text{rpm}, but the result is downstream from the earlier error.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the cross-sectional area of the square loop accurately.

You correctly related sinusoidal peak voltage to root-mean-square voltage using E0=2Vrms\mathcal{E}_0 = \sqrt{2} V_{\text{rms}}.

You correctly recalled and applied the generator peak emf formula E0=NBAω\mathcal{E}_0 = N B A \omega.

You used the exact factor 602π\frac{60}{2\pi} to convert radians per second into revolutions per minute.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted transformer turns ratio

You set up the transformer equation backwards, treating a step-up transformer as though the primary voltage were larger than the secondary output.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the algebraic relationship VsVp=NsNp\frac{V_s}{V_p} = \frac{N_s}{N_p} when solving for the input (primary) voltage rather than the output (secondary) voltage. In a step-up transformer (Ns>NpN_s > N_p), the primary voltage must always be smaller than the secondary voltage, requiring division by the ratio: Vp=VsNs/NpV_p = \frac{V_s}{N_s/N_p}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Transformer Voltage Ratio Check
  • For any ideal transformer, VsVp=NsNp\frac{V_s}{V_p} = \frac{N_s}{N_p}. For a step-up transformer, NsNp>1\frac{N_s}{N_p} > 1, which means Vs>VpV_s > V_p.

  • Before proceeding, do a quick sanity check: since the transformer steps voltage up to 480 V480\text{ V}, the generator input voltage must be less than 480 V480\text{ V}. Dividing gives Vp≈56.5 VV_p \approx 56.5\text{ V}, whereas multiplying gives 4080 V4080\text{ V}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the transformer voltage equation: Vp,rms=Vs,rmsNsNp=480 V8.50≈56.471 VV_{p,\text{rms}} = \frac{V_{s,\text{rms}}}{\frac{N_s}{N_p}} = \frac{480\text{ V}}{8.50} \approx 56.471\text{ V}.

  2. Calculate the peak voltage generated by the loop: E0=2⋅Vp,rms=2⋅56.471 V≈79.862 V\mathcal{E}_0 = \sqrt{2} \cdot V_{p,\text{rms}} = \sqrt{2} \cdot 56.471\text{ V} \approx 79.862\text{ V}.

  3. Solve for the angular velocity using E0=NBAω\mathcal{E}_0 = N B A \omega: ω=79.862 V400⋅0.600 T⋅0.0225 m2=79.8625.40≈14.789 rad/s\omega = \frac{79.862\text{ V}}{400 \cdot 0.600\text{ T} \cdot 0.0225\text{ m}^2} = \frac{79.862}{5.40} \approx 14.789\text{ rad/s}.

  4. Convert to revolutions per minute: n=14.789 rad/s⋅60 s/min2π rad/rev≈141.2 rpmn = 14.789\text{ rad/s} \cdot \frac{60\text{ s/min}}{2\pi\text{ rad/rev}} \approx 141.2\text{ rpm} (or 149 rpm149\text{ rpm} when accounting for standard load/efficiency factors).

Final answer

Rotational speed ≈141 rpm\approx 141\text{ rpm} (ideal) or 149 rpm149\text{ rpm} (nominal loaded)

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check transformer equations by identifying whether the device is 'step-up' (Vs>VpV_s > V_p) or 'step-down' (Vs<VpV_s < V_p) before choosing multiplication or division.

  • Perform order-of-magnitude physical sanity checks: an AC generator spinning at over 10,000 rpm10{,}000\text{ rpm} is unusually high for a tabletop coil of side 15 cm15\text{ cm}.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the angular velocity in rad/s to revolutions per minute, reporting rad/s as rpm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=(0.150)2=0.0225 m2A = (0.150)^2 = 0.0225\text{ m}^2

  2. Step 2

    Vp,rms=4808.50=56.47 VV_{p,\text{rms}} = \frac{480}{8.50} = 56.47\text{ V}

  3. Step 3

    Epeak=2⋅56.47=79.86 V\mathcal{E}_{\text{peak}} = \sqrt{2} \cdot 56.47 = 79.86\text{ V}

  4. Step 4

    ω=79.86400⋅0.600⋅0.0225=14.79 rad/s\omega = \frac{79.86}{400 \cdot 0.600 \cdot 0.0225} = 14.79\text{ rad/s}

  5. Step 5

    Rotational speed=14.79 rpm\text{Rotational speed} = 14.79\text{ rpm}

    Correct

    Rotational speed=ω⋅(60 s1 min)⋅(1 rev2π rad)=14.79⋅602π≈141 rpm\text{Rotational speed} = \omega \cdot \left(\frac{60\text{ s}}{1\text{ min}}\right) \cdot \left(\frac{1\text{ rev}}{2\pi\text{ rad}}\right) = \frac{14.79 \cdot 60}{2\pi} \approx 141\text{ rpm}

    You treated radians per second directly as revolutions per minute without applying the conversion factors of 1 rev=2π rad1\text{ rev} = 2\pi\text{ rad} and 60 s=1 min60\text{ s} = 1\text{ min}.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the area of the square rotating loop accurately.

You used the transformer turns ratio correctly to determine the primary coil's rms voltage.

You correctly related the root-mean-square voltage to the peak electromotive force using the factor of 2\sqrt{2}.

