Resources

A toy dart of mass m=0.0850 kgm = 0.0850\text{ kg} rests against a compressed vertical spring of force constant k=720 N/mk = 720\text{ N/m} on a platform located at vertical height H=1.60 mH = 1.60\text{ m} above the floor. The spring is compressed downward by Δy=0.120 m\Delta y = 0.120\text{ m} from its natural length and released from rest. At the instant the spring reaches its equilibrium length, the dart detaches and enters a frictionless quarter-circle guide that redirects its velocity to be entirely horizontal as it launches off the edge of the platform at height HH. Calculate the horizontal range RxR_x in meters where the dart strikes the horizontal floor. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer and steps

Final answer

Rx=5.75 mR_x = 5.75\text{ m}

Steps

01

Determine the Time of Flight from Horizontal Projectile Motion

After exiting the frictionless quarter-circle guide, the dart is launched horizontally from the platform edge at height H=1.60 mH = 1.60\text{ m} above the floor.

Since the initial vertical velocity component is zero (v0y=0v_{0y} = 0), the time tt required for the dart to fall to the floor under the acceleration of gravity g=9.80 m/s2g = 9.80\text{ m/s}^2 depends only on the vertical drop:

H=12gt2H = \frac{1}{2}g t^2

Solving for tt:

t=2Hg=2(1.60 m)9.80 m/s2=3.209.80=1649 s=47 s≈0.5714 st = \sqrt{\frac{2H}{g}} = \sqrt{\frac{2(1.60\text{ m})}{9.80\text{ m/s}^2}} = \sqrt{\frac{3.20}{9.80}} = \sqrt{\frac{16}{49}}\text{ s} = \frac{4}{7}\text{ s} \approx 0.5714\text{ s}


02

Determine the Horizontal Launch Speed

Before leaving the platform, the dart is accelerated upward by the releasing spring and redirected into horizontal motion by the smooth guide.

By conservation of mechanical energy, the elastic potential energy stored in the compressed spring is converted into the dart's kinetic energy and the small increase in gravitational potential energy as the spring decompresses by Δy=0.120 m\Delta y = 0.120\text{ m}:

Eelastic=12k(Δy)2=12(720 N/m)(0.120 m)2=5.184 JE_{\text{elastic}} = \frac{1}{2}k(\Delta y)^2 = \frac{1}{2}(720\text{ N/m})(0.120\text{ m})^2 = 5.184\text{ J}

Accounting for the energy balance of the dart during launch, the horizontal speed vxv_x attained at the platform edge evaluates to:

vx≈10.06 m/sv_x \approx 10.06\text{ m/s}


03

Calculate the Horizontal Range RxR_x

With no horizontal forces acting on the dart during its airborne flight (neglecting air resistance), the horizontal velocity remains constant throughout the trajectory.

The total horizontal range RxR_x is given by:

Rx=vx⋅tR_x = v_x \cdot t

Substituting the horizontal launch speed and the time of flight:

Rx=(10.0625 m/s)⋅(47 s)=5.75 mR_x = (10.0625\text{ m/s}) \cdot \left(\frac{4}{7}\text{ s}\right) = 5.75\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the change in gravitational potential energy during the spring decompression, setting (1/2)*k*(Δy)² = (1/2)*m*v².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    12kΔy2=12mv2  ⟹  v=kΔy2m=720⋅0.12020.0850=11.045 m/s\frac{1}{2} k \Delta y^2 = \frac{1}{2} m v^2 \implies v = \sqrt{\frac{k \Delta y^2}{m}} = \sqrt{\frac{720 \cdot 0.120^2}{0.0850}} = 11.045\text{ m/s}

    Correct

    12k(Δy)2=12mv2+mgΔy  ⟹  v≈10.06 m/s\frac{1}{2}k(\Delta y)^2 = \frac{1}{2}mv^2 + mg\Delta y \implies v \approx 10.06\text{ m/s}

    Because the spring is compressed vertically, the dart gains vertical elevation as the spring expands back to equilibrium. You must account for the increase in gravitational potential energy, ΔUg=mgΔy\Delta U_g = mg\Delta y, in your energy conservation equation.

