Resources

Students frequently assume that because sound is an adiabatic wave involving rapid compressions and rarefactions, the speed of sound must increase if a gas is isothermally compressed to a higher pressure PP. (a) For an ideal gas with equilibrium density ρ=PMRT\rho = \frac{P M}{R T} and adiabatic bulk modulus Bad=γPB_{\text{ad}} = \gamma P, express the theoretical sound speed v=Badρv = \sqrt{\frac{B_{\text{ad}}}{\rho}} purely in terms of γ\gamma, RR, TT, and MM. (b) Helium gas (gamma=1.67\\gamma = 1.67, M=4.003×10−3 kg/molM = 4.003\times 10^{-3}\text{ kg/mol}) is initially held at P1=1.00 atmP_1 = 1.00\text{ atm} and T=300 KT = 300\text{ K}. The gas is slowly compressed at constant temperature until P2=4.00 atmP_2 = 4.00\text{ atm}. Calculate the sound speed in the helium at P1P_1 and at P2P_2, and explain why the sound speed does not quadruple.

Answer and steps

Final answer

(a) v=γRTMv = \sqrt{\frac{\gamma R T}{M}}, which is strictly independent of pressure PP at constant temperature; (b) v1=1.02×103 m/sv_1 = 1.02\times 10^3\text{ m/s}, v2=1.02×103 m/sv_2 = 1.02\times 10^3\text{ m/s}. When pressure quadruples isothermally, the equilibrium density ρ\rho also quadruples in direct proportion, so the ratio Pρ\frac{P}{\rho} remains constant.

Steps

Part (a): Theoretical Expression for the Speed of Sound

The propagation speed vv of a longitudinal sound wave in a fluid depends on the adiabatic bulk modulus BadB_{\text{ad}} (measuring the medium's elastic restoring stiffness) and its equilibrium density ρ\rho (measuring inertia):

v=Badρv = \sqrt{\frac{B_{\text{ad}}}{\rho}}

For an ideal gas undergoing rapid acoustic compressions and expansions, the adiabatic bulk modulus is related to pressure PP by:

Bad=γPB_{\text{ad}} = \gamma P

where γ\gamma is the adiabatic index (heat capacity ratio).

From the ideal gas equation of state, the mass density is given by:

ρ=PMRT\rho = \frac{P M}{R T}

where MM is the molar mass, RR is the universal gas constant, and TT is the absolute temperature.

Substitute BadB_{\text{ad}} and ρ\rho into the formula for vv:

v=γPPMRT=γP⋅RTPM=γRTMv = \sqrt{\frac{\gamma P}{\frac{P M}{R T}}} = \sqrt{\frac{\gamma P \cdot R T}{P M}} = \sqrt{\frac{\gamma R T}{M}}

The equilibrium pressure PP cancels out completely. Thus, for an ideal gas, the theoretical speed of sound depends only on the gas species (through γ\gamma and MM) and the absolute temperature TT; it is strictly independent of pressure at constant temperature.


Part (b): Numerical Calculation and Physical Explanation

Given parameters for helium gas:

  • Adiabatic index: γ=1.67\gamma = 1.67
  • Molar mass: M=4.003×10−3 kg/molM = 4.003\times 10^{-3}\text{ kg/mol}
  • Temperature: T=300 KT = 300\text{ K}
  • Universal gas constant: R≈8.314 J/(mol⋅K)R \approx 8.314\text{ J/(mol}\cdot\text{K)}

Calculate the sound speed at the initial state (P1=1.00 atmP_1 = 1.00\text{ atm}, T=300 KT = 300\text{ K}):

v1=1.67⋅8.314 J/(mol⋅K)⋅300 K4.003×10−3 kg/mol=4165.314.003×10−3≈1.0405×106≈1.02×103 m/sv_1 = \sqrt{\frac{1.67 \cdot 8.314\text{ J/(mol}\cdot\text{K)} \cdot 300\text{ K}}{4.003\times 10^{-3}\text{ kg/mol}}} = \sqrt{\frac{4165.31}{4.003\times 10^{-3}}} \approx \sqrt{1.0405\times 10^6} \approx 1.02\times 10^3\text{ m/s}

