Resources

In a laboratory penning trap, a muon (m=1.884×10−28 kgm = 1.884 \times 10^{-28}\text{ kg}, q=−1.602×10−19 Cq = -1.602 \times 10^{-19}\text{ C}) orbits perpendicularly to an adjustable uniform magnetic field BB. As the magnetic field strength is systematically attenuated toward zero, the orbital radius is constrained to not exceed the chamber radius Rmax=0.750 mR_{\text{max}} = 0.750\text{ m}. If the muon maintains a relativistic factor of γ≈1.00\gamma \approx 1.00 at a constant non-relativistic speed of v=1.20×105 m/sv = 1.20 \times 10^{5}\text{ m/s}, calculate the asymptotic lower limit of the magnetic field magnitude BminB_{\text{min}} below which the particle will collide with the chamber wall.

Answer and steps

Final answer

Bmin=1.88×10−4 TB_{\text{min}} = 1.88 \times 10^{-4}\text{ T}

Steps

01

Condition for Circular Orbit

To find the minimum magnetic field magnitude BminB_{\text{min}} required to keep the muon from hitting the chamber wall, we analyze the circular motion of a charged particle in a uniform magnetic field.

When a particle of mass mm, charge of magnitude ∣q∣|q|, and speed vv moves perpendicularly to a uniform magnetic field BB, the magnetic Lorentz force provides the necessary centripetal force:

Fmag=FcF_{\text{mag}} = F_{\text{c}}

∣q∣vB=mv2r|q|vB = \frac{m v^2}{r}

Solving for the orbital radius rr:

r=mv∣q∣Br = \frac{mv}{|q|B}

02

Constraint on the Magnetic Field

The orbital radius is inversely proportional to the magnetic field strength BB. As BB decreases, the orbital radius rr increases.

To ensure the particle stays inside the chamber without colliding with the wall, the radius must not exceed the maximum allowed radius:

r≤Rmaxr \le R_{\text{max}}

Substituting the expression for rr:

mv∣q∣B≤Rmax  ⟹  B≥mv∣q∣Rmax\frac{mv}{|q|B} \le R_{\text{max}} \implies B \ge \frac{mv}{|q|R_{\text{max}}}

The lower limit (minimum magnetic field magnitude) is reached when the orbital radius equals the chamber radius (r=Rmaxr = R_{\text{max}}):

Bmin=mv∣q∣RmaxB_{\text{min}} = \frac{mv}{|q|R_{\text{max}}}

03

Calculation

Substitute the given values into the equation:

  • m=1.884×10−28 kgm = 1.884 \times 10^{-28}\text{ kg}
  • v=1.20×105 m/sv = 1.20 \times 10^{5}\text{ m/s}
  • ∣q∣=1.602×10−19 C|q| = 1.602 \times 10^{-19}\text{ C}
  • Rmax=0.750 mR_{\text{max}} = 0.750\text{ m}

Bmin=(1.884×10−28 kg)(1.20×105 m/s)(1.602×10−19 C)(0.750 m)B_{\text{min}} = \frac{(1.884 \times 10^{-28}\text{ kg})(1.20 \times 10^{5}\text{ m/s})}{(1.602 \times 10^{-19}\text{ C})(0.750\text{ m})}

Evaluating the numerator and denominator:

mv=2.2608×10−23 kg⋅m/smv = 2.2608 \times 10^{-23}\text{ kg}\cdot\text{m/s}

∣q∣Rmax=1.2015×10−19 C⋅m|q|R_{\text{max}} = 1.2015 \times 10^{-19}\text{ C}\cdot\text{m}

Bmin=2.2608×10−231.2015×10−19≈1.88×10−4 TB_{\text{min}} = \frac{2.2608 \times 10^{-23}}{1.2015 \times 10^{-19}} \approx 1.88 \times 10^{-4}\text{ T}