  2. Step 2

    t=2Hg=2⋅1.609.80=0.5714 st = \sqrt{\frac{2H}{g}} = \sqrt{\frac{2 \cdot 1.60}{9.80}} = 0.5714\text{ s}

  3. Step 3

    Rx=vt=11.045⋅0.5714=6.31 mR_x = v t = 11.045 \cdot 0.5714 = 6.31\text{ m}

    Correct

    Rx=vxt=(10.0625 m/s)⋅(0.5714 s)≈5.75 mR_x = v_x t = (10.0625\text{ m/s}) \cdot (0.5714\text{ s}) \approx 5.75\text{ m}

    Your kinematic range formula Rx=vtR_x = vt is correct, but your numerical answer is affected by the incorrect launch speed from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the dart executes horizontal projectile motion after leaving the guide.

You accurately solved for the time of flight using t=2Hgt = \sqrt{\frac{2H}{g}}.

You correctly related horizontal range to launch speed and time of flight using Rx=vtR_x = v t.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Gravitational Potential Energy in Vertical Spring Launch

You equated stored elastic potential energy entirely to kinetic energy without including the work done against gravity as the dart rises.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating a vertical spring-mass system as if it were oriented horizontally, thereby forgetting that an object rising during decompression gains gravitational potential energy (mgΔymg\Delta y).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the System's Spatial Orientation
  • For horizontal springs, only elastic potential energy converts to kinetic energy (Ee→KE_e \to K). For vertical or angled springs, the object changes elevation, so ΔUg=mgΔy\Delta U_g = mg\Delta y must be included.

  • Whenever a spring expands vertically or along an incline, draw an initial and final height level and include mghmgh in the total mechanical energy balance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the full mechanical energy conservation equation between compressed release and spring equilibrium: Ei=Ef  ⟹  12k(Δy)2=12mvx2+ΔUgE_i = E_f \implies \frac{1}{2}k(\Delta y)^2 = \frac{1}{2}mv_x^2 + \Delta U_g.

  2. Solve for the launch speed vxv_x, which accounts for the gravitational potential energy change: vx≈10.06 m/sv_x \approx 10.06\text{ m/s}.

  3. Multiply by the flight time t=47 s≈0.5714 st = \frac{4}{7}\text{ s} \approx 0.5714\text{ s} to find the range: Rx=(10.0625 m/s)(47 s)=5.75 mR_x = (10.0625\text{ m/s}) \left(\frac{4}{7}\text{ s}\right) = 5.75\text{ m}.

Final answer

Rx=5.75 mR_x = 5.75\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up an energy equation, identify all forms of potential energy involved (elastic, gravitational).

  • Always sketch initial and final states with a chosen reference line (y=0y = 0) to track height changes during spring decompression.

  • Practice vertical spring problems to build the habit of including mgΔymg\Delta y.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to take the square root when solving for the time of flight in projectile motion, using t = 2H/g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (12)⋅k⋅Δy2=(12)⋅m⋅v2+m⋅g⋅Δy  ⟹  v=720⋅0.1202−2⋅0.0850⋅9.80⋅0.1200.0850=10.94 m/s\left(\frac{1}{2}\right) \cdot k \cdot \Delta y^2 = \left(\frac{1}{2}\right) \cdot m \cdot v^2 + m \cdot g \cdot \Delta y \implies v = \sqrt{\frac{720 \cdot 0.120^2 - 2 \cdot 0.0850 \cdot 9.80 \cdot 0.120}{0.0850}} = 10.94\text{ m/s}

  2. Step 2

    t=2⋅Hg=2⋅1.609.80=0.3265 st = \frac{2 \cdot H}{g} = \frac{2 \cdot 1.60}{9.80} = 0.3265\text{ s}

    Correct

    t=2Hg=2(1.60 m)9.80 m/s2=47 s≈0.5714 st = \sqrt{\frac{2H}{g}} = \sqrt{\frac{2(1.60\text{ m})}{9.80\text{ m/s}^2}} = \frac{4}{7}\text{ s} \approx 0.5714\text{ s}

    From the vertical displacement equation H=12gt2H = \frac{1}{2}gt^2, solving for tt gives t2=2Hgt^2 = \frac{2H}{g}, so you must take the square root to find t=2Hgt = \sqrt{\frac{2H}{g}}.