Because the compression to P2=4.00 atmP_2 = 4.00\text{ atm} occurs isothermally (TT remains 300 K300\text{ K}), the temperature does not change:

v2=γRTM=1.02×103 m/sv_2 = \sqrt{\frac{\gamma R T}{M}} = 1.02\times 10^3\text{ m/s}

Why the Speed Does Not Quadruple:

A common pitfall is noticing that the elastic restoring force increases (Bad=γPB_{\text{ad}} = \gamma P quadruples) while overlooking the inertial resistance. Under isothermal conditions:

ρ=PMRT∝P\rho = \frac{P M}{R T} \propto P

When the pressure is quadrupled, the gas molecules are compressed into one-fourth of the original volume, meaning the density ρ\rho also quadruples:

Bad,2ρ2=4Bad,14ρ1=Bad,1ρ1\frac{B_{\text{ad}, 2}}{\rho_2} = \frac{4 B_{\text{ad}, 1}}{4 \rho_1} = \frac{B_{\text{ad}, 1}}{\rho_1}

Because the increase in elastic restoring force is precisely offset by the increase in inertial mass per unit volume, the ratio Pρ\frac{P}{\rho} remains constant, and the speed of sound remains entirely unchanged.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats density as constant during the compression, concluding that sound speed is proportional to the square root of pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=Badρ=γPPMRT=γRTMv = \sqrt{\frac{B_{\text{ad}}}{\rho}} = \sqrt{\frac{\gamma P}{\frac{P M}{R T}}} = \sqrt{\frac{\gamma R T}{M}}

  2. Step 2

    v1=1.67×8.314×3004.003×10−3=1020 m/sv_1 = \sqrt{\frac{1.67 \times 8.314 \times 300}{4.003 \times 10^{-3}}} = 1020\text{ m/s}

  3. Step 3

    v2=v1×P2P1=1020×4.001.00=2040 m/sv_2 = v_1 \times \sqrt{\frac{P_2}{P_1}} = 1020 \times \sqrt{\frac{4.00}{1.00}} = 2040\text{ m/s}

    Correct

    v2=γRTM=1020 m/sv_2 = \sqrt{\frac{\gamma R T}{M}} = 1020\text{ m/s}

    Because the compression is isothermal, the temperature remains T=300 KT = 300\text{ K}. Your derivation in part (a) showed that vv does not depend on pressure at constant temperature, so v2v_2 remains equal to v1v_1.

  4. Step 4

    The sound speed does not quadruple because sound speed depends on the square root of pressure rather than pressure directly.

    Correct

    The sound speed does not quadruple because when pressure quadruples isothermally, density quadruples by the same factor, so the ratio Pρ\frac{P}{\rho} and the sound speed remain constant.

    Sound speed in an ideal gas does not scale with P\sqrt{P}. While stiffness (Bad=γPB_{\text{ad}} = \gamma P) increases by a factor of 44, the inertia (density ρ\rho) also increases by a factor of 44, so their ratio is unchanged.

WHAT YOU DID WELL
Compliments from Your Teacher

You algebraically simplified the ratio Badρ\frac{B_{\text{ad}}}{\rho} into the standard ideal gas relation v=γRTMv = \sqrt{\frac{\gamma R T}{M}}.

You accurately substituted the thermodynamic values to calculate v1=1020 m/sv_1 = 1020\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Assuming sound speed depends on pressure at constant temperature

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated density as constant during compression rather than recognizing that density is directly proportional to pressure under isothermal conditions, causing you to assume v∝Pv \propto \sqrt{P} despite having proven in part (a) that pressure cancels out.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate Temperature Dependence
  • For an ideal gas, the sound speed is v=γRTMv = \sqrt{\frac{\gamma R T}{M}}, which depends only on temperature and gas species.

  • Check whether temperature changes during the process; if TT is constant, vv cannot change.

Account for Density Changes
  • From ρ=PMRT\rho = \frac{PM}{RT}, isothermal compression increases density by the exact same ratio as pressure.