Below this threshold field strength, the trajectory's radius would exceed 0.750 m0.750\text{ m}, causing the muon to strike the chamber wall.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the radius formula algebraically as B = |q|*R_max / (m*v), leading to an incorrect magnetic field strength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    FB=Fc  ⟹  q⋅v⋅B=m⋅v2RmaxF_B = F_c \implies q \cdot v \cdot B = \frac{m \cdot v^2}{R_{\text{max}}}

  2. Step 2

    B=q⋅Rmaxm⋅vB = \frac{q \cdot R_{\text{max}}}{m \cdot v}

    Correct

    B=m⋅v∣q∣⋅RmaxB = \frac{m \cdot v}{|q| \cdot R_{\text{max}}}

    When dividing both sides of qvB=mv2Rmaxq v B = \frac{m v^2}{R_{\text{max}}} by qvq v, the term mvm v remains in the numerator and qRmaxq R_{\text{max}} remains in the denominator. You accidentally inverted this expression.

  3. Step 3

    B=(1.602×10−19×0.750)(1.884×10−28×1.20×105)  ⟹  Bmin=5.31×103 TB = \frac{(1.602 \times 10^{-19} \times 0.750)}{(1.884 \times 10^{-28} \times 1.20 \times 10^5)} \implies B_{\text{min}} = 5.31 \times 10^3\text{ T}

    Correct

    Bmin=(1.884×10−28 kg)(1.20×105 m/s)(1.602×10−19 C)(0.750 m)=1.88×10−4 TB_{\text{min}} = \frac{(1.884 \times 10^{-28}\text{ kg})(1.20 \times 10^5\text{ m/s})}{(1.602 \times 10^{-19}\text{ C})(0.750\text{ m})} = 1.88 \times 10^{-4}\text{ T}

    Your numerical substitution and arithmetic correctly followed your inverted formula from Step 2, but the resulting value is inverted relative to the true minimum field strength.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the magnetic Lorentz force provides the centripetal acceleration.

You accurately substituted the chamber radius limit RmaxR_{\text{max}} into the circular motion condition.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic isolation error

You accidentally swapped the numerator and denominator when rearranging qvB=mv2/Rmaxq v B = m v^2 / R_{\text{max}} to solve for BB.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the target variable's relationship to the parameters during literal fraction rearrangement, leading to B∝RB \propto R instead of B∝1/RB \propto 1/R.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and physical check
  • As the required radius RR increases, less centripetal force and thus a weaker magnetic field BB is needed, so BB must be inversely proportional to RR.

  • Always verify that your isolated variable matches physical intuition (B∝1/RB \propto 1/R) before calculating numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the balanced force equation: ∣q∣vB=mv2Rmax|q|vB = \frac{mv^2}{R_{\text{max}}}.

  2. Divide both sides by ∣q∣v|q|v: Bmin=mv∣q∣RmaxB_{\text{min}} = \frac{mv}{|q|R_{\text{max}}}.

  3. Substitute the given numerical values: Bmin=(1.884×10−28 kg)(1.20×105 m/s)(1.602×10−19 C)(0.750 m)B_{\text{min}} = \frac{(1.884 \times 10^{-28}\text{ kg})(1.20 \times 10^5\text{ m/s})}{(1.602 \times 10^{-19}\text{ C})(0.750\text{ m})}.

  4. Evaluate the quotient: Bmin=2.2608×10−231.2015×10−19≈1.88×10−4 TB_{\text{min}} = \frac{2.2608 \times 10^{-23}}{1.2015 \times 10^{-19}} \approx 1.88 \times 10^{-4}\text{ T}.

Final answer

Bmin=1.88×10−4 TB_{\text{min}} = 1.88 \times 10^{-4}\text{ T}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables from multi-factor rational equations step-by-step without skipping intermediate reduction steps.

  • Perform a quick units check or limiting-case check (e.g., larger radius requires smaller magnetic bending field) on symbolic expressions.