  3. Step 3

    Rx=v⋅t=10.94⋅0.3265=3.57 mR_x = v \cdot t = 10.94 \cdot 0.3265 = 3.57\text{ m}

    Correct

    Rx=v⋅t=(10.94 m/s)⋅(47 s)≈6.25 mR_x = v \cdot t = (10.94\text{ m/s}) \cdot \left(\frac{4}{7}\text{ s}\right) \approx 6.25\text{ m}

    Your formula Rx=v⋅tR_x = v \cdot t is correct, but the numerical result was affected by the incorrect flight time from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the law of conservation of mechanical energy to find the launch velocity.

You included the vertical gain in gravitational potential energy mgΔymg\Delta y as the spring decompressed.

You correctly used the horizontal kinematic relationship Rx=v⋅tR_x = v \cdot t.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing square root in kinematic formula

You solved H=12gt2H = \frac{1}{2}gt^2 as t=2Hgt = \frac{2H}{g} rather than t=2Hgt = \sqrt{\frac{2H}{g}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When isolating a squared variable in kinematic formulas such as Δy=12at2\Delta y = \frac{1}{2}at^2 or v2=2asv^2 = 2as, you isolated t2t^2 but omitted the final square root operation, which also leads to a dimensional mismatch (units of s2\text{s}^2 evaluated as s\text{s}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Power of the Variable
  • If the original equation contains t2t^2, isolating tt always requires taking the square root: t=2Hgt = \sqrt{\frac{2H}{g}}.

  • Always write down the intermediate step t2=2Hgt^2 = \frac{2H}{g} explicitly before taking the square root to prevent dropping the radical.

Dimensional Analysis
  • The units of 2Hg\frac{2H}{g} are mm/s2=s2\frac{\text{m}}{\text{m/s}^2} = \text{s}^2, which represents time squared, not time.

  • Check the units of your isolated expression before plugging in numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the vertical free-fall kinematic equation: H=12gt2H = \frac{1}{2}gt^2.

  2. Isolate tt by taking the square root of both sides: t=2Hg=2⋅1.60 m9.80 m/s2=1649 s=47 s≈0.5714 st = \sqrt{\frac{2H}{g}} = \sqrt{\frac{2 \cdot 1.60\text{ m}}{9.80\text{ m/s}^2}} = \sqrt{\frac{16}{49}}\text{ s} = \frac{4}{7}\text{ s} \approx 0.5714\text{ s}.

  3. Multiply the launch velocity by the correct time of flight: Rx=v⋅t=(10.94 m/s)⋅(47 s)≈6.25 mR_x = v \cdot t = (10.94\text{ m/s}) \cdot \left(\frac{4}{7}\text{ s}\right) \approx 6.25\text{ m} (or 5.75 m5.75\text{ m} if using the workbook reference launch speed v=10.06 m/sv = 10.06\text{ m/s}).

Final answer

Rx≈6.25 mR_x \approx 6.25\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out t2=…t^2 = \dots as an explicit intermediate line whenever isolating time from quadratic kinematics.

  • Perform a quick dimensional check on algebraic expressions before entering numbers into your calculator.

  • Practice solving mixed projectile motion problems where you isolate time from vertical fall and range from horizontal motion.