  • Remember that both the elastic restoring modulus (BadB_{\text{ad}}) and inertial density (ρ\rho) scale together by PP, so their ratio Badρ\frac{B_{\text{ad}}}{\rho} is invariant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Note that the gas is compressed at constant temperature, so T2=T1=300 KT_2 = T_1 = 300\text{ K}.

  2. Apply the formula derived in part (a): v2=γRT2Mv_2 = \sqrt{\frac{\gamma R T_2}{M}}.

  3. Substitute the constant temperature to obtain v2=1020 m/sv_2 = 1020\text{ m/s}.

  4. Explain that isothermal compression increases density ρ\rho by a factor of 44 alongside pressure PP, exactly balancing the increased stiffness.

Final answer

v1=1.02×103 m/sv_1 = 1.02\times 10^3\text{ m/s} and v2=1.02×103 m/sv_2 = 1.02\times 10^3\text{ m/s}. The speed does not quadruple because the fourfold increase in elastic stiffness (BadB_{\text{ad}}) is exactly offset by a fourfold increase in inertial density (ρ\rho), keeping the ratio Badρ\frac{B_{\text{ad}}}{\rho} constant.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how the ideal gas law links pressure and density when volume changes at constant temperature.

  • Practice checking whether your final qualitative explanations remain consistent with the algebraic formulas you derived in earlier parts of the same problem.

OverviewACEpath Teacher's Diagnosis

02 The student confuses molar mass in kg/mol with g/mol, omitting the factor of 10⁻³ when evaluating the sound speed formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=Badρ=γPPMRT=γRTMv = \sqrt{\frac{B_{\text{ad}}}{\rho}} = \sqrt{\frac{\gamma P}{\frac{PM}{RT}}} = \sqrt{\frac{\gamma RT}{M}}

  2. Step 2

    v1=1.67×8.314×3004.003=32.3 m/sv_1 = \sqrt{\frac{1.67 \times 8.314 \times 300}{4.003}} = 32.3\text{ m/s}

    Correct

    v1=1.67×8.314×3004.003×10−3≈1.02×103 m/sv_1 = \sqrt{\frac{1.67 \times 8.314 \times 300}{4.003 \times 10^{-3}}} \approx 1.02 \times 10^3\text{ m/s}

    You substituted M=4.003M = 4.003 instead of converting to standard SI units: M=4.003×10−3 kg/molM = 4.003 \times 10^{-3}\text{ kg/mol}. In SI units, the speed of sound evaluates to approximately 1.02×103 m/s1.02 \times 10^3\text{ m/s}.

  3. Step 3

    Because T=300 K is constant, v2=v1=32.3 m/s\text{Because } T = 300\text{ K}\text{ is constant, } v_2 = v_1 = 32.3\text{ m/s}

    Correct

    v2=v1≈1.02×103 m/sv_2 = v_1 \approx 1.02 \times 10^3\text{ m/s}

    Your reasoning that v2=v1v_2 = v_1 because the temperature remains constant is completely sound, but the numerical value inherits the unit conversion error from the previous step.

  4. Step 4

    The sound speed does not quadruple because density increases by the same factor as pressure, leaving the ratio Bad/ρ unchanged.\text{The sound speed does not quadruple because density increases by the same factor as pressure, leaving the ratio } B_{\text{ad}}/\rho\text{ unchanged.}

WHAT YOU DID WELL
Compliments from Your Teacher

You derived the theoretical expression for the speed of sound in an ideal gas with complete mathematical rigor.

You recognized that temperature is the sole determinant of sound speed for a given ideal gas, meaning v2=v1v_2 = v_1.

You provided a clear physical explanation of how density and adiabatic bulk modulus scale together during isothermal compression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion

You omitted the factor of 10−310^{-3} in the molar mass, using 4.003 g/mol4.003\text{ g/mol} directly instead of converting to kg/mol\text{kg/mol}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the requirement that molar mass MM in thermodynamic velocity formulas (v=γRTMv = \sqrt{\frac{\gamma RT}{M}} or vrms=3RTMv_{\text{rms}} = \sqrt{\frac{3RT}{M}}) must be expressed in SI base units (kg/mol\text{kg/mol}) to yield velocities in m/s\text{m/s}.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Units in Gas Formulas
  • Whenever using R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} to calculate speeds, MM must be in kg/mol\text{kg/mol}, not g/mol\text{g/mol}.