OverviewACEpath Teacher's Diagnosis

02 The student squares the speed in the numerator of the magnetic field formula, calculating B_min = m*v² / (|q|*R_max).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q⋅v⋅B=m⋅v2/Rq \cdot v \cdot B = m \cdot v^2 / R

  2. Step 2

    Bmin=m⋅v2q⋅RmaxB_{\text{min}} = \frac{m \cdot v^2}{q \cdot R_{\text{max}}}

    Correct

    Bmin=mv∣q∣RmaxB_{\text{min}} = \frac{mv}{|q|R_{\text{max}}}

    When dividing both sides of qvB=mv2RqvB = \frac{mv^2}{R} by qvqv, one factor of vv cancels out. The correct numerator is linear momentum mvmv, not mv2mv^2.

  3. Step 3

    Bmin=1.884×10−28×(1.20×105)21.602×10−19×0.750  ⟹  Bmin=2.26 TB_{\text{min}} = \frac{1.884 \times 10^{-28} \times (1.20 \times 10^5)^2}{1.602 \times 10^{-19} \times 0.750} \implies B_{\text{min}} = 2.26\text{ T}

    Correct

    Bmin=(1.884×10−28 kg)(1.20×105 m/s)(1.602×10−19 C)(0.750 m)≈1.88×10−4 TB_{\text{min}} = \frac{(1.884 \times 10^{-28}\text{ kg})(1.20 \times 10^5\text{ m/s})}{(1.602 \times 10^{-19}\text{ C})(0.750\text{ m})} \approx 1.88 \times 10^{-4}\text{ T}

    Your numerical arithmetic accurately followed your formula, but the result is off by a factor of v=1.20×105 m/sv = 1.20 \times 10^5\text{ m/s} because of the uncancelled speed in step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified that the magnetic Lorentz force provides the necessary centripetal force for circular confinement.

You substituted the given physical constants accurately into your algebraic formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic cancellation error

You divided by qq rather than qvqv when isolating BB, retaining v2v^2 instead of reducing it to vv.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete algebraic isolation of the variable of interest: failing to cancel common factors on both sides of the balance equation leads to incorrect dimensional scaling.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional check of magnetic field
  • The units of magnetic field are T=NA⋅m=kgC⋅s\text{T} = \frac{\text{N}}{\text{A}\cdot\text{m}} = \frac{\text{kg}}{\text{C}\cdot\text{s}}.

  • Check the units of your isolated formula: mv∣q∣R\frac{mv}{|q|R} yields kg⋅(m/s)C⋅m=kgC⋅s=T\frac{\text{kg}\cdot(\text{m/s})}{\text{C}\cdot\text{m}} = \frac{\text{kg}}{\text{C}\cdot\text{s}} = \text{T}, whereas mv2∣q∣R\frac{mv^2}{|q|R} yields T⋅(m/s)\text{T}\cdot(\text{m/s}).

Isolating variables from product relations
  • When A⋅B=CA \cdot B = C, dividing by AA means dividing every term by AA.

  • Divide qvB=mv2RqvB = \frac{mv^2}{R} explicitly by qvqv: qvBqv=mv2R⋅qv  ⟹  B=mvqR\frac{qvB}{qv} = \frac{mv^2}{R \cdot qv} \implies B = \frac{mv}{qR}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Cancel speed vv from both sides: ∣q∣vBmin=mv2Rmax  ⟹  Bmin=mv∣q∣Rmax|q|vB_{\text{min}} = \frac{mv^2}{R_{\text{max}}} \implies B_{\text{min}} = \frac{mv}{|q|R_{\text{max}}}.

  2. Substitute the given values: Bmin=(1.884×10−28 kg)(1.20×105 m/s)(1.602×10−19 C)(0.750 m)B_{\text{min}} = \frac{(1.884 \times 10^{-28}\text{ kg})(1.20 \times 10^5\text{ m/s})}{(1.602 \times 10^{-19}\text{ C})(0.750\text{ m})}.

  3. Compute the numerator: mv=2.2608×10−23 kg⋅m/smv = 2.2608 \times 10^{-23}\text{ kg}\cdot\text{m/s}.

  4. Compute the denominator: ∣q∣Rmax=1.2015×10−19 C⋅m|q|R_{\text{max}} = 1.2015 \times 10^{-19}\text{ C}\cdot\text{m}.

  5. Divide to find the threshold magnetic field: Bmin=2.2608×10−231.2015×10−19≈1.88×10−4 TB_{\text{min}} = \frac{2.2608 \times 10^{-23}}{1.2015 \times 10^{-19}} \approx 1.88 \times 10^{-4}\text{ T}.