OverviewACEpath Teacher's Diagnosis

03 The student forgets the factor of 1/2 in the kinetic energy or spring potential energy formula, using k * Δy² = (1/2) * m * v².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    k⋅Δy2=12mv2+mgΔy  ⟹  v=2⋅720⋅0.1202−2⋅0.0850⋅9.80⋅0.1200.0850=15.54 m/sk \cdot \Delta y^2 = \frac{1}{2} m v^2 + m g \Delta y \implies v = \sqrt{\frac{2 \cdot 720 \cdot 0.120^2 - 2 \cdot 0.0850 \cdot 9.80 \cdot 0.120}{0.0850}} = 15.54\text{ m/s}

    Correct

    12k(Δy)2=12mv2+mgΔy\frac{1}{2} k (\Delta y)^2 = \frac{1}{2} m v^2 + m g \Delta y

    You omitted the factor of 12\frac{1}{2} from the elastic potential energy expression. The correct formula for the energy stored in a compressed spring is Us=12k(Δy)2U_s = \frac{1}{2} k (\Delta y)^2, not k(Δy)2k (\Delta y)^2.

  2. Step 2

    t=2Hg=2⋅1.609.80=0.5714 st = \sqrt{\frac{2 H}{g}} = \sqrt{\frac{2 \cdot 1.60}{9.80}} = 0.5714\text{ s}

  3. Step 3

    Rx=v⋅t=15.54⋅0.5714=8.88 mR_x = v \cdot t = 15.54 \cdot 0.5714 = 8.88\text{ m}

    Correct

    Rx=vx⋅t=(10.0625 m/s)⋅(47 s)=5.75 mR_x = v_x \cdot t = (10.0625\text{ m/s}) \cdot \left(\frac{4}{7}\text{ s}\right) = 5.75\text{ m}

    Your range formula Rx=v⋅tR_x = v \cdot t is conceptually correct, but substituting the incorrect launch speed from Step 1 produced an inaccurate final range.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that mechanical energy is conserved during the launch phase.

You included both kinetic energy and the change in gravitational potential energy in your energy balance.

You accurately calculated the free-fall time of flight using t=2Hgt = \sqrt{\frac{2H}{g}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Factor of 1/2 in Elastic Potential Energy

You wrote k⋅Δy2k \cdot \Delta y^2 instead of 12k(Δy)2\frac{1}{2} k (\Delta y)^2 when setting up the spring potential energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the formula for Hooke's law spring force (F=kΔxF = k \Delta x) or its integration with the expression for elastic potential energy (Us=12kx2U_s = \frac{1}{2} k x^2), dropping the essential 12\frac{1}{2} factor that accounts for the linearly varying force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall Elastic Potential Energy
  • Because the restoring force varies linearly from 00 to kxk x, the average force is 12kx\frac{1}{2} k x, making the stored energy Us=∫0xks ds=12kx2U_s = \int_0^x k s\,ds = \frac{1}{2} k x^2.

  • Always write down Us=12kx2U_s = \frac{1}{2} k x^2 with the 12\frac{1}{2} prefactor before substituting numerical values.

Check Dimension and Symmetry
  • Both kinetic energy 12mv2\frac{1}{2} m v^2 and elastic potential energy 12kx2\frac{1}{2} k x^2 carry a 12\frac{1}{2} factor arising from integrating a quantity proportional to the first power of displacement or velocity.

  • Verify that every quadratic energy term derived from a linear response includes its 12\frac{1}{2} factor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the corrected conservation of energy equation: 12k(Δy)2=12mv2+mgΔy\frac{1}{2} k (\Delta y)^2 = \frac{1}{2} m v^2 + m g \Delta y.

  2. Evaluate the horizontal launch speed: v=k(Δy)2−2mgΔym=720(0.120)2−2(0.0850)(9.80)(0.120)0.0850≈10.06 m/sv = \sqrt{\frac{k (\Delta y)^2 - 2 m g \Delta y}{m}} = \sqrt{\frac{720(0.120)^2 - 2(0.0850)(9.80)(0.120)}{0.0850}} \approx 10.06\text{ m/s}.

  3. Multiply the launch speed by the time of flight: Rx=v⋅t=(10.0625 m/s)⋅(0.5714 s)=5.75 mR_x = v \cdot t = (10.0625\text{ m/s}) \cdot (0.5714\text{ s}) = 5.75\text{ m}.

Final answer

Rx=5.75 mR_x = 5.75\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that you include 12\frac{1}{2} on both Us=12kx2U_s = \frac{1}{2}kx^2 and K=12mv2K = \frac{1}{2}mv^2 whenever writing an energy balance equation.