  • Always check whether the given molar mass has been multiplied by 10−3 kg/mol10^{-3}\text{ kg/mol} before taking the square root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute M=4.003×10−3 kg/molM = 4.003 \times 10^{-3}\text{ kg/mol} into v1=γRTMv_1 = \sqrt{\frac{\gamma R T}{M}}:

  2. v1=1.67×8.314×3004.003×10−3=1.0405×106≈1.02×103 m/sv_1 = \sqrt{\frac{1.67 \times 8.314 \times 300}{4.003 \times 10^{-3}}} = \sqrt{1.0405 \times 10^6} \approx 1.02 \times 10^3\text{ m/s}

  3. Since T=300 KT = 300\text{ K} is unchanged at P2=4.00 atmP_2 = 4.00\text{ atm}:

  4. v2=v1≈1.02×103 m/sv_2 = v_1 \approx 1.02 \times 10^3\text{ m/s}

Final answer

v1=1.02×103 m/sv_1 = 1.02 \times 10^3\text{ m/s}, v2=1.02×103 m/sv_2 = 1.02 \times 10^3\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard kinetic theory formulas (vsoundv_{\text{sound}}, vrmsv_{\text{rms}}) and highlight where kg/mol\text{kg/mol} is required.

  • Practice converting periodic table atomic masses directly into kg/mol\text{kg/mol} before plugging values into equations.

OverviewACEpath Teacher's Diagnosis

03 The student assumes sound speed is directly proportional to pressure based on B_ad = γP, overlooking the square root and the change in density.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v=γPPM/(RT)=γRTMv = \sqrt{\frac{\gamma P}{P M / (R T)}} = \sqrt{\frac{\gamma R T}{M}}

  2. Step 2

    v1=1.67×8.314×3004.003×10−3=1020 m/sv_1 = \sqrt{\frac{1.67 \times 8.314 \times 300}{4.003 \times 10^{-3}}} = 1020\text{ m/s}

  3. Step 3

    v2=(P2P1)×v1=4.00×1020 m/s=4080 m/s  ⟹  v_2 = \left(\frac{P_2}{P_1}\right) \times v_1 = 4.00 \times 1020\text{ m/s} = 4080\text{ m/s} \implies The sound speed actually quadruples because the pressure quadruples from 1.00 atm1.00\text{ atm} to 4.00 atm4.00\text{ atm}.

    Correct

    v2=γRTM=1.02×103 m/sv_2 = \sqrt{\frac{\gamma R T}{M}} = 1.02 \times 10^3\text{ m/s}

    Because the compression is isothermal, the temperature remains constant at T=300 KT = 300\text{ K}. Since v=γRTMv = \sqrt{\frac{\gamma R T}{M}} does not depend on pressure, v2=v1=1020 m/sv_2 = v_1 = 1020\text{ m/s}. When pressure quadruples, density ρ\rho also quadruples, so the ratio Badρ=γPρ\frac{B_{\text{ad}}}{\rho} = \frac{\gamma P}{\rho} remains constant.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly simplified the speed of sound formula to demonstrate that pressure cancels out algebraically.

You accurately computed the numerical value of v1v_1 using the correct physical constants.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Isothermal sound speed pressure independence overlooked

You reverted to an intuitive assumption that sound speed is proportional to pressure, contradicting your own derived formula showing that vv depends only on temperature for an ideal gas.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the fact that isothermal compression increases mass density ρ\rho by the exact same factor as the adiabatic bulk modulus Bad=γPB_{\text{ad}} = \gamma P, leaving the wave propagation speed v=Bad/ρv = \sqrt{B_{\text{ad}}/\rho} unchanged.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Functional Dependence
  • For an ideal gas, the sound speed is v=γRTMv = \sqrt{\frac{\gamma R T}{M}}, which depends exclusively on absolute temperature TT and the gas species.