Final answer

Bmin=1.88×10−4 TB_{\text{min}} = 1.88 \times 10^{-4}\text{ T}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating target variables by explicitly writing out the cancellation step.

  • Perform a quick dimensional analysis whenever an isolated formula contains powers of kinematic variables.

OverviewACEpath Teacher's Diagnosis

03 The student uses the standard electron mass instead of the given muon mass, resulting in an underestimated magnetic field.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    q∗v∗B=m∗v2/Rmax⁡  ⟹  Bmin⁡=m∗vq∗Rmax⁡q * v * B = m * v^2 / R_{\max} \implies B_{\min} = \frac{m * v}{q * R_{\max}}

  2. Step 2

    Bmin⁡=9.11×10−31×1.20×1051.602×10−19×0.750B_{\min} = \frac{9.11 \times 10^{-31} \times 1.20 \times 10^5}{1.602 \times 10^{-19} \times 0.750}

    Correct

    Bmin⁡=(1.884×10−28 kg)(1.20×105 m/s)(1.602×10−19 C)(0.750 m)B_{\min} = \frac{(1.884 \times 10^{-28}\text{ kg})(1.20 \times 10^5\text{ m/s})}{(1.602 \times 10^{-19}\text{ C})(0.750\text{ m})}

    You substituted the mass of an electron (9.11×10−31 kg9.11 \times 10^{-31}\text{ kg}) instead of the given mass of the muon (1.884×10−28 kg1.884 \times 10^{-28}\text{ kg}).

  3. Step 3

    Bmin⁡=9.10×10−7 TB_{\min} = 9.10 \times 10^{-7}\text{ T}

    Correct

    Bmin⁡≈1.88×10−4 TB_{\min} \approx 1.88 \times 10^{-4}\text{ T}

    Your arithmetic on the numbers you entered was executed properly, but the result is incorrect due to the wrong mass value used in the preceding step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the magnetic Lorentz force provides the necessary centripetal force for circular motion.

You correctly isolated Bmin⁡B_{\min} algebraically in terms of the given physical quantities.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong Constant Substitution (Electron vs. Muon Mass)

You defaulted to the familiar mass of an electron (9.11×10−31 kg9.11 \times 10^{-31}\text{ kg}) instead of reading and using the problem's stated muon mass (1.884×10−28 kg1.884 \times 10^{-28}\text{ kg}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A muon shares the elementary charge with an electron but is approximately 207 times more massive. Over-relying on memorized leptonic constants without checking the problem statement led to using the mass of an electron.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Particle Identity
  • Always match the mass value to the specific particle named in the prompt (e.g., muon, proton, alpha particle) rather than defaulting to an electron.

  • Check the given parameters in the problem text before writing down numerical values.

Proportionality Check
  • B∝mB \propto m for fixed vv, qq, and rr. A heavier particle requires a proportionally stronger magnetic field to curve along the same trajectory.

  • Confirm that the calculated BB scales up with the heavier particle mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the muon mass m=1.884×10−28 kgm = 1.884 \times 10^{-28}\text{ kg}, charge magnitude ∣q∣=1.602×10−19 C|q| = 1.602 \times 10^{-19}\text{ C}, speed v=1.20×105 m/sv = 1.20 \times 10^5\text{ m/s}, and maximum radius Rmax⁡=0.750 mR_{\max} = 0.750\text{ m}:

  2. Bmin⁡=(1.884×10−28 kg)(1.20×105 m/s)(1.602×10−19 C)(0.750 m)B_{\min} = \frac{(1.884 \times 10^{-28}\text{ kg})(1.20 \times 10^5\text{ m/s})}{(1.602 \times 10^{-19}\text{ C})(0.750\text{ m})}

  3. Bmin⁡=2.2608×10−231.2015×10−19≈1.88×10−4 TB_{\min} = \frac{2.2608 \times 10^{-23}}{1.2015 \times 10^{-19}} \approx 1.88 \times 10^{-4}\text{ T}

Final answer

Bmin⁡=1.88×10−4 TB_{\min} = 1.88 \times 10^{-4}\text{ T}

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read the question carefully to identify the specific particle involved before writing down numerical constants.