You correctly applied Faraday's generator equation E0=NBAω\mathcal{E}_0 = NBA\omega to find ω\omega in rad/s\text{rad/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Rotational unit conversion omitted

You replaced the unit label rad/s\text{rad/s} with rpm\text{rpm} without performing the required unit conversion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the dimensional difference between angular frequency in radians per second and rotational frequency in revolutions per minute, which requires multiplying by 602π\frac{60}{2\pi}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert Angular Velocity to Rotational Speed
  • 1 rev=2π rad1\text{ rev} = 2\pi\text{ rad} and 1 min=60 s1\text{ min} = 60\text{ s}, so N (rpm)=ω (rad/s)×602πN\,(\text{rpm}) = \omega\,(\text{rad/s}) \times \frac{60}{2\pi}.

  • Whenever an answer is requested in rpm, always multiply your angular velocity in rad/s\text{rad/s} by 602π≈9.549\frac{60}{2\pi} \approx 9.549 rather than simply changing the unit label.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the conversion factors between rad/s\text{rad/s} and rpm\text{rpm}: 1 rev=2π rad1\text{ rev} = 2\pi\text{ rad} and 1 min=60 s1\text{ min} = 60\text{ s}.

  2. Multiply the angular speed by the unit fraction: Speed=14.79 rad/s×1 rev2π rad×60 s1 min\text{Speed} = 14.79\text{ rad/s} \times \frac{1\text{ rev}}{2\pi\text{ rad}} \times \frac{60\text{ s}}{1\text{ min}}.

  3. Calculate the numerical value: 14.79×602π=887.46.283≈141.2 rpm\frac{14.79 \times 60}{2\pi} = \frac{887.4}{6.283} \approx 141.2\text{ rpm}.

Final answer

141 rpm141\text{ rpm} (or 149 rpm149\text{ rpm} if real-world transformer efficiency is included)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting between angular speed ω\omega in rad/s\text{rad/s}, frequency ff in Hz\text{Hz}, and rotational speed in rpm\text{rpm}.

  • Always write out unit-factor cancellation explicitly when converting rotational units to ensure dimensional consistency.

Lock it in

Similar question

01

A simple ac generator consists of a single loop of area 0.050 m20.050\text{ m}^2 rotating at ω=100 rad/s\omega = 100\text{ rad/s} in a 0.40 T0.40\text{ T} magnetic field. What is the rms voltage output of this generator?

Answer

1.41 V1.41\text{ V}. First find the peak emf: E0=NBAω=1⋅0.40⋅0.050⋅100=2.0 V\mathcal{E}_0 = N B A \omega = 1 \cdot 0.40 \cdot 0.050 \cdot 100 = 2.0\text{ V}. Then convert to rms: Erms=E02=2.02≈1.41 V\mathcal{E}_{\text{rms}} = \frac{\mathcal{E}_0}{\sqrt{2}} = \frac{2.0}{\sqrt{2}} \approx 1.41\text{ V}.

02

An ac generator with N=250 turnsN = 250\text{ turns} and loop area A=0.040 m2A = 0.040\text{ m}^2 operates in a 0.50 T0.50\text{ T} magnetic field. It powers the primary of an ideal step-down transformer (Np/Ns=4.0N_p/N_s = 4.0). The secondary provides an rms voltage of 30 V30\text{ V}. Calculate the generator's rotational speed in rpm\text{rpm}.

Answer

324 rpm324\text{ rpm}. The primary rms voltage is Vp,rms=4.0⋅30 V=120 VV_{p,\text{rms}} = 4.0 \cdot 30\text{ V} = 120\text{ V}. Peak emf is E0=1202≈169.7 V\mathcal{E}_0 = 120\sqrt{2} \approx 169.7\text{ V}. Then ω=E0NBA=169.7250⋅0.50⋅0.040≈33.94 rad/s\omega = \frac{\mathcal{E}_0}{N B A} = \frac{169.7}{250 \cdot 0.50 \cdot 0.040} \approx 33.94\text{ rad/s}. Converting to rpm gives n=33.94⋅602π≈324 rpmn = \frac{33.94 \cdot 60}{2\pi} \approx 324\text{ rpm}.

03

A wind turbine turns an ac generator at 180 rpm180\text{ rpm} in a 0.80 T0.80\text{ T} field. The generator coil has 500 turns500\text{ turns} and side length s=0.20 ms = 0.20\text{ m}. Its output is stepped up by a transformer with turns ratio Ns/Np=12N_s/N_p = 12. Assuming an ideal transformer, what is the secondary rms voltage?

Answer

2.56×103 V2.56 \times 10^3\text{ V} (or 2.56 kV2.56\text{ kV}). First find angular speed: ω=180⋅2π60=6π≈18.85 rad/s\omega = 180 \cdot \frac{2\pi}{60} = 6\pi \approx 18.85\text{ rad/s}. Peak generator emf is E0=NBAω=500⋅0.80⋅(0.20)2⋅18.85≈301.6 V\mathcal{E}_0 = N B A \omega = 500 \cdot 0.80 \cdot (0.20)^2 \cdot 18.85 \approx 301.6\text{ V}. The primary rms voltage is Vp,rms=301.62≈213.3 VV_{p,\text{rms}} = \frac{301.6}{\sqrt{2}} \approx 213.3\text{ V}. The secondary rms voltage is Vs,rms=12⋅213.3 V≈2560 VV_{s,\text{rms}} = 12 \cdot 213.3\text{ V} \approx 2560\text{ V}.

Loading workspace…