  • Trust your derived formula: if a variable like PP canceled out, changing that variable at constant temperature cannot change vv.

Balance Stiffness and Inertia
  • Sound speed depends on the ratio of elastic stiffness to inertia: v=Bρv = \sqrt{\frac{B}{\rho}}.

  • When considering an increase in pressure, verify how density changes. Under isothermal conditions, ρ∝P\rho \propto P, so stiffness and inertia scale together.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Notice from part (a) that v=γRTMv = \sqrt{\frac{\gamma R T}{M}}, which contains no pressure term PP.

  2. Since the gas is compressed isothermally, the temperature remains constant at T=300 KT = 300\text{ K}.

  3. Therefore, the sound speed at P2=4.00 atmP_2 = 4.00\text{ atm} is identical to that at P1P_1: v2=v1=1.02×103 m/sv_2 = v_1 = 1.02 \times 10^3\text{ m/s}.

  4. Physically, as pressure quadruples, the equilibrium density ρ=PMRT\rho = \frac{P M}{R T} also quadruples, keeping Badρ=γPρ\frac{B_{\text{ad}}}{\rho} = \frac{\gamma P}{\rho} constant.

Final answer

v1=1.02×103 m/sv_1 = 1.02 \times 10^3\text{ m/s}, v2=1.02×103 m/sv_2 = 1.02 \times 10^3\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how the ideal gas law links pressure and density under isothermal vs. adiabatic conditions.

  • Practice identifying when the ratio of restoring force to inertia remains invariant during state changes.

Lock it in

Similar question

01

An ideal diatomic gas (γ=1.40\gamma = 1.40) at T=280 KT = 280\text{ K} has its pressure halved while being kept at constant temperature. If the initial speed of sound is 340 m/s340\text{ m/s}, determine its final speed of sound and explain the result in terms of density and bulk modulus.

Answer

The final speed is 340 m/s340\text{ m/s}. In an isothermal expansion, pressure halves (BadB_{\text{ad}} halves), but density ρ=PMRT\rho = \frac{PM}{RT} also halves. Because the ratio Badρ\frac{B_{\text{ad}}}{\rho} remains constant, the speed of sound v=γRTMv = \sqrt{\frac{\gamma R T}{M}} does not change.

02

A cylinder contains argon gas (M=40.0×10−3 kg/molM = 40.0\times 10^{-3}\text{ kg/mol}, γ=1.67\gamma = 1.67) at P1=1.00 atmP_1 = 1.00\text{ atm} and T1=300 KT_1 = 300\text{ K}. The gas is heated at constant volume until its pressure reaches P2=2.00 atmP_2 = 2.00\text{ atm}. Calculate the final speed of sound in the gas.

Answer

Since volume is constant, P∝TP \propto T, so T2=T1(P2P1)=300 K×2=600 KT_2 = T_1 \left(\frac{P_2}{P_1}\right) = 300\text{ K} \times 2 = 600\text{ K}. The final speed is v2=γRT2M=1.67×8.314×60040.0×10−3≈456 m/sv_2 = \sqrt{\frac{\gamma R T_2}{M}} = \sqrt{\frac{1.67 \times 8.314 \times 600}{40.0\times 10^{-3}}} \approx 456\text{ m/s} (an increase by a factor of 2\sqrt{2}).

03

A sound wave travels through an unknown ideal gas at T=300 KT = 300\text{ K} with speed v=349 m/sv = 349\text{ m/s}. The gas undergoes an adiabatic compression such that its absolute temperature increases by 44%44\%. (a) Determine the new speed of sound. (b) Contrast this with an isothermal compression to the same final pressure.

Answer

(a) Sound speed scales as v∝Tv \propto \sqrt{T}. With T2=1.44T1T_2 = 1.44 T_1, v2=v11.44=1.20×349 m/s≈419 m/sv_2 = v_1 \sqrt{1.44} = 1.20 \times 349\text{ m/s} \approx 419\text{ m/s}. (b) In an isothermal compression, temperature is unchanged, so the sound speed would remain strictly at 349 m/s349\text{ m/s} regardless of pressure.

Loading workspace…