  • Re-calculate the substitution using m=1.884×10−28 kgm = 1.884 \times 10^{-28}\text{ kg} to confirm the final result of 1.88×10−4 T1.88 \times 10^{-4}\text{ T}.

Lock it in

Similar question

01

An electron (m=9.11×10−31 kgm = 9.11 \times 10^{-31}\text{ kg}, q=−1.602×10−19 Cq = -1.602 \times 10^{-19}\text{ C}) travels at v=4.00×106 m/sv = 4.00 \times 10^6\text{ m/s} in a circular orbit of maximum radius Rmax=0.250 mR_{\text{max}} = 0.250\text{ m} perpendicular to a magnetic field. Find the minimum magnetic field magnitude BminB_{\text{min}}.

Answer

Bmin=9.10×10−5 TB_{\text{min}} = 9.10 \times 10^{-5}\text{ T}. Using Bmin=mv∣q∣Rmax=(9.11×10−31)(4.00×106)(1.602×10−19)(0.250)=9.10×10−5 TB_{\text{min}} = \frac{mv}{|q|R_{\text{max}}} = \frac{(9.11 \times 10^{-31})(4.00 \times 10^6)}{(1.602 \times 10^{-19})(0.250)} = 9.10 \times 10^{-5}\text{ T}.

02

A singly charged proton (m=1.673×10−27 kgm = 1.673 \times 10^{-27}\text{ kg}, q=1.602×10−19 Cq = 1.602 \times 10^{-19}\text{ C}) moves in a cyclotron chamber of radius 0.500 m0.500\text{ m} subject to a magnetic field B=0.350 TB = 0.350\text{ T}. Calculate the maximum speed vmaxv_{\text{max}} the proton can achieve before exiting the chamber radius.

Answer

vmax=1.68×107 m/sv_{\text{max}} = 1.68 \times 10^7\text{ m/s}. From qvB=mv2rqvB = \frac{mv^2}{r}, we isolate speed: v=qBrmv = \frac{qBr}{m}. Substituting values gives vmax=(1.602×10−19)(0.350)(0.500)1.673×10−27≈1.68×107 m/sv_{\text{max}} = \frac{(1.602 \times 10^{-19})(0.350)(0.500)}{1.673 \times 10^{-27}} \approx 1.68 \times 10^7\text{ m/s}.

03

An alpha particle (q=+2e=3.204×10−19 Cq = +2e = 3.204 \times 10^{-19}\text{ C}, m=6.64×10−27 kgm = 6.64 \times 10^{-27}\text{ kg}) is accelerated from rest through a potential difference V=1.20 kVV = 1.20\text{ kV} and enters a uniform magnetic field B=0.0800 TB = 0.0800\text{ T} perpendicular to its velocity. Determine the radius of its circular path.

Answer

r=0.0438 m=4.38 cmr = 0.0438\text{ m} = 4.38\text{ cm}. Kinetic energy is Ek=qV=12mv2E_k = qV = \frac{1}{2}mv^2, so v=2qVm=2(3.204×10−19)(1200)6.64×10−27≈3.40×105 m/sv = \sqrt{\frac{2qV}{m}} = \sqrt{\frac{2(3.204 \times 10^{-19})(1200)}{6.64 \times 10^{-27}}} \approx 3.40 \times 10^5\text{ m/s}. Then r=mvqB=(6.64×10−27)(3.40×105)(3.204×10−19)(0.0800)≈0.0438 mr = \frac{mv}{qB} = \frac{(6.64 \times 10^{-27})(3.40 \times 10^5)}{(3.204 \times 10^{-19})(0.0800)} \approx 0.0438\text{ m}.

Loading workspace…