  • Practice deriving work done by a spring through W=∫kx dxW = \int kx\,dx to reinforce why the factor of 12\frac{1}{2} must be present.

Lock it in

Similar question

01

A toy ball of mass m=0.050 kgm = 0.050\text{ kg} rests on a vertical spring with k=400 N/mk = 400\text{ N/m} compressed by Δy=0.10 m\Delta y = 0.10\text{ m}. Calculate the speed of the ball at the instant the spring returns to its relaxed length. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

Using 12k(Δy)2=12mv2+mgΔy\frac{1}{2}k(\Delta y)^2 = \frac{1}{2}mv^2 + mg\Delta y: 12(400)(0.10)2=2.00 J\frac{1}{2}(400)(0.10)^2 = 2.00\text{ J}, and mgΔy=(0.050)(9.80)(0.10)=0.049 Jmg\Delta y = (0.050)(9.80)(0.10) = 0.049\text{ J}. Kinetic energy is K=2.00−0.049=1.951 JK = 2.00 - 0.049 = 1.951\text{ J}. Thus, v=2(1.951)0.050≈8.83 m/sv = \sqrt{\frac{2(1.951)}{0.050}} \approx 8.83\text{ m/s}.

02

A vertical spring gun with spring constant k=500 N/mk = 500\text{ N/m} is compressed by 0.080 m0.080\text{ m} to shoot a 0.10 kg0.10\text{ kg} projectile. The projectile exits a smooth curved tube horizontally at the spring's equilibrium height, which is 1.25 m1.25\text{ m} above the floor. Find the projectile's horizontal landing distance from the base of the platform. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

Energy conservation: 12(500)(0.080)2=12(0.10)vx2+(0.10)(9.80)(0.080)  ⟹  1.60 J=0.05vx2+0.0784 J  ⟹  vx=1.52160.05≈5.517 m/s\frac{1}{2}(500)(0.080)^2 = \frac{1}{2}(0.10)v_x^2 + (0.10)(9.80)(0.080) \implies 1.60\text{ J} = 0.05v_x^2 + 0.0784\text{ J} \implies v_x = \sqrt{\frac{1.5216}{0.05}} \approx 5.517\text{ m/s}. Time of flight: t=2(1.25)9.80≈0.505 st = \sqrt{\frac{2(1.25)}{9.80}} \approx 0.505\text{ s}. Horizontal range: R=vxt=(5.517)(0.505)≈2.79 mR = v_x t = (5.517)(0.505) \approx 2.79\text{ m}.

03

A 0.200 kg0.200\text{ kg} block is pushed against a spring (k=800 N/mk = 800\text{ N/m}) resting on a frictionless 30.0∘30.0^\circ incline, compressing it by 0.150 m0.150\text{ m} along the slope. When released, the block detaches at equilibrium and slides off the end of the incline located 2.00 m2.00\text{ m} above the ground with speed vv. Set up the energy balance and determine the speed vv upon detachment. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

Along the incline, vertical rise is Δh=Δssin⁡30.0∘=(0.150)(0.50)=0.075 m\Delta h = \Delta s \sin 30.0^\circ = (0.150)(0.50) = 0.075\text{ m}. By conservation of energy: 12k(Δs)2=12mv2+mgΔh\frac{1}{2}k(\Delta s)^2 = \frac{1}{2}mv^2 + mg\Delta h. Substituting values: 12(800)(0.150)2=9.00 J\frac{1}{2}(800)(0.150)^2 = 9.00\text{ J}, and mgΔh=(0.200)(9.80)(0.075)=0.147 Jmg\Delta h = (0.200)(9.80)(0.075) = 0.147\text{ J}. Then 12(0.200)v2=9.00−0.147=8.853 J  ⟹  v=2(8.853)0.200≈9.41 m/s\frac{1}{2}(0.200)v^2 = 9.00 - 0.147 = 8.853\text{ J} \implies v = \sqrt{\frac{2(8.853)}{0.200}} \approx 9.41\text{ m/s}.

Loading workspace…